Kirjoittaja Aihe: GeForce 8800 GTX ja tuplanäytöllinen probleema [RATKAISTU]  (Luettu 13948 kertaa)

Postimies

  • Käyttäjä
  • Viestejä: 2619
    • Profiili
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #20 : 13.01.16 - klo:15.05 »
Pitää korjata xorg.conf. Lue vaikka Arch Linux tai Gentoon wikiä. InputDevice taitaa olla InputClass nykyään. Itse käytän hiirelle ja näppäimistölle evdev ajuria.

X:n konffaus on muuttunut vuosien mittaan. Riippuu hieman mikä X ja WM käytössä. TwinView antaa sinulle yhden ison työpöydän. Tarvitset kaksi monitor sektiota. Nyt vain yksi

Gentoon ja Arch Linuxin wikeissä hyviä esimerkkejä. xorg.conf tai xorg.conf.d/* kirjoittelu on työläs prosessi. DISPLAY=:0.1 käynnistää ohjelman toiselle näytölle. Esim. DISPLAY=:0.1 vlc. Itselläni ei ole mitään käsitystä miten Windowsissa saa ohjelman käynnistymään tietylle näytölle. X:ssä se onnistuu vaikka virtuaaliselle näytölle. Windowsissa minua häiritsi se, että ohjelmat käynnistyi minne sattui.

Aloita opiskelu vaikka https://wiki.archlinux.org/index.php/NVIDIA#Multiple_monitors

nano turvallinen editori myös. Ennen editointia kannattaa ottaa varmuuskopio. Jos jotain pahasti pielessä X ei enää käynnisty. sudo nano -w xorg.conf. Optio w estää automaattisen rivityksen, mikä voi aiheuttaa harmia. Varmuus on aina parasta.

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #21 : 13.01.16 - klo:15.14 »
Pitää korjata xorg.conf. Lue vaikka Arch Linux tai Gentoon wikiä. InputDevice taitaa olla InputClass nykyään. Itse käytän hiirelle ja näppäimistölle evdev ajuria.
Suurin osa konfiguraatiosta on nykyisin turhaa, kun automatiikkakin toimii. Nuo nvidia-xconfigin lisäämät säädöt voi siis halutessaan poistaa. Ei niistä kuitenkaan yleensä ole haittaakaan, ja ajurin uudelleenasennus saattaa lisätä ne taas xorg.confiin.

X:n konffaus on muuttunut vuosien mittaan. Riippuu hieman mikä X ja WM käytössä. TwinView antaa sinulle yhden ison työpöydän. Tarvitset kaksi monitor sektiota. Nyt vain yksi
Ei tarvita välttämättä yhtään monitor-sectionia. Niistä on hyötyä lähinnä lisättäessä omia modelineja.

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #22 : 13.01.16 - klo:15.32 »
Kokeile vaikka tällaista xorg.conf-muokkausta. Korvaa rivi:

Koodia: [Valitse]
Option         "metamodes" "DVI-I-1: nvidia-auto-select +0+0, DVI-I-2: nvidia-auto-select +1280+0"
Tällä:

Koodia: [Valitse]
Option         "metamodes" "DVI-I-3: nvidia-auto-select +0+0, DVI-I-0: nvidia-auto-select +1920+0"

Tiedostoa voi siis editoida esimerkiksi geditillä:

Koodia: [Valitse]
sudo -i gedit /etc/X11/xorg.conf

Ok kokeilen tänään miten homma lähtee jekittämään!

gedit: xorg näyttää nyt tältä:
Koodia: [Valitse]
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 352.21  (buildd@lgw01-37)  Thu Jul 23 11:50:49 UTC 2015


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "HIQ L72D D-sub"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTX"
EndSection

Section "Screen"

# Removed Option "metamodes" "DVI-I-1: nvidia-auto-select +0+0, DVI-I-2: nvidia-auto-select +1360+0"
# Removed Option "nvidiaXineramaInfoOrder" "DFP-0"
# Removed Option "metamodes" "DVI-I-3: nvidia-auto-select +1920+0, DVI-I-2: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-1"
    Option         "metamodes" "DVI-I-3: nvidia-auto-select +0+0, DVI-I-0: nvidia-auto-select +1920+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Mutta näytöt edelleenkin väärin. nvidia-settings näyttää liitteeltä
« Viimeksi muokattu: 13.01.16 - klo:16.17 kirjoittanut uhappo »
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

Postimies

  • Käyttäjä
  • Viestejä: 2619
    • Profiili
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #23 : 13.01.16 - klo:16.44 »
Ei tarvita välttämättä yhtään monitor-sectionia. Niistä on hyötyä lähinnä lisättäessä omia modelineja.
Taikka jos haluaa virran säästön pois ja muistaakseni myös näytön EDID arvot voi lukea tiedostosta. Ja voi niihin lisätä myös sijainnin. Esim.
Section "Monitor"
    Identifier  "VGA1"
    Option      "Primary" "true"
EndSection

Section "Monitor"
    Identifier  "HDMI1"
    Option      "LeftOf" "VGA1"
EndSection

Koordinaatteja voi käyttää myös.
    Option      "PreferredMode" "1024x768"
    Option      "Position" "1920 312"


Noita muuttujia voi sitten käyttää muuallakin.
Ongelmaksi voi tulla myös kokoruudun pelit ja
videot. Ei kiva jos näkyvät kahdella näytöllä.

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #24 : 13.01.16 - klo:17.02 »
Jos lähtee kokeilemaan noita geneerisempiä asetuksia, metamodes-rivi kannattanee kommentoida pois käytöstä (#-merkki rivin alkuun).

Monitor-sectionin sisällä oleva identifier määrää, mihin näyttöön asetukset vaikuttavat. Sen tulee olla samassa muodossa kuin xrandr:n listaama nimi, eli uhapolla DVI-I-0 tai DVI-I-3

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #25 : 13.01.16 - klo:17.09 »
gedit: xorg näyttää nyt tältä:

Mutta näytöt edelleenkin väärin. nvidia-settings näyttää liitteeltä

Kirjauduit varmaankin jo ulos ja takaisin sisään? Mitä X.org:n lokitiedosto kertoo? Laita /var/log/Xorg.0.log viestin liitteeksi.

Kokeile myös siirtää ~/.config/monitors.xml syrjään:

Koodia: [Valitse]
sudo mv ~/.config/monitors.xml ~/.config/monitors.xml.old
« Viimeksi muokattu: 13.01.16 - klo:17.13 kirjoittanut nm »

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #26 : 13.01.16 - klo:19.37 »
Koodia: [Valitse]
/var/log/Xorg.0.log
Koodia: [Valitse]
[     6.520]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[     6.520] X Protocol Version 11, Revision 0
[     6.520] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.520] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 13 19:31:08 2016
[     6.520] (==) Using config file: "/etc/X11/xorg.conf"
[     6.520] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.521] (==) ServerLayout "Layout0"
[     6.521] (**) |-->Screen "Screen0" (0)
[     6.521] (**) |   |-->Monitor "Monitor0"
[     6.521] (**) |   |-->Device "Device0"
[     6.521] (**) |-->Input Device "Keyboard0"
[     6.521] (**) |-->Input Device "Mouse0"
[     6.521] (**) Option "Xinerama" "0"
[     6.521] (==) Automatically adding devices
[     6.521] (==) Automatically enabling devices
[     6.521] (==) Automatically adding GPU devices
[     6.521] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.521] Entry deleted from font path.
[     6.521] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     6.521] Entry deleted from font path.
[     6.521] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     6.521] Entry deleted from font path.
[     6.521] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     6.521] Entry deleted from font path.
[     6.521] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     6.521] Entry deleted from font path.
[     6.521] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[     6.521] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     6.521] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     6.521] (WW) Disabling Keyboard0
[     6.521] (WW) Disabling Mouse0
[     6.521] (II) Loader magic: 0x55dadf09cd40
[     6.521] (II) Module ABI versions:
[     6.521] X.Org ANSI C Emulation: 0.4
[     6.521] X.Org Video Driver: 19.0
[     6.521] X.Org XInput driver : 21.0
[     6.521] X.Org Server Extension : 9.0
[     6.521] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.523] (--) PCI:*(0:1:0:0) 10de:0191:1043:8233 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[     6.523] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     6.523] (II) "glx" will be loaded by default.
[     6.523] (II) LoadModule: "glx"
[     6.523] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     6.630] (II) Module glx: vendor="NVIDIA Corporation"
[     6.630] compiled for 4.0.2, module version = 1.0.0
[     6.630] Module class: X.Org Server Extension
[     6.630] (II) NVIDIA GLX Module  340.96  Sun Nov  8 22:06:18 PST 2015
[     6.630] (II) LoadModule: "nvidia"
[     6.630] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     6.630] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.630] compiled for 4.0.2, module version = 1.0.0
[     6.630] Module class: X.Org Video Driver
[     6.630] (II) NVIDIA dlloader X Driver  340.96  Sun Nov  8 21:46:28 PST 2015
[     6.630] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.630] (++) using VT number 7

