Kirjoittaja Aihe: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)  (Luettu 6066 kertaa)

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Muuten homma käy ja lana levittää mutta kun kone on ollu joitain tunteja päällä niin wlan tipahtaa pelistä poies, lankaverkko toimii sit vielä. Tai oon kokeillu tipahtamisen jälkeen pelkästään tehteringiä USB:llä samsungin luurista mutta se ainakin toimii, vaikka kokeilin
Koodia: [Valitse]
sudo systemctl restart NetworkManager.serviceniin Wifi networks ilmoittaa että device not ready.

Eli wlan on toi
Koodia: [Valitse]
04:00.0 Network controller: Ralink corp. RT2790 Wireless 802.11n 1T/2R PCIe
Kun koneen käynnistää uusiks niin wifi toimii sen jälkeen taasen normaalisti. Mitteehän ihmettä..
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

Tomin

  • Palvelimen ylläpitäjä
  • Käyttäjä / moderaattori+
  • Viestejä: 11433
    • Profiili
    • Tomin kotisivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #1 : 22.08.15 - klo:23.28 »
Tuleeko dmesg:iin jotain virheitä silloin kun wlan lakkaa toimimasta? Eli ovatko viimeiset rivit dmesg komennon tulosteessa jotain virheilmoituksia? Itselläni on Intelin wlan ja joskus harvoin sattuu sellainen tukiasema, jonka kanssa tuo lakkaa pelittämästä. Ei nyt ole esimerkkiä virhetulosteesta, mutta ehkä kymmenisen riviä se jotain sinne kirjoittelee. Ja tosiaan sinne dmesg:n lokiin menee kaikkiea mahdollista, joten ei kannata tuijottaa ihan pelkästään muutamaa viimeistä riviä (vasemmalla on sekuntilaskuri, josta voi arvioida ajan kulumista viestien välillä).
Automaattinen allekirjoitus:
Lisäisitkö [RATKAISTU] ketjun ensimmäisen viestin aiheeseen ongelman ratkettua, kiitos.

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #2 : 23.08.15 - klo:00.00 »
Ei auta muu kuin ottaa seuraavalla kerralla heti dmesgista matskut pihalle, nyt ei kerro mitään järkevää
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

raimo

  • Käyttäjä
  • Viestejä: 4155
  • openSUSE Tumbleweed
    • Profiili
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #3 : 23.08.15 - klo:00.08 »
Ei auta muu kuin ottaa seuraavalla kerralla heti dmesgista matskut pihalle, nyt ei kerro mitään järkevää

Sitä odotellessa voitais tarkastella
Koodia: [Valitse]
iwconfigtulostetta...
Tietä käyden tien on vanki. Vapaa on vain umpihanki.
Aaro Hellaakoski

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #4 : 23.08.15 - klo:00.44 »
Koodia: [Valitse]
eth1      no wireless extensions.

usb0      no wireless extensions.

lo        no wireless extensions.

wlan1     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #5 : 23.08.15 - klo:00.45 »
Muillakin on ollut ratkaisemattomia ongelmia tuon piirin kanssa: http://ubuntuforums.org/showthread.php?t=2222909

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #6 : 23.08.15 - klo:01.05 »
Mulla on nyt 15.04 64bit ja ei oo muita ongelmia kuin notta monen tunnin jälkeen saattaa tipahtaa, ei ees tipahda joka päivä. Aiemmissa jakeluissa oli hitausongelmaa yms kaikkea epäherkkua mitä tuossa lontoonkielisessä foorumissa ilmoteltiin.
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #7 : 23.08.15 - klo:01.52 »
Ongelman ilmetessä voisit kokeilla poistaa ajurimoduulin kernelistä ja ladata sen uudelleen:

Koodia: [Valitse]
sudo modprobe -r rt2800pci

Koodia: [Valitse]
sudo modprobe rt2800pci
Moduulin parametria nohwcrypt=1 voisi myös kokeilla.
« Viimeksi muokattu: 23.08.15 - klo:01.54 kirjoittanut nm »

