Perusjuttuja - virhelogi

[Owdy]

Mihin ubuntu tallentaa bootatessa tulleet virheilmoitukset?

[janne]

Mihin ubuntu tallentaa bootatessa tulleet virheilmoitukset?

no, yleensä kaikki logit menevät hakemiston /var/log alle, mutta se mitä sinä etsit löytyneen bootin jälkeen komennolla dmesg

[Owdy]

Se jumittaa hetken buutatessa siihen network osioon. Sanooko nämä kenellekkään mitään?

Koodia: [Valitse]

[4294759.815000] skge eth1: enabling interface
[4294760.900000] NET: Registered protocol family 17
[4294761.551000] skge eth1: Link is up at 100 Mbps, full duplex, flow control tx and rx
[4294775.309000] NET: Registered protocol family 10
[4294775.309000] lo: Disabled Privacy Extensions
[4294775.309000] IPv6 over IPv4 tunneling driver
[4294775.851000] ttyS0: LSR safety check engaged!
[4294775.852000] ttyS0: LSR safety check engaged!
[4294775.860000] ttyS1: LSR safety check engaged!
[4294775.861000] ttyS1: LSR safety check engaged!
[4294776.889000] ACPI: Power Button (FF) [PWRF]
[4294776.889000] ACPI: Power Button (CM) [PWRB]
[4294776.988000] ibm_acpi: ec object not found
[4294777.009000] pcc_acpi: loading...
[4294777.930000] ttyS0: LSR safety check engaged!
[4294779.181000] ttyS1: LSR safety check engaged!
[4294779.191000] ttyS0: LSR safety check engaged!
[4294782.028000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294782.028000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294782.028000] agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
[4294782.194000] i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
[4294782.194000] i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips
[4294782.194000] i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips
[4294782.960000] ttyS0: LSR safety check engaged!
[4294785.082000] ip_tables: (C) 2000-2002 Netfilter core team
[4294785.208000] Netfilter messages via NETLINK v0.30.
[4294785.211000] ip_conntrack version 2.4 (8191 buckets, 65528 max) - 232 bytes per conntrack
[4294786.282000] eth1: no IPv6 routers present
[4294787.960000] ttyS0: LSR safety check engaged!
[4294788.525000] /dev/vmmon[4917]: Module vmmon: registered with major=10 minor=165
[4294788.525000] /dev/vmmon[4917]: Module vmmon: initialized
[4294789.131000] /dev/vmnet: open called by PID 4943 (vmnet-bridge)
[4294789.131000] /dev/vmnet: hub 0 does not exist, allocating memory.
[4294789.131000] /dev/vmnet: port on hub 0 successfully opened
[4294789.132000] bridge-eth0: peer interface eth0 not found, will wait for it to come up
[4294789.132000] bridge-eth0: attached
[4294789.138000] /dev/vmnet: open called by PID 4948 (vmnet-bridge)
[4294789.138000] /dev/vmnet: hub 2 does not exist, allocating memory.
[4294789.138000] /dev/vmnet: port on hub 2 successfully opened
[4294789.138000] bridge-eth1: enabling the bridge
[4294789.138000] bridge-eth1: up
[4294789.139000] bridge-eth1: already up
[4294789.139000] bridge-eth1: attached
[4294789.144000] /dev/vmnet: open called by PID 4953 (vmnet-bridge)
[4294789.144000] /dev/vmnet: hub 3 does not exist, allocating memory.
[4294789.144000] /dev/vmnet: port on hub 3 successfully opened
[4294789.144000] bridge-eth2: peer interface eth2 not found, will wait for it to come up
[4294789.145000] bridge-eth2: attached
[4294791.458000] ttyS0: LSR safety check engaged!
[4294791.458000] ttyS1: LSR safety check engaged!
[4294792.961000] ttyS0: LSR safety check engaged!
[4294797.961000] ttyS0: LSR safety check engaged!
[4294802.962000] ttyS0: LSR safety check engaged!
[4294807.963000] ttyS0: LSR safety check engaged!
[4294812.963000] ttyS0: LSR safety check engaged!
[4294817.964000] ttyS0: LSR safety check engaged!
[4294822.965000] ttyS0: LSR safety check engaged!
[4294827.966000] ttyS0: LSR safety check engaged!
[4294832.967000] ttyS0: LSR safety check engaged!
[4294837.968000] ttyS0: LSR safety check engaged!
[4294842.968000] ttyS0: LSR safety check engaged!
[4294847.968000] ttyS0: LSR safety check engaged!
[4294852.969000] ttyS0: LSR safety check engaged!
[4294857.970000] ttyS0: LSR safety check engaged!
[4294862.971000] ttyS0: LSR safety check engaged!
[4294867.971000] ttyS0: LSR safety check engaged!
[4294872.971000] ttyS0: LSR safety check engaged!
[4294877.971000] ttyS0: LSR safety check engaged!
[4294882.971000] ttyS0: LSR safety check engaged!
[4294887.972000] ttyS0: LSR safety check engaged!
[4294892.973000] ttyS0: LSR safety check engaged!
[4294897.974000] ttyS0: LSR safety check engaged!
[4294902.979000] ttyS0: LSR safety check engaged!
