Kirjoittaja Aihe: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)  (Luettu 12272 kertaa)

uggeli

  • Käyttäjä
  • Viestejä: 351
    • Profiili
Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« : 29.07.13 - klo:15.35 »
Eli kuinka saada Windows 7/8 yhdistämään Samba serveriin?

Olen seurannut asetusten laitossa näitä ohjeita:

Ensin tämän mukaan:

http://simonthepiman.com/how_to_setup_windows_file_server.php

Johon soveltanut osin ubuntuwikin ohjetta, sekä mikaweb sivuston:

http://koti.mbnet.fi/micu/raspberrytut3.htm

Tuosta vain samba osuus..

Windows koneeseen taasen olen koettanut:

http://superuser.com/questions/115337/windows-7-connecting-to-samba-shares

sekä:

http://wiki.samba.org/index.php/Windows7

Molemmat asetukset olen muuttanut (ekan linkin ohjeessa kohdat 3&4, toisen linkin mainitsemat kohdat olivat valmiiksi kuten ohjeistettu, arvossa 1). Samba versio taisi olla 3.6.6


Nyt jos Windowsilla yritän muodostaa yhteyttä Raspberryn Sambajakoon \\192.168.1.200\Verkkojako kysyy Windowsin suojaus käyttäjätunnusta ja salasanaa MUTTA heti perään tulee ruudun alaosaan ilmoitus Käyttö estetty, sekä mahdollisuus käyttää toista tiliä.



Ohessa vielä samban asetukset:

Koodia: [Valitse]
smb.conf

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of


   workgroup = WORKGROUP
   server string = %h server (Samba, Rpi)
   dns proxy = no

# server string is the equivalent of the NT Description field
   server string = %h server

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
    interfaces = 192.168.1.200/24 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
    bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
    security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# The following parameter makes sure that only "username" can connect
# to \\server\username
# This might need tweaking when using external authentication schemes
   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

;[printers]
;   comment = All Printers
;   browseable = no
;   path = /var/spool/samba
;   printable = yes
;   guest ok = no
;   read only = yes
;   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
;[print$]
;   comment = Printer Drivers
;   path = /var/lib/samba/printers
;   browseable = yes
;   read only = yes
;   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#       cdrom share is accesed. For this to work /etc/fstab must contain
#       an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#       is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[Verkkojako]
comment = Verkkolevy
path = /media/hd1/Verkkojako
writeable = Yes
only guest = Yes
create mask = 0777
directory mask = 0777
browseable = Yes
public = yes

Mikähän tässä mättää?
Linux: Be root
Windows: Reboot

kamara

  • Käyttäjä
  • Viestejä: 2944
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #1 : 29.07.13 - klo:21.32 »
Itse en jaksanut tapella samban asetusten kanssa, vaan kytkin rasbinin ssh-serverillä tätä ohjetta käyttäen:
http://wiki.ubuntu-fi.org/ssh-palvelin

Ja on turvallisempikin tapa kytkeä kuin tuo samba.

Windows-koneilla ssh-clienttinä voi toimia putty.

Edit - Hidashan tämä tapa tietenkin on, mutta mihinkäs sitä kiirettä on.

uggeli

  • Käyttäjä
  • Viestejä: 351
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #2 : 30.07.13 - klo:01.18 »
Kiitos, mutta taidetaan puhua hieman eri asiasta. Itse olen kasaamassa NAS systeemiä, kuten ensimmäisestä linkistäni saattoi päätellä. SSH toki on kunnossa, mutta ei ubuntu suomen ohjeiden mukaan, vaan kannattaa kytkeä päälle heti Raspberry Pi:n ekassa käynnistyksessä, kun config ikkuna aukeaa:

http://koti.mbnet.fi/micu/raspberrytut1.htm

Kaikki asetukset käyttöönoton jälkeen olen tehnyt Putty Tray ohjelman kautta, eli SSH toimii kyllä hyvin Raspberryn kiinteään IP osoitteeseen...


