Tässä minun .conf tiedoston sisältö.
gksudo gedit /etc/usb_modeswitch.conf
# /etc/usb_modeswitch.conf
#
# Last modified: 2008-10-27
#
# Configuration for usb_modeswitch, a mode switching tool for controlling
# flip flop (multiple device) USB gear
#
# Main purpose is to trigger the switching of several known UMTS modems
# from storage device mode ("ZeroCD TM" for use with MS Windows) to modem
# (serial) device mode
#
# Detailed instructions and a friendly forum on the homepage:
# http://www.draisberghof.de/usb_modeswitch
#
# News update: you want to read the paragraph about troubleshooting there
# if you run into problems !!!
# Just set or remove the comment signs (# and ;) in order to activate
# your device.
#
# For custom settings:
# Numbers can be decimal or hexadecimal, MessageStrings MUST be
# hexadecimal without prepended "0x". Digits 9-16 in the known
# MessageStrings are arbitrary; I set them to "12345678"
# What it all means (command line flags appended):
#
# * DefaultVendor -v <hex number>
# * DefaultProduct -p <hex number>
#
# This is the ID the USB device shows after having been plugged in.
# The program needs this; if not found -> no action.
#
# * TargetVendor -V <hex number>
# * TargetProduct -P <hex number>
#
# This is the ID the USB device after successful mode switching.
# ! From version 0.9.4 just for information purposes !
# Might be useful for testing in future versions
#
# * TargetClass -C <hex number>
#
# Some newer devices don't change IDs but switch device class. If
# the device has the target class -> no action (and vice versa)
#
# * MessageEndpoint -m <hex number>
#
# A kind of address inside the interface to which the "message"
# (the sequence that does the actual switching) is directed
#
# * MessageContent -M <hex string>
#
# A hex string containing the "message" sequence; it will be
# sent as a USB bulk transfer.
#
# * ResponseEndpoint -r <hex number>
# * NeedResponse -n <0/1> OBSOLETE; just give ResponseEndpoint
#
# Some devices were reported to require receiving the response of the
# bulk transfer to do the switching properly. Usually not needed.
#
# * DetachStorageOnly -d <0/1>
#
# Some devices just need to be detached from the usb-storage
# driver to initiate the mode switching. Using this feature
# instead of removing the whole usbstorage module keeps other
# storage devices working.
#
# * HuaweiMode -H <0/1>
#
# Some Huawei devices can be switched by a special control
# message.
#
# * SierraMode -S <0/1>
#
# Some Sierra devices can be switched by a special control
# message.
#
# * SonyMode -O <0/1>
#
# Some Sony-Ericsson devices can be switched by a special control
# message. This is experimental and might not have a stable result
#
# * ResetUSB -R <0/1>
#
# Some devices need a rougher treatment. If the switching seems
# to do something (run udevmonitor), but your system does not reflect
# it, try this somewhat brutal method to do a reset after switching.
# Mind that if your device switched OK before, this will probably set
# it back to storage mode ...
#
# * Interface -i <hex number>
# * Configuration -u <hex number>
# * AltSetting -a <hex number>
#
# More USB parameter to help with tricky devices and for doing lots
# of cruel experiments ...
#
# All other entries are just ignored !
# Additional command line flags:
#
# Verbose output -W
# No output at all -q
# Other config file -c <file>
# For filling in all this information for an unknown device,
# note its Vendor and Product ID after plugging in (usb-storage)
# from /proc/bus/usb/devices (or from the output of "lsusb"), then
# try spying on the USB communication to this device inside a
# Micro$oft OS. Recommended tool: "SniffUSB"
#
# If you find working codes and configurations, please contribute
# them!
#######################################################
