Armada E500 satunnainen boottikaatuminen (ratkaistu asentamalla 8.10)

[jussike]

Mistähän voisi tällainen johtua:
Bootti kaatuu satunnaisesti kohtaan "Loading, please wait..."?
Bootin onnistuessa seuraava rivi on "kinit resume...jne"

Kone:
Compaq Armada E500 700MHz/256MB/80GB
Käyttöjärjestelmä:
Ubuntu 8.04.1 CLI + asennusskriptillä asennettu Crunchbang 8.04.2

Swappia on 2GB levyn alussa ja UUID:t tarkistettu swapin ja resumen osalta.

Tässä nyt ainakin lspci. Voin pasteta muitakin tulosteita.

Koodia: [Valitse]

jussi@e500:~$ lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:04.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
00:04.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10)
00:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
00:09.1 Serial controller: Agere Systems LT WinModem
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
02:00.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
jussi@e500:~$


[jussike]

tässäpä dmesg

Koodia: [Valitse]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-22-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Nov 24 18:32:42 UTC 2008 (Ubuntu 2.6.24-22.45-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[    0.000000]  BIOS-e820: 000000000fff0000 - 000000000fff3800 (reserved)
[    0.000000]  BIOS-e820: 000000000fff3800 - 0000000010000000 (ACPI NVS)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 255MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 65520) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->    65520
[    0.000000]   HighMem     65520 ->    65520
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->    65520
[    0.000000] On node 0 totalpages: 65520
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 479 pages used for memmap
[    0.000000]   Normal zone: 60945 pages, LIFO batch:15
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F9970 checksum 0
[    0.000000] ACPI: RSDP 000F9970, 0014 (r0 COMPAQ)
[    0.000000] ACPI: RSDT 0FFF4800, 0028 (r1 COMPAQ RSDTBL          1 CPQ         1)
[    0.000000] ACPI: FACP 0FFF4828, 0074 (r1 COMPAQ CPQB151  20020315 CPQ         1)
[    0.000000] ACPI: DSDT 0FFF48A0, 6886 (r1 COMPAQ ARMADAE7    10000 MSFT  100000C)
[    0.000000] ACPI: FACS 0FFFFE80, 0040
[    0.000000] ACPI: PM-Timer IO Port: 0x5008
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:f0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65009
[    0.000000] Kernel command line: root=UUID=c9181b37-4f02-44d4-8f55-d0e75470e3a6 ro quiet lapic
[    0.000000] Local APIC disabled by BIOS -- reenabling.
[    0.000000] Could not enable APIC!
[    0.000000] mapped APIC to ffffb000 (0120c000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[    0.000000] Detected 547.190 MHz processor.
[   21.470218] Console: colour VGA+ 80x25
[   21.470233] console [tty0] enabled
[   21.470721] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[   21.471274] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[   21.500446] Memory: 247556k/262080k available (2177k kernel code, 14056k reserved, 1005k data, 368k init, 0k highmem)
[   21.500476] virtual kernel memory layout:
[   21.500480]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   21.500486]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   21.500491]     vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
[   21.500496]     lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
