Ubuntu ei käynnisty aina [ratkaistu]

[nawitus]

Noin puolet ajasta Ubuntu ei käynnisty, mutta sillon kuin se käynnistyy se toimii täysin. Ongelma esiintyy 7.4 ja 7.10 versioilla (tällä hetkellä gutsy käytössä). Noapic ja nolapic boottiparametrit ovat käytössä, ja myös irqfixup, nodma yms eikä ne auta ongelmaan. Käytössä HP Pavilion dv6544eo läppäri, lisätietoja:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01124008&lc=en&cc=us&dlc=en&product=3545202&rule=13685&lang=en

Käynnistys jää tyypillisesti tälläiseen tilaan, vaikka tekstit välillä vaihtelevat.. usein jää SATA link down tekstit..



Olen muokannut /etc/fstab ja /boot/grub/menu.lst tiedostoista UUID:t pois mutta sekään ei muuta tilannetta mitenkään.

Koodia: [Valitse]

~ $ sudo fdisk -l

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc23d5aee

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        9740    78236518+   7  HPFS/NTFS
/dev/sda2           16164       19196    24362572+  83  Linux
/dev/sda3           19197       19457     2096482+  82  Linux swap / Solaris
/dev/sda4            9741       16163    51592747+  83  Linux

Partition table entries are not in disk order
~ $ ls /dev/disk/by-uuid -alh
total 0
drwxr-xr-x 2 root root 120 2007-10-06 21:43 .
drwxr-xr-x 5 root root 100 2007-10-06 21:43 ..
lrwxrwxrwx 1 root root  10 2007-10-06 21:43 1CC4ADDBC4ADB802 -> ../../sda1
lrwxrwxrwx 1 root root  10 2007-10-06 21:43 3439fb11-ee6f-443a-9635-73ee7268e31c -> ../../sda4
lrwxrwxrwx 1 root root  10 2007-10-06 21:43 7e7c0b1a-e1ac-4d89-adf0-f940111778af -> ../../sda3
lrwxrwxrwx 1 root root  10 2007-10-06 21:43 82e37328-095e-4fd8-87ca-a74c6decc746 -> ../../sda2


Koodia: [Valitse]

#/etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0

/dev/sda2 / ext3 defaults,errors=remount-ro 0 1
UUID=1CC4ADDBC4ADB802 /media/sda1     ntfs    defaults,nls=utf8,umask=007,gid=46 0       1
/dev/sda3 none swap sw 0 0
/dev/hda        /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/sda4       /media/disk     ext3     defaults     0     0

Päivitin grubin ja sekään ei auttanut ongelmaan.
Tässä tietoja onnistuneesta käynnistyksestä

dmesg

Koodia: [Valitse]