Mitä tulee taasen ylläpidon päätökseen siirtää tämä aihe tänne, niin sitä hieman kummastelen. Ongelmani on nimenomaan Samba / Windows (7/8) asetusten hakemisessa. Epäilisin että Windows päässä pitäisi vielä jotain muuttaa.. Ok, samba versioni jota Rasbian käyttää lieneee vanhempi kuin tuoreempien Ubuntuversioiden MUTTA. Jos käyttäisinkin vanhaa ubuntuversiota jossa olisi tämä sama samba versio, niin siirrettäisiinkö aihe tähän osioon siksi kun ubuntuversio on vanha? Tuskin... No eipä tuosta enempiä, välillä vaan ihmetyttää turhankin kova into siirrellä, mutta vähäisempi into vastailla, mikäli tietoa modeilta löytyy.
Linux: Be root
Windows: Reboot

putte prossu

  • Käyttäjä
  • Viestejä: 143
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #3 : 30.07.13 - klo:09.25 »
Jätä tuo Verkkojako pois ja yhdistä pelkästää \\192.168.1.200 tai \\hostname.
AMD FX-4100, Sabertooth 990FX R2.0, 8GB Kingston ECC DDR3, Radeon 5770 1GB, 240GB SSD + 5x 2TB raid5, Debian 9.

uggeli

  • Käyttäjä
  • Viestejä: 351
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #4 : 30.07.13 - klo:12.05 »
Jätä tuo Verkkojako pois ja yhdistä pelkästää \\192.168.1.200 tai \\hostname.

Unohdin mainita, että tuotakin kokeiltu, sama lopputulos.. Vaikuttaisi että itse samba olisi kunnossa (kysyy kuitenkin käyttäjätunnuksen ja salasanan), joten vika olisi Windows koneessa / koneissa.. Vai onko väärä olettamus?
Linux: Be root
Windows: Reboot

putte prossu

  • Käyttäjä
  • Viestejä: 143
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #5 : 30.07.13 - klo:13.13 »
Oli sen verta sekavat nuo tutot etten jaksanut niitä lukea mutta lisättiinhän noissa käyttäjä samban tietokantaan (smbpasswd -a käyttäjänimi)? Tuo jako kun ei toimi pelkästään normaali linux-käyttäjätilillä.
Lisäksi voisit ainakin testimielessä tässä vaiheessa laittaa [homes] browseable = yes ja katsoa tuleeko edes kotikansio jakoon.
Kannattaa myös tehdä testikansio minimaalisilla parametreillä esim:

Koodia: [Valitse]
[Testikansio]
comment = Testikansio
path = /testikansio
browseable = yes
valid users = oma_käyttäjänimi

Itse olen useamman samba-tiedostopalvelimen pystyttänyt ja Windowssin pää on toiminut aina täysin ilman säätöä ja Linuxin päässäkin ongelmat on ollut aina käyttäjästä johtuvia ;D
AMD FX-4100, Sabertooth 990FX R2.0, 8GB Kingston ECC DDR3, Radeon 5770 1GB, 240GB SSD + 5x 2TB raid5, Debian 9.

uggeli

  • Käyttäjä
  • Viestejä: 351
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #6 : 30.07.13 - klo:13.41 »
Kokeilin tuossa välissä muuttaa security = share ( jako määrittelyyn force user = pi sekä force group = users, kuten eräässä ohjeessa) ja käynnistin samban uudestaan. Ei vaikutusta tuollakaan..

Nyt palautin arvot ennalleen ja testasin tuota mitä kehoitit, valid users kohtaan laitoin validusers = widowskäyttäjätunnus, pi

Nyt sekä Homes, Testikansio, että Verkkojako näkyvät windowsissa. Salasanaa ei kysytty.

homes kansion klikkaaminen tuo ikkunan:

Windows ei voi käyttää kohdetta \\raspberrypi\homes

Testikansion klikkaaminen tuo näyttöön saman salasanakyseyruudun kuin aiemminkin (mihin olen aiemmin yrittänyt syöttää pi ja sen salasanaa.. siis salasanaa jonka olen määrittänyt ko tunnukselle smbpasswd -a käyttäjänimi komennolla jo aiemmin).. Kuinka ollakaan, tähän kansioon pääsee käsiksi syöttämällä tunnuksen ja salasanan..

Verkkojako kansio ei kysy (ei kysynyt ennen edellisen kohdan salasanan syöttöäkään) mitään salasanaa, mutta näyttää kyllä Verkkojako kansion.
Linux: Be root
Windows: Reboot

putte prossu

  • Käyttäjä
  • Viestejä: 143
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #7 : 30.07.13 - klo:14.07 »
Verkkojako kansio ei kysy (ei kysynyt ennen edellisen kohdan salasanan syöttöäkään) mitään salasanaa, mutta näyttää kyllä Verkkojako kansion.

Johtuisiko tästä:
Koodia: [Valitse]
only guest = Yes?

Kannattaa varmaan siihen verkkojako-kansioonkin laittaa aluksi minimaaliset settaukset ja sitten yksitellen lisäillä noita haluttuja parametrejä niin tietää ainakin mikä sen rikkoo, jos rikkoo :)
AMD FX-4100, Sabertooth 990FX R2.0, 8GB Kingston ECC DDR3, Radeon 5770 1GB, 240GB SSD + 5x 2TB raid5, Debian 9.

uggeli

  • Käyttäjä
  • Viestejä: 351
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #8 : 30.07.13 - klo:14.41 »
Ei hjummarra.. Karsin tuota niin, että jäljelle jäi enää

[Verkkojako]
comment = Verkkolevy
path = /media/hd1/Verkkojako
browseable = Yes
valid users = pi

Mutta ei vaan toimi noinkaan..


Edit: Jako näköjään lähtee toimimaan kun ottaa tuosta [homes] osiosta kommentoitimerkit pois.. Mutta miksi se vaikuttaa tuon erillisen [Verkkojako] määrittelyn toimintaan?
« Viimeksi muokattu: 30.07.13 - klo:14.46 kirjoittanut uggeli »
Linux: Be root
Windows: Reboot

oobetimer

  • Käyttäjä
  • Viestejä: 1470
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #9 : 30.07.13 - klo:19.41 »
Rasperry Pi:stä en tiedä, mutta joitain ohjeita: http://community.linuxmint.com/tutorial/view/672

http://forums.linuxmint.com/viewtopic.php?f=157&t=132018#p712624

Lainaus
[NTFS]
 path = /media/altair/NTFS
 writeable = yes
; browseable = yes
force user = altair
 guest ok = yes
« Viimeksi muokattu: 30.07.13 - klo:19.46 kirjoittanut oobetimer »
13/2/2009 and friday....

http://debian-fi.dy.fi/

qwertyy

  • Käyttäjä
  • Viestejä: 5661
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #10 : 30.07.13 - klo:20.59 »
Tästä ei nyt suoraan ole kyllä hyötyä, mutta muistaakseni omat ongelmat johtui Samban 3.?? version jälkeen tulleesta asetustiedoston muutoksesta. Nyt vielä enemmän mutua, mutta olisiko kyseessä ollut jokin seuraaviin liittyvä muutos.

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

tai näihin

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z


Muistaakseni liittyi siihen, että Win7:ssa on muutettu jotain Sambailuun liittyvää tietoturva-asetusta. Eli XP:llä taisi päästä käsiksi tiedostoihin ilman ongelmia. No kuitenkin ongelma ratkesi kun satuin etsiin tyyliin "samba shares not working in win7" ja lisäsin samban version hakutuloksiin. Eli ilmeisesti osa vanhemmista "toimivista" ohjeista, ei päde enää nykypäivänä.

Pahoittelut. Varsin puolivillainen viesti, mutta jos sattuisi tönäiseen oikeaan suuntaan. Ja nuo mainitsemani rivit, niin ne todellakin on erittäin hataraa muistelua.