[   21.500501]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   21.500506]       .data : 0xc0320704 - 0xc041bdc4   (1005 kB)
[   21.500511]       .text : 0xc0100000 - 0xc0320704   (2177 kB)
[   21.500524] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   21.500623] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   21.580645] Calibrating delay using timer specific routine.. 1095.64 BogoMIPS (lpj=2191281)
[   21.580724] Security Framework initialized
[   21.580747] SELinux:  Disabled at boot.
[   21.580791] AppArmor: AppArmor initialized
[   21.580805] Failure registering capabilities with primary security module.
[   21.580833] Mount-cache hash table entries: 512
[   21.581179] Initializing cgroup subsys ns
[   21.581192] Initializing cgroup subsys cpuacct
[   21.581218] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   21.581255] CPU: L1 I cache: 16K, L1 D cache: 16K
[   21.581264] CPU: L2 cache: 256K
[   21.581275] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
[   21.581309] Compat vDSO mapped to ffffe000.
[   21.581348] Checking 'hlt' instruction... OK.
[   21.597455] SMP alternatives: switching to UP code
[   21.602026] Freeing SMP alternatives: 11k freed
[   21.602423] Early unpacking initramfs... done
[   22.878726] ACPI: Core revision 20070126
[   22.879118] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   22.886668] ACPI: setting ELCR to 0200 (from 0800)
[   22.890492] CPU0: Intel Pentium III (Coppermine) stepping 03
[   22.890512] SMP motherboard not detected.
[   22.890520] Local APIC not detected. Using dummy APIC emulation.
[   22.890674] Brought up 1 CPUs
[   22.890737] CPU0 attaching sched-domain:
[   22.890746]  domain 0: span 01
[   22.890753]   groups: 01
[   22.891379] net_namespace: 64 bytes
[   22.891409] Booting paravirtualized kernel on bare hardware
[   22.893418] Time: 15:54:28  Date: 12/26/08
[   22.893514] NET: Registered protocol family 16
[   22.894299] EISA bus registered
[   22.894328] ACPI: bus type pci registered
[   22.898662] PCI: PCI BIOS revision 2.10 entry at 0xf0478, last bus=1
[   22.898673] PCI: Using configuration type 1
[   22.898703] Setting up standard PCI resources
[   22.906615] ACPI: EC: Look up EC in DSDT
[   22.936966] ACPI: Interpreter enabled
[   22.936981] ACPI: (supports S0 S1 S3 S4 S5)
[   22.937037] ACPI: Using PIC for interrupt routing
[   22.963370] ACPI: PCI Root Bridge [C005] (0000:00)
[   22.963990] PCI quirk: region 5000-503f claimed by PIIX4 ACPI
[   22.964003] PCI quirk: region 4000-400f claimed by PIIX4 SMB
[   22.964019] PIIX4 devres I PIO at 00e0-00e3
[   22.964029] PIIX4 devres J PIO at 00f8-00fb
[   22.964969] ACPI: PCI Interrupt Routing Table [\_SB_.C005._PRT]
[   22.982498] ACPI: PCI Interrupt Link [C142] (IRQs *11)
[   22.982962] ACPI: PCI Interrupt Link [C148] (IRQs 11) *0, disabled.
[   22.983487] ACPI: PCI Interrupt Link [C149] (IRQs *11)
[   22.984008] ACPI: PCI Interrupt Link [C14A] (IRQs *11)
[   22.984512] ACPI: Power Resource [C129] (on)
[   22.984649] ACPI: Power Resource [C0DB] (on)
[   22.986553] ACPI: Power Resource [C15F] (off)
[   22.988594] ACPI: Power Resource [C161] (off)
[   22.990589] ACPI: Power Resource [C163] (off)
[   22.990772] Linux Plug and Play Support v0.97 (c) Adam Belay
[   22.990895] pnp: PnP ACPI init
[   22.990926] ACPI: bus type pnp registered
