Kirjoittaja Aihe: (Ratkaistu)Ubuntu 16.04.1 Kone kaatui ja nyt jumissa mustaan ruutuun.  (Luettu 5135 kertaa)

MarkoN

  • Käyttäjä
  • Viestejä: 562
    • Profiili
Moro.
Eilen illalla katsoin selaimella flash ohjelmaa ja käynnistin Steamin samalla jolloin kone jokähti eikä ottanut mitään käskyä vastaan odottelin yli 5min jotta olisin saanut koneen sammutettua.

Power bootti ja kone käynnistyi työpöydälle mutta jumittui totaalisesti heti. Boottasin uudelleen, jäi Ubuntun punertavaan ruutuun. Boottasin uudelleen ja jäi mustaan ruutuun.

Tämän jälkeen koneen käynnistyksessä tulee recovery ja pari muuta vaihtoehtoa. Recoveryllä käynnistäessä tulee tekstiä joistakin ongelmista ja käynnistys keskeytyy.

Pääsin lopulta Ubuntu tikulla kirjoittamaan tätä... Ei jaksais taas alkaa asentaa kaikkea uudelleen. Työpöytäkin pitäisi kopioida talteen kun sinne taisi dokumentteja.

Pitäisi varmaan aloittaa ihan oma ketju näille mun ongelmille "MarkoN:än omat ongelmat" tai "Kuinka taas onnistuin, MarkoN"  :D :D :D


Niin kuinkas pääsis ekana kopioimaan ne dokumentit sieltä kovolta talteen??
« Viimeksi muokattu: 16.01.17 - klo:13.36 kirjoittanut MarkoN »
Windows 10 PRO
Asus P8Z77-V, i7-3770K 3,5GHz(->4,2GHz),
16Gt 2400MHz DDR3, Asus GeForce GTX 1070
Acer Aspire One, ATOM N270 1,6GHz, 1,5Gt DDR2

Ubuntu 20.04.6 LTS
Asus P8P67, i5-2500K 3,3GHz(->4,6GHz),
8Gt 1600MHz DDR3, Gigabyte GeForce GTX970 G1 Gaming

MarkoN

  • Käyttäjä
  • Viestejä: 562
    • Profiili
Vs: Ubuntu 16.04.1 Kone kaatui ja nyt jumissa mustaan ruutuun.
« Vastaus #1 : 01.12.16 - klo:10.22 »
Eipä tarvinnutkaan...

Ajattelin et käynnistämpä koneen siinä recoverymodessa ja otan kuvan ruudusta.

Kone käynnistyikin työpöydälle ilman mitään erroreja ja toimii siis toistaiseksi.



Modet voi poistaa tän threadin jos mahdollista.
Windows 10 PRO
Asus P8Z77-V, i7-3770K 3,5GHz(->4,2GHz),
16Gt 2400MHz DDR3, Asus GeForce GTX 1070
Acer Aspire One, ATOM N270 1,6GHz, 1,5Gt DDR2

Ubuntu 20.04.6 LTS
Asus P8P67, i5-2500K 3,3GHz(->4,6GHz),
8Gt 1600MHz DDR3, Gigabyte GeForce GTX970 G1 Gaming

nm

  • Käyttäjä
  • Viestejä: 16427
    • Profiili
Vs: Ubuntu 16.04.1 Kone kaatui ja nyt jumissa mustaan ruutuun.
« Vastaus #2 : 01.12.16 - klo:12.28 »
Kone käynnistyikin työpöydälle ilman mitään erroreja ja toimii siis toistaiseksi.

Varmuuskopiot laitoit varmaan jo tekeytymään?

Edellisistä lokitiedostoista (/var/log/kern.log.1, /var/log/Xorg.1.log) voisi kaivella vian syytä. Voi johtua mm. kovalevystä, muisteista tai näytönohjaimesta. Tarkista Levyt-ohjelmalla kovalevyn SMART-status.
« Viimeksi muokattu: 01.12.16 - klo:12.32 kirjoittanut nm »

MarkoN

  • Käyttäjä
  • Viestejä: 562
    • Profiili
Vs: Ubuntu 16.04.1 Kone kaatui ja nyt jumissa mustaan ruutuun.
« Vastaus #3 : 01.12.16 - klo:14.08 »
/var/log/kern.log toi kern.log.1 olis ollu vain 27.11 asti