[     6.633] (II) Loading sub module "fb"
[     6.633] (II) LoadModule: "fb"
[     6.634] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.634] (II) Module fb: vendor="X.Org Foundation"
[     6.634] compiled for 1.17.2, module version = 1.0.0
[     6.634] ABI class: X.Org ANSI C Emulation, version 0.4
[     6.634] (WW) Unresolved symbol: fbGetGCPrivateKey
[     6.634] (II) Loading sub module "wfb"
[     6.634] (II) LoadModule: "wfb"
[     6.634] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     6.634] (II) Module wfb: vendor="X.Org Foundation"
[     6.634] compiled for 1.17.2, module version = 1.0.0
[     6.634] ABI class: X.Org ANSI C Emulation, version 0.4
[     6.634] (II) Loading sub module "ramdac"
[     6.634] (II) LoadModule: "ramdac"
[     6.634] (II) Module "ramdac" already built-in
[     6.635] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     6.635] (==) NVIDIA(0): RGB weight 888
[     6.635] (==) NVIDIA(0): Default visual is TrueColor
[     6.635] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.635] (**) NVIDIA(0): Option "Stereo" "0"
[     6.635] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[     6.635] (**) NVIDIA(0): Option "SLI" "Off"
[     6.635] (**) NVIDIA(0): Option "MultiGPU" "Off"
[     6.635] (**) NVIDIA(0): Option "BaseMosaic" "off"
[     6.635] (**) NVIDIA(0): Stereo disabled by request
[     6.635] (**) NVIDIA(0): NVIDIA SLI disabled.
[     6.635] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[     6.635] (**) NVIDIA(0): Option "MetaModes" "DVI-I-3: nvidia-auto-select +0+0, DVI-I-0: nvidia-auto-select +1920+0"
[     6.635] (**) NVIDIA(0): Enabling 2D acceleration
[     7.576] (II) NVIDIA(0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[     7.576] (II) NVIDIA(0):     Vision stereo.
[     7.596] (II) NVIDIA(0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[     7.596] (II) NVIDIA(0):     3D Vision stereo.
[     7.596] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[     7.600] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTX (G80) at PCI:1:0:0 (GPU-0)
[     7.600] (--) NVIDIA(0): Memory: 786432 kBytes
[     7.600] (--) NVIDIA(0): VideoBIOS: 60.80.13.00.00
[     7.600] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     7.605] (--) NVIDIA(0): Valid display device(s) on GeForce 8800 GTX at PCI:1:0:0
[     7.605] (--) NVIDIA(0):     HIQ L72D D-sub (CRT-0) (connected)
[     7.605] (--) NVIDIA(0):     CRT-1
[     7.605] (--) NVIDIA(0):     TV-0
[     7.605] (--) NVIDIA(0):     DFP-0
[     7.605] (--) NVIDIA(0):     Samsung SyncMaster (DFP-1) (boot, connected)
[     7.605] (--) NVIDIA(GPU-0): HIQ L72D D-sub (CRT-0): 400.0 MHz maximum pixel clock
[     7.605] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[     7.605] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[     7.605] (--) NVIDIA(0): DFP-0: Internal TMDS
[     7.605] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     7.605] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal TMDS
[     7.606] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock
[     7.606] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     7.606] (**) NVIDIA(0):     device HIQ L72D D-sub (CRT-0) (Using EDID frequencies has
[     7.606] (**) NVIDIA(0):     been enabled on all display devices.)
[     7.606] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     7.606] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[     7.606] (**) NVIDIA(0):     has been enabled on all display devices.)
[     7.608] (II) NVIDIA(0): Validated MetaModes:
[     7.608] (II) NVIDIA(0):   
[     7.608] (II) NVIDIA(0):     "DVI-I-3:nvidia-auto-select+0+0,DVI-I-0:nvidia-auto-select+1920+0"
[     7.608] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[     7.641] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[     7.641] (--) NVIDIA(0):     option
[     7.641] (--) Depth 24 pixmap format is 32 bpp
[     7.641] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[     7.650] (II) NVIDIA(0): Setting mode "DVI-I-3:nvidia-auto-select+0+0,DVI-I-0:nvidia-auto-select+1920+0"
[     7.741] (==) NVIDIA(0): Disabling shared memory pixmaps
[     7.741] (==) NVIDIA(0): Backing store enabled
[     7.741] (==) NVIDIA(0): Silken mouse enabled
[     7.741] (**) NVIDIA(0): DPMS enabled
[     7.741] (II) Loading sub module "dri2"
[     7.741] (II) LoadModule: "dri2"
[     7.741] (II) Module "dri2" already built-in
[     7.741] (II) NVIDIA(0): [DRI2] Setup complete
[     7.741] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     7.741] (--) RandR disabled
[     7.745] (II) SELinux: Disabled on system
[     7.746] (II) Initializing extension GLX
[     7.746] (II) Indirect GLX disabled.(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[     7.769] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     7.769] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.769] (II) LoadModule: "evdev"
[     7.769] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.772] (II) Module evdev: vendor="X.Org Foundation"
[     7.772] compiled for 1.17.1, module version = 2.9.2
[     7.772] Module class: X.Org XInput Driver
[     7.772] ABI class: X.Org XInput driver, version 21.0
[     7.772] (II) Using input driver 'evdev' for 'Power Button'
[     7.772] (**) Power Button: always reports core events
[     7.772] (**) evdev: Power Button: Device: "/dev/input/event1"
[     7.772] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.772] (--) evdev: Power Button: Found keys
[     7.772] (II) evdev: Power Button: Configuring as keyboard
[     7.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     7.772] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.772] (**) Option "xkb_rules" "evdev"
[     7.772] (**) Option "xkb_model" "pc105"
[     7.772] (**) Option "xkb_layout" "fi"
[     7.774] (II) XKB: reuse xkmfile /var/lib/xkb/server-F30D752BAEAAD4B8C79BE2C421539A0D3700902C.xkm
[     7.774] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     7.774] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.774] (II) Using input driver 'evdev' for 'Power Button'
[     7.774] (**) Power Button: always reports core events
[     7.774] (**) evdev: Power Button: Device: "/dev/input/event0"
[     7.774] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.774] (--) evdev: Power Button: Found keys
[     7.774] (II) evdev: Power Button: Configuring as keyboard
[     7.774] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     7.774] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     7.777] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event2)
[     7.777] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[     7.777] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[     7.777] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[     7.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0518:0001.0001/input/input5/event2"
[     7.778] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 8)
[     7.778] (**) Option "xkb_rules" "evdev"
[     7.778] (**) Option "xkb_model" "pc105"
[     7.778] (**) Option "xkb_layout" "fi"
[     7.778] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event3)
[     7.778] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[     7.778] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[     7.778] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[     7.780] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[     7.780] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 10)
[     7.780] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[     7.780] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse1)
[     7.780] (II) No input driver specified, ignoring this device.
[     7.780] (II) This device may have been added with another device file.
[     8.542] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[     8.542] (II) NVIDIA(GPU-0):     Vision stereo.
[     8.562] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[     8.562] (II) NVIDIA(GPU-0):     3D Vision stereo.
[     8.878] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[     9.078] (II) NVIDIA(0): Setting mode "DVI-I-3: nvidia-auto-select @1920x1080 +1280+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[     9.392] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[     9.392] (II) NVIDIA(GPU-0):     Vision stereo.
[     9.412] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[     9.412] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    15.451] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[    15.451] (II) NVIDIA(GPU-0):     Vision stereo.
[    15.472] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    15.472] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    15.591] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[    15.592] (II) NVIDIA(GPU-0):     Vision stereo.
[    15.613] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    15.613] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    15.873] (II) XKB: reuse xkmfile /var/lib/xkb/server-F30D752BAEAAD4B8C79BE2C421539A0D3700902C.xkm
[    16.423] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[    16.423] (II) NVIDIA(GPU-0):     Vision stereo.
[    16.444] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    16.444] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    16.912] (II) XKB: reuse xkmfile /var/lib/xkb/server-DEB504F027C6721080600CA3929E96BB3BF47290.xkm
[    16.947] (II) XKB: reuse xkmfile /var/lib/xkb/server-DEB504F027C6721080600CA3929E96BB3BF47290.xkm
[    18.154] (II) XKB: reuse xkmfile /var/lib/xkb/server-49B968D92CE2B9A6B0892106F2871607A6B556B5.xkm
[    32.517] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[    32.517] (II) NVIDIA(GPU-0):     Vision stereo.
[    32.538] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    32.538] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    32.634] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[    32.634] (II) NVIDIA(GPU-0):     Vision stereo.
[    32.654] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    32.654] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    32.751] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[    32.751] (II) NVIDIA(GPU-0):     Vision stereo.
[    32.771] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    32.771] (II) NVIDIA(GPU-0):     3D Vision stereo.

