Tilasin tuollaisen tikun, mutta ei tahdo toimia. Win7 koneessa toimii ok.
Mikähän tässä mättää :
dmesg
[ 1216.465542] usb 1-10: new high-speed USB device number 3 using xhci_hcd
[ 1216.642168] usb 1-10: New USB device found, idVendor=15f4, idProduct=0131
[ 1216.642172] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1216.642175] usb 1-10: Product: dvbt2
[ 1216.642177] usb 1-10: Manufacturer: astrometadvbt2
[ 1216.726994] usb 1-10: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
[ 1216.870956] usb 1-10: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 1216.870971] dvbdev: DVB: registering new adapter (Astrometa DVB-T2)
[ 1216.893484] i2c i2c-11: Added multiplexed i2c bus 12
[ 1216.893487] rtl2832 11-0010: Realtek RTL2832 successfully attached
[ 1216.893505] usb 1-10: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 1216.903039] r820t 12-003a: creating new instance
[ 1216.916752] r820t 12-003a: Rafael Micro r820t successfully identified
[ 1216.930407] media: Linux media interface: v0.10
[ 1216.942498] Linux video capture interface: v2.00
[ 1216.963967] rtl2832_sdr rtl2832_sdr.0.auto: Registered as swradio0
[ 1216.963970] rtl2832_sdr rtl2832_sdr.0.auto: Realtek RTL2832 SDR attached
[ 1216.963973] rtl2832_sdr rtl2832_sdr.0.auto: SDR API is still slightly experimental and functionality changes may follow
[ 1216.987133] lirc_dev: IR Remote Control driver registered, major 237
[ 1216.993970] IR LIRC bridge handler initialized
[ 1216.994260] Registered IR keymap rc-empty
[ 1216.994314] rc rc0: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/rc/rc0
[ 1216.994373] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-10/rc/rc0/input16
[ 1216.994560] lirc lirc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 1216.994567] usb 1-10: dvb_usb_v2: schedule remote query interval to 200 msecs
[ 1217.014887] usb 1-10: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
[ 1217.014972] usbcore: registered new interface driver dvb_usb_rtl28xxu
kanavahaku näyttää tältä :
dvbv5-scan -O ZAP Lataukset/fi-Turku
Scanning frequency #1 538000000
(0x00) Signal= 0,00% C/N= 0,00% postBER= 0
Scanning frequency #2 594000000
ERROR command STREAM_ID (42) not found during store
(0x00) Signal= 0,00% C/N= 0,00% postBER= 0
Scanning frequency #3 682000000
(0x00) Signal= 0,00% C/N= 0,00% postBER= 0
Scanning frequency #4 634000000
(0x00) Signal= 0,00% C/N= 0,00% postBER= 0
Scanning frequency #5 570000000
ERROR command STREAM_ID (42) not found during store
(0x00) Signal= 0,00% C/N= 0,00% postBER= 0
ja dmesg näyttää sitten tällaista :
1309.511794] r820t 12-003a: r820t_write: i2c wr failed=-71 reg=0e len=1: 75
[ 1309.555755] r820t 12-003a: r820t_write: i2c wr failed=-71 reg=1d len=1: 86
[ 1310.967795] r820t 12-003a: r820t_write: i2c wr failed=-71 reg=0f len=1: 68
[ 1312.090849] r820t 12-003a: r820t_read: i2c rd failed=-71 reg=00 len=4: 69 81 ab ff
[ 1314.181347] r820t 12-003a: r820t_read: i2c rd failed=-110 reg=00 len=4: 69 81 2b 3f
[ 1315.205319] usb 1-10: dvb_usb_v2: rc.query() failed=-110
[ 1317.253375] r820t 12-003a: r820t_read: i2c rd failed=-110 reg=00 len=4: 69 81 2b 3f
[ 1319.301345] r820t 12-003a: r820t_read: i2c rd failed=-110 reg=00 len=4: 69 81 2b 3f
[ 1321.349338] r820t 12-003a: r820t_read: i2c rd failed=-110 reg=00 len=4: 69 81 2b 3f
[ 1323.397317] r820t 12-003a: r820t_read: i2c rd failed=-110 reg=00 len=4: 69 81 2b 3f
...
[ 1341.299805] r820t 12-003a: r820t_read: i2c rd failed=-19 reg=00 len=4: f0 81 2b 3f
[ 1341.400294] r820t 12-003a: destroying instance
[ 1341.400591] dvb_usb_v2: 'Astrometa DVB-T2:1-10' successfully deinitialized and disconnected
[ 1341.672812] usb 1-10: new high-speed USB device number 4 using xhci_hcd
[ 1343.140747] usb 1-10: device descriptor read/64, error -32
[ 1349.704721] usb 1-10: device descriptor read/64, error -71
[ 1349.940714] usb 1-10: new high-speed USB device number 5 using xhci_hcd
[ 1353.900765] usb 1-10: device descriptor read/64, error -71
[ 1356.749000] usb 1-10: device descriptor read/64, error -71
[ 1356.856990] usb usb1-port10: attempt power cycle
[ 1357.716612] usb 1-10: new high-speed USB device number 6 using xhci_hcd
[ 1362.516703] usb 1-10: Device not responding to setup address.
[ 1367.489839] usb 1-10: Device not responding to setup address.
[ 1367.696584] usb 1-10: device not accepting address 6, error -71
[ 1367.824586] usb 1-10: new high-speed USB device number 7 using xhci_hcd
[ 1369.294219] usb 1-10: Device not responding to setup address.
[ 1374.301063] usb 1-10: Device not responding to setup address.
[ 1374.508554] usb 1-10: device not accepting address 7, error -71
[ 1374.508603] usb usb1-port10: unable to enumerate USB device
Ideoita ?