Samba rikki 10.04:ssa?

[timbba]

Toimiiko muilla smbd serveri Lucidissa? Aina kun buuttaa koneen, niin ei pääse autentikoimaan. Mitähä Sambassa on sähelletty Lucidiin? Sama config toimi Karmicissa ilman mitään ongelmia.

Ainut kikkakolmonen on tehdä smbpasswd:llä uudelleen salasana käyttäjälle ja käynnistää service uudestaan pystyyn. Tämän jälkeen toimii, mutta sais kyllä toimia suoraan buutin jälkeen  

Kellään muilla samoja ongelmia?

[shelby]

On, erroria pukkaa jo käynnistyksessä. Kait se siitä joskus päivittyy ja korjaantuu.

[timbba]

On, erroria pukkaa jo käynnistyksessä. Kait se siitä joskus päivittyy ja korjaantuu.

No ei auta kuin odottaa..

Taas sen huomaa että Ubuntu julkaisuhetkellä on aina jotenkin rikki. Koskaha ne oppivat, ettei pidä sokeasti luvata releasea johonkin tiettyyn päivään.

[timbba]

Onkohan muuta mahdollisuutta kuin Samba? Jako pitäis saada mäpättyä myös windowsin exploreriin.

Saako NFS:ää mäpättyä Windowsiin?

[haspu]

Asensin eilen samban 10.04 ubuntuun ja en ainakaan ole huomannut mitään ongelmia. Samanlilla tuntuu toimivan kuin aikasemminkin.

[timbba]

Asensin eilen samban 10.04 ubuntuun ja en ainakaan ole huomannut mitään ongelmia. Samanlilla tuntuu toimivan kuin aikasemminkin.

Ja bootin jälkeenkin toimii? Mulla sen saa toimimaan vain ja ainoastaan, jos tekee bootin jälkeen komennot:

Koodia: [Valitse]

sudo smbpasswd -a käyttäjä
sudo service smbd restart
Ilman noita ei hyväksy autentikointeja.

Jos sulla toimii ok, niin pistätkö smb.conf filun sisällön. Näkee että mitä meillä on erilailla.

[910]

Saako NFS:ää mäpättyä Windowsiin?

MS:n Windows Services for Unix -työkaluissa on NFS-client. Ei tosin mitään kokemusta, eikä taida toimia home-versioilla.

[haspu]

Ja bootin jälkeenkin toimii? Mulla sen saa toimimaan vain ja ainoastaan, jos tekee bootin jälkeen komennot:

Koodia: [Valitse]

sudo smbpasswd -a käyttäjä
sudo service smbd restart
Ilman noita ei hyväksy autentikointeja.

Jos sulla toimii ok, niin pistätkö smb.conf filun sisällön. Näkee että mitä meillä on erilailla.

Toimii

smb.conf

Koodia: [Valitse]

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = no

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes


[share]
comment = Servu
path = /joku/polku/tähän
guest ok = yes
browsable = yes
read only = no
directory mask = 0777
create mask = 0775


[timbba]

Mulla oikeastaan melko samat, paitsi security hiukkasen tiukempaa:

Koodia: [Valitse]

interfaces = 192.168.10.0/24 eth0
bind interfaces only = yes

security = user
username map = /etc/samba/smbusers
passdb backend = smbpasswd

usershare allow guests = no
Lisäki jaoissa mulle on määritelty tietyt käyttäjät vain:

Koodia: [Valitse]

valid users = käyttäjä
Pitäisköhä noita suojauksia vähä höllätä, että sais tuon Samban toimimaan. Tuolla samalla conffilla kyllä Karmic pelitti täysin ongelmitta..

[timbba]

Ei auta ei... kyllä mä luovutan tuon Samba virityksen.

[haspu]

Näitä ohjeita mukaillen viritin omani:

https://help.ubuntu.com/10.04/serverguide/C/samba-fileserver.html

[timbba]

Tilapäinen ratkaisu, joka toimii! Jakoon lisättävä:

Koodia: [Valitse]

force user = käyttäjä
Tosin tämä fixi on tilapäinen, sillä kyllä sen pitäisi toimia ilmankin. Eli en pistä viel "ratkaistu" tekstiä tälle threadille.

[timbba]

Tilapäinen ratkaisu, joka toimii! Jakoon lisättävä:

Koodia: [Valitse]

force user = käyttäjä
Tosin tämä fixi on tilapäinen, sillä kyllä sen pitäisi toimia ilmankin. Eli en pistä viel "ratkaistu" tekstiä tälle threadille.

Tämäkin oli väliaikaista.  Toimi hetken ok. Nyt toimii välillä.. esim: tismalleen samanlaisista jaoista toinen saattaa toimia ja toinen ei. Välillä kumpikaan ei toimi.

Kyllä on surkeaa toimintaa, todella pettynyt laatuun jälleen kerran.

[timbba]

Huhhuijaa.. solution löydetty:

Koodia: [Valitse]

sudo apt-get remove libpam-smbpass
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/566560

Piti oikein kommentoida tuonne bugiin, että ei ole kovin käyttäjäystävällistä tuo samban konfigurointi.