Fujitsu-Siemens Scaleo J äänet eivät toimi[ratkaistu]

[khaosaming]

Hei, olen uusi Ubuntu-käyttäjä. Asensin XP:n rinnalle Ubuntu 7.10 Gutsy Gibbonin. Ääni ei toimi, muuten kyllä. Kone on Fujitsu-Siemens Scaleo J, jossa AMD Sempron 3000+, sekä Gigabyten emo GA-K8RS482M ATIn piirisarjalla RS48X. Äänikorti  emolla - Realtek HD Audio ALC 880 Azalia.

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:11.0 IDE interface: ATI Technologies Inc 437A Serial ATA Controller (rev 80)
00:12.0 IDE interface: ATI Technologies Inc 4379 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)

dmesg-dumppi ei mahdu, koska "liikaa merkkejä".

[khaosaming]

[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 1151MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5430
[    0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   524272
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   524272
[    0.000000] On node 0 totalpages: 524272
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2303 pages used for memmap
[    0.000000]   HighMem zone: 292593 pages, LIFO batch:31
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F6D20 checksum 0
[    0.000000] ACPI: RSDP 000F6D20, 0014 (r0 GBT   )
[    0.000000] ACPI: RSDT 7FFF3000, 0030 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: FACP 7FFF3040, 0074 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: DSDT 7FFF30C0, 33D5 (r1 GBT    AWRDACPI     1000 MSFT  100000C)
[    0.000000] ACPI: FACS 7FFF0000, 0040
[    0.000000] ACPI: MCFG 7FFF6540, 003C (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: APIC 7FFF64C0, 0068 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ATI board detected. Disabling timer routing over 8254.
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:15 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] Built 1 zonelists.  Total pages: 520177
[    0.000000] Kernel command line: root=UUID=8a3aa70c-5abe-4174-becb-39567c876ca0 ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1795.698 MHz processor.
[   15.323925] Console: colour VGA+ 80x25
[   15.324211] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   15.324693] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   15.393111] Memory: 2067456k/2097088k available (2015k kernel code, 28428k reserved, 916k data, 364k init, 1179584k highmem)
[   15.393122] virtual kernel memory layout:
[   15.393123]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   15.393125]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   15.393126]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   15.393127]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   15.393129]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   15.393130]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[   15.393131]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[   15.393134] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   15.393168] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   15.473155] Calibrating delay using timer specific routine.. 3594.93 BogoMIPS (lpj=7189867)
[   15.473178] Security Framework v1.0.0 initialized
[   15.473183] SELinux:  Disabled at boot.
[   15.473196] Mount-cache hash table entries: 512
[   15.473299] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[   15.473307] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   15.473310] CPU: L2 Cache: 128K (64 bytes/line)
[   15.473312] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[   15.473321] Compat vDSO mapped to ffffe000.
[   15.473331] Checking 'hlt' instruction... OK.
[   15.489253] SMP alternatives: switching to UP code
[   15.489427] Freeing SMP alternatives: 11k freed
[   15.489687] Early unpacking initramfs... done
[   15.822679] ACPI: Core revision 20070126
[   15.822737] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   15.883420] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
[   15.883441] Total of 1 processors activated (3594.93 BogoMIPS).
[   15.883603] ENABLING IO-APIC IRQs
[   15.883784] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   15.923495] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   15.923548] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[   15.923551] ...trying to set up timer as Virtual Wire IRQ... works.
[   16.068920] Brought up 1 CPUs
[   16.069008] Booting paravirtualized kernel on bare hardware
[   16.069081] Time:  8:27:08  Date: 09/29/107
[   16.069101] NET: Registered protocol family 16
[   16.069174] EISA bus registered
[   16.069188] ACPI: bus type pci registered
[   16.101720] PCI: PCI BIOS revision 3.00 entry at 0xfb370, last bus=2
[   16.101722] PCI: Using configuration type 1
[   16.101724] Setting up standard PCI resources
[   16.104532] ACPI: EC: Look up EC in DSDT
[   16.107448] ACPI: Interpreter enabled
[   16.107451] ACPI: (supports S0 S3 S4 S5)
[   16.107464] ACPI: Using IOAPIC for interrupt routing
[   16.110468] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   16.110477] PCI: Probing PCI hardware (bus 00)
[   16.111652] PCI: Transparent bridge - 0000:00:14.4
[   16.111686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   16.111860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[   16.111959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[   16.119102] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[   16.119178] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[   16.119250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[   16.119321] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[   16.119392] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[   16.119464] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11)
[   16.119534] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
[   16.119605] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11)
[   16.119679] Linux Plug and Play Support v0.97 (c) Adam Belay
[   16.119692] pnp: PnP ACPI init
[   16.119702] ACPI: bus type pnp registered
[   16.121070] pnp: PnP ACPI: found 10 devices
[   16.121073] ACPI: ACPI bus type pnp unregistered
[   16.121078] PnPBIOS: Disabled by ACPI PNP
[   16.121120] PCI: Using ACPI for IRQ routing
[   16.121122] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   16.121131] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
[   16.170924] NET: Registered protocol family 8
[   16.170927] NET: Registered protocol family 20
[   16.170991] pnp: 00:01: ioport range 0x140-0x15f has been reserved
[   16.170994] pnp: 00:01: ioport range 0x228-0x22f has been reserved
[   16.170997] pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
[   16.171000] pnp: 00:01: ioport range 0xc00-0xc01 has been reserved
[   16.171003] pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
[   16.171006] pnp: 00:01: ioport range 0xc50-0xc52 has been reserved
[   16.171009] pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved
[   16.171012] pnp: 00:01: ioport range 0xc6f-0xc6f has been reserved
[   16.171022] pnp: 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
[   16.171027] pnp: 00:09: iomem range 0xd0000-0xd7fff has been reserved
[   16.171030] pnp: 00:09: iomem range 0xf0000-0xf7fff could not be reserved
[   16.171033] pnp: 00:09: iomem range 0xf8000-0xfbfff could not be reserved
[   16.171036] pnp: 00:09: iomem range 0xfc000-0xfffff could not be reserved
[   16.172847] Time: tsc clocksource has been installed.
[   16.201278] PCI: Bridge: 0000:00:02.0
[   16.201281]   IO window: a000-afff
[   16.201284]   MEM window: d0000000-d3ffffff
[   16.201287]   PREFETCH window: c0000000-cfffffff
[   16.201291] PCI: Bridge: 0000:00:14.4
[   16.201294]   IO window: b000-bfff
[   16.201301]   MEM window: d5000000-d50fffff
[   16.201305]   PREFETCH window: disabled.
[   16.201320] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   16.201339] NET: Registered protocol family 2
[   16.240849] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   16.240948] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[   16.241995] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   16.242358] TCP: Hash tables configured (established 131072 bind 65536)
[   16.242361] TCP reno registered

