Ubuntu ei tunnista ulkoista kovalevyä

[hessan]

Minulla on Buffalon ulkoinen kovalevy, johon on tallennettu tiedostoja Windows xp:llä. Nyt Ubuntu ei tunnista sitä ollenkaan. Usb tunnnistaa kameran ja mokkulan heti. Windows xp tunnistaa ko. kovalevyn. Päätteeltä en saa levyä näkyviin, eikä se näy myöskään storage device managerissa.

Olen kokeillut kovalevyä windows xp-koneessa ja irrottanut johdot vasta koneen sammuttamisen jälkeen eikä se siitä huolimatta näy ubuntulla.

Nyt tarvitsisin ohjeita miten saan levyn toimimaan ubuntulla vai pitääkö siirtyä takaisin xp:lle. Ohjeiden pitäisi olla askel-askeleelta, että tälläinen amatööri osaa toimia.... Kiitos.

[Ilokaasu]

Millainen buffalon kovalevy? Verkkoliitännällä vai ilman? Mikä ubuntun versio? Mitä sanoo pääte kun sinne kirjoittaa lsusb kovalevyn kiinnittämisen jälkeen? Entä mitä sanoo dmesg kun olet liittänyt kovalevyn? Mikä tiedostojärjestelmä levyllä on ?

Kerro lisää niin jatketaan selvittelyä

[peran]

Lisäksi näkyykö ulkoinen kiintolevysi komennolla:

Koodia: [Valitse]

sudo fdisk -l


[samppa636]

olethan muistanut irrottaa sen kovalevyn windows-koneesta hiiren oikealla ennen sammuttamista?

[Tha-Fox]

olethan muistanut irrottaa sen kovalevyn windows-koneesta hiiren oikealla ennen sammuttamista?

Ei taida tuo olla ongelma.

Olen kokeillut kovalevyä windows xp-koneessa ja irrottanut johdot vasta koneen sammuttamisen jälkeen eikä se siitä huolimatta näy ubuntulla.

[hessan]

Buffalo ministation hd-pf250u2bk-eu, ilman verkkoliitäntää. Ubuntu 9.04. Levyn tiedostojärjestelmästä ei ole tietoa, en ole kuitenkaan itse sitä alustanut vaan se on tehtaan jäljiltä.

En ole älynnyt irrottaa kovalevyä windows-koneesta hiiren oikealla ennen sammuttamista. Pitänee vielä testata sekin konsti...




sudo fdisc -l komentoon tulee vastaus "command not found"




lsusb:

Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
mikko@mikko-desktop:~$




dmesg:

[    0.000000]  modified: 00000000fffc0000 - 0000000100000000 (reserved)
[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[    0.000000] RAMDISK: 378bb000 - 37feff18
[    0.000000] Allocated new RAMDISK: 0087b000 - 00faff18
[    0.000000] Move RAMDISK from 00000000378bb000 - 0000000037feff17 to 0087b000 - 00faff17
[    0.000000] ACPI: RSDP 000FA1F0, 0014 (r0 AMI   )
[    0.000000] ACPI: RSDT 4DFF0000, 002C (r1 AMIINT SiS645XX       10 MSFT  100000B)
[    0.000000] ACPI: FACP 4DFF0030, 0081 (r1 AMIINT SiS645XX       11 MSFT  100000B)
[    0.000000] ACPI: DSDT 4DFF0120, 36C4 (r1    SiS      645     1000 MSFT  100000D)
[    0.000000] ACPI: FACS 4DFF8000, 0040
[    0.000000] ACPI: APIC 4DFF00C0, 0058 (r1 AMIINT SiS645XX     1000 MSFT  100000B)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 363MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 00000000 - 373fe000
[    0.000000]   bootmap 00012000 - 00018e80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008760ac]    TEXT DATA BSS ==> [0000100000 - 00008760ac]
[    0.000000]   #4 [0000877000 - 000087b000]    INIT_PG_TABLE ==> [0000877000 - 000087b000]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [000087b000 - 0000faff18]      NEW RAMDISK ==> [000087b000 - 0000faff18]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] found SMP MP-table at [c00fbc20] 000fbc20
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x0004dff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0004dff0
[    0.000000] On node 0 totalpages: 319359
[    0.000000] free_area_init_node: node 0, pgdat c06c9500, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 728 pages used for memmap
[    0.000000]   HighMem zone: 92442 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 4e000000:b0c00000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 316863
[    0.000000] Kernel command line: root=UUID=da7d8477-b049-4fa8-bfdb-f0b8b63742e9 ro quiet splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2604.553 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 6389120 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 1244416k/1277888k available (4110k kernel code, 32196k reserved, 2196k data, 532k init, 372680k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.004000]       .init : 0xc0731000 - 0xc07b6000   ( 532 kB)
[    0.004000]       .data : 0xc0503b9f - 0xc0728e60   (2196 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0503b9f   (4110 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 5209.10 BogoMIPS (lpj=10418212)
[    0.004058] Security Framework initialized
[    0.004072] SELinux:  Disabled at boot.
[    0.004106] AppArmor: AppArmor initialized
[    0.004129] Mount-cache hash table entries: 512
[    0.004402] Initializing cgroup subsys ns
[    0.004414] Initializing cgroup subsys cpuacct
[    0.004419] Initializing cgroup subsys memory
[    0.004429] Initializing cgroup subsys freezer
[    0.004460] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    0.004465] CPU: L2 cache: 128K
[    0.004469] CPU: Hyper-Threading is disabled
[    0.004495] Checking 'hlt' instruction... OK.
[    0.020938] SMP alternatives: switching to UP code
[    0.208042] ACPI: Core revision 20080926
[    0.214416] ACPI: Checking initramfs for custom DSDT
[    0.546976] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.586683] CPU0: Intel(R) Celeron(R) CPU 2.60GHz stepping 09
[    0.588002] Brought up 1 CPUs
[    0.588002] Total of 1 processors activated (5209.10 BogoMIPS).
[    0.588002] CPU0 attaching NULL sched-domain.
[    0.588002] net_namespace: 776 bytes
[    0.588002] Booting paravirtualized kernel on bare hardware
[    0.588002] Time:  8:42:07  Date: 07/23/09
[    0.588002] regulator: core version 0.5
[    0.588002] NET: Registered protocol family 16
[    0.588002] EISA bus registered
[    0.588002] ACPI: bus type pci registered
[    0.588188] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
[    0.588193] PCI: Using configuration type 1 for base access
[    0.591345] ACPI: EC: Look up EC in DSDT
[    0.598508] ACPI: Interpreter enabled
[    0.598518] ACPI: (supports S0 S1 S4 S5)
[    0.598548] ACPI: Using IOAPIC for interrupt routing
[    0.605978] ACPI: No dock devices found.
[    0.606009] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.606114] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
[    0.606284] pci 0000:00:02.0: Enabling SiS 96x SMBus
[    0.606340] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f]
[    0.606410] pci 0000:00:02.5: reg 20 io port: [0xff00-0xff0f]
[    0.606470] pci 0000:00:02.7: reg 10 io port: [0xdc00-0xdcff]
[    0.606479] pci 0000:00:02.7: reg 14 io port: [0xd800-0xd87f]
[    0.606524] pci 0000:00:02.7: supports D1 D2
[    0.606526] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.606532] pci 0000:00:02.7: PME# disabled
[    0.606562] pci 0000:00:03.0: reg 10 32bit mmio: [0xdfff8000-0xdfff8fff]
[    0.606628] pci 0000:00:03.1: reg 10 32bit mmio: [0xdfff9000-0xdfff9fff]
[    0.606694] pci 0000:00:03.2: reg 10 32bit mmio: [0xdfffa000-0xdfffafff]
[    0.606774] pci 0000:00:03.3: reg 10 32bit mmio: [0xdfffb000-0xdfffbfff]
[    0.606823] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.606828] pci 0000:00:03.3: PME# disabled
[    0.606878] pci 0000:00:04.0: reg 10 io port: [0xd400-0xd4ff]
[    0.606887] pci 0000:00:04.0: reg 14 32bit mmio: [0xdfff7000-0xdfff7fff]
[    0.606922] pci 0000:00:04.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[    0.606935] pci 0000:00:04.0: supports D1 D2
[    0.606937] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.606942] pci 0000:00:04.0: PME# disabled
[    0.607047] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[    0.607055] pci 0000:01:00.0: reg 14 32bit mmio: [0xdfee0000-0xdfefffff]
[    0.607062] pci 0000:01:00.0: reg 18 io port: [0xbc00-0xbc7f]
[    0.607090] pci 0000:01:00.0: supports D1 D2
[    0.607137] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[    0.607143] pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff]
[    0.607149] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcfa00000-0xdfbfffff]
[    0.607161] bus 00 -> node 0
