Kirjoittaja Aihe: [Ratkaistu]OpenGL (3D) -tuen saaminen  (Luettu 5800 kertaa)

Akseli007

  • Käyttäjä
  • Viestejä: 77
    • Profiili
[Ratkaistu]OpenGL (3D) -tuen saaminen
« : 15.06.08 - klo:15.31 »
Mitä teen? Kone ei pyöritä supertux2, koska ei oo OpenGL Mistä sen saa. saako? Voisitteko auttaa?
« Viimeksi muokattu: 22.06.08 - klo:12.45 kirjoittanut Akseli007 »

Jakke77

  • Käyttäjä
  • Viestejä: 3932
  • Oulu (Oinaansuo)
    • Profiili
Vs: Help?
« Vastaus #1 : 15.06.08 - klo:19.18 »
mikä näytön ohjain sulla on
U_G_H

Aspire E5-575G V1.27 CPU: Intel i3-6100U (4) @ 2.300GHz GPU: Intel® HD Graphics 520 GPU: NVIDIA GeForce 940MX Samsung SSD 970 EVO Plus 500GB

Akseli007

  • Käyttäjä
  • Viestejä: 77
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #2 : 16.06.08 - klo:18.16 »
En tiiä mut kyllä sen pitäisi super tux:ia pyörittää

Jakke77

  • Käyttäjä
  • Viestejä: 3932
  • Oulu (Oinaansuo)
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #3 : 16.06.08 - klo:18.45 »
mitä antaa komento

Koodia: [Valitse]
glxinfo | grep direct
U_G_H

Aspire E5-575G V1.27 CPU: Intel i3-6100U (4) @ 2.300GHz GPU: Intel® HD Graphics 520 GPU: NVIDIA GeForce 940MX Samsung SSD 970 EVO Plus 500GB

Akseli007

  • Käyttäjä
  • Viestejä: 77
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #4 : 16.06.08 - klo:20.25 »
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
OpenGL renderer string: Mesa GLX Indirect          Tollee se sano!

Jakke77

  • Käyttäjä
  • Viestejä: 3932
  • Oulu (Oinaansuo)
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #5 : 16.06.08 - klo:21.40 »
seuraavaksi voisit kopsata tänne xorg.conf tiedoston kokonaisuudessaan

Koodia: [Valitse]
sudo gedit /etc/X11/xorg.conf
U_G_H

Aspire E5-575G V1.27 CPU: Intel i3-6100U (4) @ 2.300GHz GPU: Intel® HD Graphics 520 GPU: NVIDIA GeForce 940MX Samsung SSD 970 EVO Plus 500GB

gdm

  • Sitä saa mitä tilaa...
  • Käyttäjä
  • Viestejä: 4363
    • Profiili
    • Keskustelualueiden säännöt
Vs: Help?
« Vastaus #6 : 16.06.08 - klo:23.26 »
mikä näytön ohjain sulla on
komento lspci on hyvä komento laitteiston listaamisessa.
Tai lshw -C display tässä tapauksessa, näytön suhteen.

mitä antaa komento
Koodia: [Valitse]
glxinfo | grep direct
Tuolla komennolla saadaan tietää onko 3d kiihdytys päällä.

seuraavaksi voisit kopsata tänne xorg.conf tiedoston kokonaisuudessaan
Koodia: [Valitse]
sudo gedit /etc/X11/xorg.conf
Miksi ylläpitäjän oikeuksilla yksinkertainen tiedoston tulostus, vielä tekstieditoriin?
cat /etc/X11/xorg.conf
 cat komento on tiedoston katsomiseen soveltuva komento.
Lisää [Ratkaistu] aloitusviestiin jos ongelmasi selviää!
Saamasi tuki on ilmaista, joten älä vaadi tai uhkaile saadaksesi apua!

