Matkapuhelin modemina -looped back.

[LeS]

Yritän saada bluetoothilla puhelimen kautta yhteyden webbiin.
Mutta:
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
Serial line is looped back.
Connection terminated.
Serial link disconnected.
Exit.

Mikähän tässä nyt mättää? Kaikki on moneen kertaan tarkistettu.
Puhelin on N2370 classic ja Saunalahden liittymä. Puhelimessa operaattorin asetukset.

[Taro Turtiainen]

Yritän saada bluetoothilla puhelimen kautta yhteyden webbiin.
Mutta:
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
Serial line is looped back.
Connection terminated.
Serial link disconnected.
Exit.

Mikähän tässä nyt mättää? Kaikki on moneen kertaan tarkistettu.
Puhelin on N2370 classic ja Saunalahden liittymä. Puhelimessa operaattorin asetukset.

Onkos tuo bluetooth vai usb yhteydellä?

Usb piuhan käytössä valitaan puhelimesta PC Suite ja sitten ylä-palkin nm-appletista mobiili asetukset kohdille. Sun tapauksessa Saunalahti.

Bluetooth yhteyttä käytettäessä kannattaa vaihtaa oletus bluetooth sovellus blueman:iin, siinä on monipuolisemmat hallinta osat ja sieltä valitaan sarjaportti dial-up networking.

[LeS]

Saan toki yhteyden modeemiin mutta kun sanon:

"$ pon" niin:

AT
OK
ATH
OK
ATE1
OK
Serial connection established.
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x71e684da>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x71e684da>]
sent [LCP ConfNak id=0x1 <magic 0x677088fa>]
rcvd [LCP ConfNak id=0x1 <magic 0x677088fa>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x2fd346a3>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x2fd346a3>]
sent [LCP ConfNak id=0x2 <magic 0xeb92f18e>]
rcvd [LCP ConfNak id=0x2 <magic 0xeb92f18e>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x61c231ce>]
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x61c231ce>]
sent [LCP ConfNak id=0x3 <magic 0x273ce508>]
rcvd [LCP ConfNak id=0x3 <magic 0x273ce508>]
sent [LCP ConfReq id=0x4 <asyncmap 0xa0000> <magic 0xf0b045ee>]
rcvd [LCP ConfReq id=0x4 <asyncmap 0xa0000> <magic 0xf0b045ee>]
sent [LCP ConfNak id=0x4 <magic 0xbdfa6732>]
rcvd [LCP ConfNak id=0x4 <magic 0xbdfa6732>]
sent [LCP ConfReq id=0x5 <asyncmap 0xa0000> <magic 0x10cf0e1>]
rcvd [LCP ConfReq id=0x5 <asyncmap 0xa0000> <magic 0x10cf0e1>]
sent [LCP ConfNak id=0x5 <magic 0xbc7b2115>]
rcvd [LCP ConfNak id=0x5 <magic 0xbc7b2115>]
sent [LCP ConfReq id=0x6 <asyncmap 0xa0000> <magic 0xfdf77518>]
rcvd [LCP ConfReq id=0x6 <asyncmap 0xa0000> <magic 0xfdf77518>]
sent [LCP ConfNak id=0x6 <magic 0xd8d560a4>]
rcvd [LCP ConfNak id=0x6 <magic 0xd8d560a4>]
sent [LCP ConfReq id=0x7 <asyncmap 0xa0000> <magic 0x18886ac1>]
rcvd [LCP ConfReq id=0x7 <asyncmap 0xa0000> <magic 0x18886ac1>]
sent [LCP ConfNak id=0x7 <magic 0xd8e9e3a9>]
rcvd [LCP ConfNak id=0x7 <magic 0xd8e9e3a9>]
sent [LCP ConfReq id=0x8 <asyncmap 0xa0000> <magic 0xc47f647d>]
rcvd [LCP ConfReq id=0x8 <asyncmap 0xa0000> <magic 0xc47f647d>]
sent [LCP ConfNak id=0x8 <magic 0x5c0b0d64>]
rcvd [LCP ConfNak id=0x8 <magic 0x5c0b0d64>]
sent [LCP ConfReq id=0x9 <asyncmap 0xa0000> <magic 0x56c6d49b>]
rcvd [LCP ConfReq id=0x9 <asyncmap 0xa0000> <magic 0x56c6d49b>]
sent [LCP ConfNak id=0x9 <magic 0xe85645b6>]
rcvd [LCP ConfNak id=0x9 <magic 0xe85645b6>]
sent [LCP ConfReq id=0xa <asyncmap 0xa0000> <magic 0x24bd1deb>]
rcvd [LCP ConfReq id=0xa <asyncmap 0xa0000> <magic 0x24bd1deb>]
sent [LCP ConfNak id=0xa <magic 0xc79f91d1>]
rcvd [LCP ConfNak id=0xa <magic 0xc79f91d1>]
Serial line is looped back.
sent [LCP TermReq id=0xb "Loopback detected"]
rcvd [LCP TermReq id=0xb "Loopback detected"]
sent [LCP TermAck id=0xb]
rcvd [LCP TermAck id=0xb]
Connection terminated.