[khaosaming]

[   16.252919] checking if image is initramfs... it is
[   16.704618] Switched to high resolution mode on CPU 0
[   16.903165] Freeing initrd memory: 7344k freed
[   16.903471] audit: initializing netlink socket (disabled)
[   16.903481] audit(1193646428.084:1): initialized
[   16.903533] highmem bounce pool size: 64 pages
[   16.905038] VFS: Disk quotas dquot_6.5.1
[   16.905083] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   16.905159] io scheduler noop registered
[   16.905161] io scheduler anticipatory registered
[   16.905163] io scheduler deadline registered
[   16.905178] io scheduler cfq registered (default)
[   16.905186] PCI: MSI quirk detected. MSI deactivated.
[   16.960471] Boot video device is 0000:01:00.0
[   16.960557] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   16.960578] assign_interrupt_mode Found MSI capability
[   16.960580] Allocate Port Service[0000:00:02.0:pcie00]
[   16.960684] isapnp: Scanning for PnP cards...
[   17.315117] isapnp: No Plug & Play device found
[   17.347738] Real Time Clock Driver v1.12ac
[   17.347803] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   17.347927] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.348870] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   17.349482] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   17.349666] input: Macintosh mouse button emulation as /class/input/input0
[   17.349755] PNP: No PS/2 controller found. Probing ports directly.
[   17.352569] serio: i8042 KBD port at 0x60,0x64 irq 1
[   17.352575] serio: i8042 AUX port at 0x60,0x64 irq 12
[   17.352732] mice: PS/2 mouse device common for all mice
[   17.352821] EISA: Probing bus 0 at eisa.0
[   17.352840] Cannot allocate resource for EISA slot 3
[   17.352842] Cannot allocate resource for EISA slot 4
[   17.352862] EISA: Detected 0 cards.
[   17.352940] TCP cubic registered
[   17.352951] NET: Registered protocol family 1
[   17.352971] Using IPI No-Shortcut mode
[   17.353125]   Magic number: 11:975:473
[   17.353437] Freeing unused kernel memory: 364k freed
[   18.608489] AppArmor: AppArmor initialized<5>audit(1193646429.584:2):  type=1505 info="AppArmor initialized" pid=1188
[   18.615429] fuse init (API version 7.
[   18.620753] Failure registering capabilities with primary security module.
[   18.641071] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   19.277205] SCSI subsystem initialized
[   19.290525] libata version 2.21 loaded.
[   19.293851] sata_sil 0000:00:11.0: version 2.2
[   19.293892] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16
[   19.293961] scsi0 : sata_sil
[   19.293998] scsi1 : sata_sil
[   19.294020] ata1: SATA max UDMA/100 cmd 0xf8838080 ctl 0xf883808a bmdma 0xf8838000 irq 16
[   19.294025] ata2: SATA max UDMA/100 cmd 0xf88380c0 ctl 0xf88380ca bmdma 0xf8838008 irq 16
[   19.315718] usbcore: registered new interface driver usbfs
[   19.315740] usbcore: registered new interface driver hub
[   19.315757] usbcore: registered new device driver usb
[   19.353512] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   19.359726] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   19.359731] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   19.436566] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   19.603175] ata1: SATA link down (SStatus 0 SControl 310)
[   19.914987] ata2: SATA link down (SStatus 0 SControl 310)
[   19.915059] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
[   19.915113] scsi2 : sata_sil
[   19.915160] scsi3 : sata_sil
[   19.915181] ata3: SATA max UDMA/100 cmd 0xf88d0080 ctl 0xf88d008a bmdma 0xf88d0000 irq 17
[   19.915186] ata4: SATA max UDMA/100 cmd 0xf88d00c0 ctl 0xf88d00ca bmdma 0xf88d0008 irq 17
[   20.226833] ata3: SATA link down (SStatus 0 SControl 310)
[   20.538677] ata4: SATA link down (SStatus 0 SControl 310)
[   20.538828] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[   20.538842] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   20.539167] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[   20.539191] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd5104000
[   20.599060] usb usb1: configuration #1 chosen from 1 choice
[   20.599211] hub 1-0:1.0: USB hub found
[   20.599225] hub 1-0:1.0: 4 ports detected
[   20.703050] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[   20.703065] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   20.703231] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[   20.703249] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd5105000