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #8 : 23.08.15 - klo:11.01 »
Joo kokeilen tota modprobea seuraavan kerran! Mites tota cryptia käytetään?
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

Tomin

  • Palvelimen ylläpitäjä
  • Käyttäjä / moderaattori+
  • Viestejä: 11433
    • Profiili
    • Tomin kotisivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #9 : 23.08.15 - klo:11.33 »
Laittamalla sen ladatessa moduulin perään:
Koodia: [Valitse]
sudo modprobe rt2800pci nohwcrypt=1ja jos tuo toimii, niin sitten pysyväksi:
Koodia: [Valitse]
gksudo gedit /etc/modprobe.d/rt2800pci.confSinne rivi:
Koodia: [Valitse]
options rt2800pci nohwcrypt=1Tallennus ja sen jälkeen tuo on aina ladatessa käytössä. Tiedostonimi voi olla muutakin, mutta olennaista on, että se päättyy '.conf'.
Automaattinen allekirjoitus:
Lisäisitkö [RATKAISTU] ketjun ensimmäisen viestin aiheeseen ongelman ratkettua, kiitos.

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #10 : 02.09.15 - klo:22.44 »
No niin, nyt tipahti yhteys. Kokeilin tota nm:n modprobe-hommelia, ei auttanut. Edelleen ilmoittaa että device not ready.

dmesg kertoo tämmöistä (näytti olevan about olennaisimmat)
Koodia: [Valitse]
[15366.060630] wlan1: authenticate with b0:5b:67:25:96:38
[15366.075794] wlan1: send auth to b0:5b:67:25:96:38 (try 1/3)
[15366.077286] wlan1: authenticated
[15366.079701] wlan1: associate with b0:5b:67:25:96:38 (try 1/3)
[15366.083023] wlan1: RX AssocResp from b0:5b:67:25:96:38 (capab=0x411 status=0 aid=2)
[15366.083090] wlan1: associated
[15421.941606] cfg80211: Calling CRDA to update world regulatory domain
[15421.945640] cfg80211: World regulatory domain updated:
[15421.945643] cfg80211:  DFS Master region: unset
[15421.945645] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[15421.945648] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[15421.945651] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[15421.945653] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[15421.945656] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[15421.945659] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[15421.945662] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[15421.945664] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[15421.945666] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[15423.091544] wlan1: authenticate with b0:5b:67:25:96:38
[15423.106531] wlan1: send auth to b0:5b:67:25:96:38 (try 1/3)
[15423.108237] wlan1: authenticated
[15423.110472] wlan1: associate with b0:5b:67:25:96:38 (try 1/3)
[15423.113817] wlan1: RX AssocResp from b0:5b:67:25:96:38 (capab=0x411 status=0 aid=2)
[15423.113905] wlan1: associated
[15564.762359] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15564.922546] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15564.942831] cfg80211: Calling CRDA to update world regulatory domain
[15564.946429] cfg80211: World regulatory domain updated:
[15564.946434] cfg80211:  DFS Master region: unset
[15564.946436] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[15564.946441] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[15564.946444] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[15564.946447] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[15564.946451] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[15564.946455] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[15564.946458] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[15564.946461] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[15564.946464] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[15565.182875] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15565.343069] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15565.503287] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15565.663302] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15566.884695] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15567.044920] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15571.882267] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15572.042396] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15572.202535] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15572.362789] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15573.584129] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15573.744255] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15578.585550] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15578.745807] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15578.905923] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15579.066100] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15580.287380] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15580.447662] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15580.611777] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15580.772039] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15580.932134] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15581.096410] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15582.317775] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15582.477925] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15583.434952] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15583.595115] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15583.755327] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15583.915523] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15585.136814] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15585.296999] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15606.464420] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15606.624490] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15606.784590] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15606.944873] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[15608.166201] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[15608.326367] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush

iwconfig kertoo tämmöistä
Koodia: [Valitse]
eth1      no wireless extensions.