[    0.607177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.609460] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.609672] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.609878] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.610098] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.610305] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.610508] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15)
[    0.610734] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.610946] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.611143] ACPI: Power Resource [URP1] (off)
[    0.611214] ACPI: Power Resource [URP2] (off)
[    0.611281] ACPI: Power Resource [FDDP] (off)
[    0.611346] ACPI: Power Resource [LPTP] (off)
[    0.611522] ACPI: WMI: Mapper loaded
[    0.611948] SCSI subsystem initialized
[    0.612133] libata version 3.00 loaded.
[    0.612279] usbcore: registered new interface driver usbfs
[    0.612326] usbcore: registered new interface driver hub
[    0.612436] usbcore: registered new device driver usb
[    0.612801] PCI: Using ACPI for IRQ routing
[    0.612973] Bluetooth: Core ver 2.13
[    0.612973] NET: Registered protocol family 31
[    0.612973] Bluetooth: HCI device and connection manager initialized
[    0.612973] Bluetooth: HCI socket layer initialized
[    0.612973] NET: Registered protocol family 8
[    0.612973] NET: Registered protocol family 20
[    0.612973] NetLabel: Initializing
[    0.612973] NetLabel:  domain hash size = 128
[    0.612973] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.612973] NetLabel:  unlabeled traffic allowed by default
[    0.612973] AppArmor: AppArmor Filesystem Enabled
[    0.612973] pnp: PnP ACPI init
[    0.612973] ACPI: bus type pnp registered
[    0.619180] pnp: PnP ACPI: found 12 devices
[    0.619186] ACPI: ACPI bus type pnp unregistered
[    0.619193] PnPBIOS: Disabled by ACPI PNP
[    0.619225] system 00:01: ioport range 0x290-0x297 has been reserved
[    0.619229] system 00:01: ioport range 0x480-0x48f has been reserved
[    0.619232] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.619235] system 00:01: ioport range 0x800-0x87f has been reserved
[    0.619239] system 00:01: ioport range 0x880-0x8ff has been reserved
[    0.619242] system 00:01: ioport range 0xc00-0xc1f has been reserved
[    0.619245] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[    0.619251] system 00:01: iomem range 0xfec00000-0xfecfffff has been reserved
[    0.619254] system 00:01: iomem range 0xfee00000-0xfeefffff has been reserved
[    0.654213] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.654219] pci 0000:00:01.0:   IO window: 0xb000-0xbfff
[    0.654227] pci 0000:00:01.0:   MEM window: 0xdfd00000-0xdfefffff
[    0.654233] pci 0000:00:01.0:   PREFETCH window: 0x000000cfa00000-0x000000dfbfffff
[    0.654254] bus: 00 index 0 io port: [0x00-0xffff]
[    0.654257] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.654259] bus: 01 index 0 io port: [0xb000-0xbfff]
[    0.654262] bus: 01 index 1 mmio: [0xdfd00000-0xdfefffff]
[    0.654265] bus: 01 index 2 mmio: [0xcfa00000-0xdfbfffff]
[    0.654267] bus: 01 index 3 mmio: [0x0-0x0]
[    0.654284] NET: Registered protocol family 2
[    0.654506] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.654995] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.656319] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.656984] TCP: Hash tables configured (established 131072 bind 65536)
[    0.656991] TCP reno registered
[    0.657234] NET: Registered protocol family 1
[    0.657441] checking if image is initramfs... it is
[    1.156040] Switched to high resolution mode on CPU 0
[    1.386881] Freeing initrd memory: 7379k freed
[    1.386994] cpufreq: No nForce2 chipset.
[    1.387256] audit: initializing netlink socket (disabled)
[    1.387284] type=2000 audit(1248338527.384:1): initialized
[    1.394447] highmem bounce pool size: 64 pages
[    1.394460] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.396533] VFS: Disk quotas dquot_6.5.1
[    1.396686] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.398034] fuse init (API version 7.10)
[    1.398269] msgmni has been set to 1718
[    1.398744] alg: No test for stdrng (krng)
[    1.398799] io scheduler noop registered
[    1.398802] io scheduler anticipatory registered
[    1.398804] io scheduler deadline registered
[    1.398867] io scheduler cfq registered (default)
[    1.398978] pci 0000:01:00.0: Boot video device
[    1.402939] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.402959] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.403213] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.403218] ACPI: Power Button (FF) [PWRF]
[    1.403313] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.403318] ACPI: Power Button (CM) [PWRB]
[    1.403648] processor ACPI_CPU:00: registered as cooling_device0
[    1.406290] isapnp: Scanning for PnP cards...
[    1.760104] isapnp: No Plug & Play device found
[    1.763208] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.763358] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.764042] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.765835] brd: module loaded
[    1.766768] loop: module loaded
[    1.766974] Fixed MDIO Bus: probed
[    1.766985] PPP generic driver version 2.4.2
[    1.767144] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.767222] Driver 'sd' needs updating - please use bus_type methods
[    1.767241] Driver 'sr' needs updating - please use bus_type methods
[    1.768250] pata_sis 0000:00:02.5: version 0.5.2
[    1.768554] scsi0 : pata_sis
[    1.768807] scsi1 : pata_sis
[    1.769925] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.769930] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.948445] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[    1.948450] ata1.00: 160086528 sectors, multi 16: LBA
[    1.948705] ata1.01: ATA-6: IC35L120AVV207-0, V24OA66A, max UDMA/100
[    1.948709] ata1.01: 241254720 sectors, multi 16: LBA48
[    1.964474] ata1.00: configured for UDMA/133
[    1.988491] ata1.01: configured for UDMA/100