Koodia: [Valitse]
~/.config/monitors.xml tuon syrjään heittämistä en oo vielä tehny, myös metamodes-rivin pois jättäminen on kokeilematta
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #27 : 13.01.16 - klo:20.19 »
Nyt tehty noi muutokset, eli xml ja metamodes-rivi hashtagattu

Koodia: [Valitse]
/var/log/Xorg.0.log
Koodia: [Valitse]
[  2589.580]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[  2589.580] X Protocol Version 11, Revision 0
[  2589.580] Build Operating System: Linux 3.13.0-68-generic x86_64 Ubuntu
[  2589.580] Current Operating System: Linux urkkimasiina 4.2.0-23-generic #28-Ubuntu SMP Sun Dec 27 17:47:31 UTC 2015 x86_64
[  2589.580] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-23-generic root=UUID=7c9c9c76-1b99-4d2e-a546-93e67f969248 ro quiet splash
[  2589.580] Build Date: 12 November 2015  05:33:29PM
[  2589.580] xorg-server 2:1.17.2-1ubuntu9.1 (For technical support please see http://www.ubuntu.com/support)
[  2589.580] Current version of pixman: 0.32.6
[  2589.580] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[  2589.580] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2589.580] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 13 20:14:54 2016
[  2589.580] (==) Using config file: "/etc/X11/xorg.conf"
[  2589.580] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2589.580] (==) ServerLayout "Layout0"
[  2589.580] (**) |-->Screen "Screen0" (0)
[  2589.580] (**) |   |-->Monitor "Monitor0"
[  2589.580] (**) |   |-->Device "Device0"
[  2589.580] (**) |-->Input Device "Keyboard0"
[  2589.580] (**) |-->Input Device "Mouse0"
[  2589.581] (**) Option "Xinerama" "0"
[  2589.581] (==) Automatically adding devices
[  2589.581] (==) Automatically enabling devices
[  2589.581] (==) Automatically adding GPU devices
[  2589.581] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  2589.581] Entry deleted from font path.
[  2589.581] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  2589.581] Entry deleted from font path.
[  2589.581] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  2589.581] Entry deleted from font path.
[  2589.581] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  2589.581] Entry deleted from font path.
[  2589.581] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  2589.581] Entry deleted from font path.
[  2589.581] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[  2589.581] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[  2589.581] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  2589.581] (WW) Disabling Keyboard0
[  2589.581] (WW) Disabling Mouse0
[  2589.581] (II) Loader magic: 0x5625a2a69d40
[  2589.581] (II) Module ABI versions:
[  2589.581] X.Org ANSI C Emulation: 0.4
[  2589.581] X.Org Video Driver: 19.0
[  2589.581] X.Org XInput driver : 21.0
[  2589.581] X.Org Server Extension : 9.0
[  2589.581] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2589.582] (--) PCI:*(0:1:0:0) 10de:0191:1043:8233 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[  2589.582] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[  2589.582] (II) "glx" will be loaded by default.
[  2589.582] (II) LoadModule: "glx"
[  2589.582] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[  2589.595] (II) Module glx: vendor="NVIDIA Corporation"
[  2589.595] compiled for 4.0.2, module version = 1.0.0
[  2589.595] Module class: X.Org Server Extension
[  2589.595] (II) NVIDIA GLX Module  340.96  Sun Nov  8 22:06:18 PST 2015
[  2589.595] (II) LoadModule: "nvidia"
[  2589.595] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[  2589.595] (II) Module nvidia: vendor="NVIDIA Corporation"
[  2589.595] compiled for 4.0.2, module version = 1.0.0
[  2589.595] Module class: X.Org Video Driver
[  2589.595] (II) NVIDIA dlloader X Driver  340.96  Sun Nov  8 21:46:28 PST 2015
[  2589.595] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  2589.595] (++) using VT number 7

