Moikka taas ja näissä merkeissä jälleen. Ilmeisesti eilisen päivityksen jälkeinen tila on se että kone ei sammu.
Olen nyt kovasti koettanut toimia viimekertaisen tavan mukaan mutta on se hieman hankalaa koska ei A: en saa tallennettua muutosta B: siellä on jotain mikä kiusaa. "Siellä" tarkoittaa menu.lst. laitan mukaan sisällön joka on seuraava:
# menu.lst - See: grub(
, info grub, update-grub(
# grub-install(
, grub-floppy(
,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=37db51f4-f905-4174-838d-86b377b9a830 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=37db51f4-f905-4174-838d-86b377b9a830 ro quiet splash
initrd /boot/initrd.img-2.6.22-14-generic
quiet
title Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=37db51f4-f905-4174-838d-86b377b9a830 ro single
initrd /boot/initrd.img-2.6.22-14-generic
title Ubuntu 7.10, kernel 2.6.20-16-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=37db51f4-f905-4174-838d-86b377b9a830 ro quiet splash locale=fi_FI acpi=force
initrd /boot/initrd.img-2.6.20-16-generic
quiet
title Ubuntu 7.10, kernel 2.6.20-16-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=37db51f4-f905-4174-838d-86b377b9a830 ro single
initrd /boot/initrd.img-2.6.20-16-generic
title Ubuntu 7.10, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
Ett silleen. Ja koettanut olen liittää kumpaankin esillä olevaan tuona
"locale=fi_FI acpi=force"Kiusaako tuon toisen läsnäolo tuota tallentumista?? Sillä ei tuo ihan ole malli menu.lst mukainen!
Aihe: Ubuntu Gutsy Gibbon ei sammu![taas RATKAISTU] (Luettu 8283 kertaa)