# Option GlobeSurfer Icon (aka "Vodafone EasyBox")
#
# The message SHOULD be the same for all Option devices
;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000
;TargetVendor= 0x0af0
;TargetProduct= 0x6600
;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
#######################################################
# Option GlobeSurfer Icon 7.2
#
# Contributor: The Pharscape Forum
;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000
;TargetVendor= 0x0af0
;TargetProduct= 0x6901
;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
########################################################
# Option GlobeTrotter GT MAX 3.6 (aka "T-Mobile Web'n'walk Card Compact II")
#
# Contributor: Bernd Holzmüller
;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000
;TargetVendor= 0x0af0
;TargetProduct= 0x6600
;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
;ResponseEndpoint=0x84
########################################################
# Option GlobeTrotter GT MAX "7.2 Ready"
#
# Contributors: Lucas Benedicic, Morgwai Kotarbinski
;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000
;TargetVendor= 0x0af0
;TargetProduct= 0x6701
;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
########################################################
# Option GlobeTrotter EXPRESS 7.2 (aka "T-Mobile wnw Express II")
#
# Contributor: Fridtjof Busse
;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000
;TargetVendor= 0x0af0
;TargetProduct= 0x6701
;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
# Response reading needed according to one (1) report
;ResponseEndpoint=0x84
#######################################################
# Option GlobeSurfer Icon 7.2, new firmware (HSO driver)
#
# Vendor/ProductID don't change when switching, only the device
# class does.
# HSO driver support is available at Pharscape (www.pharscape.org)
#
# Contributor: Paul Hardwick
;DefaultVendor= 0x0af0
;DefaultProduct= 0x6911
;TargetClass= 0xff
;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000601000000000000000000000000000000"
#######################################################
# Option Icon 225 HSDPA
#
# New Firmware. HSO driver support is available at Pharscape (www.pharscape.org)
#
# Contributor: Matti Viljanen
;DefaultVendor= 0x0af0
;DefaultProduct= 0x6971
;TargetClass= 0xff
;MessageEndpoint=0x05
;MessageContent="55534243785634120100000080000601000000000000000000000000000000"
#######################################################
# Option GlobeTrotter HSUPA Modem (aka "T-Mobile Web'n'walk Card Compact III')
#
# New Firmware. HSO driver support is available at Pharscape (www.pharscape.org)
#
# Contributor: Gerold Gruber
;DefaultVendor= 0x0af0
;DefaultProduct= 0x7011
;TargetClass= 0xff
;MessageEndpoint=0x05
;MessageContent="55534243785634120100000080000601000000000000000000000000000000"
########################################################
# AT&T USBConnect Quicksilver (made by Option, HSO driver)
#
# Contributor: sissie from Bullteam
;DefaultVendor= 0x0af0
;DefaultProduct= 0xd033
;TargetClass= 0xff
;MessageEndpoint=0x05
;MessageContent="55534243785634120100000080000601000000000000000000000000000000"
########################################################
# Huawei E220 (aka "Vodafone EasyBox II", aka "T-Mobile wnw Box Micro")
# Huawei E270
# Huawei E870
# and probably most other Huawei devices (just adapt product ID)
#
# Two options: 1. removal of "usb-storage" 2. the special control
# message found by Miroslav Bobovsky
#
# Contributor: Hans Kurent, Denis Sutter
;DefaultVendor= 0x12d1;
;DefaultProduct= 0x1003
# choose one of these:
;DetachStorageOnly=1
;HuaweiMode=1
########################################################
# Huawei E169
#
# Contributor: Dale Lane
;DefaultVendor= 0x12d1;