*Lisäys*
http://www.techradar.com/news/networking/samba-4-share-filesystems-between-linux-and-windows-1154705

Vilkaiseppas tuolta [global] kohdan asetukset. Jotenkin alkoi tuntuun tutulta, että otin pois netbioisin pois käytöstä.
« Viimeksi muokattu: 30.07.13 - klo:21.11 kirjoittanut qwertyy »

leal

  • Käyttäjä
  • Viestejä: 246
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #11 : 31.07.13 - klo:14.29 »
Kiitos, mutta taidetaan puhua hieman eri asiasta. Itse olen kasaamassa NAS systeemiä, kuten ensimmäisestä linkistäni saattoi päätellä.

SSH:lla voi myös siirrellä tiedostoja. Filezilla esimerkki sivun alaosassa.

https://support.terranetwork.net/web/knowledgebase/139/FTP-over-SSL-and-SSH-with-FileZilla.html

uggeli

  • Käyttäjä
  • Viestejä: 351
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #12 : 31.07.13 - klo:14.45 »
Kiitos hyvistä ohjeistanne! Oli pakko pitää tuossa pikku taukoa ja keskittyä muihinkin asioihin. :) Tilanne nyt on se, että putte prossun vinkin jälkeen Samba periaatteessa toimii! Periaatteessa tosiaan siksi, että homes ja pi kansiota (jotka muuten näyttävät olevan sama kansio) olisi voinut jäädä näkymästä poiskin.. Toisaalta jos tuo häiritsee niin ainahan voi tehdä verkkolevyn, jossa osoittaa vaikka tuonne Verkkojako kansioon. Tunnuksen ja salasanan syötön jälkeen kaikki toimii ok ja voin hakemistoon tallentaakin..

Tuota force user hommaakin kokeilin, tosin hieman erilailla & tuolloin homes ei ollut jaettuna, niin ei toiminut.. Ihmeesti itselläni siis näyttää vaativan homesin jakamisen, täytyykin googlailla tätä..

Mitä windowsin asetuksiin tulee, niin ensin luulin vian olevan siinä päässä, kun helposti löytyy noita juttuja joissa Windows 7 on se ongelma.. Kokeilin niihin tarjottuja fixejä, mutta eivät muuttaneet asiaa.. Tosin ovat asetukset yhä paikoillaan nyt kun jako toimii. Toisaalta toinen kone jossa Windows 7, toimii tässävaiheessa yhtälailla, ilman puukotuksia asetuksiin.

Toki SSH toimisi myös tiedostojen siirtoon, sikäli ontuva kommentti itseltäni. Puttylla kuitekaan käsittääkseni ei kovinkaan helposti, kuten ehdotuksessa mainittiin sitä käytettävän.. SSH kuitenkaan ei ole kovin hyvin soveltuva kodin järjestelmään, jossa käyttäjiä useita.. Suurin osa haluaa tehdä asiat helposti..

Yhtä kaikki.. Jo tässä vaiheessa tekis mieli tarjota possukahvit kaikille neuvojille.. :)
Linux: Be root
Windows: Reboot

oobetimer

  • Käyttäjä
  • Viestejä: 1470
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #13 : 31.07.13 - klo:19.27 »
Samba toimii myös Windows seiskan kanssa, kun on tehnyt Samballe käyttäjän ja sambaryhmän, joilla on oikeudet samba-hakemistoihin. Ehkä ongelmasi liittyykin juuri tuohon käyttöoikeuksien puutteeseen?

http://www.youtube.com/watch?v=y1LBubixhqc
13/2/2009 and friday....

http://debian-fi.dy.fi/

uggeli

  • Käyttäjä
  • Viestejä: 351
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #14 : 01.08.13 - klo:11.21 »
Samba toimii myös Windows seiskan kanssa, kun on tehnyt Samballe käyttäjän ja sambaryhmän, joilla on oikeudet samba-hakemistoihin. Ehkä ongelmasi liittyykin juuri tuohon käyttöoikeuksien puutteeseen?

http://www.youtube.com/watch?v=y1LBubixhqc

Kiitos! Tämä tuli tosiaan huomattua, että toisessa koneessa toimi ilman "puukotuksia", kuten mainitsin. Tosin vasta kun tuo homes oli jaettu. Tuota en muista takuuvarmasti, olenko lisännyt ryhmään smb käyttäjää, vaikka Juuri nyt en pääse testaamaan tuon asetuksia, kun en ole kotona, mutta täytyy tuota vielä testailla myöhemmin ja virittää hieman monipuolisemmaksi.. Tuolla valid users = tunnus lisäyksellä, saa kaiketi tehtyä sellaisen rakenteen, että ko jaettuun kansioon pääsee käsiksi vain tuossa mainittu käyttäjä.. Tällainen käsitys siis tällä hetkellä itselläni, mutta täytyy tukia siis vielä..

