Nebula PCI ka Maverick RATKAISTU

[Pontus12]

Sain digitveen toimimaan Ubuntu 10.04 versiossa syöttämällä ensin seuraavan litanian:

jotaarkka@Thalia1:~$ sudo modprobe -vr dvb_bt8xx
[sudo] password for jotaarkka:
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/dvb/dvb-core/dvb-core.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/dvb/bt8xx/bt878.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/bt8xx/bttv.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/v4l2-common.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/videodev.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/v4l1-compat.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/v4l2-compat-ioctl32.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/i2c/algos/i2c-algo-bit.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/videobuf-dma-sg.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/videobuf-core.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/btcx-risc.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/IR/ir-common.ko
rmmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/tveeprom.ko
jotaarkka@Thalia1:~$ sudo modprobe -v dvb_bt8xx
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/tveeprom.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/IR/ir-common.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/btcx-risc.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/videobuf-core.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/videobuf-dma-sg.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/i2c/algos/i2c-algo-bit.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/v4l2-compat-ioctl32.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/v4l1-compat.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/videodev.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/v4l2-common.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/video/bt8xx/bttv.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/dvb/bt8xx/bt878.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/dvb/dvb-core/dvb-core.ko
insmod /lib/modules/2.6.35-22-generic/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko

Maverickissa Kaffeine ei käynnistä digitveetä ensimmäisellä kerralla, vaan minun pitää sulkea se käynnistyksen jälkeen. Sitten ajaa yllä oleva litania uudestaan. Sen jälkeen Kaffeine käynnistää digitveen. Ei tuo nyt kovin vaikeaa ole, mutta en ymmärrä, miksi näin tapahtuu? Eikö Ubuntussa voisi olla valmiina vaikkla scripti, jonka voisi käynnistää klikkaamalla. Uudet tavalliset käyttäjät eivät välttämättä osaa hakea apua netistä.

[nm]

Maverickissa Kaffeine ei käynnistä digitveetä ensimmäisellä kerralla, vaan minun pitää sulkea se käynnistyksen jälkeen. Sitten ajaa yllä oleva litania uudestaan. Sen jälkeen Kaffeine käynnistää digitveen. Ei tuo nyt kovin vaikeaa ole, mutta en ymmärrä, miksi näin tapahtuu? Eikö Ubuntussa voisi olla valmiina vaikkla scripti, jonka voisi käynnistää klikkaamalla. Uudet tavalliset käyttäjät eivät välttämättä osaa hakea apua netistä.

Tällainen toimenpide ei ole normaalisti tarpeen. Mitä kernelin loki (päätteessä: dmesg) sanoo silloin kun katselu ei onnistu?

[Pontus12]

Tällaine litania tuli, kun ajoin dmesgin. Jostain syystä antamani komento ei enää näkynyt. Oliko tämä mahdollisesti liian pitkä pääteikkunaan?

