Juu, valitsin tuon Printer Drivers ja menin eteenpäin niin että latasin tiedoston koneelle.
Alla oleva teksti tuli sitten ja nyt en osaa enää tästä jatkaa... usb connection olisi kyseessä
1. Login as a superuser ( or use "sudo" option if it is required )
2. Download driver.
Download Linux driver.
3. Install Linux driver
1. Turn on the printer and connect the USB cable.
2. Open the terminal and go to the directory where the driver is.
3. Install Linux driver.The install process may take some time. Please wait until it is complete.
Command (for dpkg) : dpkg -i --force-all (linux-drivername)
4. Check if the Linux driver is installed
Command (for dpkg) : dpkg -l | grep Brother
4. Depending on the connection type you are using (USB or Network), follow one of the steps below.
(for USB Connection)
1. Open a web browser and go to "
http://localhost:631/printers".
2. Check if the Device URI of your printer is "usb://Brother/(your printer's model name)"
If the device URI is different from the example above, please go to "Modify Printer" of your printer to select proper device
and driver.
If your printer is not listed on "
http://localhost:631/printers", please go to "
http://localhost:631/admin" and click "Add
printer" and select proper device and driver.
(for Network Connection)
1. Open a web browser and go to "
http://localhost:631/printers".
2. Click "Modify Printer" and set following parameters.
- "LPD/LPR Host or Printer" or "AppSocket/HP JetDirect" for Device
- lpd://(Your printer's IP address)/binary_p1 for Device URI
- Brother for Make/Manufacturer Selection
- Your printer's name for Model/Driver Selection
5. Try a test print
Open a text editor, write something and select "print" from the menu.
Aihe: Brother HL-L2310D ajurit (Ratkaistu) (Luettu 2795 kertaa)