Koodia: [Valitse]
Nov 30 16:51:09 Pelikone kernel: [23386.220953] usb 5-1: USB disconnect, device number 4
Nov 30 16:51:09 Pelikone kernel: [23386.332787] usb 6-1: USB disconnect, device number 3
Nov 30 16:51:21 Pelikone kernel: [23398.732541] usb 6-1: new SuperSpeed USB device number 4 using xhci_hcd
Nov 30 16:51:21 Pelikone kernel: [23398.757044] usb 6-1: New USB device found, idVendor=05e3, idProduct=0616
Nov 30 16:51:21 Pelikone kernel: [23398.757049] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 30 16:51:21 Pelikone kernel: [23398.757052] usb 6-1: Product: USB3.0 Hub
Nov 30 16:51:21 Pelikone kernel: [23398.757054] usb 6-1: Manufacturer: GenesysLogic
Nov 30 16:51:21 Pelikone kernel: [23398.758577] hub 6-1:1.0: USB hub found
Nov 30 16:51:21 Pelikone kernel: [23398.759287] hub 6-1:1.0: 4 ports detected
Nov 30 16:51:21 Pelikone kernel: [23398.860121] usb 5-1: new high-speed USB device number 5 using xhci_hcd
Nov 30 16:51:21 Pelikone kernel: [23399.002739] usb 5-1: New USB device found, idVendor=05e3, idProduct=0610
Nov 30 16:51:21 Pelikone kernel: [23399.002744] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 30 16:51:21 Pelikone kernel: [23399.002747] usb 5-1: Product: USB2.0 Hub
Nov 30 16:51:21 Pelikone kernel: [23399.002749] usb 5-1: Manufacturer: GenesysLogic
Nov 30 16:51:21 Pelikone kernel: [23399.004413] hub 5-1:1.0: USB hub found
Nov 30 16:51:21 Pelikone kernel: [23399.006234] hub 5-1:1.0: 4 ports detected
Nov 30 16:52:41 Pelikone kernel: [23478.126161] usb 5-1: USB disconnect, device number 5
Nov 30 16:52:41 Pelikone kernel: [23478.296061] usb 6-1: USB disconnect, device number 4
Nov 30 18:39:45 Pelikone kernel: [29902.486527] usb 6-1: new SuperSpeed USB device number 5 using xhci_hcd
Nov 30 18:39:45 Pelikone kernel: [29902.511178] usb 6-1: New USB device found, idVendor=05e3, idProduct=0616
Nov 30 18:39:45 Pelikone kernel: [29902.511183] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 30 18:39:45 Pelikone kernel: [29902.511186] usb 6-1: Product: USB3.0 Hub
Nov 30 18:39:45 Pelikone kernel: [29902.511188] usb 6-1: Manufacturer: GenesysLogic
Nov 30 18:39:45 Pelikone kernel: [29902.512570] hub 6-1:1.0: USB hub found
Nov 30 18:39:45 Pelikone kernel: [29902.513140] hub 6-1:1.0: 4 ports detected
Nov 30 18:39:45 Pelikone kernel: [29902.613983] usb 5-1: new high-speed USB device number 6 using xhci_hcd
Nov 30 18:39:46 Pelikone kernel: [29902.837967] usb 5-1: new high-speed USB device number 7 using xhci_hcd
Nov 30 18:39:46 Pelikone kernel: [29902.980798] usb 5-1: New USB device found, idVendor=05e3, idProduct=0610
Nov 30 18:39:46 Pelikone kernel: [29902.980803] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 30 18:39:46 Pelikone kernel: [29902.980806] usb 5-1: Product: USB2.0 Hub
Nov 30 18:39:46 Pelikone kernel: [29902.980808] usb 5-1: Manufacturer: GenesysLogic
Nov 30 18:39:46 Pelikone kernel: [29902.982477] hub 5-1:1.0: USB hub found
Nov 30 18:39:46 Pelikone kernel: [29902.984293] hub 5-1:1.0: 4 ports detected
Nov 30 20:05:17 Pelikone NetworkManager[812]: <info>  [1480529117.6646]   address 192.168.1.35
Nov 30 20:05:17 Pelikone NetworkManager[812]: <info>  [1480529117.6648]   plen 24 (255.255.255.0)
Nov 30 20:05:17 Pelikone NetworkManager[812]: <info>  [1480529117.6649]   gateway 192.168.1.1
Nov 30 20:05:17 Pelikone NetworkManager[812]: <info>  [1480529117.6650]   server identifier 192.168.1.1
Nov 30 20:05:17 Pelikone NetworkManager[812]: <info>  [1480529117.6650]   lease time 86400
Nov 30 20:05:17 Pelikone NetworkManager[812]: <info>  [1480529117.6650]   nameserver '192.168.1.1'
Nov 30 20:05:17 Pelikone NetworkManager[812]: <info>  [1480529117.6650]   domain name 'Home'
Nov 30 20:05:17 Pelikone NetworkManager[812]: <info>  [1480529117.6657] dhcp4 (enp5s0): state changed bound -> bound

Tää oli siis siihen asti kunnes kaatu.

En minä ainakaan tuolta mitään ihmeellistä löytänyt.

