Kirjoittaja Aihe: 2 näyttöä + Xinerama + Openarena hiiri-ongelma  (Luettu 2469 kertaa)

timsku

  • Käyttäjä
  • Viestejä: 225
    • Profiili
Lisäsin LCD:n rinnalle vanhan philipsin CRT:n. Kaikki toimii lähes kuten haluan, Openarenan kanssa ilmaantui Xineraman myötä hiiri-ongelma: kun käynnistän Openarenan, on hiiren osoitin heti alkuvalikoista lähtien kuvaruudun vasemmassa reunassa. Vähänkin jos liikutan hiirtä, hyppää osoitin oikeaan reunaan. Tämän jälkeen osoitinta saa liikutettua vain ylös-alas, vasemmalle ei enää päästä. Aikaisemmin peli toimi loistavasti. Näppis kyllä toimii normaalisti, myös itse pelissä hiiri käyttäytyy sivusuunnassa tapista-tappiin tyyliin.

Laitteisto:
Kubuntu Hardy
17" philips CRT (kiinni VGA-liittimessä)
22" Acer LCD (kiinni DVI-liittimessä)
Club 3d 7600 GS 256M AGP
Logitech USB-hiiri (kokeilin myös usb-ps2-sovittimen kanssa, sama tulos)

xorg.conf:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@vernadsky)  Thu Jun  5 09:26:53 UTC 2008


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 1280 0
    Screen      1  "Screen1" LeftOf "Screen0"
    InputDevice    "Keyboard" "CoreKeyboard"
    InputDevice    "Mouse" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "1"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Acer P223W"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 75.0
    ModeLine       "1680x1050@60" 147.1 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
    ModeLine       "1600x1024@60" 136.4 1600 1704 1872 2144 1024 1025 1028 1060 -hsync +vsync
    ModeLine       "1440x900@75" 136.5 1440 1536 1688 1936 900 901 904 940 -hsync +vsync
    ModeLine       "1440x900@60" 106.5 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
    ModeLine       "1280x800@75" 107.2 1280 1360 1496 1712 800 801 804 835 -hsync +vsync
    ModeLine       "1280x800@60" 83.5 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
    ModeLine       "1280x768@75" 103.0 1280 1360 1496 1712 768 769 772 802 -hsync +vsync
    ModeLine       "1280x768@60" 80.1 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
    ModeLine       "1280x720@60" 74.5 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
    ModeLine       "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine       "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "PHILIPS 107E"
    HorizSync       30.0 - 70.0
    VertRefresh     50.0 - 160.0
    ModeLine       "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
    ModeLine       "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine       "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    ModeLine       "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine       "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
    ModeLine       "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
    ModeLine       "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    ModeLine       "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine       "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "640x480@85" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
    ModeLine       "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine       "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine       "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GS"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Videocard1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GS"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"

# Removed Option "metamodes" "DFP: 1680x1050@60 +0+0; DFP: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Videocard1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "CRT: 1280x1024 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection


Ja vielä pieni jatkokymysys: Miten teen pikakuvakkeen joka ajaa ohjelman sillä työpöydällä ja näytöllä josta se käynnistetään. Jokin parametri application välilehden command kohtaan(ko) ?
« Viimeksi muokattu: 09.08.08 - klo:18.16 kirjoittanut timsku »