[    0.000000] Linux version 2.6.22-13-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Thu Oct 4 17:18:44 GMT 2007 (Ubuntu 2.6.22-13.40-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ff60000 (usable)
[    0.000000]  BIOS-e820: 000000007ff60000 - 000000007ff6e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ff6e000 - 000000007ff6f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007ff6f000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 1151MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f8650
[    0.000000] Entering add_active_range(0, 0, 524128) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   524128
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   524128
[    0.000000] On node 0 totalpages: 524128
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2302 pages used for memmap
[    0.000000]   HighMem zone: 292450 pages, LIFO batch:31
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xC00F85A0 checksum 0
[    0.000000] ACPI: RSDP 000F85A0, 0024 (r2 PTLTD )
[    0.000000] ACPI: XSDT 7FF649A9, 006C (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
[    0.000000] ACPI: FACP 7FF6D92A, 00F4 (r3 NVIDIA MCP65-E   6040000 PTL_    F4240)
[    0.000000] ACPI: DSDT 7FF64A15, 8EA1 (r1 NVIDIA    MCP65  6040000 MSFT  3000000)
[    0.000000] ACPI: FACS 7FF6EFC0, 0040
[    0.000000] ACPI: SRAT 7FF6DA1E, 00A0 (r1 AMD    HAMMER    6040000 AMD         1)
[    0.000000] ACPI: WDAT 7FF6DABE, 0104 (r1 PTLTD  WDATTBL   6040000  LTP        1)
[    0.000000] ACPI: SSDT 7FF6DBC2, 01C4 (r1 PTLTD  POWERNOW  6040000  LTP        1)
[    0.000000] ACPI: MCFG 7FF6DD86, 003C (r1 HP       MCFG    6040000  LTP        0)
[    0.000000] ACPI: HPET 7FF6DDC2, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
[    0.000000] ACPI: APIC 7FF6DDFA, 0068 (r1 HP      APIC    6040000  LTP        0)
[    0.000000] ACPI: BOOT 7FF6DE62, 0028 (r1     HP $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: SLIC 7FF6DE8A, 0176 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] OEM ID: nVIDIA   Product ID: MCP65-EMU    APIC at: 0xFEE00000
[    0.000000] Processor #0 15:8 APIC version 16
[    0.000000] Processor #1 15:8 APIC version 16
[    0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Processors: 2
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] Built 1 zonelists.  Total pages: 520034
[    0.000000] Kernel command line: root=/dev/sda2 ro noapic nolapic irqfixup nodma
[    0.000000] Misrouted IRQ fixup support enabled.
[    0.000000] This may impact system performance.
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1808.250 MHz processor.
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 2067080k/2096512k available (2015k kernel code, 28216k reserved, 916k data, 364k init, 1179008k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.000000]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[    0.000000]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[    0.000000]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    0.000000] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[    0.000000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.000000] hpet0: 3 32-bit timers, 25000000 Hz
[    0.080000] Calibrating delay using timer specific routine.. 3620.06 BogoMIPS (lpj=7240122)
[    0.080000] Security Framework v1.0.0 initialized
[    0.080000] SELinux:  Disabled at boot.
[    0.080000] Mount-cache hash table entries: 512
[    0.080000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[    0.080000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.080000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.080000] CPU 0(2) -> Core 0
[    0.080000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[    0.080000] Compat vDSO mapped to ffffe000.
[    0.080000] Checking 'hlt' instruction... OK.
[    0.096000] SMP alternatives: switching to UP code
[    0.096000] Early unpacking initramfs... done
[    0.416000] ACPI: Core revision 20070126
[    0.416000] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[    0.420000] ACPI: setting ELCR to 0200 (from 8ca0)
[    0.424000] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02
[    0.424000] SMP alternatives: switching to SMP code
[    0.424000] Booting processor 1/1 eip 3000
[    0.436000] Initializing CPU#1
[    0.516000] Calibrating delay using timer specific routine.. 3616.42 BogoMIPS (lpj=7232857)
[    0.516000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
[    0.516000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.516000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.516000] CPU 1(2) -> Core 1