;DefaultProduct= 0x1001
# choose one of these:
;DetachStorageOnly=1
;HuaweiMode=1
########################################################
# Huawei E630
#
# You might also try to use the new Huawei sequence with it
#
# Beware: there are modem-only variants around - no storage,
# no switching necessary!
#
# Contributor: Joakim Wenrgren
;DefaultVendor= 0x1033
;DefaultProduct= 0x0035
;TargetVendor= 0x12d1
;TargetProduct= 0x1003
;DetachStorageOnly=1
########################################################
# ZTE MF620 (aka "Onda MH600HS")
#
# Probably works with DetachStorageOnly too
#
# Contributor: Flávio Moringa
;DefaultVendor= 0x19d2
;DefaultProduct= 0x2000
;TargetVendor= 0x19d2
;TargetProduct= 0x0001
;MessageEndpoint=0x04
;MessageContent="55534243123456780000000000000600000000000000000000000000000000"
########################################################
# ZTE MF622 (aka "Onda MDC502HS")
#
# Contributor: "andylog"
;DefaultVendor= 0x19d2
;DefaultProduct= 0x2000
;TargetVendor= 0x19d2
;TargetProduct= 0x0002
;MessageEndpoint=0x04
;MessageContent="55534243f8f993882000000080000a85010101180101010101000000000000"
########################################################
# ZTE MF622 (probably different version)
#
# Contributor: Pedro Algarvio
;DefaultVendor= 0x19d2
;DefaultProduct= 0x2000
;TargetVendor= 0x19d2
;TargetProduct= 0x0001
;DetachStorageOnly=1
########################################################
# ZTE MF628
#
# Captured with "usbmon". Has a micro SD slot which can be
# activated alternatively
#
# Contributor: Alvaro Lopes <alvieboy at alvie dot com>
;DefaultVendor= 0x19d2
;DefaultProduct= 0x2000
# To modem mode:
;TargetVendor= 0x19d2
;TargetProduct= 0x0015
;MessageEndpoint=0x08
;MessageContent="5553424312345678000000000000061b000000030000000000000000000000"
# To SD slot mode:
;TargetVendor= 0x05c6
;TargetProduct= 0x2001
;MessageEndpoint=0x08
;MessageContent="55534243123456782000000080000a86010101180101010101000000000000"
;ResponseEndpoint=7
########################################################
# ZTE MF628+ (tested version from Telia / Sweden)
# ZTE MF626
#
# Contributor: Joakim Wennergren
;DefaultVendor= 0x19d2
;DefaultProduct= 0x2000
;TargetVendor= 0x19d2
;TargetProduct= 0x0031
;MessageEndpoint=0x01
;MessageContent="55534243123456782000000080000c85010101180101010101000000000000"
########################################################
# ZTE MF638 (aka "Onda MDC525UP")
#
# Contributor: "andylog"
;DefaultVendor= 0x19d2
;DefaultProduct= 0x2000
;TargetVendor= 0x19d2
;TargetProduct= 0x0037
;MessageEndpoint=0x01
;MessageContent="55534243123456782000000080000c85010101180101010101000000000000"
########################################################
# ONDA MT503HS (most likely a ZTE model)
#
# Contributor: Lucio Asnaghi a.k.a. kRAkEn/gORe
;DefaultVendor= 0x19d2
;DefaultProduct= 0x2000
;TargetVendor= 0x19d2
;TargetProduct= 0x0002
;MessageEndpoint=0x08
;MessageContent="55534243b0c8dc812000000080000a85010101180101010101000000000000"
########################################################
# ONDA MT505UP (most likely a ZTE model)
#
# Contributor: Alex Scortegagna
;DefaultVendor= 0x19d2
;DefaultProduct= 0x2000
;TargetVendor= 0x19d2
;TargetProduct= 0x0002
;MessageEndpoint=0x03
;MessageContent="55534243123456780000010080000a28000000001c00002000000000000000"
########################################################
# Novatel Wireless Ovation MC950D HSUPA
# Novatel Wireless Merlin XU950D
# Novatel Wireless Ovation 930D
#
# Contributor: Razvan Dragomirescu, Mike Kirk
;DefaultVendor= 0x1410
;DefaultProduct= 0x5010
;TargetVendor= 0x1410
;TargetProduct= 0x4400
;MessageEndpoint=0x09
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
# Note: detaching the storage driver might work as well
########################################################
# Novatel U727 USB modem
#
# Modem only versions (no switching required) are around.
#
# Contributor: Chris Thielen
;DefaultVendor= 0x1410
;DefaultProduct= 0x5010
;TargetVendor= 0x1410
;TargetProduct= 0x4100
;MessageEndpoint=0x08
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
########################################################
# Novatel MC990D
#
# Contributor: Joakim Wennergren
;DefaultVendor= 0x1410
;DefaultProduct= 0x5020
;Interface= 5
;MessageEndpoint=0x01
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
########################################################
# Alcatel OT-X020 (aka MBD-100HU, aka Nuton 3.5G), works with Emobile D11LC
#
# Contributor: Aleksandar Samardzic
;DefaultVendor= 0x1c9e
;DefaultProduct= 0x1001
;TargetVendor= 0x1c9e
;TargetProduct= 0x6061
;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000606f50402527000000000000000000000"