[   23.032474] pnp: PnP ACPI: found 15 devices
[   23.032485] ACPI: ACPI bus type pnp unregistered
[   23.032498] PnPBIOS: Disabled by ACPI PNP
[   23.033419] PCI: Using ACPI for IRQ routing
[   23.033431] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   23.092416] NET: Registered protocol family 8
[   23.092424] NET: Registered protocol family 20
[   23.092654] AppArmor: AppArmor Filesystem Enabled
[   23.096387] Time: tsc clocksource has been installed.
[   23.104577] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[   23.104590] system 00:0c: ioport range 0x800-0x87f has been reserved
[   23.104602] system 00:0c: ioport range 0x4000-0x400f has been reserved
[   23.104614] system 00:0c: ioport range 0x5000-0x5063 could not be reserved
[   23.104626] system 00:0c: ioport range 0x6004-0x6005 has been reserved
[   23.104636] system 00:0c: ioport range 0xf000-0xf0cf has been reserved
[   23.104663] system 00:0d: iomem range 0xd1800-0xd3fff has been reserved
[   23.104676] system 00:0d: iomem range 0xfff80000-0xffffffff has been reserved
[   23.104701] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[   23.104712] system 00:0e: iomem range 0xf0000-0xfffff could not be reserved
[   23.104724] system 00:0e: iomem range 0x100000-0xfffffff could not be reserved
[   23.136357] PCI: Bridge: 0000:00:01.0
[   23.136367]   IO window: 2000-2fff
[   23.136391]   MEM window: 40000000-410fffff
[   23.136401]   PREFETCH window: 30000000-300fffff
[   23.136413] PCI: Bus 2, cardbus bridge: 0000:00:04.0
[   23.136421]   IO window: 00001000-000010ff
[   23.136430]   IO window: 00001400-000014ff
[   23.136440]   PREFETCH window: 20000000-23ffffff
[   23.136450]   MEM window: 24000000-27ffffff
[   23.136460] PCI: Bus 6, cardbus bridge: 0000:00:04.1
[   23.136467]   IO window: 00001800-000018ff
[   23.136476]   IO window: 00001c00-00001cff
[   23.136486]   PREFETCH window: 28000000-2bffffff
[   23.136496]   MEM window: 2c000000-2fffffff
[   23.137396] ACPI: PCI Interrupt Link [C142] enabled at IRQ 11
[   23.137407] PCI: setting IRQ 11 as level-triggered
[   23.137416] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [C142] -> GSI 11 (level, low) -> IRQ 11
[   23.137454] ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [C142] -> GSI 11 (level, low) -> IRQ 11
[   23.137506] NET: Registered protocol family 2
[   23.176664] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[   23.177521] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[   23.177719] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[   23.177916] TCP: Hash tables configured (established 8192 bind 8192)
[   23.177925] TCP reno registered
[   23.188831] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[   24.315999]  it is
[   25.639620] Freeing initrd memory: 7661k freed
[   25.641417] audit: initializing netlink socket (disabled)
[   25.641459] audit(1230306871.144:1): initialized
[   25.649993] VFS: Disk quotas dquot_6.5.1
[   25.650322] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   25.650861] io scheduler noop registered
[   25.650871] io scheduler anticipatory registered
[   25.650878] io scheduler deadline registered
[   25.650936] io scheduler cfq registered (default)
[   25.650963] Limiting direct PCI/PCI transfers.
[   25.651023] PCI: Firmware left 0000:00:09.0 e100 interrupts enabled, disabling
[   25.651047] Boot video device is 0000:01:00.0


