Terve kaikille
Tuli ostettua Anysee e30+, laite tunnistuu ja ajuri ladataan, mutta vlc:llä ei onnistu kanavan virittäminen tulee vain seuraavanlainen ilmoitus:
qt4 debug: Initialization of Capture device panel
qt4 warning: Input option: dvb-adapter=0
qt4 warning: Input option: dvb-srate=0
main debug: adding item `dvb://frequency=322000000' ( dvb://frequency=322000000 )
qt4 debug: Adding a new MRL to recent ones: dvb://frequency=322000000
main debug: rebuilding array of current - root Soittolista
main debug: rebuild done - 1 items, index -1
main debug: processing request item dvb://frequency=322000000 node null skip 0
main debug: resyncing on dvb://frequency=322000000
main debug: dvb://frequency=322000000 is at 0
main debug: starting new item
main debug: creating new input thread
main debug: Creating an input for 'dvb://frequency=322000000'
main debug: thread started
main debug: using timeshift granularity of 50 MBytes
main debug: using timeshift path '/tmp'
main debug: thread (input) created at priority 10 (input/input.c:230)
main debug: `dvb://frequency=322000000' gives access `dvb' demux `' path `frequency=322000000'
main debug: creating demux: access='dvb' demux='' path='frequency=322000000'
main debug: looking for access_demux module: 0 candidates
main debug: no access_demux module matched "dvb"
main debug: TIMER module_need() : 0,185 ms - Total 0,185 ms / 1 intvls (Avg 0,185 ms)
main debug: creating access 'dvb' path='frequency=322000000'
main debug: looking for access module: 1 candidate
dvb debug: Opening device /dev/dvb/adapter0/frontend0
qt4 debug: IM: Setting an input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
dvb debug: Frontend Info:
dvb debug: name = Philips TDA10023 DVB-C
dvb debug: type = QAM (DVB-C)
dvb debug: frequency_min = 47000000 (kHz)
dvb debug: frequency_max = 858000000 (kHz)
dvb debug: frequency_stepsize = 62500
dvb debug: frequency_tolerance = 0
dvb debug: symbol_rate_min = 458333 (kHz)
dvb debug: symbol_rate_max = 7333333 (kHz)
dvb debug: symbol_rate_tolerance (ppm) = 0
dvb debug: notifier_delay (ms) = 0
dvb debug: Frontend Info capability list:
dvb debug: inversion auto
dvb debug: forward error correction auto
dvb debug: card can do QPSK
dvb debug: card can do QAM 16
dvb debug: card can do QAM 32
dvb debug: card can do QAM 64
dvb debug: card can do QAM 128
dvb debug: card can do QAM 256
dvb debug: End of capability list
dvb debug: trying to tune the frontend...
dvb debug: using inversion=2
dvb debug: using fec=9
dvb error: DVB-C: setting frontend failed (-1): Virheellinen argumentti
dvb error: DVB-C: tuning failed
main warning: no access module matching "dvb" could be loaded
main debug: TIMER module_need() : 677,244 ms - Total 677,244 ms / 1 intvls (Avg 677,244 ms)
main error: open of `dvb://frequency=322000000' failed: (null)
main debug: thread ended
main debug: dead input
main debug: changing item without a request (current 0/1)
main debug: nothing to play
qt4 debug: IM: Deleting the input
qt4 debug: Updating the geometry
qt4 debug: Updating the geometry
main debug: TIMER input launching for 'dvb://frequency=322000000' : 804,795 ms - Total 804,795 ms / 1 intvls (Avg 804,795 ms)
Windowsin puolella vlc:llä toimii sama taajuus.
dmesg sanoo, että:
[ 7358.750098] usb 1-2: new high speed USB device using ehci_hcd and address 7
[ 7359.892604] usb 1-2: device not accepting address 7, error -71
[ 7360.035525] usb 1-2: new high speed USB device using ehci_hcd and address 8
[ 7361.407915] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[ 7361.407928] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
[ 7361.407939] usb 1-2: config 1 interface 0 altsetting 1 bulk endpoint 0x1 has invalid maxpacket 64
[ 7361.407947] usb 1-2: config 1 interface 0 altsetting 1 bulk endpoint 0x81 has invalid maxpacket 64
[ 7361.410871] usb 1-2: configuration #1 chosen from 1 choice
[ 7361.412221] dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
[ 7361.412301] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 7361.414977] DVB: registering new adapter (Anysee DVB USB2.0)
[ 7361.420926] anysee: firmware version:0.1.2 hardware id:15
[ 7361.438468] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
Onko tälle versiolle tukea ?