########################################################
# AnyDATA ADU-500A, ADU-510A, ADU-520A
#
# Contributor: Vladimir Poluektov
;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000
;TargetVendor= 0x16d5
;TargetProduct= 0x6502
;MessageEndpoint=0x08
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
########################################################
# BandLuxe C120
#
# Reportedly needs several switch calls in a certain order. See
# http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=71
# This might be a case to try the new ResetUSB function
#
# Contributor: Alexander Czigler
;DefaultVendor= 0x1a8d
;DefaultProduct= 0x1000
;TargetVendor= 0x1a8d
;TargetProduct= 0x1002
;MessageEndpoint=0x05
;MessageContent="55534243123456781200000080000603000000020000000000000000000000"
;ResponseEndpoint=0x82
########################################################
# Solomon S3Gm-660
#
# Same notes apply as with the BandLuxe C120 above
#
# Contributor: Alexander Czigler
;DefaultVendor= 0x1dd6
;DefaultProduct= 0x1000
;TargetVendor= 0x1dd6
;TargetProduct= 0x1002
;MessageEndpoint=0x05
;MessageContent="55534243123456781200000080000603000000020000000000000000000000"
;ResponseEndpoint=0x82
########################################################
# C-motech D-50 (aka "CDU-680")
#
# Interesting notes about the device in the forum post at
# http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=69
#
# Contributor: Alexander Czigler
;DefaultVendor= 0x16d8
;DefaultProduct= 0x6803
;TargetVendor= 0x16d8
;TargetProduct= 0x6803
;MessageEndpoint=0x07
;MessageContent="555342431234567824000000800008ff524445564348470000000000000000"
########################################################
# C-motech CGU-628 (aka "Franklin Wireless CGU-628A" aka "4G Systems XS Stick W12")
#
# Contributor: Mathias Picker
;DefaultVendor= 0x16d8
;DefaultProduct= 0xf000
;TargetVendor= 0x16d8
;TargetProduct= 0x6006
;MessageEndpoint=0x09
;MessageContent="55534243d85dd88524000000800008ff524445564348470000000000000000"
########################################################
# Toshiba G450
#
# Contributor: Mijail Anton
;DefaultVendor= 0x0930
;DefaultProduct= 0x0d46
;TargetVendor= 0x0930
;TargetProduct= 0x0d45
;MessageEndpoint=0x05
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
########################################################
# UTStarcom UM175 (distributor "Alltel")
#
# Contributor: Mark A. Ziesemer
;DefaultVendor= 0x106c
;DefaultProduct= 0x3b03
;TargetVendor= 0x106c
;TargetProduct= 0x3715
;MessageEndpoint=0x05
;MessageContent="555342431234567824000000800008ff024445564348470000000000000000"
########################################################
# Hummer DTM5731
#
# Contributor: "paul"
;DefaultVendor= 0x1ab7
;DefaultProduct= 0x5700
;TargetVendor= 0x1ab7
;TargetProduct= 0x5731
;MessageEndpoint=0x07
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
########################################################
# A-Link 3GU
#
# Contributor: A-Link Europe Ltd.
;DefaultVendor= 0x1e0e
;DefaultProduct= 0xf000
;TargetVendor= 0x1e0e
;TargetProduct= 0x9200
;MessageEndpoint=0x01
;MessageContent="5553424312345678000000000000061b000000020000000000000000000000"
########################################################
# Sierra Wireless AirCard 881U (most likely 880U too)
#
# Contributor: Vincent Teoh
;DefaultVendor= 0x1199
;DefaultProduct= 0x0fff
;TargetVendor= 0x1199
;TargetProduct= 0x6856
;SierraMode=1
########################################################
# Sony Ericsson MD400
#
# This is experimental. Might reset after some time. Please report!
;DefaultVendor= 0x0fce
;DefaultProduct= 0xd0e1
;TargetClass= 0x02
;SonyMode=1
# This might work too instead; subject to testing
;Configuration=2
########################################################
# LG LDU-1900D EV-DO (Rev. A)
#
# Recommended init command: ATE0V1&D2&C1S0=0
#
# Contributor: Jérôme Oufella
;DefaultVendor= 0x1004
;DefaultProduct= 0x1000
;MessageEndpoint=0x08
;MessageContent="55534243123456780000000000000aff554d53434847000000000000000000"
########################################################
# Samsung SGH-Z810 USB (with microSD card)
#
# After switching the usb-storage binds to the microSD card
#
# Contributor: A Friend
;DefaultVendor= 0x05c6
;DefaultProduct= 0x1000
;TargetVendor= 0x04e8
;TargetProduct= 0x6601
;MessageEndpoint=0x05
;MessageContent="55534243123456780000000000000616000000000000000000000000000000"
# Huawei E180
DefaultVendor= 0x12d1
DefaultProduct= 0x1446
MessageEndpoint = 0x01
MessageContent="55534243000000000000000000000011060000000000000000000000000000"
Aihe: dna mokkula huawei E180 ei toimi jelppii (Luettu 6478 kertaa)