 dmesg jatkuu....

[hessan]

...dmesg jatkuu


[    2.160343] ata2.00: ATAPI: CD-ROM CMD5211, 0.3B, max UDMA/66
[    2.160387] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[    2.176364] ata2.00: configured for UDMA/66
[    2.192322] ata2.01: configured for UDMA/33
[    2.195025] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
[    2.195332] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB)
[    2.195406] sd 0:0:0:0: [sda] Write Protect is off
[    2.195411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.195523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.195747] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB)
[    2.195820] sd 0:0:0:0: [sda] Write Protect is off
[    2.195825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.195939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.195952]  sda: sda1 sda2 < sda5 >
[    2.227064] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.227205] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.227436] scsi 0:0:1:0: Direct-Access     ATA      IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
[    2.227709] sd 0:0:1:0: [sdb] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
[    2.227782] sd 0:0:1:0: [sdb] Write Protect is off
[    2.227786] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.227893] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.228153] sd 0:0:1:0: [sdb] 241254720 512-byte hardware sectors: (123 GB/115 GiB)
[    2.228223] sd 0:0:1:0: [sdb] Write Protect is off
[    2.228227] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    2.228333] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.228346]  sdb: sdb1
[    2.238907] sd 0:0:1:0: [sdb] Attached SCSI disk
[    2.239051] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.239554] scsi 1:0:0:0: CD-ROM            OEM      CD-ROM F566E     0.3B PQ: 0 ANSI: 5
[    2.243455] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    2.243463] Uniform CD-ROM driver Revision: 3.20
[    2.243703] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.243826] sr 1:0:0:0: Attached scsi generic sg2 type 5
[    2.247686] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[    2.252323] sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.252532] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    2.252667] sr 1:0:1:0: Attached scsi generic sg3 type 5
[    2.252978] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.253056] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    2.253103] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    2.253265] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[    2.253326] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
[    2.253352] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdfffb000
[    2.264032] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    2.264199] usb usb1: configuration #1 chosen from 1 choice
[    2.264269] hub 1-0:1.0: USB hub found
[    2.264296] hub 1-0:1.0: 6 ports detected
[    2.264589] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.264654] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.264693] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    2.264838] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    2.264890] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfff8000
[    2.322181] usb usb2: configuration #1 chosen from 1 choice
[    2.322248] hub 2-0:1.0: USB hub found
[    2.322272] hub 2-0:1.0: 2 ports detected
[    2.322529] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.322567] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    2.322721] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    2.322766] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfff9000
[    2.378156] usb usb3: configuration #1 chosen from 1 choice
[    2.378224] hub 3-0:1.0: USB hub found
[    2.378247] hub 3-0:1.0: 2 ports detected
[    2.378519] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    2.378557] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    2.378725] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[    2.378771] ohci_hcd 0000:00:03.2: irq 22, io mem 0xdfffa000
[    2.434164] usb usb4: configuration #1 chosen from 1 choice
[    2.434248] hub 4-0:1.0: USB hub found
[    2.434280] hub 4-0:1.0: 2 ports detected
[    2.434548] uhci_hcd: USB Universal Host Controller Interface driver
[    2.434743] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.435075] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.435093] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.435462] mice: PS/2 mouse device common for all mice
[    2.435859] rtc_cmos 00:03: RTC can wake from S4
[    2.435972] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.436049] rtc0: alarms up to one month, 114 bytes nvram
[    2.436219] device-mapper: uevent: version 1.0.3
[    2.436571] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    2.436767] device-mapper: multipath: version 1.0.5 loaded
[    2.436773] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.437032] EISA: Probing bus 0 at eisa.0
[    2.437077] EISA: Detected 0 cards.
[    2.437180] cpuidle: using governor ladder
[    2.437184] cpuidle: using governor menu
[    2.438006] TCP cubic registered
[    2.438221] NET: Registered protocol family 10
[    2.438957] lo: Disabled Privacy Extensions
[    2.439441] NET: Registered protocol family 17
[    2.439511] Bluetooth: L2CAP ver 2.11
[    2.439515] Bluetooth: L2CAP socket layer initialized
[    2.439518] Bluetooth: SCO (Voice Link) ver 0.6
[    2.439520] Bluetooth: SCO socket layer initialized