Jakke77

  • Käyttäjä
  • Viestejä: 3932
  • Oulu (Oinaansuo)
    • Profiili
Vs: Help?
« Vastaus #7 : 17.06.08 - klo:00.05 »

Miksi ylläpitäjän oikeuksilla yksinkertainen tiedoston tulostus, vielä tekstieditoriin?


miksi ei  ??? ihme nipottajia
U_G_H

Aspire E5-575G V1.27 CPU: Intel i3-6100U (4) @ 2.300GHz GPU: Intel® HD Graphics 520 GPU: NVIDIA GeForce 940MX Samsung SSD 970 EVO Plus 500GB

gdm

  • Sitä saa mitä tilaa...
  • Käyttäjä
  • Viestejä: 4363
    • Profiili
    • Keskustelualueiden säännöt
Vs: Help?
« Vastaus #8 : 17.06.08 - klo:10.26 »

Miksi ylläpitäjän oikeuksilla yksinkertainen tiedoston tulostus, vielä tekstieditoriin?


miksi ei  ??? ihme nipottajia
Varmaankin sen takia kun ei ole tarvetta!
Ja jos sattuu vaikka näppäilemään sinne tiedostoon uusia merkkejä, niin sitten ihmetellään urakalla miksi jotkut asiat tökkii!

Tottakai sitä järjestelmää saa ajaa "root(ylläpitäjän)" oikeuksin.
Uudelleenasennukset ja järjestelmän pelastaminen on mukavaa puuhaa. Varsinkin jos ei tiedä mitä tekee(aloittelijat).

sudo on sitä varten tehty, että tilapäisesti sitä vaativissa tehtävissä voidaan tehdä ylläpito-tehtäviä.
Lisää [Ratkaistu] aloitusviestiin jos ongelmasi selviää!
Saamasi tuki on ilmaista, joten älä vaadi tai uhkaile saadaksesi apua!

JTap

  • Käyttäjä
  • Viestejä: 276
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #9 : 19.06.08 - klo:08.35 »
Yleensä riittää kun asentaa näytönohjaimen rajoitetun ajurin, ei yleensä tarvita näitä 'mitä sanoo komento sejase' -litanioita. Siihen ei tarvitse edes tietää mikä näytönohjain koneessa on. Jos tulee herja 'et tarvitse rajoitettua ajuria' niin siinä vaiheessa ehkä vasta kannattaa alkaa tarkempaan selvittelyyn. Tyvestä puuhun, please.

Jakke77

  • Käyttäjä
  • Viestejä: 3932
  • Oulu (Oinaansuo)
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #10 : 19.06.08 - klo:09.22 »
Yleensä riittää kun asentaa näytönohjaimen rajoitetun ajurin, ei yleensä tarvita näitä 'mitä sanoo komento sejase' -litanioita. Siihen ei tarvitse edes tietää mikä näytönohjain koneessa on. Jos tulee herja 'et tarvitse rajoitettua ajuria' niin siinä vaiheessa ehkä vasta kannattaa alkaa tarkempaan selvittelyyn. Tyvestä puuhun, please.

näinhän se on, mutta nykyään kun nämä rajoitetut ajurit toimii miten toimii niin olisi hyvä tietää onko kyseessä ati vai nvidia, itsellä ati ja kokemuskesta tiedän miten paljon kivempaa on kun ei ole rajoitetut ajurit asennettu ubuntun valikoista
U_G_H

Aspire E5-575G V1.27 CPU: Intel i3-6100U (4) @ 2.300GHz GPU: Intel® HD Graphics 520 GPU: NVIDIA GeForce 940MX Samsung SSD 970 EVO Plus 500GB