Windows 10 PRO
Asus P8Z77-V, i7-3770K 3,5GHz(->4,2GHz),
16Gt 2400MHz DDR3, Asus GeForce GTX 1070
Acer Aspire One, ATOM N270 1,6GHz, 1,5Gt DDR2

Ubuntu 20.04.6 LTS
Asus P8P67, i5-2500K 3,3GHz(->4,6GHz),
8Gt 1600MHz DDR3, Gigabyte GeForce GTX970 G1 Gaming

MarkoN

  • Käyttäjä
  • Viestejä: 562
    • Profiili
Vs: Ubuntu 16.04.1 Kone kaatui ja nyt jumissa mustaan ruutuun.
« Vastaus #4 : 01.12.16 - klo:14.20 »
Eka käynnistys tänään.

Koodia: [Valitse]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Initializing cgroup subsys cpuset
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Initializing cgroup subsys cpu
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Initializing cgroup subsys cpuacct
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Linux version 4.4.0-47-generic (buildd@lcy01-03) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #68-Ubuntu SMP Wed Oct 26 19:39:52 UTC 2016 (Ubuntu 4.4.0-47.68-generic 4.4.24)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-47-generic root=UUID=bdfb9d58-fb63-4135-8317-a953789754ed ro quiet splash vt.handoff=7
Dec  1 00:05:55 Pelikone kernel: [    0.000000] KERNEL supported cpus:
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   Intel GenuineIntel
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   AMD AuthenticAMD
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   Centaur CentaurHauls
Dec  1 00:05:55 Pelikone kernel: [    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
Dec  1 00:05:55 Pelikone kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
Dec  1 00:05:55 Pelikone kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
Dec  1 00:05:55 Pelikone kernel: [    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
Dec  1 00:05:55 Pelikone kernel: [    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
Dec  1 00:05:55 Pelikone kernel: [    0.000000] x86/fpu: Using 'eager' FPU context switches.
Dec  1 00:05:55 Pelikone kernel: [    0.000000] e820: BIOS-provided physical RAM map:
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000deb89fff] usable
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000deb8a000-0x00000000dee02fff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000dee03000-0x00000000dee86fff] ACPI NVS
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000dee87000-0x00000000df139fff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000df13a000-0x00000000df38cfff] ACPI NVS
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000df38d000-0x00000000df399fff] ACPI data
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000df39a000-0x00000000df3b9fff] ACPI NVS
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000df3ba000-0x00000000df3befff] ACPI data
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000df3bf000-0x00000000df401fff] ACPI NVS
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000df402000-0x00000000df7fffff] usable
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
Dec  1 00:05:55 Pelikone kernel: [    0.000000] NX (Execute Disable) protection: active
Dec  1 00:05:55 Pelikone kernel: [    0.000000] SMBIOS 2.6 present.
Dec  1 00:05:55 Pelikone kernel: [    0.000000] DMI: System manufacturer System Product Name/P8P67, BIOS 3602 11/01/2012
Dec  1 00:05:55 Pelikone kernel: [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Dec  1 00:05:55 Pelikone kernel: [    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
Dec  1 00:05:55 Pelikone kernel: [    0.000000] MTRR default type: uncachable
Dec  1 00:05:55 Pelikone kernel: [    0.000000] MTRR fixed ranges enabled:
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   00000-9FFFF write-back
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   A0000-BFFFF uncachable
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   C0000-D3FFF write-protect
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   D4000-E7FFF uncachable
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   E8000-FFFFF write-protect
Dec  1 00:05:55 Pelikone kernel: [    0.000000] MTRR variable ranges enabled:
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   0 base 000000000 mask E00000000 write-back
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   1 base 200000000 mask FF0000000 write-back
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   2 base 210000000 mask FF8000000 write-back
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   3 base 218000000 mask FFC000000 write-back
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   4 base 21C000000 mask FFE000000 write-back
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   5 base 21E000000 mask FFF000000 write-back
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   7 disabled
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   8 disabled
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   9 disabled
Dec  1 00:05:55 Pelikone kernel: [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
Dec  1 00:05:55 Pelikone kernel: [    0.000000] original variable MTRRs
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 0, base: 0GB, range: 8GB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 1, base: 8GB, range: 256MB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 2, base: 8448MB, range: 128MB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 3, base: 8576MB, range: 64MB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 4, base: 8640MB, range: 32MB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 5, base: 8672MB, range: 16MB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 6, base: 3584MB, range: 512MB, type UC
Dec  1 00:05:55 Pelikone kernel: [    0.000000] total RAM covered: 8176M
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Found optimal setting for mtrr clean up
Dec  1 00:05:55 Pelikone kernel: [    0.000000]  gran_size: 64K chunk_size: 32M num_reg: 6  lose cover RAM: 0G
Dec  1 00:05:55 Pelikone kernel: [    0.000000] New variable MTRRs
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 0, base: 0GB, range: 2GB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 1, base: 2GB, range: 1GB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 2, base: 3GB, range: 512MB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 3, base: 4GB, range: 4GB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 4, base: 8GB, range: 512MB, type WB