[  2589.598] (II) Loading sub module "fb"
[  2589.598] (II) LoadModule: "fb"
[  2589.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2589.598] (II) Module fb: vendor="X.Org Foundation"
[  2589.598] compiled for 1.17.2, module version = 1.0.0
[  2589.598] ABI class: X.Org ANSI C Emulation, version 0.4
[  2589.598] (WW) Unresolved symbol: fbGetGCPrivateKey
[  2589.598] (II) Loading sub module "wfb"
[  2589.598] (II) LoadModule: "wfb"
[  2589.598] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  2589.598] (II) Module wfb: vendor="X.Org Foundation"
[  2589.598] compiled for 1.17.2, module version = 1.0.0
[  2589.598] ABI class: X.Org ANSI C Emulation, version 0.4
[  2589.598] (II) Loading sub module "ramdac"
[  2589.598] (II) LoadModule: "ramdac"
[  2589.598] (II) Module "ramdac" already built-in
[  2589.599] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[  2589.599] (==) NVIDIA(0): RGB weight 888
[  2589.599] (==) NVIDIA(0): Default visual is TrueColor
[  2589.599] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  2589.599] (**) NVIDIA(0): Option "Stereo" "0"
[  2589.599] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[  2589.599] (**) NVIDIA(0): Option "SLI" "Off"
[  2589.599] (**) NVIDIA(0): Option "MultiGPU" "Off"
[  2589.599] (**) NVIDIA(0): Option "BaseMosaic" "off"
[  2589.599] (**) NVIDIA(0): Stereo disabled by request
[  2589.599] (**) NVIDIA(0): NVIDIA SLI disabled.
[  2589.599] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[  2589.599] (**) NVIDIA(0): Enabling 2D acceleration
[  2590.137] (II) NVIDIA(0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[  2590.137] (II) NVIDIA(0):     Vision stereo.
[  2590.157] (II) NVIDIA(0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[  2590.157] (II) NVIDIA(0):     3D Vision stereo.
[  2590.157] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[  2590.160] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTX (G80) at PCI:1:0:0 (GPU-0)
[  2590.160] (--) NVIDIA(0): Memory: 786432 kBytes
[  2590.160] (--) NVIDIA(0): VideoBIOS: 60.80.13.00.00
[  2590.160] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  2590.166] (--) NVIDIA(0): Valid display device(s) on GeForce 8800 GTX at PCI:1:0:0
[  2590.166] (--) NVIDIA(0):     HIQ L72D D-sub (CRT-0) (connected)
[  2590.166] (--) NVIDIA(0):     CRT-1
[  2590.166] (--) NVIDIA(0):     TV-0
[  2590.166] (--) NVIDIA(0):     DFP-0
[  2590.166] (--) NVIDIA(0):     Samsung SyncMaster (DFP-1) (boot, connected)
[  2590.166] (--) NVIDIA(GPU-0): HIQ L72D D-sub (CRT-0): 400.0 MHz maximum pixel clock
[  2590.166] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[  2590.166] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[  2590.166] (--) NVIDIA(0): DFP-0: Internal TMDS
[  2590.166] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[  2590.166] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal TMDS
[  2590.166] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock
[  2590.166] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2590.166] (**) NVIDIA(0):     device HIQ L72D D-sub (CRT-0) (Using EDID frequencies has
[  2590.166] (**) NVIDIA(0):     been enabled on all display devices.)
[  2590.167] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2590.167] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[  2590.167] (**) NVIDIA(0):     has been enabled on all display devices.)
[  2590.168] (==) NVIDIA(0):
[  2590.168] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  2590.168] (==) NVIDIA(0):     will be used as the requested mode.
[  2590.168] (==) NVIDIA(0):
[  2590.168] (II) NVIDIA(0): Validated MetaModes:
[  2590.168] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select,CRT-0:nvidia-auto-select"
[  2590.168] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[  2590.192] (--) NVIDIA(0): DPI set to (93, 85); computed from "UseEdidDpi" X config
[  2590.192] (--) NVIDIA(0):     option
[  2590.192] (--) Depth 24 pixmap format is 32 bpp
[  2590.193] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[  2590.201] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select,CRT-0:nvidia-auto-select"
[  2590.293] (==) NVIDIA(0): Disabling shared memory pixmaps
[  2590.293] (==) NVIDIA(0): Backing store enabled
[  2590.293] (==) NVIDIA(0): Silken mouse enabled
[  2590.293] (**) NVIDIA(0): DPMS enabled
[  2590.293] (II) Loading sub module "dri2"
[  2590.293] (II) LoadModule: "dri2"
[  2590.293] (II) Module "dri2" already built-in
[  2590.293] (II) NVIDIA(0): [DRI2] Setup complete
[  2590.293] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  2590.293] (--) RandR disabled
[  2590.297] (II) SELinux: Disabled on system
[  2590.297] (II) Initializing extension GLX
[  2590.297] (II) Indirect GLX disabled.(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[  2590.320] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  2590.320] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2590.320] (II) LoadModule: "evdev"
[  2590.321] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2590.321] (II) Module evdev: vendor="X.Org Foundation"
[  2590.321] compiled for 1.17.1, module version = 2.9.2
[  2590.321] Module class: X.Org XInput Driver
[  2590.321] ABI class: X.Org XInput driver, version 21.0
[  2590.321] (II) Using input driver 'evdev' for 'Power Button'
[  2590.321] (**) Power Button: always reports core events
[  2590.321] (**) evdev: Power Button: Device: "/dev/input/event1"
[  2590.321] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2590.321] (--) evdev: Power Button: Found keys
[  2590.321] (II) evdev: Power Button: Configuring as keyboard
[  2590.321] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[  2590.321] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2590.321] (**) Option "xkb_rules" "evdev"
[  2590.321] (**) Option "xkb_model" "pc105"
[  2590.321] (**) Option "xkb_layout" "fi"
[  2590.322] (II) XKB: reuse xkmfile /var/lib/xkb/server-F30D752BAEAAD4B8C79BE2C421539A0D3700902C.xkm
[  2590.323] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  2590.323] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2590.323] (II) Using input driver 'evdev' for 'Power Button'
[  2590.323] (**) Power Button: always reports core events
[  2590.323] (**) evdev: Power Button: Device: "/dev/input/event0"
[  2590.323] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2590.323] (--) evdev: Power Button: Found keys
[  2590.323] (II) evdev: Power Button: Configuring as keyboard
[  2590.323] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[  2590.323] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  2590.323] (**) Option "xkb_rules" "evdev"
[  2590.323] (**) Option "xkb_model" "pc105"
[  2590.323] (**) Option "xkb_layout" "fi"
[  2590.326] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event2)
[  2590.326] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[  2590.326] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[  2590.326] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[  2590.326] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event2"
[  2590.326] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[  2590.326] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[  2590.326] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[  2590.326] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0518:0001.0001/input/input5/event2"
[  2590.326] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 8)
[  2590.326] (**) Option "xkb_rules" "evdev"
[  2590.326] (**) Option "xkb_model" "pc105"
[  2590.326] (**) Option "xkb_layout" "fi"
[  2590.327] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event3)
[  2590.327] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[  2590.327] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[  2590.327] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2590.327] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/0003:0518:0001.0002/input/input6/event3"
[  2590.327] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 9)
[  2590.327] (**) Option "xkb_rules" "evdev"
[  2590.327] (**) Option "xkb_model" "pc105"
[  2590.327] (**) Option "xkb_layout" "fi"
[  2590.327] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: initialized for relative axes.
[  2590.327] (WW) evdev: Plus More Enterprise LTD. USB-compliant keyboard: ignoring absolute axes.
[  2590.328] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) keeping acceleration scheme 1
[  2590.328] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration profile 0
[  2590.328] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration factor: 2.000
[  2590.328] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration threshold: 4
[  2590.328] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/mouse0)
[  2590.328] (II) No input driver specified, ignoring this device.
[  2590.328] (II) This device may have been added with another device file.
[  2590.328] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
[  2590.328] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[  2590.328] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[  2590.328] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[  2590.328] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
[  2590.328] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[  2590.328] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[  2590.328] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[  2590.328] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[  2590.328] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[  2590.328] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[  2590.328] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[  2590.328] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[  2590.328] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2590.328] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[  2590.328] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 10)
[  2590.329] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[  2590.329] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[  2590.329] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[  2590.329] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[  2590.329] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[  2590.329] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse1)
[  2590.329] (II) No input driver specified, ignoring this device.
[  2590.329] (II) This device may have been added with another device file.
[  2591.290] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[  2591.290] (II) NVIDIA(GPU-0):     Vision stereo.
[  2591.310] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[  2591.310] (II) NVIDIA(GPU-0):     3D Vision stereo.
[  2591.429] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[  2591.630] (II) NVIDIA(0): Setting mode "DVI-I-3: nvidia-auto-select @1920x1080 +1280+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[  2591.928] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[  2591.928] (II) NVIDIA(GPU-0):     Vision stereo.
[  2591.949] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[  2591.949] (II) NVIDIA(GPU-0):     3D Vision stereo.
[  2597.858] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[  2597.858] (II) NVIDIA(GPU-0):     Vision stereo.
[  2597.879] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[  2597.879] (II) NVIDIA(GPU-0):     3D Vision stereo.
[  2597.976] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[  2597.976] (II) NVIDIA(GPU-0):     Vision stereo.
[  2597.996] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[  2597.996] (II) NVIDIA(GPU-0):     3D Vision stereo.
[  2598.245] (II) XKB: reuse xkmfile /var/lib/xkb/server-F30D752BAEAAD4B8C79BE2C421539A0D3700902C.xkm
[  2598.798] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[  2598.798] (II) NVIDIA(GPU-0):     Vision stereo.
[  2598.819] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[  2598.819] (II) NVIDIA(GPU-0):     3D Vision stereo.
[  2599.293] (II) XKB: reuse xkmfile /var/lib/xkb/server-DEB504F027C6721080600CA3929E96BB3BF47290.xkm
[  2599.349] (II) XKB: reuse xkmfile /var/lib/xkb/server-DEB504F027C6721080600CA3929E96BB3BF47290.xkm
[  2600.464] (II) XKB: reuse xkmfile /var/lib/xkb/server-49B968D92CE2B9A6B0892106F2871607A6B556B5.xkm
[  2614.752] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[  2614.752] (II) NVIDIA(GPU-0):     Vision stereo.
[  2614.773] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[  2614.773] (II) NVIDIA(GPU-0):     3D Vision stereo.
[  2614.870] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[  2614.870] (II) NVIDIA(GPU-0):     Vision stereo.
[  2614.890] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[  2614.890] (II) NVIDIA(GPU-0):     3D Vision stereo.
[  2615.004] (II) NVIDIA(GPU-0): Display (HIQ L72D D-sub (CRT-0)) does not support NVIDIA 3D
[  2615.004] (II) NVIDIA(GPU-0):     Vision stereo.
[  2615.025] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[  2615.025] (II) NVIDIA(GPU-0):     3D Vision stereo.

HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #28 : 13.01.16 - klo:20.19 »
xorg

Koodia: [Valitse]
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 352.21  (buildd@lgw01-37)  Thu Jul 23 11:50:49 UTC 2015


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "HIQ L72D D-sub"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTX"
EndSection

Section "Screen"

# Removed Option "metamodes" "DVI-I-1: nvidia-auto-select +0+0, DVI-I-2: nvidia-auto-select +1360+0"
# Removed Option "nvidiaXineramaInfoOrder" "DFP-0"
# Removed Option "metamodes" "DVI-I-3: nvidia-auto-select +1920+0, DVI-I-2: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "CRT-1"
#   Option         "metamodes" "DVI-I-3: nvidia-auto-select +0+0, DVI-I-0: nvidia-auto-select +1920+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Edelleen vääritepäin näytöt
« Viimeksi muokattu: 13.01.16 - klo:20.38 kirjoittanut uhappo »
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #29 : 13.01.16 - klo:20.55 »
Koodia: [Valitse]
/
[     7.608] (II) NVIDIA(0): Validated MetaModes:
[     7.608] (II) NVIDIA(0):   
[     7.608] (II) NVIDIA(0):     "DVI-I-3:nvidia-auto-select+0+0,DVI-I-0:nvidia-auto-select+1920+0"
[     7.608] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[     7.641] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[     7.641] (--) NVIDIA(0):     option
[     7.641] (--) Depth 24 pixmap format is 32 bpp
[     7.641] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[     7.650] (II) NVIDIA(0): Setting mode "DVI-I-3:nvidia-auto-select+0+0,DVI-I-0:nvidia-auto-select+1920+0"

Koodia: [Valitse]
[     8.878] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[     9.078] (II) NVIDIA(0): Setting mode "DVI-I-3: nvidia-auto-select @1920x1080 +1280+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"

Jostain syystä ajuri ottaa nuo väärät säädöt käyttöön myöhemmin, vaikka ensin olisi ladattu oikeat asetukset xorg.confista.
En tiedä, mikä komponentti tämän aiheuttaa, jos monitors.xml:kin on nyt poistettu.


Nyt tehty noi muutokset, eli xml ja metamodes-rivi hashtagattu

Lisäksi pitäisi tehdä Monitor-sectionit oikeilla tunnisteilla ja keskinäisellä asettelulla.

Kokeile kuitenkin vielä tätä asetusta Screen-sectionissa:

Koodia: [Valitse]
Option         "MetaModeOrientation" "DFP-1 LeftOf CRT-0"
Tai tällaista xrandr-komentoa päätteessä (saattaa kaataa työpöydän, jos sellaista kerran ilmenee graafisilla asetustyökaluillakin):

Koodia: [Valitse]
xrandr --output DVI-I-3 --auto --output DVI-I-0 --auto --right-of DVI-I-3

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #30 : 13.01.16 - klo:21.19 »
xrandr-komento kaataa työpöydän
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #31 : 13.01.16 - klo:22.29 »
Koodia: [Valitse]
/
[     7.608] (II) NVIDIA(0): Validated MetaModes:
[     7.608] (II) NVIDIA(0):   
[     7.608] (II) NVIDIA(0):     "DVI-I-3:nvidia-auto-select+0+0,DVI-I-0:nvidia-auto-select+1920+0"
[     7.608] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[     7.641] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[     7.641] (--) NVIDIA(0):     option
[     7.641] (--) Depth 24 pixmap format is 32 bpp
[     7.641] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[     7.650] (II) NVIDIA(0): Setting mode "DVI-I-3:nvidia-auto-select+0+0,DVI-I-0:nvidia-auto-select+1920+0"

Koodia: [Valitse]
[     8.878] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[     9.078] (II) NVIDIA(0): Setting mode "DVI-I-3: nvidia-auto-select @1920x1080 +1280+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"

Jostain syystä ajuri ottaa nuo väärät säädöt käyttöön myöhemmin, vaikka ensin olisi ladattu oikeat asetukset xorg.confista.
En tiedä, mikä komponentti tämän aiheuttaa, jos monitors.xml:kin on nyt poistettu.

Syyllinen on ilmeisesti LightDM: http://askubuntu.com/questions/421730/xorg-conf-changes-from-nvidia-setting-have-no-effect-after-reboot/424533#424533

Koska se onnistuu muuttamaan näyttöjen paikkoja kaatamatta mitään, pitäisi olla mahdollista tehdä monitors.xml-tiedosto, jossa on asetettu oikeat sijainnit, ja kopioida tiedosto LightDM:n "kotihakemistoon", jolloin asetukset tulevat käyttöön.
monitors.xml:ää pitänee muokata käsin, jos Ubuntun näyttöasetustyökalu kaataa työpöydän ennen kuin se onnistuu tallentamaan asetuksia tiedostoon. Näytä tiedoston sisältö, jos kaipaat neuvoja muokkaukseen.

Valmis tiedosto kopioidaan LightDM:n asetuksiin näin:

Koodia: [Valitse]
sudo cp monitors.xml /var/lib/lightdm/.config/

Tarttuuko muuten X.org:n edelliseen lokiin (/var/log/Xorg.1.log) mitään siitä, kun työpöytä kaatuu näyttöasetuksia muutettaessa? Se ei ole yleinen ongelma, enkä heti löydä vastaavaa, mutta virheilmoituksella saattaisi löytyä lisää vinkkejä.

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #32 : 13.01.16 - klo:22.47 »
Koodia: [Valitse]
/
[     7.608] (II) NVIDIA(0): Validated MetaModes:
[     7.608] (II) NVIDIA(0):   
[     7.608] (II) NVIDIA(0):     "DVI-I-3:nvidia-auto-select+0+0,DVI-I-0:nvidia-auto-select+1920+0"
[     7.608] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[     7.641] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[     7.641] (--) NVIDIA(0):     option
[     7.641] (--) Depth 24 pixmap format is 32 bpp
[     7.641] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[     7.650] (II) NVIDIA(0): Setting mode "DVI-I-3:nvidia-auto-select+0+0,DVI-I-0:nvidia-auto-select+1920+0"

Koodia: [Valitse]
[     8.878] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[     9.078] (II) NVIDIA(0): Setting mode "DVI-I-3: nvidia-auto-select @1920x1080 +1280+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"

Jostain syystä ajuri ottaa nuo väärät säädöt käyttöön myöhemmin, vaikka ensin olisi ladattu oikeat asetukset xorg.confista.
En tiedä, mikä komponentti tämän aiheuttaa, jos monitors.xml:kin on nyt poistettu.

Syyllinen on ilmeisesti LightDM: http://askubuntu.com/questions/421730/xorg-conf-changes-from-nvidia-setting-have-no-effect-after-reboot/424533#424533

Koska se onnistuu muuttamaan näyttöjen paikkoja kaatamatta mitään, pitäisi olla mahdollista tehdä monitors.xml-tiedosto, jossa on asetettu oikeat sijainnit, ja kopioida tiedosto LightDM:n "kotihakemistoon", jolloin asetukset tulevat käyttöön.
monitors.xml:ää pitänee muokata käsin, jos Ubuntun näyttöasetustyökalu kaataa työpöydän ennen kuin se onnistuu tallentamaan asetuksia tiedostoon. Näytä tiedoston sisältö, jos kaipaat neuvoja muokkaukseen.

