Kirjoittaja Aihe: miten tämä ohjelman asennus menee? [ RATKAISTU ]  (Luettu 3143 kertaa)

antti20121

  • Käyttäjä
  • Viestejä: 86
    • Profiili
Moi,

Mulla on periaatteessa selvät ohjeet mutta alku ei ilmeisesti mene oikein, koska kirjoittaessa terminaaliin esim. install renoise, terminaali ilmoittaa no such file.

Miten tuo esim. renoise pitäisi ensin tallentaa koneelle eli sinne home kansioon ?

Sama muissakin ohjelmissa, aina mulle tulee ilmoitus no such file.

Kiitos.
« Viimeksi muokattu: 12.10.12 - klo:15.21 kirjoittanut antti20121 »

Tempo

  • Käyttäjä
  • Viestejä: 753
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #1 : 12.10.12 - klo:10.23 »
Moi,

Mulla on periaatteessa selvät ohjeet mutta alku ei ilmeisesti mene oikein, koska kirjoittaessa terminaaliin esim. install renoise, terminaali ilmoittaa no such file.

Miten tuo esim. renoise pitäisi ensin tallentaa koneelle eli sinne home kansioon ?

Sama muissakin ohjelmissa, aina mulle tulee ilmoitus no such file.

Kiitos.

Mitäköhän ohjelmaa olet asentamassa?  Netistä jotain?
Läppäri aikakausi alkaa olla lopuillaan. (lopen kyllästynyt läppäreihin)
Fujitsu siemens E5925 EPA, Intel core 2 duo, 8 G ram, SSD, yms yms......

Ja linkki pääte ohjeisiin-------->http://forum.ubuntu-fi.org/index.php?topic=32091.msg282369#msg2823

Tempo

  • Käyttäjä
  • Viestejä: 753
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #2 : 12.10.12 - klo:10.27 »
Tätäkö tarkoitat?

http://www.renoise.com/

Tuo ladattava tiedosto on  tar.bz2  eli joku taitavampi saa avustaa sen asennuksessa sua.   Tuon asentaminen ei onnistu niin että kirjoittaa päätteeseen "install renoise"
Läppäri aikakausi alkaa olla lopuillaan. (lopen kyllästynyt läppäreihin)
Fujitsu siemens E5925 EPA, Intel core 2 duo, 8 G ram, SSD, yms yms......

Ja linkki pääte ohjeisiin-------->http://forum.ubuntu-fi.org/index.php?topic=32091.msg282369#msg2823

Tempo

  • Käyttäjä
  • Viestejä: 753
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #3 : 12.10.12 - klo:10.49 »
Löysin tällaisen asennusohjeen tuohon ohjelmaan...... (mulle hepreaa)



Lainaus
Renoise for Linux has the following dependencies:

GCC 4.X libs, X.org 7.1+, preferably real-time kernel

libstdc++6 – GNU Standard C++ Library 4.2 or newer
X.org 7.1 – X Windows System 7.1 or newer
libasound2 – ALSA library 1.0 or newer
Note that when running on a 64-bit Linux environment, 32-bit compatible equivalents of the above dependencies should be installed

Renoise Single User Installation

This procedure will install Renoise for Linux in a directory under the user home. At the end of this procedure you’ll get a Single User Installation of Renoise.First of all download Renoise in a directory where you have read/write access (your home directory “~” should be a good place - the example below assumes that you save the archive in your home directory). When you have the Renoise archive open a terminal and type the following commands:

$ cd
[enter]
$ tar xvf rns_x_y_z_reg.tar.gz
[enter]
Once the decompression ended the rns_x_y_z directory has been created. Let’s go in it:

$ cd rns_x_y_z_reg
[enter]
We are ready to try running Renoise:

$ ./renoise
[enter]
Now the Renoise splash screen should pop up while the terminal is filled of log messages (nothing bad, it is all correct). If this is not what happened see the troubleshooting section.

Renoise System-Wide Installation

This procedure will install Renoise for Linux system-wide so all the users of your system can use it.First of all download Renoise in a directory where you have read/write access (your home directory “~” should be fine - the example below assumes that you save the archive in your home directory).When you have the Renoise archive open a terminal and type the following commands:

$ cd
[enter]
$ tar xvf rns_x_y_z_reg.tar.gz
[enter]
Once the decompression ended the rns_x_y_z directory has been created. Let’s go in it:

$ cd rns_x_y_z
[enter]
To install Renoise system-wide you should use the script provided: they are stored in the decompressed Renoise installation.Attention! To complete the system-wide installation you must have root privileges.Here is what to do if you use sudo (that the way to follow for Ubuntu users and users of distros derived from Ubuntu):

# sudo sh install.sh
[enter]
the system asks for your user password (the one you use to log into the system): enter it!

Some message about what the install script is doing are displayed. When the script end it display if the installation was successful (if not see the troubleshooting section).We are ready to try running Renoise:

$ renoise
[enter]
Now the Renoise splash screen should pop up while the terminal is filled of log messages (nothing bad, it is all correct). If this is not what happened see the troubleshooting section.
Läppäri aikakausi alkaa olla lopuillaan. (lopen kyllästynyt läppäreihin)
Fujitsu siemens E5925 EPA, Intel core 2 duo, 8 G ram, SSD, yms yms......

