Kirjoittaja Aihe: ET ei käynnisty  (Luettu 18831 kertaa)

tn

  • Käyttäjä
  • Viestejä: 472
    • Profiili
Re: ET ei käynnisty
« Vastaus #40 : 18.07.06 - klo:20.30 »
No näyttäishän tuo direct renderin olevan päällä, joten vika ei liene ainakaan 3d-kiihdytyksen puutteessa. Lähinnä huomio kiinnittyy tähän:
Lainaus
..no sitten sain jotenkin ihmeellisesti asennettua nvidian ajurit (näyttis on geforce mx420)..
Nvidianko sivulta ne ajurit hait, vai asentelitko suoraan ubuntun repoista? Voihan ongelma olla tietysti myös ET:n konffeissa. Oletko kokeillut säätää grafiikka-asetuksia? Tuleeku kuva siis "joustamalla" perässä, vai niin, että se lähtee liikkumaankin vasta 5 s hiiren liikkeen aloittamista?

saila

  • Käyttäjä
  • Viestejä: 4
    • Profiili
Re: ET ei käynnisty
« Vastaus #41 : 18.07.06 - klo:20.36 »
niin vaihdoin sinne johonkin tiedostoon nv:n tilalle nvidia, niin sitten tuli ilmotus että uusi päivitys saatavilla, niin kerneli päivittyi tai jotain..
ja hain nvidian sivuilta ne ajurit, mutta en saanut niitä asennettua mutta nyt ne on kuitenkin asennettuna ???
siis se kuva niinkun "liukuu" perässä siihen suuntaan mihin liikuttaa hiirtä.. äh, pitää varmaan käydä ottamas shotti..

muok: äh en saanu otettuu screen shottia >:(
« Viimeksi muokattu: 18.07.06 - klo:20.49 kirjoittanut saila »

tn

  • Käyttäjä
  • Viestejä: 472
    • Profiili
Re: ET ei käynnisty
« Vastaus #42 : 18.07.06 - klo:20.59 »
Lainaus
niin vaihdoin sinne johonkin tiedostoon nv:n tilalle nvidia, niin sitten tuli ilmotus että uusi päivitys saatavilla, niin kerneli päivittyi tai jotain..
OK. Käynnistitkö tämän jälkeen X:n eli graafisen tilan (tai vaikka koko koneen) uudestaa?

Lainaus
ja hain nvidian sivuilta ne ajurit, mutta en saanut niitä asennettua mutta nyt ne on kuitenkin asennettuna ???
Itse en lähtisi niitä ajureita hakemaan nvidialta, etenkin kun kyseessä ei ole mikään täysin uusinta huutoa oleva kortti ja uusimman mahdollisen version saamisella tuskin saavutetaan mitään etua. Repoista asennettuna ajurit päivittyvätkin automaattisesti ilman lisätyötä.

Katso onko sinulla paketti nvidia-glx asennettuna (vaikka synapticilla). Katso myös, mitä tulostavat kokonaisuudessaan glxinfo ja cat /etx/X11/xorg.conf

Lainaus
muok: äh en saanu otettuu screen shottia >:(
ET taitaa ottaa shotin painamalla F11. Kuvan pitäisi löytyä hakemistosta ~/.etwolf/etmain/screenshots/ tai ~/.etwolf/etmain/demos/ tms.

saila

  • Käyttäjä
  • Viestejä: 4
    • Profiili
Re: ET ei käynnisty
« Vastaus #43 : 18.07.06 - klo:21.07 »
käynnistin X:n uudestaan.. ja sit ku toi kerneli päivitty niin piti koko kone käynnistää uusiks..

nvidia-glx on asennettu..

glxinfo:

saila@ubuntu2200:~$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
server glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control
client glx vendor string: NVIDIA Corporation
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
    GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
    GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGI_swap_control, GLX_NV_float_buffer, GLX_ARB_fbconfig_float
GLX version: 1.3
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
    GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce4 MX 420/AGP/SSE/3DNOW!
OpenGL version string: 1.5.6 NVIDIA 87.62
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_pixel_buffer_object,
    GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shader_objects,
    GL_ARB_shading_language_100, GL_ARB_texture_compression,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_rectangle,
    GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object,
    GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos,
    GL_S3_s3tc, GL_EXT_texture_env_add, GL_EXT_abgr, GL_EXT_bgra,
    GL_EXT_blend_color, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_clip_volume_hint, GL_EXT_compiled_vertex_array, GL_EXT_Cg_shader,
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object,
    GL_EXT_point_parameters, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shared_texture_palette,
    GL_EXT_stencil_wrap, GL_EXT_texture_compression_s3tc,
    GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod,
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
    GL_KTX_buffer_region, GL_NV_blend_square, GL_NV_fence,
    GL_NV_fog_distance, GL_NV_light_max_exponent, GL_NV_packed_depth_stencil,
    GL_NV_pixel_data_range, GL_NV_point_sprite, GL_NV_register_combiners,
    GL_NV_texgen_reflection, GL_NV_texture_env_combine4,
    GL_NV_texture_rectangle, GL_NV_vertex_array_range,
    GL_NV_vertex_array_range2, GL_NV_vertex_program, GL_NV_vertex_program1_1,
    GL_SGIS_generate_mipmap, GL_SGIS_multitexture, GL_SGIS_texture_lod,
    GL_SUN_slice_accum
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x21 24 tc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x22 24 dc  0 32  0 r  y  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x24 24 tc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x25 24 tc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x26 24 tc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x27 24 tc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x28 24 tc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x29 24 tc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x2a 24 tc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x2b 24 tc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x2c 24 tc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x2d 24 tc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x2e 24 tc  0 32  0 r  y  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x2f 24 tc  0 32  0 r  y  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None
0x30 24 tc  0 32  0 r  .  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x31 24 tc  0 32  0 r  .  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None
0x32 24 dc  0 32  0 r  y  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x33 24 dc  0 32  0 r  .  .  8  8  8  0  4 24  8 16 16 16 16  0 0 None
0x34 24 dc  0 32  0 r  .  .  8  8  8  8  4 24  8 16 16 16 16  0 0 None
0x35 24 dc  0 32  0 r  y  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x36 24 dc  0 32  0 r  y  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x37 24 dc  0 32  0 r  .  .  8  8  8  0  4 24  0 16 16 16 16  0 0 None
0x38 24 dc  0 32  0 r  .  .  8  8  8  8  4 24  0 16 16 16 16  0 0 None
0x39 24 dc  0 32  0 r  y  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x3a 24 dc  0 32  0 r  y  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x3b 24 dc  0 32  0 r  .  .  8  8  8  0  4 16  0 16 16 16 16  0 0 None
0x3c 24 dc  0 32  0 r  .  .  8  8  8  8  4 16  0 16 16 16 16  0 0 None
0x3d 24 dc  0 32  0 r  y  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x3e 24 dc  0 32  0 r  y  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None
0x3f 24 dc  0 32  0 r  .  .  8  8  8  0  4  0  0 16 16 16 16  0 0 None
0x40 24 dc  0 32  0 r  .  .  8  8  8  8  4  0  0 16 16 16 16  0 0 None


ja cat:

saila@ubuntu2200:~$ cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/X11/fonts/misc"
        FontPath        "/usr/share/X11/fonts/cyrillic"
        FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/Type1"
        FontPath        "/usr/share/X11/fonts/100dpi"
        FontPath        "/usr/share/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "type1"
        Load    "vbe"
        Load    "GLcore"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "fi"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ExplorerPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "NVIDIA Corporation NV17 [GeForce4 MX 420]"
        Driver          "nvidia"
        BusID           "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "V70"
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "NVIDIA Corporation NV17 [GeForce4 MX 420]"
        Monitor         "V70"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1024x768" "800x600" "720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1024x768" "800x600" "720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1024x768" "800x600" "720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1024x768" "800x600" "720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1024x768" "800x600" "720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1024x768" "800x600" "720x400" "640x480" "640x350"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "stylus" "SendCoreEvents"
        InputDevice     "cursor" "SendCoreEvents"
        InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
        Mode    0666
EndSection




ok käyn jossain vaihees koittaa ottaa tota shottia..







muoks.. en saanu vieläkään sitä shottia :/
« Viimeksi muokattu: 18.07.06 - klo:21.43 kirjoittanut saila »

tn

  • Käyttäjä
  • Viestejä: 472
    • Profiili
Re: ET ei käynnisty
« Vastaus #44 : 18.07.06 - klo:21.58 »
Näyttäisi olevan ainakin muutenkin noi asetukset käyttöjärjestelmän puolesta ihan kunnossa. Vika siis lienee itse pelissä.

Lainaus
muoks.. en saanu vieläkään sitä shottia :/
Eipä tuo mitään. En kyllä tajua, miten ruudunkaappauksesta yleensäkkään voisi jotain selvitä, jos kerran ongelma on vain liikkeen hitaudessa.

Mutta ei kai vika ole liian suuressa pingissä (näkyy serverilistassa jokaisen serverin kohdalla, sekä itse pelissä painamalla <tab> ja katsomalla oman nimen kohdalta)? Entä jos käynnistät pelin omalla koneella (AltGr+^ -> aukeaa konsoli -> sinne komennetaan vaikkapa map oasis (tai sitten jostain valikoista)), onko ongelmaa?