Akseli007

  • Käyttäjä
  • Viestejä: 77
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #11 : 20.06.08 - klo:10.44 »
Tällee sanoo ku käyttää LSHW koodia
 akseli007@kansala:~$ lshw
WARNING: you should run this program as super-user.
kansala                   
    description: Computer
    width: 32 bits
  *-core
       description: Motherboard
       physical id: 0
     *-memory
          description: System memory
          physical id: 0
          size: 254MiB
     *-cpu
          product: Pentium III (Coppermine)
          vendor: Intel Corp.
          physical id: 1
          bus info: cpu@0
          version: 6.8.6
          size: 800MHz
          width: 32 bits
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse up
        *-cache:0
             description: L1 cache
             physical id: 0
             size: 32KiB
        *-cache:1
             description: L2 cache
             physical id: 1
             size: 256KiB
     *-pci
          description: Host bridge
          product: 82810E DC-133 (GMCH) Graphics Memory Controller Hub
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 03
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel module=intel_agp
        *-display
             description: VGA compatible controller
             product: 82810E DC-133 (CGC) Chipset Graphics Controller
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 03
             width: 32 bits
             clock: 66MHz
             capabilities: vga_controller bus_master cap_list
             configuration: driver=i810_smbus latency=0 module=i2c_i810
        *-pci
             description: PCI bridge
             product: 82801AA PCI Bridge
             vendor: Intel Corporation
             physical id: 1e
             bus info: pci@0000:00:1e.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: pci normal_decode bus_master
           *-multimedia
                description: Multimedia audio controller
                product: ES1371 [AudioPCI-97]
                vendor: Ensoniq
                physical id: 9
                bus info: pci@0000:01:09.0
                version: 09
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list
                configuration: driver=ENS1371 latency=64 maxlatency=128 mingnt=12 module=snd_ens1371
           *-network
                description: Ethernet interface
                product: 3c905C-TX/TX-M [Tornado]
                vendor: 3Com Corporation
                physical id: c
                bus info: pci@0000:01:0c.0
                logical name: eth0
                version: 78
                serial: 00:b0:d0:8b:34:53
                width: 32 bits
                clock: 33MHz
                capabilities: bus_master cap_list ethernet physical
                configuration: broadcast=yes driver=3c59x ip=85.157.242.98 latency=64 maxlatency=10 mingnt=10 module=3c59x multicast=yes
        *-isa
             description: ISA bridge
             product: 82801AA ISA Bridge (LPC)
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-ide
             description: IDE interface
             product: 82801AA IDE Controller
             vendor: Intel Corporation
             physical id: 1f.1
             bus info: pci@0000:00:1f.1
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: ide bus_master
             configuration: driver=ata_piix latency=0 module=ata_piix
        *-usb
             description: USB Controller
             product: 82801AA USB Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 02
             width: 32 bits
             clock: 33MHz
             capabilities: uhci bus_master
             configuration: driver=uhci_hcd latency=0 module=uhci_hcd
        *-serial UNCLAIMED
             description: SMBus
             product: 82801AA SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 02
             width: 32 bits
             clock: 33MHz
             configuration: latency=0
 


Akseli007

  • Käyttäjä
  • Viestejä: 77
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #12 : 20.06.08 - klo:10.55 »
ja kun käytin koodia cat /etc/X11/xorg.conf se pisti tään!

akseli007@kansala:~$ cat /etc/X11/xorg.conf
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "fi"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"   "/dev/input/mice"
   Option      "Protocol"   "ImPS/2"
   Option      "ZAxisMapping"   "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "stylus"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "eraser"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "cursor"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
   Boardname   "intel"
   Busid      "PCI:0:1:0"
   Driver      "intel"
   Screen   0
EndSection

Section "Monitor"
   Identifier   "Plug & Play"
   Vendorname   "Plug 'n' Play"
   Modelname   "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
   Gamma   1.0
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
   Monitor      "Plug & Play"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Virtual   1400   1050
      Modes      "1280x1024@60"   "1400x1050@60"   "1280x960@60"   "1152x864@75"   "1024x768@43"   "1024x768@60"   "1024x768@70"   "1024x768@75"   "1024x768@85"   "832x624@75"   "800x600@60"   "800x600@85"   "800x600@75"   "800x600@72"   "800x600@56"   "640x480@85"   "640x480@75"   "640x480@72"   "640x480@60"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
  screen 0 "Default Screen" 0 0
   Inputdevice   "Generic Keyboard"
   Inputdevice   "Configured Mouse"
   