[    0.516000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
[    0.516000] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02
[    0.516000] Total of 2 processors activated (7236.48 BogoMIPS).
[    0.516000] Brought up 2 CPUs
[    0.536000] migration_cost=4000
[    0.536000] Booting paravirtualized kernel on bare hardware
[    0.536000] Time: 21:26:22  Date: 09/06/107
[    0.536000] NET: Registered protocol family 16
[    0.536000] EISA bus registered
[    0.536000] ACPI: bus type pci registered
[    0.556000] PCI: PCI BIOS revision 3.00 entry at 0xfde1b, last bus=9
[    0.556000] PCI: Using configuration type 1
[    0.556000] Setting up standard PCI resources
[    0.560000] ACPI: EC: Look up EC in DSDT
[    0.560000] ACPI: EC: GPE=0x10, ports=0x66, 0x62
[    0.560000] ACPI: System BIOS is requesting _OSI(Linux)
[    0.560000] ACPI: Please test with "acpi_osi=!Linux"
[    0.560000] Please send dmidecode to linux-acpi@vger.kernel.org
[    0.560000] ACPI: Interpreter enabled
[    0.560000] ACPI: (supports S0 S3 S4 S5)
[    0.560000] ACPI: Using PIC for interrupt routing
[    0.568000] ACPI: EC: GPE=0x10, ports=0x66, 0x62
[    0.568000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.568000] PCI: Probing PCI hardware (bus 00)
[    0.572000] PCI: Transparent bridge - 0000:00:08.0
[    0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[    0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[    0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[    0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[    0.572000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR3._PRT]
[    0.592000] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 *15)
[    0.596000] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[    0.596000] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.596000] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.596000] ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 *11 14 15)
[    0.600000] ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.600000] ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.600000] ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 *15)
[    0.600000] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[    0.604000] ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15)
[    0.604000] ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15)
[    0.604000] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.604000] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.604000] ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.608000] ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15)
[    0.608000] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.608000] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.608000] pnp: PnP ACPI init
[    0.608000] ACPI: bus type pnp registered
[    0.608000] ACPI Error (dsopcode-0548): Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) [20070126]
[    0.608000] ACPI Error (psparse-0551): Method parse/execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node df85b7c8), AE_AML_BUFFER_LIMIT
[    0.612000] ACPI Error (uteval-0236): Method execution failed [\_SB_.PCI0.LPC0.PMIO._CRS] (Node df85b7c8), AE_AML_BUFFER_LIMIT
[    0.612000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[    0.612000] pnp: PnP ACPI: found 11 devices
[    0.612000] ACPI: ACPI bus type pnp unregistered
[    0.612000] PnPBIOS: Disabled by ACPI PNP
[    0.612000] PCI: Using ACPI for IRQ routing
[    0.612000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.636000] NET: Registered protocol family 8
[    0.636000] NET: Registered protocol family 20
[    0.636000] pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[    0.636000] pnp: 00:0a: iomem range 0xffc00000-0xffffffff could not be reserved
[    0.636000] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.636000] pnp: 00:0a: iomem range 0xfed00000-0xfed00fff has been reserved
[    0.640000] Time: hpet clocksource has been installed.
[    0.640000] pnp: 00:0a: iomem range 0xfec80000-0xfec80fff has been reserved
[    0.668000] PCI: Bridge: 0000:00:08.0
[    0.668000]   IO window: disabled.
[    0.668000]   MEM window: b0100000-b01fffff
[    0.668000]   PREFETCH window: disabled.
[    0.668000] PCI: Bridge: 0000:00:0b.0
[    0.668000]   IO window: disabled.
[    0.668000]   MEM window: disabled.
[    0.668000]   PREFETCH window: disabled.
[    0.668000] PCI: Bridge: 0000:00:0c.0
[    0.668000]   IO window: disabled.