Valmis tiedosto kopioidaan LightDM:n asetuksiin näin:

Koodia: [Valitse]
sudo cp monitors.xml /var/lib/lightdm/.config/

Tarttuuko muuten X.org:n edelliseen lokiin (/var/log/Xorg.1.log) mitään siitä, kun työpöytä kaatuu näyttöasetuksia muutettaessa? Se ei ole yleinen ongelma, enkä heti löydä vastaavaa, mutta virheilmoituksella saattaisi löytyä lisää vinkkejä.

Voi hitsi, koneet jo kiinni yms.. Laittelen huomisaamuna tekstejä esille!
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #33 : 14.01.16 - klo:12.20 »
Doddih, monitors näyttää siis tältä:
Koodia: [Valitse]
<monitors version="1">
  <configuration>
      <clone>no</clone>
      <output name="DVI-I-1">
          <vendor>SAM</vendor>
          <product>0x0485</product>
          <serial>0x434d3233</serial>
          <width>1920</width>
          <height>1080</height>
          <rate>60</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>yes</primary>
      </output>
      <output name="DVI-I-2">
      </output>
  </configuration>
  <configuration>
      <clone>no</clone>
      <output name="DVI-I-0">
          <vendor>SAM</vendor>
          <product>0x0679</product>
          <serial>0x00000000</serial>
          <width>1360</width>
          <height>768</height>
          <rate>60</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>yes</primary>
      </output>
      <output name="DVI-I-1">
      </output>
      <output name="TV-0">
      </output>
      <output name="DVI-I-2">
      </output>
      <output name="DVI-I-3">
          <vendor>SAM</vendor>
          <product>0x0485</product>
          <serial>0x434d3233</serial>
          <width>1920</width>
          <height>1080</height>
          <rate>60</rate>
          <x>1360</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>no</primary>
      </output>
  </configuration>
  <configuration>
      <clone>no</clone>
      <output name="DVI-I-0">
      </output>
      <output name="DVI-I-1">
          <vendor>SAM</vendor>
          <product>0x0679</product>
          <serial>0x00000000</serial>
          <width>1360</width>
          <height>768</height>
          <rate>60</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>yes</primary>
      </output>
      <output name="TV-0">
      </output>
      <output name="DVI-I-2">
          <vendor>SAM</vendor>
          <product>0x0485</product>
          <serial>0x434d3233</serial>
          <width>1920</width>
          <height>1080</height>
          <rate>60</rate>
          <x>1360</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>no</primary>
      </output>
      <output name="DVI-I-3">
      </output>
  </configuration>
  <configuration>
      <clone>no</clone>
      <output name="DVI-I-0">
      </output>
      <output name="DVI-I-1">
          <vendor>HIQ</vendor>
          <product>0x5002</product>
          <serial>0x0000001e</serial>
          <width>1280</width>
          <height>1024</height>
          <rate>60</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>yes</primary>
      </output>
      <output name="TV-0">
      </output>
      <output name="DVI-I-2">
          <vendor>SAM</vendor>
          <product>0x0485</product>
          <serial>0x434d3233</serial>
          <width>1920</width>
          <height>1080</height>
          <rate>60</rate>
          <x>1280</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>no</primary>
      </output>
      <output name="DVI-I-3">
      </output>
  </configuration>
</monitors>
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #34 : 14.01.16 - klo:13.15 »
Tällaista voisi kokeilla:

Koodia: [Valitse]
<monitors version="1">
  <configuration>
      <clone>no</clone>
      <output name="DVI-I-0">
          <vendor>HIQ</vendor>
          <product>0x5002</product>
          <serial>0x0000001e</serial>
          <width>1280</width>
          <height>1024</height>
          <rate>60</rate>
          <x>1920</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>yes</primary>
      </output>
      <output name="DVI-I-1">
      </output>
      <output name="TV-0">
      </output>
      <output name="DVI-I-2">
      </output>
      <output name="DVI-I-3">
          <vendor>SAM</vendor>
          <product>0x0485</product>
          <serial>0x434d3233</serial>
          <width>1920</width>
          <height>1080</height>
          <rate>60</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>no</primary>
      </output>
  </configuration>
</monitors>

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema
« Vastaus #35 : 14.01.16 - klo:13.49 »
nm - YOU DA MAN!!! Loggasin pihalle ja voilla, homma heti kuosissa kirjautumisesta lähtien. Kiitti!!!

JESHHH!!!

Tällaista voisi kokeilla:

Koodia: [Valitse]
<monitors version="1">
  <configuration>
      <clone>no</clone>
      <output name="DVI-I-0">
          <vendor>HIQ</vendor>
          <product>0x5002</product>
          <serial>0x0000001e</serial>
          <width>1280</width>
          <height>1024</height>
          <rate>60</rate>
          <x>1920</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>yes</primary>
      </output>
      <output name="DVI-I-1">
      </output>
      <output name="TV-0">
      </output>
      <output name="DVI-I-2">
      </output>
      <output name="DVI-I-3">
          <vendor>SAM</vendor>
          <product>0x0485</product>
          <serial>0x434d3233</serial>
          <width>1920</width>
          <height>1080</height>
          <rate>60</rate>
          <x>0</x>
          <y>0</y>
          <rotation>normal</rotation>
          <reflect_x>no</reflect_x>
          <reflect_y>no</reflect_y>
          <primary>no</primary>
      </output>
  </configuration>
</monitors>
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema [RATKAISTU]
« Vastaus #36 : 14.01.16 - klo:14.48 »
Otetaas vielä pikkasen asiaa pinnalle:

Mulla oli toi edellinen 17" näyttö pikkasen rikki (jotkin rivit välkkyi yms) ja päätin sit vaihtaa sen toiseen 17" näyttöön, eri merkki. Arvelinkii että saattaa asetukset hävitä.. Eli pikkasen pitäis vielä ihmetellä, tämmöisiä nämä detailit:
xrandr
Koodia: [Valitse]
Screen 0: minimum 8 x 8, current 3200 x 1080, maximum 8192 x 8192
DVI-I-0 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 340mm x 270mm
   1280x1024     60.02*+  75.02 
   1024x768      75.03    70.07    60.00 
   800x600       75.00    60.32 
   640x480       75.00    59.94 
DVI-I-1 disconnected (normal left inverted right x axis y axis)
TV-0 disconnected (normal left inverted right x axis y axis)
DVI-I-2 disconnected (normal left inverted right x axis y axis)
DVI-I-3 connected 1920x1080+1280+0 (normal left inverted right x axis y axis) 518mm x 32mm
   1920x1080     59.93*+
   1680x1050     59.95 
   1600x1200     60.00 
   1440x900      59.89 
   1280x1024     75.02    60.02 
   1280x960      60.00 
   1280x800      59.81 
   1152x864      75.00 
   1024x768      75.03    70.07    60.00 
   800x600       75.00    72.19    60.32    56.25 
   640x480       75.00    72.81    59.94
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema [RATKAISTU]
« Vastaus #37 : 14.01.16 - klo:14.51 »
Koodia: [Valitse]
[     6.710]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[     6.711] X Protocol Version 11, Revision 0
[     6.711] Build Operating System: Linux 3.13.0-68-generic x86_64 Ubuntu
[     6.711] Current Operating System: Linux urkkimasiina 4.2.0-23-generic #28-Ubuntu SMP Sun Dec 27 17:47:31 UTC 2015 x86_64
[     6.711] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-23-generic root=UUID=7c9c9c76-1b99-4d2e-a546-93e67f969248 ro quiet splash
[     6.711] Build Date: 12 November 2015  05:33:29PM
[     6.711] xorg-server 2:1.17.2-1ubuntu9.1 (For technical support please see http://www.ubuntu.com/support)
[     6.711] Current version of pixman: 0.32.6
[     6.711] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[     6.711] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.711] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 14 14:39:40 2016
[     6.711] (==) Using config file: "/etc/X11/xorg.conf"
[     6.711] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.711] (==) ServerLayout "Layout0"
[     6.711] (**) |-->Screen "Screen0" (0)
[     6.711] (**) |   |-->Monitor "Monitor0"
[     6.712] (**) |   |-->Device "Device0"
[     6.712] (**) |-->Input Device "Keyboard0"
[     6.712] (**) |-->Input Device "Mouse0"
[     6.712] (**) Option "Xinerama" "0"
[     6.712] (==) Automatically adding devices
[     6.712] (==) Automatically enabling devices
[     6.712] (==) Automatically adding GPU devices
[     6.712] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.712] Entry deleted from font path.
[     6.712] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     6.712] Entry deleted from font path.
[     6.712] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     6.712] Entry deleted from font path.
[     6.712] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     6.712] Entry deleted from font path.
[     6.712] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     6.712] Entry deleted from font path.
[     6.712] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[     6.712] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     6.712] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     6.712] (WW) Disabling Keyboard0
[     6.712] (WW) Disabling Mouse0
[     6.712] (II) Loader magic: 0x55c9ebf4cd40
[     6.712] (II) Module ABI versions:
[     6.712] X.Org ANSI C Emulation: 0.4
[     6.712] X.Org Video Driver: 19.0
[     6.712] X.Org XInput driver : 21.0
[     6.712] X.Org Server Extension : 9.0
[     6.712] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.713] (--) PCI:*(0:1:0:0) 10de:0191:1043:8233 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[     6.713] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     6.713] (II) "glx" will be loaded by default.
[     6.713] (II) LoadModule: "glx"
[     6.713] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     6.820] (II) Module glx: vendor="NVIDIA Corporation"
[     6.820] compiled for 4.0.2, module version = 1.0.0
[     6.820] Module class: X.Org Server Extension
[     6.820] (II) NVIDIA GLX Module  340.96  Sun Nov  8 22:06:18 PST 2015
[     6.820] (II) LoadModule: "nvidia"
[     6.820] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     6.820] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.820] compiled for 4.0.2, module version = 1.0.0
[     6.820] Module class: X.Org Video Driver
[     6.820] (II) NVIDIA dlloader X Driver  340.96  Sun Nov  8 21:46:28 PST 2015
[     6.820] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.820] (++) using VT number 7