[4294907.980000] ttyS0: LSR safety check engaged!
[4294912.981000] ttyS0: LSR safety check engaged!
[4294917.985000] ttyS0: LSR safety check engaged!
[4294922.993000] ttyS0: LSR safety check engaged!
[4294927.993000] ttyS0: LSR safety check engaged!
[4294932.995000] ttyS0: LSR safety check engaged!
[4294937.996000] ttyS0: LSR safety check engaged!
[4294942.997000] ttyS0: LSR safety check engaged!
[4294948.000000] ttyS0: LSR safety check engaged!
[4294953.000000] ttyS0: LSR safety check engaged!
[4294958.000000] ttyS0: LSR safety check engaged!
[4294963.014000] ttyS0: LSR safety check engaged!
[4294968.019000] ttyS0: LSR safety check engaged!
[4294973.022000] ttyS0: LSR safety check engaged!
[4294978.023000] ttyS0: LSR safety check engaged!
[4294983.025000] ttyS0: LSR safety check engaged!
[4294988.025000] ttyS0: LSR safety check engaged!
[4294993.026000] ttyS0: LSR safety check engaged!
[4294998.027000] ttyS0: LSR safety check engaged!
[4295003.028000] ttyS0: LSR safety check engaged!
[4295008.028000] ttyS0: LSR safety check engaged!
[4295013.028000] ttyS0: LSR safety check engaged!
[4295018.029000] ttyS0: LSR safety check engaged!
[4295023.031000] ttyS0: LSR safety check engaged!
[4295028.036000] ttyS0: LSR safety check engaged!
[4295033.037000] ttyS0: LSR safety check engaged!
[4295038.037000] ttyS0: LSR safety check engaged!
[4295043.037000] ttyS0: LSR safety check engaged!
[4295048.038000] ttyS0: LSR safety check engaged!
[4295053.038000] ttyS0: LSR safety check engaged!
[4295058.040000] ttyS0: LSR safety check engaged!
[4295063.049000] ttyS0: LSR safety check engaged!
[4295068.049000] ttyS0: LSR safety check engaged!
[4295073.052000] ttyS0: LSR safety check engaged!
[4295078.053000] ttyS0: LSR safety check engaged!
[4295083.055000] ttyS0: LSR safety check engaged!
[4295088.056000] ttyS0: LSR safety check engaged!
[4295093.060000] ttyS0: LSR safety check engaged!
[4295098.060000] ttyS0: LSR safety check engaged!
[4295103.061000] ttyS0: LSR safety check engaged!
[4295108.063000] ttyS0: LSR safety check engaged!
[4295113.064000] ttyS0: LSR safety check engaged!
[4295118.078000] ttyS0: LSR safety check engaged!
[4295123.078000] ttyS0: LSR safety check engaged!
[4295128.080000] ttyS0: LSR safety check engaged!
[4295133.080000] ttyS0: LSR safety check engaged!
[4295138.081000] ttyS0: LSR safety check engaged!
[4295143.093000] ttyS0: LSR safety check engaged!
[4295148.094000] ttyS0: LSR safety check engaged!
[4295153.094000] ttyS0: LSR safety check engaged!
[4295158.096000] ttyS0: LSR safety check engaged!
[4295163.096000] ttyS0: LSR safety check engaged!
[4295168.098000] ttyS0: LSR safety check engaged!
[4295173.099000] ttyS0: LSR safety check engaged!
[4295178.099000] ttyS0: LSR safety check engaged!
[4295183.099000] ttyS0: LSR safety check engaged!
[4295188.101000] ttyS0: LSR safety check engaged!
[4295193.108000] ttyS0: LSR safety check engaged!
[4295198.124000] ttyS0: LSR safety check engaged!
[4295203.124000] ttyS0: LSR safety check engaged!
[4295208.125000] ttyS0: LSR safety check engaged!
[4295213.125000] ttyS0: LSR safety check engaged!
[4295218.126000] ttyS0: LSR safety check engaged!
[4295223.127000] ttyS0: LSR safety check engaged!
[4295228.128000] ttyS0: LSR safety check engaged!
[4295233.136000] ttyS0: LSR safety check engaged!
[4295238.136000] ttyS0: LSR safety check engaged!
[4295243.137000] ttyS0: LSR safety check engaged!
[4295248.139000] ttyS0: LSR safety check engaged!
[4295253.140000] ttyS0: LSR safety check engaged!
[4295258.141000] ttyS0: LSR safety check engaged!
[4295263.141000] ttyS0: LSR safety check engaged!
[4295268.141000] ttyS0: LSR safety check engaged!
[4295273.143000] ttyS0: LSR safety check engaged!
[4295278.143000] ttyS0: LSR safety check engaged!
[4295283.146000] ttyS0: LSR safety check engaged!
[4295288.153000] ttyS0: LSR safety check engaged!
[4295293.163000] ttyS0: LSR safety check engaged!
[4295298.169000] ttyS0: LSR safety check engaged!
[4295303.182000] ttyS0: LSR safety check engaged!
[4295308.184000] ttyS0: LSR safety check engaged!
[4295313.194000] ttyS0: LSR safety check engaged!
[4295318.201000] ttyS0: LSR safety check engaged!
[4295323.208000] ttyS0: LSR safety check engaged!
[4295328.209000] ttyS0: LSR safety check engaged!
[4295333.209000] ttyS0: LSR safety check engaged!
[4295338.212000] ttyS0: LSR safety check engaged!
[4295343.212000] ttyS0: LSR safety check engaged!
[4295348.213000] ttyS0: LSR safety check engaged!
osku@Koti:~$



