Please help Huawei E160 3G only

[UbuntuMan]

Thank you everyone for helping me with my problem! I have now solved it!!!!

I followed the Finnish instructions which I attached to a previous post in this thread above. HOWEVER, I was getting error message. See attachment to this post.

To solve this error I did following:

Open terminal.
Open nautilus by typing "sudo nautilus".
Enter password when prompted.
When the file browser opens, go to the folder usr, then to folder sbin,where you will find the executable
program pppd.
Right click on ppd, go to properties, then go to permissions tab under properties.
There, you will find an option for allowing the program to be run as an executable (I've forgotten the exact
words). There's a check box adjacent to it. If there is a minus (-) sign in this box, click it to change it to a tick
sign. Now permissions are ok and you should be able to use gnomeppp which executes pppd without a
problem.

Then you can also add one of the following 4 commands:

AT^SYSCFG=13,1,3FFFFFFF,2,4 # GPRS only
AT^SYSCFG=2,1,3FFFFFFF,2,4 # GPRS prefered
AT^SYSCFG=14,2,3FFFFFFF,2,4 # 3G ONLY
AT^SYSCFG=2,2,3FFFFFFF,2,4 # 3G prefered

Do not use the pound sign. I.E. "#" !!!

I used first AT^SYSCFG=13,1,3FFFFFFF,2,4 and then connected and Huawei E160 burned green light and worked VERY SLOWLY..... g  p  r  s.....

Then I used AT^SYSCFG=14,2,3FFFFFFF,2,4 for 3G ONLY and only blue light burns now.... So now what is suppose to happen is my stick won't roam between TeleFinland 3G and GPRS... Everytime that happened I had to re-boot stick. HOWEVER, I also had to reboot stick each time I load new AT command line.

Also, user name ans password need to be filled regardless.  You can just enter bogus info.

Hope this helps




[ylläpito on poistanut liitteen]