   # Uncomment if you have a wacom tablet
   #   InputDevice     "stylus"   "SendCoreEvents"
   #   InputDevice     "cursor"   "SendCoreEvents"
   #   InputDevice     "eraser"   "SendCoreEvents"
EndSection
Section "Module"
   Load      "glx"
   Load      "GLcore"
   Load      "v4l"
EndSection
Section "ServerFlags"
EndSection
akseli007@kansala:~$


tuke81

  • Käyttäjä
  • Viestejä: 1667
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #13 : 21.06.08 - klo:01.17 »
...
     *-pci
          description: Host bridge
          product: 82810E DC-133 (GMCH) Graphics Memory Controller Hub
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 03
          width: 32 bits
          clock: 33MHz
          configuration: driver=agpgart-intel module=intel_agp
        *-display
             description: VGA compatible controller
             product: 82810E DC-133 (CGC) Chipset Graphics Controller
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 03
             width: 32 bits
             clock: 66MHz
             capabilities: vga_controller bus_master cap_list
             configuration: driver=i810_smbus latency=0 module=i2c_i810
   ...

Intelin integroitu i810 on kyllä hyvin tuettu, ajureiden man -sivujen mukaan 3D(dri) toimii vain 16-bittisenä. Joten koetappa vaihtaa default asetukseksi 16 bittiset värit eli:

Koodia: [Valitse]
Section "Screen"
   Identifier   "Default Screen"
   Device      "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
   Monitor      "Plug & Play"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Virtual   1400   1050
      Modes      "1280x1024@60"   "1400x1050@60"   "1280x960@60"   "1152x864@75"   "1024x768@43"   "1024x768@60"   "1024x768@70"   "1024x768@75"   "1024x768@85"   "832x624@75"   "800x600@60"   "800x600@85"   "800x600@75"   "800x600@72"   "800x600@56"   "640x480@85"   "640x480@75"   "640x480@72"   "640x480@60"
   EndSubSection
EndSection
->
Koodia: [Valitse]
Section "Screen"
   Identifier   "Default Screen"
   Device      "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
   Monitor      "Plug & Play"
   Defaultdepth   16
   SubSection "Display"
      Depth   16
      Virtual   1400   1050
      Modes      "1280x1024@60"   "1400x1050@60"   "1280x960@60"   "1152x864@75"   "1024x768@43"   "1024x768@60"   "1024x768@70"   "1024x768@75"   "1024x768@85"   "832x624@75"   "800x600@60"   "800x600@85"   "800x600@75"   "800x600@72"   "800x600@56"   "640x480@85"   "640x480@75"   "640x480@72"   "640x480@60"
   EndSubSection
EndSection
Miksi tehdä jotain helposti, kun sen voi tehdä vaikeastikin...

Akseli007

  • Käyttäjä
  • Viestejä: 77
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #14 : 21.06.08 - klo:09.21 »
En tajunnu? Eikä tainnu toimia? :(

Akseli007

  • Käyttäjä
  • Viestejä: 77
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #15 : 21.06.08 - klo:10.10 »
koitin pistää /etc/X11/Xorg.conf   tiedostoon defaultdepth riville 16 mutta se sano että

Tiedoston "/etc/X11/xorg.conf" tallentaminen epäonnistui.

Oikeutesi eivät riitä tiedoston tallentamiseen. Tarkista, että annoit sijainnin oikein ja yritä uudelleen.

Vaikka mulla pitäisi olla kaikki oikeudet!