[Owdy]

se mitä sinä etsit löytyneen bootin jälkeen komennolla dmesg

Kun buutatessa ajetaan se levyntarkitushomma läpi, siinä tulee ihme erroreita. Olisi kiva saada ne esiin. Millä komennolla sen saa ajettua manuaalisesti läpi?

[janne]

Kun buutatessa ajetaan se levyntarkitushomma läpi, siinä tulee ihme erroreita. Olisi kiva saada ne esiin. Millä komennolla sen saa ajettua manuaalisesti läpi?

mitä tiedostojärjestelmä sinulla on käytössä?

komennoksi käy varmaan joku fsck-akuinen.

[Owdy]

mitä tiedostojärjestelmä sinulla on käytössä?

ext3

komennoksi käy varmaan joku fsck-akuinen.

Koodia: [Valitse]

osku@Koti:~$ fsck
fsck 1.38 (30-Jun-2005)
e2fsck 1.38 (30-Jun-2005)
/dev/sda5 is mounted.

WARNING!!!  Running e2fsck on a mounted filesystem may cause
SEVERE filesystem damage.

Do you really want to continue (y/n)?


[janne]

Koodia: [Valitse]

osku@Koti:~$ fsck
fsck 1.38 (30-Jun-2005)
e2fsck 1.38 (30-Jun-2005)
/dev/sda5 is mounted.

WARNING!!!  Running e2fsck on a mounted filesystem may cause
SEVERE filesystem damage.

Do you really want to continue (y/n)?


juu, tuo kannattaa ajaa vaikka live-cd:ltä.

[Owdy]

Okei, ei ollut tuo komento

ubuntu@ubuntu:~$ sudo fsck /dev/sda5
fsck 1.38 (30-Jun-2005)
e2fsck 1.38 (30-Jun-2005)
/dev/sda5: clean, 158637/2578560 files, 1091651/5152840 blocks

Se on se kohta missa sanotaan jotain  /dev/sda5 has been mounted x times, check forced tjsp.

[fly]

eikö se ole se muistitesti joka tulee noin kolmaskymmenes kerta?

[Owdy]

Muistitesti? Levyosioita se katsoo. Mutta tulee noin joka 30 buutti.

[janne]

Se on se kohta missa sanotaan jotain  /dev/sda5 has been mounted x times, check forced tjsp.

tuo viesti ei kyllä ole sen levyntarkistussoftan tulostama, vaan sen joka sen tarkistussoftan siinä bootin yhteydessä ajaa.

[Owdy]

No oli mikä hyvänsä mutta tarvitsen ne virheilmoitukset talteen että voi selvittää mikä mättää Se tarkistussofta joka tapauksessa ne virheilmot antaa.

[fly]

mä oon luullu et se tarkistaa mun koneen muistit ihmettelinki vähäsen et mitä se liittyy siihen mounttaamiseen.

[janne]

No oli mikä hyvänsä mutta tarvitsen ne virheilmoitukset talteen että voi selvittää mikä mättää Se tarkistussofta joka tapauksessa ne virheilmot antaa.

kyllä sen pitäisi tuo softa olla. siis sehäön myös korjaa ne virheet joita se löytää, joten niiden ei pitäisi siis enää olla siellä levyllä. kyllä ne virheet minusta myös siihen dmesg-logiin kirjoitetaan, mutta useasti sitä on monta ruudullista. jos tuo virhe nyt vielä ilmaantuu, niin ohjaa tuon dmesgin tuloste tiedostoon ja etsi tavaraa sieltä. siis vaikka näin:

Koodia: [Valitse]

$ dmesg ~/logia.txt
ja avaa tuo tiedosto sitten haluamallasi tekstieditorilla.

[Owdy]

Koodia: [Valitse]

$ dmesg /home/osku/logia.txtei tuota mitään tiedostoa.

[janne]

Koodia: [Valitse]

$ dmesg /home/osku/logia.txtei tuota mitään tiedostoa.

ei tietenkään, koska neuvoin väärin. siis se tekstihän pitää tietysti ohjeta sinne tiedostoon:

Koodia: [Valitse]

$ dmesg > ~/logia.txt