Dec  1 00:05:55 Pelikone kernel: [    0.000000] reg 5, base: 8688MB, range: 16MB, type UC
Dec  1 00:05:55 Pelikone kernel: [    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
Dec  1 00:05:55 Pelikone kernel: [    0.000000] found SMP MP-table at [mem 0x000fce00-0x000fce0f] mapped at [ffff8800000fce00]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Scanning 1 areas for low memory corruption
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
Dec  1 00:05:55 Pelikone kernel: [    0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
Dec  1 00:05:55 Pelikone kernel: [    0.000000] RAMDISK: [mem 0x32b4e000-0x3559efff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: Early table checksum verification disabled
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: XSDT 0x00000000DF38D078 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: FACP 0x00000000DF398598 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: DSDT 0x00000000DF38D170 00B424 (v02 ALASKA A M I    00000015 INTL 20051117)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: FACS 0x00000000DF3B8F80 000040
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: APIC 0x00000000DF398690 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: MCFG 0x00000000DF398708 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: HPET 0x00000000DF398748 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: SSDT 0x00000000DF398780 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: SSDT 0x00000000DF398AF0 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: SSDT 0x00000000DF3994A0 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: BGRT 0x00000000DF399F90 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Dec  1 00:05:55 Pelikone kernel: [    0.000000] No NUMA configuration found
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] NODE_DATA(0) allocated [mem 0x21eff4000-0x21eff8fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Zone ranges:
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   Normal   [mem 0x0000000100000000-0x000000021effffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   Device   empty
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Movable zone start for each node
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Early memory node ranges
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009afff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   node   0: [mem 0x0000000000100000-0x00000000deb89fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   node   0: [mem 0x00000000df402000-0x00000000df7fffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   node   0: [mem 0x0000000100000000-0x000000021effffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] On node 0 totalpages: 2088738
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   DMA zone: 64 pages used for memmap
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   DMA zone: 21 pages reserved
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   DMA zone: 3994 pages, LIFO batch:0
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   DMA32 zone: 14207 pages used for memmap
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   DMA32 zone: 909192 pages, LIFO batch:31
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   Normal zone: 18368 pages used for memmap
Dec  1 00:05:55 Pelikone kernel: [    0.000000]   Normal zone: 1175552 pages, LIFO batch:31
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Dec  1 00:05:55 Pelikone kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: IRQ0 used by override.
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: IRQ9 used by override.
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Dec  1 00:05:55 Pelikone kernel: [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
Dec  1 00:05:55 Pelikone kernel: [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xdeb8a000-0xdee02fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xdee03000-0xdee86fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xdee87000-0xdf139fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xdf13a000-0xdf38cfff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xdf38d000-0xdf399fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xdf39a000-0xdf3b9fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xdf3ba000-0xdf3befff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xdf3bf000-0xdf401fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
Dec  1 00:05:55 Pelikone kernel: [    0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Dec  1 00:05:55 Pelikone kernel: [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Dec  1 00:05:55 Pelikone kernel: [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88021ec00000 s98008 r8192 d28968 u524288
Dec  1 00:05:55 Pelikone kernel: [    0.000000] pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
Dec  1 00:05:55 Pelikone kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2056078
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Policy zone: Normal
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-47-generic root=UUID=bdfb9d58-fb63-4135-8317-a953789754ed ro quiet splash vt.handoff=7
Dec  1 00:05:55 Pelikone kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Memory: 8095120K/8354952K available (8423K kernel code, 1285K rwdata, 3952K rodata, 1480K init, 1292K bss, 259832K reserved, 0K cma-reserved)
Dec  1 00:05:55 Pelikone kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Hierarchical RCU implementation.
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Build-time adjustment of leaf fanout to 64.
Dec  1 00:05:55 Pelikone kernel: [    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Dec  1 00:05:55 Pelikone kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
Dec  1 00:05:55 Pelikone kernel: [    0.000000] NR_IRQS:16640 nr_irqs:456 16
Dec  1 00:05:55 Pelikone kernel: [    0.000000] vt handoff: transparent VT on vt#7
Dec  1 00:05:55 Pelikone kernel: [    0.000000] Console: colour dummy device 80x25
Dec  1 00:05:55 Pelikone kernel: [    0.000000] console [tty0] enabled
Dec  1 00:05:55 Pelikone kernel: [    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Dec  1 00:05:55 Pelikone kernel: [    0.000000] hpet clockevent registered
Dec  1 00:05:55 Pelikone kernel: [    0.000000] tsc: Fast TSC calibration using PIT
Dec  1 00:05:55 Pelikone kernel: [    0.000000] tsc: Detected 3464.820 MHz processor