[   20.762922] usb usb2: configuration #1 chosen from 1 choice
[   20.763085] hub 2-0:1.0: USB hub found
[   20.763099] hub 2-0:1.0: 4 ports detected
[   20.867053] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[   20.867067] ehci_hcd 0000:00:13.2: EHCI Host Controller
[   20.867278] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[   20.867333] ehci_hcd 0000:00:13.2: irq 18, io mem 0xd5106000
[   21.006443] usb 1-3: new low speed USB device using ohci_hcd and address 2
[   21.006515] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   21.006603] usb usb3: configuration #1 chosen from 1 choice
[   21.006626] hub 3-0:1.0: USB hub found
[   21.006635] hub 3-0:1.0: 8 ports detected
[   21.110560] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[   21.110581] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
[   21.110592] ATIIXP: chipset revision 128
[   21.110594] ATIIXP: not 100% native mode: will probe irqs later
[   21.110603]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
[   21.110619]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
[   21.110628] Probing IDE interface ide0...
[   21.398667] hda: SAMSUNG SP1604N, ATA DISK drive
[   21.818040] usb 3-2: new high speed USB device using ehci_hcd and address 2
[   21.965383] usb 3-2: configuration #1 chosen from 1 choice
[   22.069924] hda: selected mode 0x45
[   22.070042] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   22.088236] Probing IDE interface ide1...
[   22.517760] usbcore: registered new interface driver libusual
[   22.523656] Initializing USB Mass Storage driver...
[   22.821538] usb 2-3: new low speed USB device using ohci_hcd and address 2
[   22.821984] hdc: HL-DT-STDVDRRW GWA-4164B, ATAPI CD/DVD-ROM drive
[   23.026529] usb 2-3: configuration #1 chosen from 1 choice
[   23.157378] hdc: selected mode 0x42
[   23.157655] ide1 at 0x170-0x177,0x376 on irq 15
[   23.161674] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[   23.161679] 8139cp 0000:02:05.0: Try the "8139too" driver instead.
[   23.163281] 8139too Fast Ethernet driver 0.9.28
[   23.163761] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 20
[   23.164648] eth0: RealTek RTL8139 at 0xf8930000, 00:14:85:b6:96:92, IRQ 20
[   23.164652] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[   23.164774] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 17
[   23.220226] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[d5001000-d50017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   23.231380] hda: max request size: 512KiB
[   23.235919] hda: Host Protected Area detected.
[   23.235921]  current capacity is 312579695 sectors (160040 MB)
[   23.235923]  native  capacity is 312581808 sectors (160041 MB)
[   23.236030] hda: Host Protected Area disabled.
[   23.236033] hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
[   23.236277] hda: cache flushes supported
[   23.236318]  hda: hda1 hda2 hda3 < hda5 >
[   23.285914] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[   23.285923] Uniform CD-ROM driver Revision: 3.20
[   23.325317] usb 2-4: new low speed USB device using ohci_hcd and address 3
[   23.536267] usb 2-4: configuration #1 chosen from 1 choice
[   23.564324] usbcore: registered new interface driver hiddev
[   23.564384] scsi4 : SCSI emulation for USB Mass Storage devices
[   23.564416] usb-storage: device found at 2
[   23.564418] usb-storage: waiting for device to settle before scanning
[   23.564446] usbcore: registered new interface driver usb-storage
[   23.564448] USB Mass Storage support registered.
[   23.594730] Attempting manual resume
[   23.594734] swsusp: Resume From Partition 3:5
[   23.594736] PM: Checking swsusp image.
[   23.594925] PM: Resume from disk failed.
[   23.634537] kjournald starting.  Commit interval 5 seconds
[   23.634548] EXT3-fs: mounted filesystem with ordered data mode.
[   23.865017] usb 1-3: new low speed USB device using ohci_hcd and address 3
[   24.067284] usb 1-3: configuration #1 chosen from 1 choice
[   24.074071] input: HID 1267:0103 as /class/input/input1
[   24.074083] input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:13.1-3
[   24.083981] input: HID 1267:0103 as /class/input/input2
[   24.083991] input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:13.1-3
[   24.090042] input: Siam United Hi-Tech. Ltd. SUH USB Keyboard as /class/input/input3