[     6.824] (II) Loading sub module "fb"
[     6.824] (II) LoadModule: "fb"
[     6.824] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.824] (II) Module fb: vendor="X.Org Foundation"
[     6.824] compiled for 1.17.2, module version = 1.0.0
[     6.824] ABI class: X.Org ANSI C Emulation, version 0.4
[     6.824] (WW) Unresolved symbol: fbGetGCPrivateKey
[     6.824] (II) Loading sub module "wfb"
[     6.824] (II) LoadModule: "wfb"
[     6.824] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     6.824] (II) Module wfb: vendor="X.Org Foundation"
[     6.824] compiled for 1.17.2, module version = 1.0.0
[     6.824] ABI class: X.Org ANSI C Emulation, version 0.4
[     6.824] (II) Loading sub module "ramdac"
[     6.824] (II) LoadModule: "ramdac"
[     6.824] (II) Module "ramdac" already built-in
[     6.825] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     6.825] (==) NVIDIA(0): RGB weight 888
[     6.825] (==) NVIDIA(0): Default visual is TrueColor
[     6.825] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.825] (**) NVIDIA(0): Option "Stereo" "0"
[     6.825] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[     6.825] (**) NVIDIA(0): Option "SLI" "Off"
[     6.825] (**) NVIDIA(0): Option "MultiGPU" "Off"
[     6.825] (**) NVIDIA(0): Option "BaseMosaic" "off"
[     6.825] (**) NVIDIA(0): Stereo disabled by request
[     6.825] (**) NVIDIA(0): NVIDIA SLI disabled.
[     6.825] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[     6.825] (**) NVIDIA(0): Enabling 2D acceleration
[     7.763] (II) NVIDIA(0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[     7.763] (II) NVIDIA(0):     Vision stereo.
[     7.783] (II) NVIDIA(0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[     7.783] (II) NVIDIA(0):     3D Vision stereo.
[     7.783] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[     7.787] (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GTX (G80) at PCI:1:0:0 (GPU-0)
[     7.787] (--) NVIDIA(0): Memory: 786432 kBytes
[     7.787] (--) NVIDIA(0): VideoBIOS: 60.80.13.00.00
[     7.787] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     7.792] (--) NVIDIA(0): Valid display device(s) on GeForce 8800 GTX at PCI:1:0:0
[     7.792] (--) NVIDIA(0):     Acer AL1715 (CRT-0) (connected)
[     7.792] (--) NVIDIA(0):     CRT-1
[     7.792] (--) NVIDIA(0):     TV-0
[     7.792] (--) NVIDIA(0):     DFP-0
[     7.792] (--) NVIDIA(0):     Samsung SyncMaster (DFP-1) (boot, connected)
[     7.792] (--) NVIDIA(GPU-0): Acer AL1715 (CRT-0): 400.0 MHz maximum pixel clock
[     7.792] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[     7.792] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[     7.792] (--) NVIDIA(0): DFP-0: Internal TMDS
[     7.792] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[     7.792] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal TMDS
[     7.792] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-1): 330.0 MHz maximum pixel clock
[     7.792] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     7.793] (**) NVIDIA(0):     device Acer AL1715 (CRT-0) (Using EDID frequencies has
[     7.793] (**) NVIDIA(0):     been enabled on all display devices.)
[     7.793] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     7.793] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[     7.793] (**) NVIDIA(0):     has been enabled on all display devices.)
[     7.795] (==) NVIDIA(0):
[     7.795] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     7.795] (==) NVIDIA(0):     will be used as the requested mode.
[     7.795] (==) NVIDIA(0):
[     7.795] (II) NVIDIA(0): Validated MetaModes:
[     7.795] (II) NVIDIA(0):     "DFP-1:nvidia-auto-select,CRT-0:nvidia-auto-select"
[     7.795] (II) NVIDIA(0): Virtual screen size determined to be 3200 x 1080
[     7.831] (--) NVIDIA(0): DPI set to (93, 85); computed from "UseEdidDpi" X config
[     7.831] (--) NVIDIA(0):     option
[     7.831] (--) Depth 24 pixmap format is 32 bpp
[     7.831] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[     7.839] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select,CRT-0:nvidia-auto-select"
[     7.931] (==) NVIDIA(0): Disabling shared memory pixmaps
[     7.931] (==) NVIDIA(0): Backing store enabled
[     7.931] (==) NVIDIA(0): Silken mouse enabled
[     7.931] (**) NVIDIA(0): DPMS enabled
[     7.931] (II) Loading sub module "dri2"
[     7.931] (II) LoadModule: "dri2"
[     7.931] (II) Module "dri2" already built-in
[     7.931] (II) NVIDIA(0): [DRI2] Setup complete
[     7.931] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     7.931] (--) RandR disabled
[     7.935] (II) SELinux: Disabled on system
[     7.936] (II) Initializing extension GLX
[     7.936] (II) Indirect GLX disabled.(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[     7.959] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     7.959] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.959] (II) LoadModule: "evdev"
[     7.959] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.962] (II) Module evdev: vendor="X.Org Foundation"
[     7.962] compiled for 1.17.1, module version = 2.9.2
[     7.962] Module class: X.Org XInput Driver
[     7.962] ABI class: X.Org XInput driver, version 21.0
[     7.962] (II) Using input driver 'evdev' for 'Power Button'
[     7.962] (**) Power Button: always reports core events
[     7.962] (**) evdev: Power Button: Device: "/dev/input/event1"
[     7.962] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.962] (--) evdev: Power Button: Found keys
[     7.962] (II) evdev: Power Button: Configuring as keyboard
[     7.962] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     7.962] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.962] (**) Option "xkb_rules" "evdev"
[     7.962] (**) Option "xkb_model" "pc105"
[     7.962] (**) Option "xkb_layout" "fi"
[     7.963] (II) XKB: reuse xkmfile /var/lib/xkb/server-F30D752BAEAAD4B8C79BE2C421539A0D3700902C.xkm
[     7.964] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     7.964] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.964] (II) Using input driver 'evdev' for 'Power Button'
[     7.964] (**) Power Button: always reports core events
[     7.964] (**) evdev: Power Button: Device: "/dev/input/event0"
[     7.964] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.964] (--) evdev: Power Button: Found keys
[     7.964] (II) evdev: Power Button: Configuring as keyboard
[     7.964] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     7.964] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     7.964] (**) Option "xkb_rules" "evdev"
[     7.964] (**) Option "xkb_model" "pc105"
[     7.964] (**) Option "xkb_layout" "fi"
[     7.967] (II) No input driver specified, ignoring this device.
[     7.967] (II) This device may have been added with another device file.
[     7.967] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event2)
[     7.967] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[     7.967] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[     7.967] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[     7.967] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event2"
[     7.967] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[     7.967] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[     7.967] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[     7.967] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0518:0001.0001/input/input5/event2"
[     7.967] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 8)
[     7.967] (**) Option "xkb_rules" "evdev"
[     7.967] (**) Option "xkb_model" "pc105"
[     7.967] (**) Option "xkb_layout" "fi"
[     7.968] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event3)
[     7.968] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[     7.968] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[     7.968] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[     7.968] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/0003:0518:0001.0002/input/input6/event3"
[     7.968] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 9)
[     7.968] (**) Option "xkb_rules" "evdev"
[     7.968] (**) Option "xkb_model" "pc105"
[     7.968] (**) Option "xkb_layout" "fi"
[     7.968] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: initialized for relative axes.
[     7.969] (WW) evdev: Plus More Enterprise LTD. USB-compliant keyboard: ignoring absolute axes.
[     7.969] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) keeping acceleration scheme 1
[     7.969] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration profile 0
[     7.969] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration factor: 2.000
[     7.969] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration threshold: 4
[     7.969] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/mouse0)
[     7.969] (II) No input driver specified, ignoring this device.
[     7.969] (II) This device may have been added with another device file.
[     7.969] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
[     7.969] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[     7.969] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[     7.969] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[     7.970] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.970] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[     7.970] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 10)
[     7.970] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[     7.970] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[     7.970] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[     7.970] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[     7.970] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[     7.970] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse1)
[     7.970] (II) No input driver specified, ignoring this device.
[     7.970] (II) This device may have been added with another device file.
[     8.704] (II) NVIDIA(GPU-0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[     8.704] (II) NVIDIA(GPU-0):     Vision stereo.
[     8.724] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[     8.724] (II) NVIDIA(GPU-0):     3D Vision stereo.
[     9.116] (II) NVIDIA(0): Setting mode "DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[     9.318] (II) NVIDIA(0): Setting mode "DVI-I-3: nvidia-auto-select @1920x1080 +1280+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, DVI-I-0: nvidia-auto-select @1280x1024 +0+0 {ViewPortIn=1280x1024, ViewPortOut=1280x1024+0+0}"
[     9.632] (II) NVIDIA(GPU-0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[     9.632] (II) NVIDIA(GPU-0):     Vision stereo.
[     9.652] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[     9.652] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    15.949] (II) NVIDIA(GPU-0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[    15.949] (II) NVIDIA(GPU-0):     Vision stereo.
[    15.970] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    15.970] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    16.080] (II) NVIDIA(GPU-0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[    16.080] (II) NVIDIA(GPU-0):     Vision stereo.
[    16.101] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    16.101] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    16.361] (II) XKB: reuse xkmfile /var/lib/xkb/server-F30D752BAEAAD4B8C79BE2C421539A0D3700902C.xkm
[    16.914] (II) NVIDIA(GPU-0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[    16.914] (II) NVIDIA(GPU-0):     Vision stereo.
[    16.936] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    16.936] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    17.516] (II) XKB: reuse xkmfile /var/lib/xkb/server-DEB504F027C6721080600CA3929E96BB3BF47290.xkm
[    17.610] (II) XKB: reuse xkmfile /var/lib/xkb/server-DEB504F027C6721080600CA3929E96BB3BF47290.xkm
[    18.615] (II) XKB: reuse xkmfile /var/lib/xkb/server-49B968D92CE2B9A6B0892106F2871607A6B556B5.xkm
[    32.591] (II) NVIDIA(GPU-0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[    32.591] (II) NVIDIA(GPU-0):     Vision stereo.
[    32.611] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    32.611] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    32.708] (II) NVIDIA(GPU-0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[    32.708] (II) NVIDIA(GPU-0):     Vision stereo.
[    32.728] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    32.728] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    32.841] (II) NVIDIA(GPU-0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[    32.841] (II) NVIDIA(GPU-0):     Vision stereo.
[    32.862] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[    32.862] (II) NVIDIA(GPU-0):     3D Vision stereo.
[   219.899] (II) NVIDIA(GPU-0): Display (Acer AL1715 (CRT-0)) does not support NVIDIA 3D
[   219.899] (II) NVIDIA(GPU-0):     Vision stereo.
[   219.919] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[   219.919] (II) NVIDIA(GPU-0):     3D Vision stereo.
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema [RATKAISTU]
« Vastaus #38 : 14.01.16 - klo:16.32 »
Otetaas vielä pikkasen asiaa pinnalle:

Mulla oli toi edellinen 17" näyttö pikkasen rikki (jotkin rivit välkkyi yms) ja päätin sit vaihtaa sen toiseen 17" näyttöön, eri merkki. Arvelinkii että saattaa asetukset hävitä..

monitors.xml:ssä on määritelty kunkin näytön kohdalla valmistaja (vendor) tuote (product) ja sarjanumero (serial). Konfiguraatio otetaan käyttöön vain, jos ne täsmäävät porttiin kytketyn näytön kanssa. Samassa tiedostossa voi myös määritellä useita vaihtoehtoisia konfiguraatioita, joista valitaan käyttöön se, joka täsmää kytkettyihin näyttöihin ja portteihin.

Edellisen näytön tunnisterivit olivat siis:

Koodia: [Valitse]
         <vendor>HIQ</vendor>
          <product>0x5002</product>
          <serial>0x0000001e</serial>

Uudelle näytölle varmaankin ilmaantuu uusi konfiguraatio-osio monitors.xml:ään automaattisesti tai sen jälkeen kun käyt Ubuntun näyttöasetuksissa. Voit sitten kopioida nuo tunnisteet vanhaan toimivaan konfiguraatioon.

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: GeForce 8800 GTX ja tuplanäytöllinen probleema [RATKAISTU]
« Vastaus #39 : 14.01.16 - klo:16.50 »
Otetaas vielä pikkasen asiaa pinnalle:

Mulla oli toi edellinen 17" näyttö pikkasen rikki (jotkin rivit välkkyi yms) ja päätin sit vaihtaa sen toiseen 17" näyttöön, eri merkki. Arvelinkii että saattaa asetukset hävitä..

monitors.xml:ssä on määritelty kunkin näytön kohdalla valmistaja (vendor) tuote (product) ja sarjanumero (serial). Konfiguraatio otetaan käyttöön vain, jos ne täsmäävät porttiin kytketyn näytön kanssa. Samassa tiedostossa voi myös määritellä useita vaihtoehtoisia konfiguraatioita, joista valitaan käyttöön se, joka täsmää kytkettyihin näyttöihin ja portteihin.

Edellisen näytön tunnisterivit olivat siis:

Koodia: [Valitse]
         <vendor>HIQ</vendor>
          <product>0x5002</product>
          <serial>0x0000001e</serial>

Uudelle näytölle varmaankin ilmaantuu uusi konfiguraatio-osio monitors.xml:ään automaattisesti tai sen jälkeen kun käyt Ubuntun näyttöasetuksissa. Voit sitten kopioida nuo tunnisteet vanhaan toimivaan konfiguraatioon.

Ok, pittääpä myöhemmin kokkeilla!
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb