siis jos laitan tiedostoon
/etc/rc.local
seuraavat
ln -s /dev/dvb/adapter0/ca0 /dev/dvb/adapter0/ca1
ln -s /dev/dvb/adapter0/demux0 /dev/dvb/adapter0/demux1
ln -s /dev/dvb/adapter0/dvr0 /dev/dvb/adapter0/dvr1
ln -s /dev/dvb/adapter0/net0 /dev/dvb/adapter0/net1
Varmaan pitäisi laittaa adapter2:ksi tuo.. novat500on 0 ja 1, ja ct3650 on adapter 2, olenko kärryillä, vai kaukana niistä ??
Koitan pelkällä ct-3650:lla ja en saa sillä edes ilmais kanavia näkyviin, joten siinä taitaa olla jotain muutakin roplematiikkaa..
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0408:030c Quanta Computer, Inc. HP Webcam
Bus 001 Device 003: ID 187f:0201 Siano Mobile Silicon Nova B
Bus 001 Device 004: ID 0b48:300d TechnoTrend AG TT-connect CT-3650 CI
onhan se tuo ongelma mitä jo kuvailitte , mutta ainakin ilmeisesti oikein asentunut?
usb 1-2: USB disconnect, device number 5
[221733.625524] dvb-usb: bulk message failed: -19 (5/0)
[221733.625534] ttusb2: there might have been an error during control message transfer. (rlen = 1, was 0)
[221733.648538] dvb-usb: Technotrend TT-connect CT-3650 successfully deinitialized and disconnected.
[221752.020072] usb 1-2: new high-speed USB device number 6 using ehci_hcd
[221752.738056] dvb-usb: found a 'Technotrend TT-connect CT-3650' in warm state.
[221752.739903] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[221752.739910] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[221752.741276] DVB: registering new adapter (Technotrend TT-connect CT-3650)
[221752.750741] ttusb2: CI initialized.
[221752.750756] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
[221752.763936] DVB: registering adapter 0 frontend 1 (NXP TDA10048HN DVB-T)...
[221752.764695] Registered IR keymap rc-tt-1500
[221752.764919] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-2/rc/rc2/input11
[221752.765110] rc2: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-2/rc/rc2
[221752.765118] dvb-usb: schedule remote query interval to 150 msecs.
[221752.766798] dvb-usb: Technotrend TT-connect CT-3650 successfully initialized and connected.
[221759.962005] dvb_ca adapter 0: Invalid PC card inserted
ei muutoksia, samaa näyttää edelleen, onko muita ideoita??