[   24.090051] input: USB HID v1.00 Keyboard [Siam United Hi-Tech. Ltd. SUH USB Keyboard] on usb-0000:00:13.1-4
[   24.100976] input: Siam United Hi-Tech. Ltd. SUH USB Keyboard as /class/input/input4
[   24.100986] input: USB HID v1.00 Device [Siam United Hi-Tech. Ltd. SUH USB Keyboard] on usb-0000:00:13.1-4
[   24.105311] input: HID 0461:4d03 as /class/input/input5
[   24.105326] input: USB HID v1.00 Mouse [HID 0461:4d03] on usb-0000:00:13.0-3
[   24.105338] usbcore: registered new interface driver usbhid
[   24.105341] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   24.492797] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000148500b6de8f]
[   28.558903] usb-storage: device scan complete
[   28.562903] scsi 4:0:0:0: Direct-Access     GENERIC  USB Storage-SMC  I19B PQ: 0 ANSI: 0 CCS
[   28.566889] scsi 4:0:0:1: Direct-Access     GENERIC  USB Storage-CFC  I19B PQ: 0 ANSI: 0 CCS
[   28.570887] scsi 4:0:0:2: Direct-Access     GENERIC  USB Storage-SDC  I19B PQ: 0 ANSI: 0 CCS
[   28.574886] scsi 4:0:0:3: Direct-Access     GENERIC  USB Storage-MSC  I19B PQ: 0 ANSI: 0 CCS
[   30.871302] Linux agpgart interface v0.102 (c) Dave Jones
[   30.963040] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   31.027235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   31.079336] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   31.542631] usbcore: registered new interface driver xpad
[   31.542636] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[   31.997363] nvidia: module license 'NVIDIA' taints kernel.
[   32.419192] input: PC Speaker as /class/input/input6
[   32.435832] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 21
[   32.435842] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   32.436055] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[   32.436830] sd 4:0:0:0: [sda] Attached SCSI removable disk
[   32.485083] sd 4:0:0:1: [sdb] Attached SCSI removable disk
[   32.509540] sd 4:0:0:2: [sdc] Attached SCSI removable disk
[   32.521107] sd 4:0:0:3: [sdd] Attached SCSI removable disk
[   32.638222] sd 4:0:0:0: Attached scsi generic sg0 type 0
[   32.638254] sd 4:0:0:1: Attached scsi generic sg1 type 0
[   32.638282] sd 4:0:0:2: Attached scsi generic sg2 type 0
[   32.638309] sd 4:0:0:3: Attached scsi generic sg3 type 0
[   33.001805] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19
[   33.180365] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
[   33.944732] lp: driver loaded but no devices found
[   34.019520] Adding 3084440k swap on /dev/hda5.  Priority:-1 extents:1 across:3084440k
[   34.440756] EXT3 FS on hda2, internal journal
[   35.443722] No dock devices found.
[   35.643479] input: Power Button (FF) as /class/input/input7
[   35.647902] ACPI: Power Button (FF) [PWRF]
[   35.688161] input: Power Button (CM) as /class/input/input8
[   35.692635] ACPI: Power Button (CM) [PWRB]
[   35.929693] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (version 2.00.00)
[   35.929722] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
[   35.929725] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
[   37.088243] ppdev: user-space parallel port driver
[   37.194540] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   37.369664] audit(1193639249.364:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4873 profile="/usr/sbin/cupsd"
[   37.507900] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   37.507904] apm: overridden by ACPI.
[   37.779381] Failure registering capabilities with primary security module.
[   37.967051] Bluetooth: Core ver 2.11
[   37.967183] NET: Registered protocol family 31
[   37.967185] Bluetooth: HCI device and connection manager initialized
[   37.967189] Bluetooth: HCI socket layer initialized
[   37.998637] Bluetooth: L2CAP ver 2.8
[   37.998641] Bluetooth: L2CAP socket layer initialized
[   38.061430] Bluetooth: RFCOMM socket layer initialized
[   38.061559] Bluetooth: RFCOMM TTY layer initialized
[   38.061562] Bluetooth: RFCOMM ver 1.8
[   42.500994] NET: Registered protocol family 17
[   26.936000] Marking TSC unstable due to: cpufreq changes.
[   26.940000] Time: acpi_pm clocksource has been installed.
[   27.112000] Clocksource tsc unstable (delta = -79644639 ns)
[   31.196000] NET: Registered protocol family 10
[   31.196000] lo: Disabled Privacy Extensions
[   31.448000] hda-intel: Invalid position buffer, using LPIB read method instead.
[   41.744000] eth0: no IPv6 routers present

