hei,
tällä kertaa olisi pieni ongelma Buffalo LinkStationin kanssa.
Asemasta ilmeisesti hajosi jotain virtakatkoksen jälkeen, vilkuttaa punaista ja tuuletin on täysillä. Levyt ilmeisesti ok.
Koneessa 2 levyä RAID jotain. Yritin lukea toista levyä telakassa mutta Nautilus ei tunnista levyasemaa. Dmesg antaa seuraavaa:
[418532.296711] usb 1-1.1: USB disconnect, device number 3
[418532.297776] sd 7:0:0:0: [sdc] Synchronizing SCSI cache
[418532.543833] sd 7:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[418897.207008] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[418897.325277] usb 1-1.1: New USB device found, idVendor=152d, idProduct=8561
[418897.325283] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[418897.325286] usb 1-1.1: Product: JMS56x Series
[418897.325288] usb 1-1.1: Manufacturer: JMicron
[418897.325291] usb 1-1.1: SerialNumber: 00A1234567F8
[418897.327102] scsi host7: uas
[418897.328368] scsi 7:0:0:0: Direct-Access SAMSUNG HD502IJ 0107 PQ: 0 ANSI: 6
[418897.330643] sd 7:0:0:0: Attached scsi generic sg2 type 0
[418897.332719] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[418897.333216] sd 7:0:0:0: [sdc] Write Protect is off
[418897.333217] sd 7:0:0:0: [sdc] Mode Sense: 67 00 10 08
[418897.334216] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[418897.370267] sdc: sdc1 sdc2 sdc4 < sdc5 sdc6 >
[418897.374984] sd 7:0:0:0: [sdc] Attached SCSI disk
Miten saan levyn datan kopioitua jonnekin usb-levylle?