[    2.439627] Bluetooth: RFCOMM socket layer initialized
[    2.439649] Bluetooth: RFCOMM TTY layer initialized
[    2.439652] Bluetooth: RFCOMM ver 1.10
[    2.439778] Using IPI No-Shortcut mode
[    2.440065] registered taskstats version 1
[    2.440212]   Magic number: 1:266:726
[    2.440243] block loop6: hash matches
[    2.440340] rtc_cmos 00:03: setting system clock to 2009-07-23 08:42:09 UTC (1248338529)
[    2.440345] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.440348] EDD information not available.
[    2.441225] Freeing unused kernel memory: 532k freed
[    2.441371] Write protecting the kernel text: 4112k
[    2.441415] Write protecting the kernel read-only data: 1524k
[    2.472229] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.586012] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    2.749402] usb 1-4: configuration #1 chosen from 1 choice
[    2.993962] Floppy drive(s): fd0 is 1.44M
[    3.012710] FDC 0 is a post-1991 82077
[    3.340418] Initializing USB Mass Storage driver...
[    3.346401] usb-storage: probe of 1-4:1.0 failed with error -5
[    3.346557] usb-storage: probe of 1-4:1.1 failed with error -5
[    3.349308] usb-storage: probe of 1-4:1.2 failed with error -1
[    3.352174] usb-storage: probe of 1-4:1.3 failed with error -1
[    3.352228] usbcore: registered new interface driver usb-storage
[    3.352235] USB Mass Storage support registered.
[    3.400151] sis900.c: v1.08.10 Apr. 2 2006
[    3.400236] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    3.401559] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    3.415266] 0000:00:04.0: Using transceiver found at address 1 as default
[    3.423158] eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 19, 00:0b:6a:2b:23:79
[    4.176881] PM: Starting manual resume from disk
[    4.176890] PM: Resume from partition 8:5
[    4.176892] PM: Checking hibernation image.
[    4.177207] PM: Resume from disk failed.
[    4.214415] kjournald starting.  Commit interval 5 seconds
[    4.214446] EXT3-fs: mounted filesystem with ordered data mode.
[    9.921044] udev: starting version 141
[   10.118988] Linux agpgart interface v0.103
[   10.129889] agpgart-sis 0000:00:00.0: SiS chipset [1039/0651]
[   10.135265] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[   10.217209] parport_pc 00:0a: reported by Plug and Play ACPI
[   10.217340] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   10.288397] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.339911] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[   10.339922] ACPI: I/O resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f]
[   10.339924] ACPI: Device needs an ACPI driver
[   10.809496] end_request: I/O error, dev sr1, sector 0
[   10.809509] Buffer I/O error on device sr1, logical block 0
[   10.809517] Buffer I/O error on device sr1, logical block 1
[   10.809528] Buffer I/O error on device sr1, logical block 2
[   10.809532] Buffer I/O error on device sr1, logical block 3
[   10.809536] Buffer I/O error on device sr1, logical block 4
[   10.809540] Buffer I/O error on device sr1, logical block 5
[   10.809544] Buffer I/O error on device sr1, logical block 6
[   10.809548] Buffer I/O error on device sr1, logical block 7
[   10.819154] usbcore: registered new interface driver usbserial
[   10.819315] USB Serial support registered for generic
[   10.819516] usbcore: registered new interface driver usbserial_generic
[   10.819522] usbserial: USB Serial Driver core
[   10.821292] end_request: I/O error, dev sr1, sector 0
[   10.821304] Buffer I/O error on device sr1, logical block 0
[   10.826790] end_request: I/O error, dev sr1, sector 4
[   10.826802] Buffer I/O error on device sr1, logical block 1
[   10.842693] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.916932] USB Serial support registered for GSM modem (1-port)
[   10.917097] option 1-4:1.0: GSM modem (1-port) converter detected
[   10.917584] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0
[   10.917624] option 1-4:1.1: GSM modem (1-port) converter detected
[   10.918041] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1
[   10.918112] usbcore: registered new interface driver option
[   10.918118] option: v0.7.2:USB Driver for GSM modems
[   10.954786] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   11.471330] psmouse serio1: ID: 10 00 64<6>Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   11.828108] intel8x0_measure_ac97_clock: measured 54571 usecs
[   11.828114] intel8x0: clocking to 48000
[   11.846494] ppdev: user-space parallel port driver
[   12.057972] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   12.759730] lp0: using parport0 (interrupt-driven).
[   12.993964] Adding 634528k swap on /dev/sda5.  Priority:-1 extents:1 across:634528k
[   13.614359] EXT3 FS on sda1, internal journal
[   15.959712] __ratelimit: 15 callbacks suppressed
[   15.959718] type=1505 audit(1248338543.015:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1965
[   15.960340] type=1505 audit(1248338543.019:: operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1965
[   16.013712] type=1505 audit(1248338543.071:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1969
[   20.031550] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.031555] Bluetooth: BNEP filters: protocol multicast
[   20.060716] Bridge firewalling registered
[   25.943933] eth0: Media Link Off
[   25.944272] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   43.084514] PPP BSD Compression module registered
[   43.298007] PPP Deflate Compression module registered
mikko@mikko-desktop:~$

