Nyt se sitten toimii todistettavasti ilman erillisiä lisukkeitakin, aivan kuten männävuonnakin.
Asensin puhtaan 32-bittisen Gutsyn läppäriini ja päivittämättä tai ajureita imuroimatta tuon
wvdialconfin kanssa vääntelin aikani säätöjä, kunnes sain toimimaan
wvdialilla.
albert@kompakkigutsyretro:~$ cat /etc/wvdial.conf
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init4 = AT+CGDCONT=1,"IP","internet.saunalahti"
Modem Type = Analog Modem
Phone = *99#
Stupid Mode = 1
ISDN = 0
Password = irrelevant
New PPPD = yes
Username = irrelevant
Modem = /dev/ttyUSB0
Baud = 460800
Dial Command = ATDT
Loki vain näyttää hirmusen rumalta. Osaiskohan joku ammattimies sanoa mitä siinä on pielessä.
albert@kompakkigutsyretro:~$ wvdial
WvDial<*1>: WvDial: Internet dialer version 1.56
WvModem<*1>: Cannot get information for serial port.
WvDial<*1>: Initializing modem.
WvDial<*1>: Sending: ATZ
WvDial Modem<*1>: ATZ
WvDial Modem<*1>: OK
WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: OK
WvDial<*1>: Sending: AT+CGDCONT=1,"IP","internet.saunalahti"
WvDial Modem<*1>: AT+CGDCONT=1,"IP","internet.saunalahti"
WvDial Modem<*1>: OK
WvDial<*1>: Modem initialized.
WvDial<*1>: Sending: ATDT*99#
WvDial<*1>: Waiting for carrier.
WvDial Modem<*1>: ATDT*99#
WvDial Modem<*1>: CONNECT
WvDial<*1>: Carrier detected. Starting PPP immediately.
WvDial<Notice>: Starting pppd at Mon Mar 3 13:48:02 2008
WvDial<Err>: Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
WvDial<Err>: --> PAP (Password Authentication Protocol) may be flaky.
WvDial<Err>: Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
WvDial<Err>: --> CHAP (Challenge Handshake) may be flaky.
WvDial<Notice>: Pid of pppd: 6543
WvDial<*1>: Using interface ppp0
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
WvDial<*1>: local IP address 85.77.231.13
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
WvDial<*1>: remote IP address 10.64.64.64
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
WvDial<*1>: primary DNS address 195.197.54.100
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
WvDial<*1>: secondary DNS address 195.74.0.47
WvDial<*1>: pppd: [18]蝝6][08]��[06][08]
Voipa tietysti järjestelmän päivitykselläkin kaunistua, välttelen vain vielä tärväämästä "orginaalia Gutsyä".
Tuo CHAP ja PAP on vielä tutkimatta... mutta laatu on jo kohtuullisen hyvää...
albert@kompakkigutsyretro:~$ ping www.tiede.fi
PING server2.mederra.com (217.30.188.49) 56(84) bytes of data.
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=1 ttl=50 time=276 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=2 ttl=50 time=278 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=3 ttl=50 time=280 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=4 ttl=50 time=319 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=5 ttl=50 time=280 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=6 ttl=50 time=239 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=7 ttl=50 time=300 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=8 ttl=50 time=260 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=9 ttl=50 time=401 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=10 ttl=50 time=259 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=11 ttl=50 time=297 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=12 ttl=50 time=258 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=13 ttl=50 time=301 ms
64 bytes from server2.mederra.com (217.30.188.49): icmp_seq=14 ttl=50 time=279 ms
--- server2.mederra.com ping statistics ---
14 packets transmitted, 14 received, 0% packet loss, time 12999ms
rtt min/avg/max/mdev = 239.068/288.092/401.197/37.290 ms