Anssi

  • Käyttäjä
  • Viestejä: 1342
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #16 : 21.06.08 - klo:10.13 »
En tajunnu? Eikä tainnu toimia? :(

komenna
Koodia: [Valitse]
sudo gedit /etc/X11/xorg.confetsi kohta
Intelin integroitu i810 on kyllä hyvin tuettu, ajureiden man -sivujen mukaan 3D(dri) toimii vain 16-bittisenä. Joten koetappa vaihtaa default asetukseksi 16 bittiset värit eli:

Koodia: [Valitse]
Section "Screen"
   Identifier   "Default Screen"
   Device      "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
   Monitor      "Plug & Play"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Virtual   1400   1050
      Modes      "1280x1024@60"   "1400x1050@60"   "1280x960@60"   "1152x864@75"   "1024x768@43"   "1024x768@60"   "1024x768@70"   "1024x768@75"   "1024x768@85"   "832x624@75"   "800x600@60"   "800x600@85"   "800x600@75"   "800x600@72"   "800x600@56"   "640x480@85"   "640x480@75"   "640x480@72"   "640x480@60"
   EndSubSection
EndSection
ja muuta sielta tuo 24 -> 16:ksi
kuten tässä alla
->
Koodia: [Valitse]
Section "Screen"
   Identifier   "Default Screen"
   Device      "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
   Monitor      "Plug & Play"
   Defaultdepth   16
   SubSection "Display"
      Depth   16
      Virtual   1400   1050
      Modes      "1280x1024@60"   "1400x1050@60"   "1280x960@60"   "1152x864@75"   "1024x768@43"   "1024x768@60"   "1024x768@70"   "1024x768@75"   "1024x768@85"   "832x624@75"   "800x600@60"   "800x600@85"   "800x600@75"   "800x600@72"   "800x600@56"   "640x480@85"   "640x480@75"   "640x480@72"   "640x480@60"
   EndSubSection
EndSection


tallenna ja käynnistä kone uudestaan...

wally

  • Käyttäjä
  • Viestejä: 138
    • Profiili
Vs: OpenGL (3D) -tuen saaminen
« Vastaus #17 : 21.06.08 - klo:11.10 »
koitin pistää /etc/X11/Xorg.conf   tiedostoon defaultdepth riville 16 mutta se sano että

Tiedoston "/etc/X11/xorg.conf" tallentaminen epäonnistui.

Oikeutesi eivät riitä tiedoston tallentamiseen. Tarkista, että annoit sijainnin oikein ja yritä uudelleen.

Vaikka mulla pitäisi olla kaikki oikeudet!

Jos et muokannut tuota tiedostoa sudon kanssa, sinulla ei ole tarvittavia oikeuksia.

sudo:lla saat aina hetkeksi käyttöösi pääkäyttäjän oikeudet, mutta kannattaa aina miettiä tarkkaan, mitä niillä oikeuksilla tekee. Niillä kun voi tehdä mitä tahansa, esimerkiksi tyhjentää koko kovalevyn tai vielä paljon pahempaa.

Normaalisti ilman sudoa sinulla ei ole kirjoitusoikeuksia käytännössä juuri muualle kuin omaan kotihakemistoosi, joka on mahdollisesti /home/akseli007

Siis:
sudo gedit /etc/X11/xorg.conf

Jakke77

  • Käyttäjä
  • Viestejä: 3932
  • Oulu (Oinaansuo)
    • Profiili
Vs: [Ratkaistu]OpenGL (3D) -tuen saaminen
« Vastaus #18 : 22.06.08 - klo:17.03 »
Lainaus
Section "Screen"
   Identifier   "Default Screen"
   Device      "Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller]"
   Monitor      "Plug & Play"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Virtual   1400   1050
      Modes      "1280x1024@60"   "1400x1050@60"   "1280x960@60"   "1152x864@75"   "1024x768@43"   "1024x768@60"   "1024x768@70"   "1024x768@75"   "1024x768@85"   "832x624@75"   "800x600@60"   "800x600@85"   "800x600@75"   "800x600@72"   "800x600@56"   "640x480@85"   "640x480@75"   "640x480@72"   "640x480@60"
   EndSubSection
EndSection

jos näin väreillä vois korostaa ne kohdat mitkä halutaan vaihtaa  8)  8) 8)
U_G_H

Aspire E5-575G V1.27 CPU: Intel i3-6100U (4) @ 2.300GHz GPU: Intel® HD Graphics 520 GPU: NVIDIA GeForce 940MX Samsung SSD 970 EVO Plus 500GB