Kuinkahan pitäisi edetä, jotta saisin äänet toimimaan, vai pitäisikö ostaa jokin (tuettu?) äänikortti? Onko kenelläkään tietoa? Kiitoksia vastauksista.

[juyli]

00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)

Tuo äänipiiri käyttää snd-hda-intel modulia. Onhan se latautunut:

Koodia: [Valitse]

sudo lsmod | grep sndja olet tarkistanut kaikki mikseriasetukset?
Tässä käytyä keskustelua ko. kortin tiimoilta: http://ubuntuforums.org/showthread.php?t=415821&page=3
sudo rmmod snd-hda-intel
sudo modprobe snd-hda-intel probe_mask=8 model=auto
En tiedä, ratkaisisikos tuo Gutsy-ongelmasi?

[khaosaming]

00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)

Tuo äänipiiri käyttää snd-hda-intel modulia. Onhan se latautunut:

Koodia: [Valitse]

sudo lsmod | grep sndja olet tarkistanut kaikki mikseriasetukset?
Tässä käytyä keskustelua ko. kortin tiimoilta: http://ubuntuforums.org/showthread.php?t=415821&page=3
sudo rmmod snd-hda-intel
sudo modprobe snd-hda-intel probe_mask=8 model=auto
En tiedä, ratkaisisikos tuo Gutsy-ongelmasi?

----------------------------------
Kiitos vastauksesta. Loppujen lopuksi asia ratkesi siirtämällä kaiuttimien plugi toiseen reikään tietokoneen äänikortin liitäntäpaneelissa. Mikä toimi Windowsissa, ei toiminutkaan Ubuntussa. Kyseessä siis 5-kanavainen emolle integroitu piiri. Windowsissa ilmeisesti aivan sama, mihin työntää, koska siellä Gigabyten ajuriohjelma kysyy aina, minkä kytkit.