[AlbertRetro]

Jossei se osaa lukea ollenkaan...

johon on tallennettu tiedostoja Windows xp:llä

Elikkä niitä ntfs-hiluja puuttuisi...
Ja lsusb:ssähän tuo ei näyttäydy. Se ejectointi wintoussilla

Koodia: [Valitse]

sudo update-usbids
ja uusi lsusb ennen muita äksöneitä.

Ystävällisin terveisin Alpertti

[oobetimer]

sudo fdisc -l komentoon tulee vastaus "command not found"

Ehkä komento sudo fdisk -l saattaa paljastaa jotain

[AlbertRetro]

sudo fdisc -l komentoon tulee vastaus "command not found"

Ehkä komento sudo fdisk -l saattaa paljastaa jotain

Mitenkäs tälle nuorisolle parhaiten korostais tätä Linuxin oikeinkirjoituksen tärkeyttä?

Nyt tarvitsisin ohjeita miten saan levyn toimimaan ubuntulla vai pitääkö siirtyä takaisin xp:lle. Ohjeiden pitäisi olla askel-askeleelta, että tälläinen amatööri osaa toimia.... Kiitos.

Niin ei tars niin paljoa ihmetellä kaikkia eriskummallisuuksia.

Ystävällisin terveisin Alpertti

[kalarm]

Koodia: [Valitse]

Mitenkäs tälle nuorisolle parhaiten korostais tätä Linuxin oikeinkirjoituksen tärkeyttä?
Ehkä pitäisi enemmän painottaa, kopioi ja liitä niin koodi tulee oikein?