Vehkeessä on ilmeisesti buginen DSDT, mutta ei valmista failia tarjolla... Noh kyllä sitä näinkin voi käyttää ihan hyvin

[jussike]

Vähän lisää vielä

Koodia: [Valitse]

[   25.652054] isapnp: Scanning for PnP cards...
[   26.005575] isapnp: No Plug & Play device found
[   26.133740] Real Time Clock Driver v1.12ac
[   26.134089] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   26.134339] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   26.136263] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   26.138119] ACPI: PCI Interrupt Link [C149] enabled at IRQ 11
[   26.138133] ACPI: PCI Interrupt 0000:00:09.1[A] -> Link [C149] -> GSI 11 (level, low) -> IRQ 11
[   26.141463] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   26.141728] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   26.142121] PNP: PS/2 Controller [PNP0303:C0D8,PNP0f0e:C0D9] at 0x60,0x64 irq 1,12
[   26.144391] i8042.c: Detected active multiplexing controller, rev 1.0.
[   26.145488] serio: i8042 KBD port at 0x60,0x64 irq 1
[   26.145505] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   26.145515] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   26.145525] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   26.145535] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   26.148021] mice: PS/2 mouse device common for all mice
[   26.148452] EISA: Probing bus 0 at eisa.0
[   26.148469] Cannot allocate resource for EISA slot 1
[   26.148479] Cannot allocate resource for EISA slot 2
[   26.148487] Cannot allocate resource for EISA slot 3
[   26.148495] Cannot allocate resource for EISA slot 4
[   26.148503] Cannot allocate resource for EISA slot 5
[   26.148511] Cannot allocate resource for EISA slot 6
[   26.148528] EISA: Detected 0 cards.
[   26.148538] cpuidle: using governor ladder
[   26.148545] cpuidle: using governor menu
[   26.149101] NET: Registered protocol family 1
[   26.149204] Using IPI No-Shortcut mode
[   26.149307] registered taskstats version 1
[   26.149600]   Magic number: 4:473:943
[   26.149726]   hash matches device ptyye
[   26.149799]   hash matches device tty0
[   26.149805]   hash matches device console
[   26.149863] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   26.149871] EDD information not available.
[   26.151179] Freeing unused kernel memory: 368k freed
[   26.151316] Write protecting the kernel read-only data: 801k
[   26.171946] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   26.775259] fuse init (API version 7.9)
[   26.843246] ACPI: Transitioning device [C15D] to D3
[   26.843259] ACPI: Transitioning device [C15D] to D3
[   26.843274] ACPI: Fan [C15D] (off)
[   26.848261] ACPI: Transitioning device [C160] to D3
[   26.848270] ACPI: Transitioning device [C160] to D3
[   26.848282] ACPI: Fan [C160] (off)
[   26.852095] ACPI: Transitioning device [C162] to D3
[   26.852104] ACPI: Transitioning device [C162] to D3
[   26.852116] ACPI: Fan [C162] (off)
[   26.880836] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   26.880856] ACPI: Processor [C0B4] (supports 8 throttling states)
[   26.897441] ACPI: Thermal Zone [C15E] (44 C)
[   29.670490] SCSI subsystem initialized
[   29.910833] usbcore: registered new interface driver usbfs
[   29.910909] usbcore: registered new interface driver hub
[   29.935873] usbcore: registered new device driver usb
[   30.191090] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[   30.191104] e100: Copyright(c) 1999-2006 Intel Corporation
[   30.191264] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [C149] -> GSI 11 (level, low) -> IRQ 11
[   30.314511] libata version 3.00 loaded.
[   30.346644] Floppy drive(s): fd0 is 1.44M
[   30.374577] USB Universal Host Controller Interface driver v3.0
[   30.705698] e100: eth0: e100_probe: addr 0x41280000, irq 11, MAC addr 00:d0:59:2b:0a:9a
[   30.706736] ACPI: PCI Interrupt Link [C14A] enabled at IRQ 11
[   30.706749] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [C14A] -> GSI 11 (level, low) -> IRQ 11
[   30.706781] uhci_hcd 0000:00:07.2: UHCI Host Controller
[   30.707373] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[   30.707427] uhci_hcd 0000:00:07.2: irq 11, io base 0x00003400
[   30.707929] usb usb1: configuration #1 chosen from 1 choice
[   30.708018] hub 1-0:1.0: USB hub found
[   30.708040] hub 1-0:1.0: 2 ports detected
[   30.829310] ata_piix 0000:00:07.1: version 2.12
[   30.832385] scsi0 : ata_piix
[   30.835229] scsi1 : ata_piix
[   30.835538] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x3420 irq 14
[   30.835550] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x3428 irq 15
[   31.179332] ata1.00: ATA-6: ST980815A,  3.ALE, max UDMA/100
[   31.179348] ata1.00: 156301488 sectors, multi 16: LBA48