[    0.668000]   MEM window: b0200000-b02fffff
[    0.668000]   PREFETCH window: disabled.
[    0.668000] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:05:00.0
[    0.668000] PCI: Bridge: 0000:00:0d.0
[    0.668000]   IO window: 4000-4fff
[    0.672000]   MEM window: b1000000-b3ffffff
[    0.672000]   PREFETCH window: c0000000-cfffffff
[    0.672000] PCI: Bridge: 0000:00:0e.0
[    0.672000]   IO window: 5000-5fff
[    0.672000]   MEM window: b4000000-b5ffffff
[    0.672000]   PREFETCH window: d0000000-d01fffff
[    0.672000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[    0.672000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.672000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.672000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.672000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.672000] NET: Registered protocol family 2
[    0.720000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.720000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[    0.720000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.720000] TCP: Hash tables configured (established 131072 bind 65536)
[    0.720000] TCP reno registered
[    0.736000] checking if image is initramfs... it is
[    1.364000] Freeing initrd memory: 7095k freed
[    1.364000] Simple Boot Flag at 0x36 set to 0x1
[    1.364000] audit: initializing netlink socket (disabled)
[    1.364000] audit(1191705982.140:1): initialized
[    1.368000] highmem bounce pool size: 64 pages
[    1.368000] VFS: Disk quotas dquot_6.5.1
[    1.368000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.368000] io scheduler noop registered
[    1.368000] io scheduler anticipatory registered
[    1.368000] io scheduler deadline registered
[    1.368000] io scheduler cfq registered (default)
[    1.368000] Boot video device is 0000:05:00.0
[    1.368000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    1.368000] assign_interrupt_mode Found MSI capability
[    1.368000] Allocate Port Service[0000:00:0b.0:pcie00]
[    1.368000] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    1.368000] assign_interrupt_mode Found MSI capability
[    1.368000] Allocate Port Service[0000:00:0c.0:pcie00]
[    1.368000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    1.368000] assign_interrupt_mode Found MSI capability
[    1.368000] Allocate Port Service[0000:00:0d.0:pcie00]
[    1.368000] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    1.368000] assign_interrupt_mode Found MSI capability
[    1.368000] Allocate Port Service[0000:00:0e.0:pcie00]
[    1.368000] isapnp: Scanning for PnP cards...
[    1.724000] isapnp: No Plug & Play device found
[    1.744000] Real Time Clock Driver v1.12ac
[    1.744000] hpet_resources: 0xfed00000 is busy
[    1.744000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.744000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.744000] input: Macintosh mouse button emulation as /class/input/input0
[    1.744000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.772000] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.772000] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.772000] mice: PS/2 mouse device common for all mice
[    1.776000] EISA: Probing bus 0 at eisa.0
[    1.776000] Cannot allocate resource for EISA slot 1
[    1.776000] Cannot allocate resource for EISA slot 3
[    1.776000] Cannot allocate resource for EISA slot 4
[    1.776000] Cannot allocate resource for EISA slot 5
[    1.776000] EISA: Detected 0 cards.
[    1.776000] TCP cubic registered
[    1.776000] NET: Registered protocol family 1
[    1.776000] Using IPI No-Shortcut mode
[    1.776000]   Magic number: 11:78:449
[    1.776000] Freeing unused kernel memory: 364k freed
[    1.792000] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.992000] AppArmor: AppArmor initialized<5>audit(1191705982.640:2):  type=1505 info="AppArmor initialized" pid=1241
[    2.000000] fuse init (API version 7.8)
[    2.008000] Failure registering capabilities with primary security module.
[    2.040000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    2.040000] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.040000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    2.040000] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.040000] ACPI Exception (thermal-0311): AE_BAD_DATA, No critical threshold [20070126]
[    2.628000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    2.628000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx


[nawitus]

Koodia: [Valitse]

[    2.628000] NFORCE-MCP65: IDE controller at PCI slot 0000:00:09.0
[    2.628000] NFORCE-MCP65: chipset revision 161
[    2.628000] NFORCE-MCP65: not 100% native mode: will probe irqs later
[    2.628000] NFORCE-MCP65: BIOS didn't set cable bits correctly. Enabling workaround.
[    2.628000] NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller
[    2.628000]     ide0: BM-DMA at 0x30c0-0x30c7, BIOS settings: hda:DMA, hdb:pio
[    2.628000] Probing IDE interface ide0...
[    2.640000] usbcore: registered new interface driver usbfs
[    2.640000] usbcore: registered new interface driver hub
[    2.640000] usbcore: registered new device driver usb
[    2.640000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.660000] SCSI subsystem initialized
[    2.664000] libata version 2.21 loaded.
[    2.744000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[    3.376000] hda: MATSHITADVD-RAM UJ-851S, ATAPI CD/DVD-ROM drive
[    3.712000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    3.712000] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
[    3.712000] PCI: setting IRQ 11 as level-triggered
[    3.712000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ 11
[    3.712000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[    3.712000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    3.716000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    3.716000] ohci_hcd 0000:00:02.0: irq 11, io mem 0xb0006000
[    3.772000] usb usb1: configuration #1 chosen from 1 choice
[    3.772000] hub 1-0:1.0: USB hub found
[    3.772000] hub 1-0:1.0: 10 ports detected
[    3.876000] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7
[    3.876000] PCI: setting IRQ 7 as level-triggered
[    3.876000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 7 (level, low) -> IRQ 7
[    3.876000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[    3.876000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    3.876000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[    3.876000] ehci_hcd 0000:00:02.1: debug port 1
[    3.876000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[    3.876000] ehci_hcd 0000:00:02.1: irq 7, io mem 0xb0007000
[    3.876000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.876000] usb usb2: configuration #1 chosen from 1 choice
[    3.876000] hub 2-0:1.0: USB hub found
[    3.876000] hub 2-0:1.0: 10 ports detected
[    3.980000] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 15
[    3.980000] PCI: setting IRQ 15 as level-triggered
[    3.980000] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 15 (level, low) -> IRQ 15
[    3.980000] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
[    3.980000] PCI: setting IRQ 10 as level-triggered
[    3.980000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LMAC] -> GSI 10 (level, low) -> IRQ 10
[    3.980000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[    3.980000] forcedeth: using HIGHDMA
[    3.980000] 0000:00:06.0: Invalid Mac address detected: 17:a0:73:24:1b:00
[    3.980000] Please complain to your hardware vendor. Switching to a random MAC.
[    4.032000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[15]  MMIO=[b0100000-b01007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    4.044000] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, (U)DMA
[    4.048000] Uniform CD-ROM driver Revision: 3.20
[    4.504000] eth0: forcedeth.c: subsystem: 0103c:30cf bound to 0000:00:06.0
[    4.504000] ahci 0000:00:0a.0: version 2.2
[    4.504000] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 5
[    4.504000] PCI: setting IRQ 5 as level-triggered
[    4.504000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 5 (level, low) -> IRQ 5
[    4.612000] usb 2-4: new high speed USB device using ehci_hcd and address 3
[    4.752000] usb 2-4: configuration #1 chosen from 1 choice
[    5.056000] usb 1-2: new low speed USB device using ohci_hcd and address 2
[    5.268000] usb 1-2: configuration #1 chosen from 1 choice
[    5.280000] usbcore: registered new interface driver hiddev
[    5.288000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[    5.288000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2
[    5.288000] usbcore: registered new interface driver usbhid
[    5.288000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    5.308000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00241b0029f63b00]
[    5.508000] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    5.508000] ahci 0000:00:0a.0: flags: 64bit ncq pm led clo pmp pio
[    5.508000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    5.508000] scsi0 : ahci
[    5.508000] scsi1 : ahci
[    5.508000] scsi2 : ahci
[    5.508000] scsi3 : ahci
[    5.508000] ata1: SATA max UDMA/133 cmd 0xf8874100 ctl 0x00000000 bmdma 0x00000000 irq 5
[    5.508000] ata2: SATA max UDMA/133 cmd 0xf8874180 ctl 0x00000000 bmdma 0x00000000 irq 5
[    5.508000] ata3: SATA max UDMA/133 cmd 0xf8874200 ctl 0x00000000 bmdma 0x00000000 irq 5
[    5.508000] ata4: SATA max UDMA/133 cmd 0xf8874280 ctl 0x00000000 bmdma 0x00000000 irq 5
[   11.032000] ata1: port is slow to respond, please be patient (Status 0x80)
[   15.848000] ata1: softreset failed (device not ready)
[   16.324000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   16.324000] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7BP, max UDMA/100
[   16.324000] ata1.00: 312581808 sectors, multi 16: LBA48
[   16.324000] ata1.00: configured for UDMA/100
[   16.636000] ata2: SATA link down (SStatus 0 SControl 300)
[   16.948000] ata3: SATA link down (SStatus 0 SControl 300)
[   17.260000] ata4: SATA link down (SStatus 0 SControl 300)
[   17.260000] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[   17.268000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   17.268000] sd 0:0:0:0: [sda] Write Protect is off