Windows 10 PRO
Asus P8Z77-V, i7-3770K 3,5GHz(->4,2GHz),
16Gt 2400MHz DDR3, Asus GeForce GTX 1070
Acer Aspire One, ATOM N270 1,6GHz, 1,5Gt DDR2

Ubuntu 20.04.6 LTS
Asus P8P67, i5-2500K 3,3GHz(->4,6GHz),
8Gt 1600MHz DDR3, Gigabyte GeForce GTX970 G1 Gaming

MarkoN

  • Käyttäjä
  • Viestejä: 562
    • Profiili
Vs: Ubuntu 16.04.1 Kone kaatui ja nyt jumissa mustaan ruutuun.
« Vastaus #5 : 01.12.16 - klo:14.21 »
En tiedä onko noista nyt mitään hyötyä kun joutuu paljon jättämään pois.

Jostain syystä biosin kello on 3h jäljessä... vaikka muutan sen käsin palaa se takaisin.
Windows 10 PRO
Asus P8Z77-V, i7-3770K 3,5GHz(->4,2GHz),
16Gt 2400MHz DDR3, Asus GeForce GTX 1070
Acer Aspire One, ATOM N270 1,6GHz, 1,5Gt DDR2

Ubuntu 20.04.6 LTS
Asus P8P67, i5-2500K 3,3GHz(->4,6GHz),
8Gt 1600MHz DDR3, Gigabyte GeForce GTX970 G1 Gaming

MarkoN

  • Käyttäjä
  • Viestejä: 562
    • Profiili
Vs: Ubuntu 16.04.1 Kone kaatui ja nyt jumissa mustaan ruutuun.
« Vastaus #6 : 01.12.16 - klo:14.24 »
 /var/log/Xorg.0.log)

Koodia: [Valitse]
[     3.789]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     3.789] X Protocol Version 11, Revision 0
[     3.789] Build Operating System: Linux 4.4.0-45-generic x86_64 Ubuntu
[     3.789] Current Operating System: Linux Pelikone 4.4.0-47-generic #68-Ubuntu SMP Wed Oct 26 19:39:52 UTC 2016 x86_64
[     3.789] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-47-generic root=UUID=bdfb9d58-fb63-4135-8317-a953789754ed ro quiet splash vt.handoff=7
[     3.789] Build Date: 02 November 2016  10:06:10PM
[     3.789] xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support)
[     3.789] Current version of pixman: 0.33.6
[     3.789] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[     3.789] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.789] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec  1 10:34:21 2016
[     3.789] (==) Using config file: "/etc/X11/xorg.conf"
[     3.789] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.790] (==) ServerLayout "Layout0"
[     3.790] (**) |-->Screen "Screen0" (0)
[     3.790] (**) |   |-->Monitor "Monitor0"
[     3.790] (**) |   |-->Device "Device0"
[     3.790] (**) |-->Input Device "Keyboard0"
[     3.790] (**) |-->Input Device "Mouse0"
[     3.790] (**) Option "Xinerama" "0"
[     3.790] (==) Automatically adding devices
[     3.790] (==) Automatically enabling devices
[     3.790] (==) Automatically adding GPU devices
[     3.790] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.790] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     3.790] Entry deleted from font path.
[     3.790] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     3.790] Entry deleted from font path.
[     3.790] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     3.790] Entry deleted from font path.
[     3.790] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     3.790] Entry deleted from font path.
[     3.790] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     3.790] Entry deleted from font path.
[     3.790] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[     3.790] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     3.790] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     3.790] (WW) Disabling Keyboard0
[     3.790] (WW) Disabling Mouse0
[     3.790] (II) Loader magic: 0x55b63de74dc0
[     3.790] (II) Module ABI versions:
[     3.791] X.Org ANSI C Emulation: 0.4
[     3.791] X.Org Video Driver: 20.0
[     3.791] X.Org XInput driver : 22.1
[     3.791] X.Org Server Extension : 9.0
[     3.791] (++) using VT number 7

