Ok, lähdetääs kokeilemaan:
lsusb -t/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
|__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=snd-usb-audio, 480M
|__ Port 3: Dev 3, If 1, Class=Vendor Specific Class, Driver=snd-usb-audio, 480M
|__ Port 3: Dev 3, If 2, Class=Vendor Specific Class, Driver=snd-usb-audio, 480M
|__ Port 3: Dev 3, If 3, Class=Vendor Specific Class, Driver=snd-usb-audio, 480M
|__ Port 5: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 5: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 8: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 8: Dev 5, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M
Lyhyellä ala-asteen koululla tuosta päätellen rtirq-hässäkkä näyttää nyt tältä:
#
# Copyright (C) 2004-2015, rncbc aka Rui Nuno Capela.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
# /etc/sysconfig/rtirq
# /etc/default/rtirq
#
# Configuration for IRQ thread tunning,
# for realtime-preempt enabled kernels.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 or later.
#
# IRQ thread service names
# (space separated list, from higher to lower priority).
# RTIRQ_NAME_LIST="rtc snd usb i8042" # old
RTIRQ_NAME_LIST="rtc usb3 snd"
# Highest priority.
RTIRQ_PRIO_HIGH=90
# Priority decrease step.
RTIRQ_PRIO_DECR=5
# Lowest priority.
RTIRQ_PRIO_LOW=51
# Whether to reset all IRQ threads to SCHED_OTHER.
RTIRQ_RESET_ALL=0
# On kernel configurations that support it,
# which services should be NOT threaded
# (space separated list).
RTIRQ_NON_THREADED="rtc snd"
# Process names which will be forced to the
# highest realtime priority range (99-91)
# (space separated list, from highest to lower priority).
# RTIRQ_HIGH_LIST="timer"Ja öh sitten tuonne /lib/udev/rules.d/40-timer-permissions.ruleson heitetty
KERNEL=="rtc0", GROUP="audio"
KERNEL=="hpet", GROUP="audio"sitten sudo gedit /etc/default/grubja se näyttää sit tältä
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="threadirqs"
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
Buuttauksen jälkeen audioscripti kertoo tällaista:
== GUI-enabled checks ==
Checking if you are root... no - good
Checking filesystem 'noatime' parameter... 4.2.0 kernel - good
(relatime is default since 2.6.30)
Checking CPU Governors... CPU 0: 'performance' CPU 1: 'performance' CPU 2: 'performance' CPU 3: 'performance' CPU 4: 'performance' CPU 5: 'performance' CPU 6: 'performance' CPU 7: 'performance' - good
Checking swappiness... 60 - not good
** vm.swappiness is larger than 10
set it with '/sbin/sysctl -w vm.swappiness=10'
See also: http://linuxmusicians.com/viewtopic.php?f=27&t=452&start=30#p8916
Checking for resource-intensive background processes... none found - good
Checking checking sysctl inotify max_user_watches... < 524288 - not good
increase max_user_watches by adding 'fs.inotify.max_user_watches = 524288' to /etc/sysctl.conf and rebooting
For more information, see http://wiki.linuxaudio.org/wiki/system_configuration#sysctlconf
Checking access to the high precision event timer... readable - good
Checking access to the real-time clock... readable - good
Checking whether you're in the 'audio' group... yes - good
Checking for multiple 'audio' groups... no - good
Checking the ability to prioritize processes with chrt... yes - good
Checking kernel support for high resolution timers... found - good
Kernel with Real-Time Preemption... not found - not good
Kernel without real-time capabilities found
For more information, see http://wiki.linuxaudio.org/wiki/system_configuration#installing_a_real-time_kernel
Checking if kernel system timer is set to 1000 hz... found - good
Checking kernel support for tickless timer... found - good
== Other checks ==
Checking filesystem types... ok.
not found.
** Warning: no tmpfs partition mounted on /tmp
For more information, see:
- http://wiki.linuxaudio.org/wiki/system_configuration#tmpfs
- http://lowlatency.linuxaudio.org
** Set $SOUND_CARD_IRQ to the IRQ of your soundcard to enable more checks.
Find your sound card's IRQ by looking at '/proc/interrupts' and lspci.