usb0      no wireless extensions.

lo        no wireless extensions.

wlan1     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

Edelleen otin yhteyden Samsungin luurista usb-piuhalla niin netti kyllä toimii sitä kautta, eli wlanissa selvää problematiikkaa!
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

Tomin

  • Palvelimen ylläpitäjä
  • Käyttäjä / moderaattori+
  • Viestejä: 11433
    • Profiili
    • Tomin kotisivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #11 : 02.09.15 - klo:23.01 »
Tuolla virheilmoituksella löytyy paljon kommentteja. Alla linkki bugiin tuosta ja nimenomaan kommenttiin, jossa ehdotetaan miten NetworkManagerin saa estettyä etsimästä tukiasemaa aina välillä, jolloin tuota ei pitäisi sattua:
https://bugzilla.kernel.org/show_bug.cgi?id=61621#c44

Toinen juttu on, että mitkähän Ubuntun ja Linuxin versiot ovat käytössä?
Koodia: [Valitse]
lsb_release -a
uname -r
Uudempaa ydintä (siis Linuxia) voisi kokeilla. Jos et vielä aja 14.04:ää tai 15.04:ttä, niin sitten Ubuntun voisi päivittää, mutta jos ajat jo toista noista, niin ytimen voisi päivittää erikseen.

Pari Launchpadin bugiraporttia, mutta eivät mitenkään merkittäviä:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1443924
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1239814
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1318837
Noihin voi toki aina tökkiä, että "affects me too" tuolta ylhäältä, mutta tässä tapauksessa taitaisi pitää tehdä uusi, jos haluaa tulla huomatuksi.
Automaattinen allekirjoitus:
Lisäisitkö [RATKAISTU] ketjun ensimmäisen viestin aiheeseen ongelman ratkettua, kiitos.

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #12 : 02.09.15 - klo:23.21 »
Koodia: [Valitse]
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 15.04
Release: 15.04
Codename: vivid

Koodia: [Valitse]
3.19.0-26-generic
64-bittinen synsteemi. Pitääpä käydä mulkoilemassa tuota bugzillan linkkiä.

EDIT: Oon just pistelemässä myllyä kiinni ja nyt ei näy tota Access Pointin mac:ia, mut huomenissa kun käynnistelen niin kokeilen tota kikkaa. Tiedä vaikka korjaantuis.

EDIT2: No nyt tein ton kikkaviitosen ton BSSID:n suhteen, katellaan tipahtaako vielä.
« Viimeksi muokattu: 03.09.15 - klo:06.18 kirjoittanut uhappo »
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #13 : 18.09.15 - klo:18.48 »
Tipahti taas, dmesg:

Koodia: [Valitse]
[ 3017.308406] cfg80211: World regulatory domain updated:
[ 3017.308411] cfg80211:  DFS Master region: unset
[ 3017.308413] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3017.308418] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3017.308422] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3017.308425] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3017.308429] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3017.308433] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3017.308437] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3017.308440] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3017.308443] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3018.426179] wlan1: authenticate with b0:5b:67:25:96:38
[ 3018.441667] wlan1: send auth to b0:5b:67:25:96:38 (try 1/3)
[ 3018.443365] wlan1: authenticated
[ 3018.445549] wlan1: associate with b0:5b:67:25:96:38 (try 1/3)
[ 3018.448891] wlan1: RX AssocResp from b0:5b:67:25:96:38 (capab=0x411 status=0 aid=1)
[ 3018.448968] wlan1: associated
[ 3074.360036] cfg80211: Calling CRDA to update world regulatory domain
[ 3074.364091] cfg80211: World regulatory domain updated:
[ 3074.364096] cfg80211:  DFS Master region: unset
[ 3074.364098] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3074.364103] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3074.364106] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3074.364110] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3074.364114] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3074.364118] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3074.364122] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3074.364125] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3074.364128] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3075.489686] wlan1: authenticate with b0:5b:67:25:96:38
[ 3075.505034] wlan1: send auth to b0:5b:67:25:96:38 (try 1/3)
[ 3075.506731] wlan1: authenticated
[ 3075.508871] wlan1: associate with b0:5b:67:25:96:38 (try 1/3)
[ 3075.513244] wlan1: RX AssocResp from b0:5b:67:25:96:38 (capab=0x411 status=0 aid=1)
[ 3075.513320] wlan1: associated
[ 3190.477248] cfg80211: Calling CRDA to update world regulatory domain
[ 3190.481335] cfg80211: World regulatory domain updated:
[ 3190.481340] cfg80211:  DFS Master region: unset
[ 3190.481343] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3190.481347] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3190.481351] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3190.481355] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3190.481359] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3190.481363] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3190.481367] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3190.481370] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3190.481373] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3191.622802] wlan1: authenticate with b0:5b:67:25:96:38
[ 3191.638108] wlan1: send auth to b0:5b:67:25:96:38 (try 1/3)
[ 3191.640559] wlan1: authenticated
[ 3191.642038] wlan1: associate with b0:5b:67:25:96:38 (try 1/3)
[ 3191.645395] wlan1: RX AssocResp from b0:5b:67:25:96:38 (capab=0x411 status=0 aid=1)
[ 3191.645471] wlan1: associated
[ 3305.625069] cfg80211: Calling CRDA to update world regulatory domain
[ 3305.629067] cfg80211: World regulatory domain updated:
[ 3305.629071] cfg80211:  DFS Master region: unset
[ 3305.629073] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3305.629077] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3305.629080] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3305.629083] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3305.629086] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3305.629090] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3305.629093] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3305.629095] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3305.629098] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3306.754787] wlan1: authenticate with b0:5b:67:25:96:38
[ 3306.770021] wlan1: send auth to b0:5b:67:25:96:38 (try 1/3)
[ 3306.771629] wlan1: authenticated
[ 3306.773960] wlan1: associate with b0:5b:67:25:96:38 (try 1/3)
[ 3306.777297] wlan1: RX AssocResp from b0:5b:67:25:96:38 (capab=0x411 status=0 aid=1)
[ 3306.777374] wlan1: associated
[ 3477.435535] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3477.595713] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3477.624282] cfg80211: Calling CRDA to update world regulatory domain
[ 3477.628552] cfg80211: World regulatory domain updated:
[ 3477.628557] cfg80211:  DFS Master region: unset
[ 3477.628560] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3477.628564] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3477.628568] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3477.628572] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3477.628576] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3477.628580] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3477.628584] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3477.628587] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3477.628590] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3477.856033] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3478.016190] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3478.176369] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3478.336587] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3479.557918] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3479.718078] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3484.555494] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3484.715596] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3484.875867] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3485.036039] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3486.261428] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3486.421587] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3491.262858] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3491.423185] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3491.583276] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3491.743473] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3492.964809] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3493.124960] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3493.305195] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3493.465395] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3493.625576] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3493.785733] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3495.007061] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3495.167193] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3496.164329] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3496.324524] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3496.484716] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3496.644869] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3497.866295] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3498.026450] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3519.202022] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3519.362087] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3519.522269] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3519.682546] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3520.903880] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3521.068050] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3522.912157] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 3523.070313] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[ 3523.230426] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[ 3523.230824] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 3538.240389] r8169 0000:02:00.0 eth1: link down
[ 3539.857012] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3541.458744] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3541.458753] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3543.076533] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3544.678281] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3544.678290] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3546.304126] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3547.905914] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3547.905923] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3549.523608] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3551.125439] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3551.125448] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3552.743292] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3554.345034] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3554.345040] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3555.970797] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3557.572638] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3557.572647] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3559.190443] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3560.792235] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3560.792244] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3562.409974] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3564.011755] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3564.011765] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3565.629596] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3567.231374] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3567.231384] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3567.443552] usb 2-1.2: new high-speed USB device number 5 using ehci-pci
[ 3567.538094] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6860
[ 3567.538100] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3567.538104] usb 2-1.2: Product: SAMSUNG_Android
[ 3567.538108] usb 2-1.2: Manufacturer: SAMSUNG
[ 3567.538111] usb 2-1.2: SerialNumber: 02157df2902b6914
[ 3568.849258] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3570.450955] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3570.450964] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3572.076763] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3573.678489] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3573.678498] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3575.296258] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3576.898131] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3576.898140] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3578.516010] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3580.117741] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3580.117750] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3581.735435] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3583.341273] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3583.341282] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3584.159079] usb 2-1.2: USB disconnect, device number 5
[ 3584.358358] usb 2-1.2: new high-speed USB device number 6 using ehci-pci
[ 3584.451857] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=6863
[ 3584.451864] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3584.451868] usb 2-1.2: Product: SAMSUNG_Android
[ 3584.451871] usb 2-1.2: Manufacturer: SAMSUNG
[ 3584.451875] usb 2-1.2: SerialNumber: 02157df2902b6914
[ 3584.463716] usbcore: registered new interface driver cdc_ether
[ 3584.959082] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3586.560829] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3586.560839] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3586.561257] rndis_host 2-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.2, RNDIS device, 02:52:36:35:35:36
[ 3586.561418] usbcore: registered new interface driver rndis_host
[ 3588.178665] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3589.784395] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3589.784404] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3591.414231] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3593.019908] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3593.019913] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3594.645849] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3594.756415] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3596.251566] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3596.251575] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3597.877446] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3599.483259] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3599.483268] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3601.108903] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3602.714717] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3602.714725] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3604.336651] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3605.938356] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3605.938364] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3607.568175] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3609.169884] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3609.169895] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3610.791809] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3612.393521] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3612.393530] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3614.015380] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3615.617132] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[ 3615.617141] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 3617.234928] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb

uhappo

  • Käyttäjä
  • Viestejä: 1029
  • Sissos
    • Profiili
    • Urkin sivut
Vs: WLAN tipahtaa ajoittain pelistä (Ralink corp. RT2790)
« Vastaus #14 : 29.09.15 - klo:19.55 »
Taas..

Koodia: [Valitse]
[11890.826363] cfg80211: Calling CRDA to update world regulatory domain
[11890.830516] cfg80211: World regulatory domain updated:
[11890.830521] cfg80211:  DFS Master region: unset
[11890.830523] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[11890.830527] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[11890.830531] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[11890.830534] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[11890.830537] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[11890.830541] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[11890.830545] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[11890.830548] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[11890.830551] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[11891.078320] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11891.242543] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11891.402717] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11891.562915] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11892.788134] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11892.948299] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11897.785594] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11897.945856] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11898.105997] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11898.266101] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11899.487530] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11899.647659] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11904.488996] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11904.649191] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11904.813463] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11904.973522] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11906.198788] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11906.363005] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11906.535216] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11906.699382] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11906.859594] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11907.019710] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11908.241119] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11908.401226] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11909.390428] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11909.554595] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11909.714703] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11909.874842] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11911.100292] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11911.260370] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11932.427600] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11932.587788] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11932.748001] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11932.908062] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11934.129451] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11934.289641] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11938.346062] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[11938.506190] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[11941.789847] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[11943.395605] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[11943.395614] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[11945.017454] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[11946.619082] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x0000006a]
[11946.619088] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
HP i7-pohjainen desktop ja itsekasattu i7-pohjainen desktop, uusin ubuntu 64bit
Ubuntu since 2008 Feb