[hessan]

näinpä juuri...  mun moka..


sudo fdisk -l:


Levy /dev/sda: 81.9 Gt, 81964302336 tavua
255 päätä, 63 sektoria/ura, 9964 sylinteriä
Yksiköt = 16065 * 512 = 8225280 -tavuiset sylinterit
Levyn tunniste: 0x15961595

    Laite Käynn     Alku          Loppu    Lohkot   Id  Järjestelmä
/dev/sda1   *           1        9885    79401231   83  Linux
/dev/sda2            9886        9964      634567+   5  Laajennettu
/dev/sda5            9886        9964      634536   82  Linux-sivutus / Solaris

Levy /dev/sdb: 123.5 Gt, 123522416640 tavua
255 päätä, 63 sektoria/ura, 15017 sylinteriä
Yksiköt = 16065 * 512 = 8225280 -tavuiset sylinterit
Levyn tunniste: 0xaacb315f

    Laite Käynn     Alku          Loppu    Lohkot   Id  Järjestelmä
/dev/sdb1               1       15017   120624021    7  HPFS/NTFS
mikko@mikko-desktop:~$

[Tha-Fox]

Minkäs kokoinen tuo levy on? Tuon perusteella tuolla olisi sdb-levynä about 120-gigainen lätty, jossa on ntfs-osio.

[hessan]

Käytin levyä taas xp-koneessa, toimi kuin unelma. Irrotin levyn oikeaoppisesti ja sammutin koneen ennen johdon irrottamista ja tulos yhtä tyhjän kanssa... ei pelaa vieläkään!

Uusin myös lsusb:n eikä auta.

Mitä nyt pitäisi tehdä?

[kalarm]

Kokeile tunnistaako GParted Levyossioiden muokkain.

[hessan]

ööö... miten se tehdään? En tosiaankaan hallitse tietokoneita, tarvitsen yksiselitteiset ohjeet.... Kiitos.

[kalarm]

ööö... miten se tehdään? En tosiaankaan hallitse tietokoneita, tarvitsen yksiselitteiset ohjeet.... Kiitos.

Ubuntussa  järjestelmä --> Ylläpito --> Levyosioiden muokkain --> Salasana --> Oikeassa yläkulmassa avaat valikon. Siellä pitäisi buffalon näkyä jos se on päällä. Voi olla että tunnistat vain levyn koosta? Se on pienempi kuin ilmoitettu. Esimerkiksi omani Buffalo on 320 Gb, näkyy kokona 298 Gb. Älä kuitenkaan tee mitään.
Toinen mahdollisuus kenties on jäänyt sinulta huomaamatta ja yksinkertaisempi. Jos levykkeen kuvaa ei ole työpöydällä, mene Sijainnit -->irrotettavat taltiot --> Siellä pitäisi Buffalo näkyä Tai sen osiot. Minulla esimerkiksi on osioitu kolmeen osioon. Xp. Ubuntu ja media. Toivottavasti tästä on apua. Anteeksi jos edellinen  kirjoitus oli vajavainen. kalarm.

Lisätään: Asennuslevyltä myös löytyy ohjelmista GParted.

[hessan]

ööö... miten se tehdään? En tosiaankaan hallitse tietokoneita, tarvitsen yksiselitteiset ohjeet.... Kiitos.

Ubuntussa  järjestelmä --> Ylläpito --> Levyosioiden muokkain --> Salasana --> Oikeassa yläkulmassa avaat valikon. Siellä pitäisi buffalon näkyä jos se on päällä. Voi olla että tunnistat vain levyn koosta? Se on pienempi kuin ilmoitettu. Esimerkiksi omani Buffalo on 320 Gb, näkyy kokona 298 Gb. Älä kuitenkaan tee mitään.
Toinen mahdollisuus kenties on jäänyt sinulta huomaamatta ja yksinkertaisempi. Jos levykkeen kuvaa ei ole työpöydällä, mene Sijainnit -->irrotettavat taltiot --> Siellä pitäisi Buffalo näkyä Tai sen osiot. Minulla esimerkiksi on osioitu kolmeen osioon. Xp. Ubuntu ja media. Toivottavasti tästä on apua. Anteeksi jos edellinen  kirjoitus oli vajavainen. kalarm.

Lisätään: Asennuslevyltä myös löytyy ohjelmista GParted.

Näitä ei löydy minun koneelta.(levyosioiden muokkain / irrotettavat taltiot) Miten saan sellaiset toiminnot näkyviin sijaintiin ja ylläpitoon?

[Eetu_]

Levyosioiden muokkainta ei siis ole asennettu. Se asennetaan kirjoittamalla päätteeseen

Koodia: [Valitse]

sudo apt-get install gparted

[hessan]

Ei näy ulkoista asemaa levyosioiden muokkaimessa, enkä saanut vieläkään näkyviin sijainnista irrotettavat taltiot-osiota.

Mitäs nyt? Olisi hyvät neuvot tarpeen...