[   31.179424] ata1.01: ATAPI: CD-224E, 9.0B, max MWDMA2
[   31.196001] ata1.00: configured for UDMA/33
[   31.398651] ata1.01: configured for MWDMA2
[   31.398755] ata2: port disabled. ignoring.
[   31.399144] scsi 0:0:0:0: Direct-Access     ATA      ST980815A        n/a  PQ: 0 ANSI: 5
[   31.408358] scsi 0:0:1:0: CD-ROM            COMPAQ   CD-224E          9.0B PQ: 0 ANSI: 5
[   32.430946] Driver 'sd' needs updating - please use bus_type methods
[   32.444103] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   32.444161] sd 0:0:0:0: [sda] Write Protect is off
[   32.444173] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   32.444254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.444435] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   32.444483] sd 0:0:0:0: [sda] Write Protect is off
[   32.444493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   32.444572] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.444591]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   32.470777]  sda1 sda2 sda3
[   32.471333] sd 0:0:0:0: [sda] Attached SCSI disk
[   32.496747] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   32.496821] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   32.529979] sr0: scsi3-mmc drive: 24x/24x xa/form2 cdda tray
[   32.529995] Uniform CD-ROM driver Revision: 3.20
[   32.530170] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   32.629902] Clocksource tsc unstable (delta = -147514064 ns)
[   32.633874] Time: acpi_pm clocksource has been installed.
[   32.766421] floppy0: no floppy controllers found
[   32.866419] Attempting manual resume
[   32.866432] swsusp: Resume From Partition 8:1
[   32.866439] PM: Checking swsusp image.
[   32.866818] PM: Resume from disk failed.
[   32.945170] kjournald starting.  Commit interval 5 seconds
[   32.945207] EXT3-fs: mounted filesystem with ordered data mode.
[   38.999695] Floppy drive(s): fd0 is 1.44M
[   39.151020] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   40.170668] Synaptics Touchpad, model: 1, fw: 5.6, id: 0x165eb1, caps: 0x804713/0x0
[   40.220498] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3
[   42.011559] floppy0: no floppy controllers found
[   43.211321] irda_init()
[   43.211379] NET: Registered protocol family 23
[   43.340369] parport_pc 00:04: reported by Plug and Play ACPI
[   43.340416] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   43.543263] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   43.623345] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   43.703154] Linux agpgart interface v0.102
[   44.035185] Yenta: CardBus bridge found at 0000:00:04.0 [0e11:b121]
[   44.035219] Yenta: Using CSCINT to route CSC interrupts to PCI
[   44.035227] Yenta: Routing CardBus interrupts to PCI
[   44.035239] Yenta TI: socket 0000:00:04.0, mfunc 0x01001c72, devctl 0x64
[   44.267521] Yenta: ISA IRQ mask 0x0478, PCI irq 11
[   44.267534] Socket status: 30000020
[   44.359277] Yenta: CardBus bridge found at 0000:00:04.1 [0e11:b121]
[   44.359307] Yenta: Using CSCINT to route CSC interrupts to PCI
[   44.359315] Yenta: Routing CardBus interrupts to PCI
[   44.359327] Yenta TI: socket 0000:00:04.1, mfunc 0x01001c72, devctl 0x64
[   44.490935] Linux video capture interface: v2.00
[   44.575066] found SMC SuperIO Chip (devid=0x0a rev=00 base=0x00e0): FDC37N971
[   44.575099] smsc_ircc_present(), addr 0x0100 - no device found!
[   44.591432] Yenta: ISA IRQ mask 0x0478, PCI irq 11
[   44.591445] Socket status: 30000006
[   44.683373] agpgart: Detected an Intel 440BX Chipset.
[   44.689022] agpgart: AGP aperture is 64M @ 0x50000000
[   44.689121] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[   44.746993] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [C149] -> GSI 11 (level, low) -> IRQ 11
[   44.747106] videodev: "Maestro radio" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
[   44.879132] maestro_radio: probe of 0000:00:08.0 failed with error -5
[   44.994698] pccard: CardBus card inserted into slot 0
[   45.876189] input: Power Button (FF) as /devices/virtual/input/input4
[   45.906657] ACPI: Power Button (FF) [PWRF]
[   45.906994] input: Sleep Button (CM) as /devices/virtual/input/input5
[   45.930635] ACPI: Sleep Button (CM) [C057]
[   45.930899] input: Lid Switch as /devices/virtual/input/input6
[   45.947049] ACPI: Lid Switch [C16B]
[   46.042760] ACPI: AC Adapter [C0F6] (off-line)
[   46.454289] ACPI: Battery Slot [C0FE] (battery present)
[   46.454628] ACPI: Battery Slot [C0FF] (battery absent)
[   46.454931] ACPI: Battery Slot [C100] (battery absent)


[jussike]

Asensin Crunchbang Intrepidin ja tämä näyttää kaikin puolin paremmalta ratkaisulta tähän koneeseen. Vielä ei ole samoja ongelmia ilmennyt.