Etsiskelin tähän apuja foorumeilta, mutta ei suoranaisesti löytynyt vastausta...
Eli, resoluutiolla 1280x768@60Hz kaikki toimii hienosti, mutta...
Näyttönä on Samsung SyncMaster 940MW, jonka optimireso on 1440x900@60Hz. Konffasin xorg.conf:n, ja lisäsin sinne tuon resoluution. Kun sen ottaa käyttöön, niin kuva karkaa sekä näytön ylä että alaosasta näytön ulkopuolelle. Samalla myös fontit muuttuvat aikalailla suttuisiksi.
Näyttöstä en voi säätää kuvaa mahtumaan ruutuun. Monitorissa on vain Auto Adjust ja se säätää kuvan johonkin kohtaan työpöytää, usein niin, että n. sentti työpöydästä karkaa näkymättömiin ylä-/alalaidoilta ja osa työkalupalkkia sen mukana.
Näytönohjain on Radeon 9600 PRO.
Ohessa xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Driver "ati"
BusID "PCI:2:0:0"
EndSection
Section "Monitor"
Identifier "Samsung Syncmaster 940MW"
Option "DPMS"
HorizSync 30-61
VertRefresh 56-75
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Monitor "Samsung Syncmaster 940MW"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
ja dcprobe, jos siitä on mitään iloa. Siitä puuttuu kuitenkin tuo 1440x900...
vbe: VESA 2.0 detected.
oem: ATI RADEON 9600 PRO
memory: 16384kb
mode: 800x600x16
mode: 1024x768x16
mode: 320x200x32k
mode: 320x200x64k
mode: 320x200x16m
mode: 1600x1200x256
mode: 640x400x256
mode: 640x480x256
mode: 640x480x32k
mode: 640x480x64k
mode: 640x480x16m
mode: 1600x1200x32k
mode: 800x600x256
mode: 800x600x32k
mode: 800x600x64k
mode: 800x600x16m
mode: 1600x1200x64k
mode: 1024x768x256
mode: 1024x768x32k
mode: 1024x768x64k
mode: 1024x768x16m
mode: 1280x1024x256
mode: 1280x1024x32k
mode: 1280x1024x64k
mode: 1280x1024x16m
mode: 132x25 (text)
mode: 132x43 (text)
edid: ¢
edidfail
Ja Ubuntu on versiota 6.06.