[     3.791] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.791] (II) xfree86: Adding drm device (/dev/dri/card0)
[     3.792] (--) PCI:*(0:1:0:0) 10de:13c2:1458:367a rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     3.792] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     3.792] (II) "glx" will be loaded by default.
[     3.792] (II) LoadModule: "glx"
[     3.792] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     3.854] (II) Module glx: vendor="NVIDIA Corporation"
[     3.854] compiled for 4.0.2, module version = 1.0.0
[     3.854] Module class: X.Org Server Extension
[     3.854] (II) NVIDIA GLX Module  375.20  Tue Nov 15 16:38:52 PST 2016
[     3.854] (II) LoadModule: "nvidia"
[     3.854] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     3.857] (II) Module nvidia: vendor="NVIDIA Corporation"
[     3.857] compiled for 4.0.2, module version = 1.0.0
[     3.857] Module class: X.Org Video Driver
[     3.857] (II) NVIDIA dlloader X Driver  375.20  Tue Nov 15 16:15:23 PST 2016
[     3.857] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     3.859] (II) Loading sub module "fb"
[     3.859] (II) LoadModule: "fb"
[     3.859] (II) Loading /usr/lib/xorg/modules/libfb.so
[     3.860] (II) Module fb: vendor="X.Org Foundation"
[     3.860] compiled for 1.18.4, module version = 1.0.0
[     3.860] ABI class: X.Org ANSI C Emulation, version 0.4
[     3.860] (II) Loading sub module "wfb"
[     3.860] (II) LoadModule: "wfb"
[     3.860] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     3.860] (II) Module wfb: vendor="X.Org Foundation"
[     3.860] compiled for 1.18.4, module version = 1.0.0
[     3.860] ABI class: X.Org ANSI C Emulation, version 0.4
[     3.860] (II) Loading sub module "ramdac"
[     3.860] (II) LoadModule: "ramdac"
[     3.860] (II) Module "ramdac" already built-in
[     3.862] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     3.862] (==) NVIDIA(0): RGB weight 888
[     3.862] (==) NVIDIA(0): Default visual is TrueColor
[     3.862] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     3.862] (**) NVIDIA(0): Option "Stereo" "0"
[     3.862] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-2"
[     3.863] (**) NVIDIA(0): Option "SLI" "Off"
[     3.863] (**) NVIDIA(0): Option "MultiGPU" "Off"
[     3.863] (**) NVIDIA(0): Option "BaseMosaic" "off"
[     3.863] (**) NVIDIA(0): Stereo disabled by request
[     3.863] (**) NVIDIA(0): NVIDIA SLI disabled.
[     3.863] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[     3.863] (**) NVIDIA(0): Option "MetaModes" "1920x1080_144 +0+0"
[     3.863] (**) NVIDIA(0): Enabling 2D acceleration
[     8.595] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     8.595] (--) NVIDIA(0):     CRT-0
[     8.595] (--) NVIDIA(0):     DFP-0
[     8.595] (--) NVIDIA(0):     DFP-1
[     8.595] (--) NVIDIA(0):     DFP-2 (boot)
[     8.595] (--) NVIDIA(0):     DFP-3
[     8.595] (--) NVIDIA(0):     DFP-4
[     8.595] (--) NVIDIA(0):     DFP-5
[     8.595] (--) NVIDIA(0):     DFP-6
[     8.595] (--) NVIDIA(0):     DFP-7
[     8.596] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:1:0:0 (GPU-0)
[     8.596] (--) NVIDIA(0): Memory: 4194304 kBytes
[     8.596] (--) NVIDIA(0): VideoBIOS: 84.04.31.00.b8
[     8.596] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     8.598] (--) NVIDIA(GPU-0): CRT-0: disconnected
[     8.598] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[     8.598] (--) NVIDIA(GPU-0):
[     8.601] (--) NVIDIA(GPU-0): DFP-0: disconnected
[     8.601] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[     8.601] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     8.601] (--) NVIDIA(GPU-0):
[     8.601] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     8.601] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[     8.601] (--) NVIDIA(GPU-0): DFP-1: 330.0 MHz maximum pixel clock
[     8.601] (--) NVIDIA(GPU-0):
[     8.743] (--) NVIDIA(GPU-0): AOC G2460 (DFP-2): connected
[     8.743] (--) NVIDIA(GPU-0): AOC G2460 (DFP-2): Internal DisplayPort
[     8.743] (--) NVIDIA(GPU-0): AOC G2460 (DFP-2): 960.0 MHz maximum pixel clock
[     8.743] (--) NVIDIA(GPU-0): AOC G2460 (DFP-2): supports NVIDIA 3D Vision stereo.
[     8.743] (--) NVIDIA(GPU-0):
[     8.744] (--) NVIDIA(GPU-0): DFP-3: disconnected
[     8.744] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[     8.744] (--) NVIDIA(GPU-0): DFP-3: 330.0 MHz maximum pixel clock
[     8.744] (--) NVIDIA(GPU-0):
[     8.744] (--) NVIDIA(GPU-0): DFP-4: disconnected
[     8.744] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[     8.744] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[     8.744] (--) NVIDIA(GPU-0):
[     8.744] (--) NVIDIA(GPU-0): DFP-5: disconnected
[     8.744] (--) NVIDIA(GPU-0): DFP-5: Internal TMDS
[     8.744] (--) NVIDIA(GPU-0): DFP-5: 330.0 MHz maximum pixel clock
[     8.744] (--) NVIDIA(GPU-0):
[     8.744] (--) NVIDIA(GPU-0): DFP-6: disconnected
[     8.744] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[     8.744] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[     8.744] (--) NVIDIA(GPU-0):
[     8.744] (--) NVIDIA(GPU-0): DFP-7: disconnected
[     8.744] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[     8.744] (--) NVIDIA(GPU-0): DFP-7: 330.0 MHz maximum pixel clock
[     8.744] (--) NVIDIA(GPU-0):
[     8.745] (II) NVIDIA(0): Validated MetaModes:
[     8.745] (II) NVIDIA(0):     "1920x1080_144+0+0"
[     8.745] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[     8.748] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[     8.748] (--) NVIDIA(0):     option
[     8.748] (--) Depth 24 pixmap format is 32 bpp
[     8.749] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[     8.749] (II) NVIDIA:     access.
[     8.771] (II) NVIDIA(0): Setting mode "1920x1080_144+0+0"
[     8.841] (==) NVIDIA(0): Disabling shared memory pixmaps
[     8.841] (==) NVIDIA(0): Backing store enabled
[     8.841] (==) NVIDIA(0): Silken mouse enabled
[     8.842] (**) NVIDIA(0): DPMS enabled
[     8.842] (II) Loading sub module "dri2"
[     8.842] (II) LoadModule: "dri2"
