Näytä kirjoitukset

Tässä osiossa voit tarkastella kaikkia tämän jäsenen viestejä. Huomaa, että näet viestit vain niiltä alueilta, joihin sinulla on pääsy.


Aiheet - luisfigo

Sivuja: [1]
1
Laitealue / Mikrofoni ei toimi?
« : 17.11.10 - klo:15.51 »
Olen muuttamassa Ruotsiin ja pitäisi äitimuorin koneessa saada mikrofoni toimimaan Skypessä ja muuallakin. Käyttiksenä on Ubuntu 10.10.

Olen kokeillut kaikkia eri vaihtoehtoja ääniasetuksissa eikä siltikään toimi, olisko ideoita millä tuon mikin saisi toimimaan vai onko kyseessä samanlainen ratkaisematon ongelma kuin webcameran käyttäminen messengerissä?

2
Millä ilveellä saan Linux Mint 9:n asennettua ajurit x1800 mobilitylle? Että saisin telkkariin kuvan yms.

Koodia: [Valitse]
janne@janne-laptop ~ $ sudo sh '/home/janne/Lataukset/ati-driver-installer-9-3-x86.x86_64.run'
[sudo] password for janne:
Created directory fglrx-install.PQC7Dv
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.593...
==================================================
 ATI Technologies Linux Driver Installer/Packager
==================================================

Error: ./default_policy.sh does not support version
default:v2:x86_64:lib32::none:2.6.32-21-generic; make sure that the version is being
correctly set by --iscurrentdistro

Removing temporary directory: fglrx-install.PQC7Dv

Tälläistä tämä herjaa? Oon yrittänyt hakea joka puolelta ohjeita muttei vaan tunnu luonaavan millään ilveellä.

3
9.04:ää käynnistäessä se ubuntun latauspalkki tulee normaalisti näkyviin, mutta kun edessä pitäisi olla jo työpöytä niin grafiikka sekoaa ja tulee vain jotain pikselejä näyttöön.
Tämä ongelma taisi alkaa asennettuani Lisää/Poista valikosta XORG:n Ati Radeonille, eli miten saisin tuon oletettavasti huonon uuden ajurin pois RECOVERY-modissa ja taas Ubuntun toimimaan kunnolla?

4
Laitealue / Canon MP540 ongelma Ubuntu 8.10 [Ratkaistu]
« : 11.04.09 - klo:10.03 »
Hei!

Hommasin Canon MP540-monitoimi tulostimen ja Ubuntu 8.10 kyllä tunnistaa sen automaattisesti muttei tulostus kuitenkaan toimi.

-Tulostin näyttää että tulostetaan tietokoneelta, muttei kuitenkaan tulosta.
-Canonin sivuilta löysin MP540_debian_drivers.tar ajurit, mutten saa/osaa asentaa näitä koneelle. Eli miten asennetaan (komennot)?

Ja skanneri olisi myös mukava saada toimimaan.

5
Eli asensin XP:n Vistan tilalle ja nyt käynnistäessä kone ei menekään GRUBiin vaan suoraan windowsiin, olen siis asentanut XP:n vain pelikäyttöön eli Ubuntu toimii oletuksena.

Olen kokeillut asentaa Grubin jo:

sudo grub
find /boot/grub/stage1
(hd1,0)
root (hd1,0)
setup (hd1)
quit

Mutta edelleenkin se menee suoraan windowsiin.

boot/grub/menu.lst on seuraavanlainen:

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=dc153ebb-eec8-41e2-99f2-2480b2fd26e8 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=dc153ebb-eec8-41e2-99f2-2480b2fd26e8

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 8.10, kernel 2.6.27-9-generic
uuid      dc153ebb-eec8-41e2-99f2-2480b2fd26e8
kernel      /boot/vmlinuz-2.6.27-9-generic root=UUID=dc153ebb-eec8-41e2-99f2-2480b2fd26e8 ro quiet splash
initrd      /boot/initrd.img-2.6.27-9-generic
quiet

title      Ubuntu 8.10, kernel 2.6.27-9-generic (recovery mode)
uuid      dc153ebb-eec8-41e2-99f2-2480b2fd26e8
kernel      /boot/vmlinuz-2.6.27-9-generic root=UUID=dc153ebb-eec8-41e2-99f2-2480b2fd26e8 ro  single
initrd      /boot/initrd.img-2.6.27-9-generic

title      Ubuntu 8.10, kernel 2.6.27-7-generic
uuid      dc153ebb-eec8-41e2-99f2-2480b2fd26e8
kernel      /boot/vmlinuz-2.6.27-7-generic root=UUID=dc153ebb-eec8-41e2-99f2-2480b2fd26e8 ro quiet splash
initrd      /boot/initrd.img-2.6.27-7-generic
quiet

title      Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid      dc153ebb-eec8-41e2-99f2-2480b2fd26e8
kernel      /boot/vmlinuz-2.6.27-7-generic root=UUID=dc153ebb-eec8-41e2-99f2-2480b2fd26e8 ro  single
initrd      /boot/initrd.img-2.6.27-7-generic

title      Ubuntu 8.10, memtest86+
uuid      dc153ebb-eec8-41e2-99f2-2480b2fd26e8
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title      Windows Vista/Longhorn (loader)
root      (hd0,0)
savedefault
makeactive
chainloader   +1



Miten muokkaan tuota että saan Ubuntun oletukseksi tai ylipäätään grubin takaisin?

6
AWN asentamisen jälkeen ikkunantoiminnot vasemmalla eikä oikealla puolella ikkunaa.
ELi siis nämä sulku, pienennys ja suurennustoiminnot ikkunassa.

Miten nuo saisi palautettua oikealla paikalleen?

7
Ubuntu 8.10 on käyttiksenä. Ja Realtek ALC880-äänipiirin asennus ei ota toimiakseen. 8.04 Ubuntulla sama ongelma.
Miten saisin äänet kuuluviin?

Olen ihan n00b tämän linuxin kanssa ja muuten olen tykännyt tästä mutta äänien toimimattomuuden takia vaihtuu kohta taas Vistaan takaisin :-\

Sivuja: [1]