Ja linkki pääte ohjeisiin-------->http://forum.ubuntu-fi.org/index.php?topic=32091.msg282369#msg2823

Tempo

  • Käyttäjä
  • Viestejä: 753
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #4 : 12.10.12 - klo:10.50 »
Tässä vielä linkki noihin ohjeisiin


http://tutorials.renoise.com/wiki/Linux_FAQ
Läppäri aikakausi alkaa olla lopuillaan. (lopen kyllästynyt läppäreihin)
Fujitsu siemens E5925 EPA, Intel core 2 duo, 8 G ram, SSD, yms yms......

Ja linkki pääte ohjeisiin-------->http://forum.ubuntu-fi.org/index.php?topic=32091.msg282369#msg2823

antti20121

  • Käyttäjä
  • Viestejä: 86
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #5 : 12.10.12 - klo:11.53 »
First of all download Renoise in a directory where you have read/write access (your home directory “~” should be fine - the example below assumes that you save the archive in your home directory).

Eli mun käsittääkseni ongelmani on tuo yllä oleva lause, kuinka jotain ladataan " ...download Renoise in a directory..."
"... save the archive in your home directory..."

Osaan vain kopioida sen kotikansioon ja se ei ilmeisestikään riitä.

matsukan

  • Käyttäjä
  • Viestejä: 2148
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #6 : 12.10.12 - klo:12.30 »
open terminal

Koodia: [Valitse]
cd
mkdir test
wget http://files.renoise.com/demo/archive/Renoise_2_8_0_Demo_x86.tar.bz2
tai

Koodia: [Valitse]
wget http://files.renoise.com/demo/archive/Renoise_2_8_0_Demo_x86_64.tar.bz2
tai sitten voit ladata sen täältä (kait tarkoitit demoja?)

http://www.renoise.com/archived-renoise-demos

tai täältä :

http://www.renoise.com/demo
Pohjois-pohjanmaa
-- motto:  backupin tarve huomataan aina liian myöhään

welmar

  • Käyttäjä
  • Viestejä: 1582
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #7 : 12.10.12 - klo:13.19 »
Miten tuo esim. renoise pitäisi ensin tallentaa koneelle eli sinne home kansioon ?

Sama muissakin ohjelmissa, aina mulle tulee ilmoitus no such file.

Kiitos.
Mitä muita ohjelmia olet kokeillut? Oletko yrittänyt asentaa pakettivarastosta esim ardouria http://ardour.org/ ? Linuxissa aina ensin kannattaa etsiä pakettivarastosta joko itse ohjelmaa tai vastaavaa ennenkuin alkaa latailemaan tar-paketteja. Vaikka en tunne tunne renoisea mutta eikö toi ardour olisi aika vastaava? ainakin asennus onnistuisi yksinkertaisesti software centeristä tai päätteessä
Koodia: [Valitse]
sudo apt-get install ardour

antti20121

  • Käyttäjä
  • Viestejä: 86
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #8 : 12.10.12 - klo:15.03 »
Tiedostot on jo  ( rns_2_7_2_reg_x86.tar.gz ) koneella ja pystyn käyttämään Renoisea koska klikkailin ne allow executing as program, mutten osaa asentaa ( system wide installation ) koska en tiedä kuinka tiedostot ladataan kotikansioon eli ns. ensimmäinen askel asentamisessa on suorittamatta ja kun seuraan asennus ohjeita tulee ilmoitus "no such file".

En muista mitkä ne muut ohjelmat olivat mitä kokeilin, mutta sama ongelma mulla oli niiden kanssa, eli kuinka Linux Ubuntussa asennetaan joku kansio koti kansioon koska ilmeisesti kopioiminen / tallentaminen ei riitä ?

En tiedä Ardouria,  kysymys on juuri .tar.gz joiden asentamisen haluaisin oppia.

Kiitos

antti20121

  • Käyttäjä
  • Viestejä: 86
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #9 : 12.10.12 - klo:15.21 »
Täältä löytyi ratkaisu,

http://cs.stadia.fi/~kuivanen/linux/pakkaus.php

( pakkausten purkaminen, tar xvf ja tar xvzf . )

Tempo

  • Käyttäjä
  • Viestejä: 753
    • Profiili
Vs: miten tämä ohjelman asennus menee?
« Vastaus #10 : 12.10.12 - klo:15.27 »
Täältä löytyi ratkaisu,

http://cs.stadia.fi/~kuivanen/linux/pakkaus.php

( pakkausten purkaminen, tar xvf ja tar xvzf . )

Juu tolla saa purettua kansion.

Mä kokeilin asentaa tuon ohjelman.
Kopioi/liitä toiminnolla siirsin omaan kotikansiooni tuon tiedoston.
Purin sen sinne (hiiren oikeaa ja extract here)
Kun purettu niin hiiri puretun kansion päälle ja oikeaa näppäintä klikkaamalla valikosta "avaa pääte tässä hakemistossa"
Pääte on auki niin siihen teksti-->>    sudo sh install.sh
Paina enter niin pyytää salasanaa, kirjoita salasana kokonaan vaikka kirjoitusta ei näykään. ja taas enter.

Näin tuo kyseinen ohjelma asentui mulla.  Sitten vaan pikakuvake työpöydälle.
Läppäri aikakausi alkaa olla lopuillaan. (lopen kyllästynyt läppäreihin)
Fujitsu siemens E5925 EPA, Intel core 2 duo, 8 G ram, SSD, yms yms......

Ja linkki pääte ohjeisiin-------->http://forum.ubuntu-fi.org/index.php?topic=32091.msg282369#msg2823