Sending break to the modem
Serial link disconnected.

Enkä ymmärrä mikä tökkii. Saunalahdelta kehoittavat soittamaan maksulliseen palvelunumeroon!
Näyttäisi jotenkin kirjautumisvirheeltä tai sellaiselta.

[Taro Turtiainen]

Saan toki yhteyden modeemiin mutta kun sanon:

"$ pon" niin:

AT
OK
ATH
OK
ATE1
OK
Serial connection established.
using channel 6
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x71e684da>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0x71e684da>]
sent [LCP ConfNak id=0x1 <magic 0x677088fa>]
rcvd [LCP ConfNak id=0x1 <magic 0x677088fa>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x2fd346a3>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0xa0000> <magic 0x2fd346a3>]
sent [LCP ConfNak id=0x2 <magic 0xeb92f18e>]
rcvd [LCP ConfNak id=0x2 <magic 0xeb92f18e>]
sent [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x61c231ce>]
rcvd [LCP ConfReq id=0x3 <asyncmap 0xa0000> <magic 0x61c231ce>]
sent [LCP ConfNak id=0x3 <magic 0x273ce508>]
rcvd [LCP ConfNak id=0x3 <magic 0x273ce508>]
sent [LCP ConfReq id=0x4 <asyncmap 0xa0000> <magic 0xf0b045ee>]
rcvd [LCP ConfReq id=0x4 <asyncmap 0xa0000> <magic 0xf0b045ee>]
sent [LCP ConfNak id=0x4 <magic 0xbdfa6732>]
rcvd [LCP ConfNak id=0x4 <magic 0xbdfa6732>]
sent [LCP ConfReq id=0x5 <asyncmap 0xa0000> <magic 0x10cf0e1>]
rcvd [LCP ConfReq id=0x5 <asyncmap 0xa0000> <magic 0x10cf0e1>]
sent [LCP ConfNak id=0x5 <magic 0xbc7b2115>]
rcvd [LCP ConfNak id=0x5 <magic 0xbc7b2115>]
sent [LCP ConfReq id=0x6 <asyncmap 0xa0000> <magic 0xfdf77518>]
rcvd [LCP ConfReq id=0x6 <asyncmap 0xa0000> <magic 0xfdf77518>]
sent [LCP ConfNak id=0x6 <magic 0xd8d560a4>]
rcvd [LCP ConfNak id=0x6 <magic 0xd8d560a4>]
sent [LCP ConfReq id=0x7 <asyncmap 0xa0000> <magic 0x18886ac1>]
rcvd [LCP ConfReq id=0x7 <asyncmap 0xa0000> <magic 0x18886ac1>]
sent [LCP ConfNak id=0x7 <magic 0xd8e9e3a9>]
rcvd [LCP ConfNak id=0x7 <magic 0xd8e9e3a9>]
sent [LCP ConfReq id=0x8 <asyncmap 0xa0000> <magic 0xc47f647d>]
rcvd [LCP ConfReq id=0x8 <asyncmap 0xa0000> <magic 0xc47f647d>]
sent [LCP ConfNak id=0x8 <magic 0x5c0b0d64>]
rcvd [LCP ConfNak id=0x8 <magic 0x5c0b0d64>]
sent [LCP ConfReq id=0x9 <asyncmap 0xa0000> <magic 0x56c6d49b>]
rcvd [LCP ConfReq id=0x9 <asyncmap 0xa0000> <magic 0x56c6d49b>]
sent [LCP ConfNak id=0x9 <magic 0xe85645b6>]
rcvd [LCP ConfNak id=0x9 <magic 0xe85645b6>]
sent [LCP ConfReq id=0xa <asyncmap 0xa0000> <magic 0x24bd1deb>]
rcvd [LCP ConfReq id=0xa <asyncmap 0xa0000> <magic 0x24bd1deb>]
sent [LCP ConfNak id=0xa <magic 0xc79f91d1>]
rcvd [LCP ConfNak id=0xa <magic 0xc79f91d1>]
Serial line is looped back.
sent [LCP TermReq id=0xb "Loopback detected"]
rcvd [LCP TermReq id=0xb "Loopback detected"]
sent [LCP TermAck id=0xb]
rcvd [LCP TermAck id=0xb]
Connection terminated.

Sending break to the modem
Serial link disconnected.

Enkä ymmärrä mikä tökkii. Saunalahdelta kehoittavat soittamaan maksulliseen palvelunumeroon!
Näyttäisi jotenkin kirjautumisvirheeltä tai sellaiselta.

Joko kokeilit tuota blueman:ia???

[LeS]

Joko kokeilit tuota blueman:ia???

Ongelmaa ei ole bluetoothin kanssa. Puhelin ei näytä ymmärtävän pppd:tä joten kokeilin wvdialia ja yhteys muodostuu. Ongelma on siis ratkaistu mutta eri keinoin.
No ihan sama, kunhan toimii.