[   17.268000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.268000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.268000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   17.268000] sd 0:0:0:0: [sda] Write Protect is off
[   17.268000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   17.268000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   17.268000]  sda: sda1 sda2 sda3 sda4
[   17.720000] sd 0:0:0:0: [sda] Attached SCSI disk
[   17.724000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   17.984000] Attempting manual resume
[   17.984000] swsusp: Resume From Partition 8:3
[   17.984000] PM: Checking swsusp image.
[   17.984000] PM: Resume from disk failed.
[   18.024000] kjournald starting.  Commit interval 5 seconds
[   18.024000] EXT3-fs: mounted filesystem with ordered data mode.
[   28.376000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[   28.376000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[   28.508000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   28.544000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   28.716000] input: PC Speaker as /class/input/input3
[   28.988000] Linux agpgart interface v0.102 (c) Dave Jones
[   29.012000] sdhci: Secure Digital Host Controller Interface driver
[   29.012000] sdhci: Copyright(c) Pierre Ossman
[   29.012000] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 22)
[   29.012000] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
[   29.012000] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 10 (level, low) -> IRQ 10
[   29.012000] mmc0: SDHCI at 0xb0100800 irq 10 DMA
[   29.032000] Linux video capture interface: v2.00
[   29.352000] nvidia: module license 'NVIDIA' taints kernel.
[   29.536000] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[   29.608000] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 15
[   29.608000] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK4E] -> GSI 15 (level, low) -> IRQ 15
[   29.608000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   29.608000] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[   29.608000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[   29.672000] uvcvideo: Found UVC 1.00 device HP Webcam (064e:a101)
[   29.672000] usbcore: registered new interface driver uvcvideo
[   29.672000] USB Video Class driver (v0.1.0)
[   29.956000] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
[   29.956000] ACPI: PCI Interrupt 0000:00:07.0[B] -> Link [LAZA] -> GSI 11 (level, low) -> IRQ 11
[   29.956000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   30.360000] lp: driver loaded but no devices found
[   30.420000] ndiswrapper version 1.45 loaded (smp=yes)
[   30.536000] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
[   30.536000] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 11
[   30.536000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 11 (level, low) -> IRQ 11
[   30.536000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   30.544000] ndiswrapper: using IRQ 11
[   30.892000] wlan0: ethernet device 00:1a:73:75:86:2e using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4312.5.conf
[   30.892000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[   30.892000] usbcore: registered new interface driver ndiswrapper
[   30.932000] Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1 across:2096472k
[   31.536000] EXT3 FS on sda2, internal journal
[   32.032000] kjournald starting.  Commit interval 5 seconds
[   32.032000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   32.032000] EXT3 FS on sda4, internal journal
[   32.032000] EXT3-fs: mounted filesystem with ordered data mode.
[   32.424000] NET: Registered protocol family 17
[   33.552000] ACPI: Video Device [UVGA] (multi-head: yes  rom: no  post: no)
[   33.552000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   33.568000] No dock devices found.
[   33.652000] ACPI: AC Adapter [ACAD] (on-line)
[   33.756000] ACPI: Battery Slot [BAT0] (battery present)
[   33.768000] input: Power Button (FF) as /class/input/input5
[   33.768000] ACPI: Power Button (FF) [PWRF]
[   33.768000] input: Power Button (CM) as /class/input/input6
[   33.768000] ACPI: Power Button (CM) [PWRB]
[   33.768000] input: Sleep Button (CM) as /class/input/input7
[   33.768000] ACPI: Sleep Button (CM) [SLPB]
[   34.048000] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-56 processors (version 2.00.00)
[   34.048000] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x13
[   34.048000] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x15
[   34.048000] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x1e
[   35.416000] eth18: no link during initialization.
[   35.532000] apm: BIOS not found.
[   36.232000] Failure registering capabilities with primary security module.
[   36.500000] Clocksource tsc unstable (delta = -277807664 ns)
[   38.568000] NET: Registered protocol family 10
[   38.568000] lo: Disabled Privacy Extensions
[   38.568000] ADDRCONF(NETDEV_UP): eth18: link is not ready
[   48.908000] wlan0: no IPv6 routers present

lspci

Koodia: [Valitse]

00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP65 SMU (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)
00:06.0 Ethernet controller: nVidia Corporation MCP65 Ethernet (rev a3)
00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)
00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation Unknown device 045b (rev a1)
00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 02)
05:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:05.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)


[nawitus]

Löysin ratkaisun joka on toiminut ainakin muutaman bootin testailun.
https://answers.launchpad.net/ubuntu/+question/14023