Tuota smb ryhmään lisäämistä en itse ole tainnut tehdäkään, sillä katsoessani vielä seuraamaani opastusta, annettiin siin suoraan komento sudo smbpasswd -a <olemassaoleva_linux_käyttäjätunnus>
mutta selittääkö tämä sitten sitä, että jako ei näy ilman homesin jakamista, onkin toinen juttu. :)

Paljon tässä on siis vielä sisäistettävää, mutta jonkinlainen toimivuus on jo nyt saavutettu, kiitos siitä teille! Lisään otsikoon [RATKAISTU], kunhan saan nuo viime säädötkin vielä kohdalleen.. ilmoittelen sitten täällä mistä kiikasti, josko joku toinenkin samban kanssa tuskasteleva joskus hyötyisi..
Linux: Be root
Windows: Reboot

uggeli

  • Käyttäjä
  • Viestejä: 351
    • Profiili
Vs: Windows 7/8 & Samba (Serveri Raspberr Pi:lla)
« Vastaus #15 : 20.08.13 - klo:13.33 »
Nostetaanpa vielä..

Tällä hetkellä systeemi viritetty siten, että
Koodia: [Valitse]
[Verkkojako]
comment = Verkkolevy
path = /media/hd1/Verkkojako
writeable = Yes
only guest = Yes
create mask = 0777
directory mask = 0777
browseable = Yes
public = yes

määrittelyjen sijasta jako on määritelty [homes] osaan, käyttäjätunnistus %U:n avulla (en nyt pääse tarkistamaan kun töissä taas). Homma toimii sikäli, että ylimääräisiä kansioita verkkojaossa ei näy, hämmentämässä käyttäjää. Tuossa on silti sellainen mutta, että tuon homes tekstin (jaettuna kansiona näkyy homes) soisi korvaantuvan kirjaantuneen käyttäjän mukaisella tekstillä, liekö mahdollista?

Toinen ongelma kun systeemejä käytetään siten, että jollain käyttäjätunnuksella monta käyttäjää (tyyliin lapset, jolloin käyttöaikojen määrittely tms on tarvittaessa helpompaa) ja Windows puolestaan tahtoo muistaa millä tunnuksilla verkkojakoon on kirjauduttu. Se kysyy sitä kyllä uudestaan joka kerta kun kone sammutettu (tai kirjauduttu ulos) välillä, mutta pelkkä resurssien hallinnan sammutus ei tätä "unohdusta" aiheuta. Tästä on ongelmaa etenkin, kun jakokansiona näkyy vain homes, eikä käyttäjätunnus. Sikäli muutoinkin, että toisella tunnuksella ei voi kirjautua sisään, vaikka asian tietäisi, ellei kirjaudu välillä ulos.. Onko kaikille tehävä oma käyttäjätunnuksensa myös Windows koneelle, vai voiko ongelmaa ratkaista muuten?

Kiitos

Edit: Täytynee testata tätä kunhan kotiin pääsen. Eli periaatteessa windowskoneella komento
Koodia: [Valitse]
net use /persistent:no

Toki kätevämpiäkin tapoja otetaan mielellään vastaan, kuten yhä tuon jakokansuion näkymistapa. Toki siinä oikotienä voisi olla se, että lisää vielä kunkin käyttäjän jakokansioon käyttäjän nimellä olevan kansion, jonka alle vasta loput asiat.. Mutta tämä ei kuullosta niin "oikeaoppiselta" tavalta...
« Viimeksi muokattu: 20.08.13 - klo:14.09 kirjoittanut uggeli »
Linux: Be root
Windows: Reboot