Asus H81M-K emolevy & Lämpötilojen monitoroinnin hankaluus

[Sami Mäntysaari]

Hei kaikille pitkästä aikaa,

Onkos tietoa mitenkäs saisi enemmän lämpötiloja ja/tai muuta tietoa ulos?

sensors:

Koodia: [Valitse]

acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +105.0°C)
temp2:        +29.8°C  (crit = +105.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +35.0°C  (high = +80.0°C, crit = +100.0°C)
Core 0:         +33.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:         +32.0°C  (high = +80.0°C, crit = +100.0°C)


[kamara]

lm-sensors

[Sami Mäntysaari]

lm-sensors

En ole noin tyhmä.

sm@Server:~$ sudo apt-get install lm-sensors:

Koodia: [Valitse]

[sudo] password for sm:
Reading package lists... Done
Building dependency tree
Reading state information... Done
lm-sensors is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

sm@Server:~$ sudo sensors-detect:

Koodia: [Valitse]

# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)
# System: ASUS All Series
# Board: ASUSTeK COMPUTER INC. H81M-K

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): YES
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               Yes
Found `Nuvoton NCT5532D/NCT6779D Super IO Sensors'          Success!
    (address 0x290, driver `nct6775')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): YES
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): YES
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): YES
Using driver `i2c-i801' for device 0000:00:1f.3: Intel Lynx Point (PCH)
Module i2c-i801 loaded successfully.
Module i2c-dev loaded successfully.

Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively): YES

Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively): YES

Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively): YES

Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively): YES

Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively): YES

Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively): YES

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `nct6775':
  * ISA bus, address 0x290
    Chip `Nuvoton NCT5532D/NCT6779D Super IO Sensors' (confidence: 9)

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
nct6775
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)YES
Successful!

Monitoring programs won't work until the needed modules are
loaded. You may want to run 'service kmod start'
to load them.

Unloading i2c-dev... OK
Unloading i2c-i801... OK
Unloading cpuid... OK

Manuaalisesti modprobed nämä:

Koodia: [Valitse]

modprobe coretemp
modprobe nct6775

sm@Server:~$ lsmod:

Koodia: [Valitse]

Module                  Size  Used by
nct6775                55222  0
hwmon_vid              12783  1 nct6775
nfnetlink              14606  0
bluetooth             391136  0
eeepc_wmi              13151  0
asus_wmi               24191  1 eeepc_wmi
sparse_keymap          13948  1 asus_wmi
x86_pkg_temp_thermal    14205  0
intel_powerclamp       14705  0
coretemp               13435  0
kvm                   455843  0
crct10dif_pclmul       14289  0
crc32_pclmul           13113  0
ghash_clmulni_intel    13216  0
aesni_intel            55624  0
aes_x86_64             17131  1 aesni_intel
lrw                    13286  1 aesni_intel
gf128mul               14951  1 lrw
glue_helper            13990  1 aesni_intel
ablk_helper            13597  1 aesni_intel
cryptd                 20359  3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_codec_realtek    65812  1
serio_raw              13462  0
lpc_ich                21080  0
i915                  788212  1
mac_hid                13205  0
snd_hda_intel          56531  0
snd_hda_codec         193017  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102099  2 snd_hda_codec,snd_hda_intel
video                  19476  2 i915,asus_wmi
drm_kms_helper         55071  1 i915
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
wmi                    19177  1 asus_wmi
snd_timer              29482  1 snd_pcm
snd                    69322  6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
mei_me                 18627  0
mei                    82276  1 mei_me
soundcore              12680  1 snd
drm                   303102  2 i915,drm_kms_helper
shpchp                 37032  0
i2c_algo_bit           13413  1 i915
lp                     17759  0
parport                42348  1 lp
ahci                   34091  3
psmouse               106692  0
r8169                  71677  0
libahci                32716  1 ahci
mii                    13934  1 r8169

Viimeinen tulos:
sm@Server:~$ sensors

Koodia: [Valitse]

acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +105.0°C)
temp2:        +29.8°C  (crit = +105.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +34.0°C  (high = +80.0°C, crit = +100.0°C)
Core 0:         +34.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:         +32.0°C  (high = +80.0°C, crit = +100.0°C)

nct6779-isa-0290
Adapter: ISA adapter
in0:                    +0.87 V  (min =  +0.00 V, max =  +1.74 V)
in1:                    +1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                    +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                    +3.34 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                    +1.00 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                    +0.00 V  (min =  +0.00 V, max =  +0.00 V)
in6:                    +0.65 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                    +3.28 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                    +1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                   +0.15 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                   +0.13 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                   +0.13 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                   +0.13 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                   +0.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                   915 RPM  (min =    0 RPM)
fan2:                  1004 RPM  (min =    0 RPM)
SYSTIN:                +117.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
CPUTIN:                 +35.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                +46.0°C    sensor = thermistor
AUXTIN1:               +109.0°C    sensor = thermistor
AUXTIN2:               +108.0°C    sensor = thermistor
AUXTIN3:                +17.0°C    sensor = thermal diode
PECI Agent 0:           +34.0°C
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
PCH_CHIP_TEMP:           +0.0°C
PCH_CPU_TEMP:            +0.0°C
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled
(Ei ollut aktivoinut noita ajureita.)

[nm]

(Ei ollut aktivoinut noita ajureita.)

Juu, sensors-detect pitää ajaa itse, että saa kaikki lähteet tunnistettua ja lisättyä tarvittavat moduulit automaattisesti ladattaviksi. Nämä sensoriajurit eivät toimi täysin automaagisesti.

[Sami Mäntysaari]

(Ei ollut aktivoinut noita ajureita.)

Juu, sensors-detect pitää ajaa itse, että saa kaikki lähteet tunnistettua ja lisättyä tarvittavat moduulit automaattisesti ladattaviksi. Nämä sensoriajurit eivät toimi täysin automaagisesti.

Olin aikaisemmin sen ajanutkin, mutta en ollut muistanut ladata niitä. Oops.