19
« : 10.03.06 - klo:15.14 »
Nyt kun päivitin dapperia niin yllättäen tuo kortti lakkasi toimimasta. Tvtime eikä kdetv löydä yhtään kanavaa. Kerran ennemminkin se teki tuon -> silloin asensin ubuntun uudestaan ja päivityksen jälkeen asensin tuon kortin yllä olevan ohjeen mukaan.Hyvin se toimi tähän aamuun asti.
(Voisiko tuo uusi kerneli vaikuttaa tähän? Aamulla latasin 2.6.15-18-k7 koneelle ja sen jälkeen alkoi ongelmat..Edellisellä kerralla päivitin tuohon 2.6.15-17-k7 ja heti sen jälkeen kanavat katosi). Käynnistäminen tuolla vanhalla 2.6.15-17-k7 ei auta.
dmesg tulostaa bttv:stä näin:
[4294683.021000] bttv: driver version 0.9.16 loaded
[4294683.021000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294683.022000] bttv: Bt8xx card found (0).
[4294683.022000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 185
[4294683.022000] bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 185, latency: 32, mmio: 0xdddfe000
[4294683.022000] bttv0: using: Conceptronic CTVFMi v2 [card=137,insmod option]
[4294683.022000] bttv0: gpio: en=00000000, out=00000000 in=007fffff [init]
[4294683.022000] i2c-algo-bit.o: (0) scl=1, sda=1
[4294683.022000] i2c-algo-bit.o: (1) scl=1, sda=0
[4294683.022000] i2c-algo-bit.o: (2) scl=1, sda=1
[4294683.022000] i2c-algo-bit.o: (3) scl=0, sda=1
[4294683.022000] i2c-algo-bit.o: (4) scl=1, sda=1
[4294683.022000] i2c-algo-bit.o: bt878 #0 [sw] passed test.
[4294683.024000] bttv0: using tuner=38
[4294683.024000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294683.027000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294683.029000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294683.031000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[4294683.037000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294683.747000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294683.758000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7304
[4294683.758000] usbcore: registered new driver usblp
[4294683.758000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[4294683.861000] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
[4294683.873000] tuner 0-0060: TEA5767 detected.
[4294683.873000] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
[4294683.873000] tuner 0-0060: type set to 62 (Philips TEA5767HN FM Radio)
[4294683.874000] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
[4294683.874000] tuner 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[4294683.906000] bttv0: registered device video0
[4294683.906000] bttv0: registered device vbi0
[4294683.906000] bttv0: registered device radio0
[4294683.906000] bttv0: PLL: 28636363 => 35468950 .. ok
[4294683.933000] bttv0: add subdevice "remote0"
...
[4294684.207000] bt878: AUDIO driver version 0.0.0 loaded
[4294684.207000] bt878: Bt878 AUDIO function found (0).
[4294684.207000] bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 185, latency: 32, memory: 0xdddff000
...
[4295069.196000] bttv0: PLL can sleep, using XTAL (28636363).
[4295078.366000] bttv0: PLL: 28636363 => 35468950 .. ok
[4295363.195000] bttv0: PLL can sleep, using XTAL (28636363).
[4295370.106000] bttv0: PLL: 28636363 => 35468950 .. ok