[     8.842] (II) Module "dri2" already built-in
[     8.842] (II) NVIDIA(0): [DRI2] Setup complete
[     8.842] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     8.842] (--) RandR disabled
[     8.845] (II) SELinux: Disabled on system
[     8.845] (II) Initializing extension GLX
[     8.845] (II) Indirect GLX disabled.
[     8.876] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     8.876] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.876] (II) LoadModule: "evdev"
[     8.876] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     8.877] (II) Module evdev: vendor="X.Org Foundation"
[     8.877] compiled for 1.18.1, module version = 2.10.1
[     8.877] Module class: X.Org XInput Driver
[     8.877] ABI class: X.Org XInput driver, version 22.1
[     8.877] (II) Using input driver 'evdev' for 'Power Button'
[     8.877] (**) Power Button: always reports core events
[     8.877] (**) evdev: Power Button: Device: "/dev/input/event1"
[     8.877] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.877] (--) evdev: Power Button: Found keys
[     8.877] (II) evdev: Power Button: Configuring as keyboard
[     8.877] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     8.877] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.877] (**) Option "xkb_rules" "evdev"
[     8.877] (**) Option "xkb_model" "pc105"
[     8.877] (**) Option "xkb_layout" "fi"
[     8.886] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     8.886] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.886] (II) Using input driver 'evdev' for 'Power Button'
[     8.886] (**) Power Button: always reports core events
[     8.886] (**) evdev: Power Button: Device: "/dev/input/event0"
[     8.886] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.886] (--) evdev: Power Button: Found keys
[     8.886] (II) evdev: Power Button: Configuring as keyboard
[     8.886] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     8.886] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     8.886] (**) Option "xkb_rules" "evdev"
[     8.886] (**) Option "xkb_model" "pc105"
[     8.886] (**) Option "xkb_layout" "fi"
[     8.886] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[     8.886] (II) No input driver specified, ignoring this device.
[     8.886] (II) This device may have been added with another device file.
[     8.886] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[     8.886] (II) No input driver specified, ignoring this device.
[     8.886] (II) This device may have been added with another device file.
[     8.886] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[     8.886] (II) No input driver specified, ignoring this device.
[     8.886] (II) This device may have been added with another device file.
[     8.887] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[     8.887] (II) No input driver specified, ignoring this device.
[     8.887] (II) This device may have been added with another device file.
[     8.887] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[     8.887] (II) No input driver specified, ignoring this device.
[     8.887] (II) This device may have been added with another device file.
[     8.887] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event15)
[     8.887] (II) No input driver specified, ignoring this device.
[     8.887] (II) This device may have been added with another device file.
[     8.887] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event16)
[     8.887] (II) No input driver specified, ignoring this device.
[     8.887] (II) This device may have been added with another device file.
[     8.887] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event17)
[     8.887] (II) No input driver specified, ignoring this device.
[     8.887] (II) This device may have been added with another device file.
[     8.887] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event18)
[     8.887] (II) No input driver specified, ignoring this device.
[     8.887] (II) This device may have been added with another device file.
[     8.887] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event19)
[     8.887] (II) No input driver specified, ignoring this device.
[     8.887] (II) This device may have been added with another device file.
[     8.887] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event20)
[     8.887] (II) No input driver specified, ignoring this device.
[     8.887] (II) This device may have been added with another device file.
[     8.887] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event21)
[     8.888] (II) No input driver specified, ignoring this device.
[     8.888] (II) This device may have been added with another device file.
[     8.888] (II) config/udev: Adding input device Mad Catz Mad Catz F.L.Y.5 Stick (/dev/input/event6)
[     8.888] (II) No input driver specified, ignoring this device.
[     8.888] (II) This device may have been added with another device file.
[     8.888] (II) config/udev: Adding input device Mad Catz Mad Catz F.L.Y.5 Stick (/dev/input/js0)
[     8.888] (II) No input driver specified, ignoring this device.
[     8.888] (II) This device may have been added with another device file.
[     8.888] (II) config/udev: Adding input device Razer Razer BlackWidow (/dev/input/event2)
[     8.888] (**) Razer Razer BlackWidow: Applying InputClass "evdev keyboard catchall"
[     8.888] (II) Using input driver 'evdev' for 'Razer Razer BlackWidow'
[     8.888] (**) Razer Razer BlackWidow: always reports core events
[     8.888] (**) evdev: Razer Razer BlackWidow: Device: "/dev/input/event2"
[     8.888] (--) evdev: Razer Razer BlackWidow: Vendor 0x1532 Product 0x11b
[     8.888] (--) evdev: Razer Razer BlackWidow: Found keys
[     8.888] (II) evdev: Razer Razer BlackWidow: Configuring as keyboard
[     8.888] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1532:011B.0001/input/input5/event2"
[     8.888] (II) XINPUT: Adding extended input device "Razer Razer BlackWidow" (type: KEYBOARD, id 8)
[     8.888] (**) Option "xkb_rules" "evdev"
[     8.888] (**) Option "xkb_model" "pc105"
[     8.888] (**) Option "xkb_layout" "fi"

Windows 10 PRO
Asus P8Z77-V, i7-3770K 3,5GHz(->4,2GHz),
16Gt 2400MHz DDR3, Asus GeForce GTX 1070
Acer Aspire One, ATOM N270 1,6GHz, 1,5Gt DDR2

Ubuntu 20.04.6 LTS
Asus P8P67, i5-2500K 3,3GHz(->4,6GHz),
8Gt 1600MHz DDR3, Gigabyte GeForce GTX970 G1 Gaming

nm

  • Käyttäjä
  • Viestejä: 16427
    • Profiili
Vs: Ubuntu 16.04.1 Kone kaatui ja nyt jumissa mustaan ruutuun.
« Vastaus #7 : 01.12.16 - klo:14.45 »
En tiedä onko noista nyt mitään hyötyä kun joutuu paljon jättämään pois.

Lokitiedostot voi laittaa kokonaisuudessaan viestin liitteeksi (Liitteet ja muut asetukset tuossa kirjoituskentän alapuolella).

Noiden onnistuneiden käynnistysten lokeissa ei näy mitään epänormaalia. Katsoitko myös X.org:n aiemmat lokit läpi? Jos ongelma esiintyy uudestaan, voit käynnistää koneen live-cd:llä, liittää juuriosion ja tutkia lokeja sieltä.

Jostain syystä biosin kello on 3h jäljessä... vaikka muutan sen käsin palaa se takaisin.

Linux-jakelut pitävät biosin kellon oletuksena UTC-ajassa, mikä on yleisesti järkevin käytäntö etenkin, jos samassa tietokoneessa on useita käyttöjärjestelmiä. Windows taas pitää bios-kellon paikallisessa ajassa, mikä aiheuttaa Linux-dualbootin kanssa ongelmia silloin, kun kone ei ole kytketty nettiin tai jos NTP-palvelimiin ei saada yhteyttä. Tällöin jomman kumman käyttöjärjestelmän asetuksia pitää muuttaa, jotta ne ovat samaa mieltä kellonajasta.

Talviajassa biosin kellon pitäisi olla 2 h jäljessä.
« Viimeksi muokattu: 01.12.16 - klo:14.47 kirjoittanut nm »

MarkoN

  • Käyttäjä
  • Viestejä: 562
    • Profiili
Vs: Ubuntu 16.04.1 Kone kaatui ja nyt jumissa mustaan ruutuun.
« Vastaus #8 : 16.01.17 - klo:13.36 »
Tämä johtui todennäköisesti turhan korkeasta ylikellotuksen kertoimesta. Muutettu asetuksia ja toiminut kaatumisesta asti moitteetta.
Windows 10 PRO
Asus P8Z77-V, i7-3770K 3,5GHz(->4,2GHz),
16Gt 2400MHz DDR3, Asus GeForce GTX 1070
Acer Aspire One, ATOM N270 1,6GHz, 1,5Gt DDR2

Ubuntu 20.04.6 LTS
Asus P8P67, i5-2500K 3,3GHz(->4,6GHz),
8Gt 1600MHz DDR3, Gigabyte GeForce GTX970 G1 Gaming