[    0.793487] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.793490] Placing 64MB software IO TLB between ffff880001f9e000 - ffff880005f9e000
[    0.793492] software IO TLB at phys 0x1f9e000 - 0x5f9e000
[    0.793789] Scanning for low memory corruption every 60 seconds
[    0.793919] audit: initializing netlink socket (disabled)
[    0.793932] type=2000 audit(1290938580.780:1): initialized
[    0.806834] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.808131] VFS: Disk quotas dquot_6.5.2
[    0.808181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.808692] fuse init (API version 7.14)
[    0.808768] msgmni has been set to 7896
[    0.809505] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.809509] io scheduler noop registered
[    0.809510] io scheduler deadline registered
[    0.809543] io scheduler cfq registered (default)
[    0.809640] pcieport 0000:00:01.0: setting latency timer to 64
[    0.809662]   alloc irq_desc for 40 on node -1
[    0.809664]   alloc kstat_irqs on node -1
[    0.809673] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.809723] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.809752]   alloc irq_desc for 41 on node -1
[    0.809753]   alloc kstat_irqs on node -1
[    0.809760] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.809835] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.809862]   alloc irq_desc for 42 on node -1
[    0.809863]   alloc kstat_irqs on node -1
[    0.809869] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.809939] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.809968]   alloc irq_desc for 43 on node -1
[    0.809970]   alloc kstat_irqs on node -1
[    0.809976] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.810058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.810143] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.810211] intel_idle: MWAIT substates: 0x20
[    0.810212] intel_idle: does not run on family 6 model 15
[    0.810316] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.810322] ACPI: Power Button [PWRB]
[    0.810362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.810365] ACPI: Power Button [PWRF]
[    0.810605] ACPI: acpi_idle registered with cpuidle
[    0.813008] ERST: Table is not found!
[    0.813184] Linux agpgart interface v0.103
[    0.813204] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.813294] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.813610] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.814574] brd: module loaded
[    0.815000] loop: module loaded
[    0.815143] ata_piix 0000:00:1f.2: version 2.13
[    0.815156]   alloc irq_desc for 22 on node -1
[    0.815158]   alloc kstat_irqs on node -1
[    0.815164] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.815168] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.815203] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.815269] scsi0 : ata_piix
[    0.815330] scsi1 : ata_piix
[    0.816612] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[    0.816616] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[    0.816636] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.816640] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.816680] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.816722] scsi2 : ata_piix
[    0.816772] scsi3 : ata_piix
[    0.818024] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[    0.818028] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[    0.818082] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[    0.818088] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.818121] pata_acpi 0000:03:00.1: setting latency timer to 64
[    0.818134] pata_acpi 0000:03:00.1: PCI INT B disabled
[    0.818372] Fixed MDIO Bus: probed
[    0.818399] PPP generic driver version 2.4.2
[    0.818432] tun: Universal TUN/TAP device driver, 1.6
[    0.818434] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.818498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.818512]   alloc irq_desc for 18 on node -1
[    0.818514]   alloc kstat_irqs on node -1
[    0.818518] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.818536] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.818539] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.818567] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.818594] ehci_hcd 0000:00:1a.7: debug port 1
[    0.822487] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.822500] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[    0.839787] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.839960] hub 1-0:1.0: USB hub found
[    0.839966] hub 1-0:1.0: 6 ports detected
[    0.840042]   alloc irq_desc for 23 on node -1
[    0.840044]   alloc kstat_irqs on node -1
[    0.840051] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.840075] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.840078] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.840124] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.840149] ehci_hcd 0000:00:1d.7: debug port 1
[    0.844029] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.844045] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[    0.859783] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.859955] hub 2-0:1.0: USB hub found
[    0.859960] hub 2-0:1.0: 6 ports detected
[    0.860037] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.860051] uhci_hcd: USB Universal Host Controller Interface driver
[    0.860120] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.860130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.860134] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.860170] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.860204] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.860307] hub 3-0:1.0: USB hub found
[    0.860311] hub 3-0:1.0: 2 ports detected
[    0.860364]   alloc irq_desc for 21 on node -1
[    0.860366]   alloc kstat_irqs on node -1
[    0.860372] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.860377] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.860380] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.860407] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.860437] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.860532] hub 4-0:1.0: USB hub found
[    0.860536] hub 4-0:1.0: 2 ports detected
[    0.860586] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.860592] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.860594] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.860621] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.860642] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.860738] hub 5-0:1.0: USB hub found
[    0.860742] hub 5-0:1.0: 2 ports detected
[    0.860791] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.860796] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.860798] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.860828] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.860850] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.860941] hub 6-0:1.0: USB hub found
[    0.860945] hub 6-0:1.0: 2 ports detected
[    0.861005]   alloc irq_desc for 19 on node -1
[    0.861007]   alloc kstat_irqs on node -1
[    0.861011] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.861016] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.861018] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.861047] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.861076] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.861171] hub 7-0:1.0: USB hub found
[    0.861174] hub 7-0:1.0: 2 ports detected
[    0.861225] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.861230] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.861233] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.861264] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.861285] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.861380] hub 8-0:1.0: USB hub found
[    0.861384] hub 8-0:1.0: 2 ports detected
[    0.861486] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.861488] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.862018] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.862077] mice: PS/2 mouse device common for all mice
[    0.862168] rtc_cmos 00:03: RTC can wake from S4
[    0.862202] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.862224] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.862315] device-mapper: uevent: version 1.0.3
[    0.862420] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.862800] device-mapper: multipath: version 1.1.1 loaded
[    0.862803] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.863202] cpuidle: using governor ladder
[    0.863205] cpuidle: using governor menu
[    0.863441] TCP cubic registered
[    0.863547] NET: Registered protocol family 10
[    0.863849] lo: Disabled Privacy Extensions
[    0.864013] NET: Registered protocol family 17
[    0.864892] PM: Resume from disk failed.
[    0.864903] registered taskstats version 1
[    0.865219]   Magic number: 2:707:73
[    0.865316] rtc_cmos 00:03: setting system clock to 2010-11-28 10:03:01 UTC (1290938581)
[    0.865323] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.865325] EDD information not available.
[    0.883593] Freeing initrd memory: 10748k freed
[    1.160152] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.320089] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.320229] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.321314] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.321454] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.340334] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100
[    1.340441] ata2.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.340444] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.340785] ata3.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[    1.340791] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.380187] ata4.00: configured for UDMA/100
[    1.380293] ata2.00: configured for UDMA/133
[    1.380834] ata3.00: configured for UDMA/133
[    1.380841] ata1.00: ATA-7: ST3400620AS, 3.AAE, max UDMA/133
[    1.380844] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.433781] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    1.472464] ata1.00: configured for UDMA/133
[    1.472611] scsi 0:0:0:0: Direct-Access     ATA      ST3400620AS      3.AA PQ: 0 ANSI: 5
[    1.472726] sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[    1.472743] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.472772] sd 0:0:0:0: [sda] Write Protect is off
[    1.472775] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.472806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.472913] scsi 1:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    1.472961]  sda:
[    1.473049] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.473059] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.473103] sd 1:0:0:0: [sdb] Write Protect is off
[    1.473106] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.473132] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.473157] scsi 2:0:0:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
[    1.473260]  sdb:
[    1.473264] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.473275] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.473311] sd 2:0:0:0: [sdc] Write Protect is off
[    1.473314] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.473340] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.473473]  sdc:

[Pontus12]

Koko litania ei mahtunut viestiin. Tässä jatko:

[    1.474080] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203B  SB00 PQ: 0 ANSI: 5
[    1.478392] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.478396] Uniform CD-ROM driver Revision: 3.20
[    1.478514] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.478555] sr 3:0:0:0: Attached scsi generic sg3 type 5
[    1.488814]  sdb1
[    1.489049] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.492923]  sdc1
[    1.493131] sd 2:0:0:0: [sdc] Attached SCSI disk
[    1.512118]  sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    1.537776] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.537810] Freeing unused kernel memory: 908k freed
[    1.538054] Write protecting the kernel read-only data: 10240k
[    1.538220] Freeing unused kernel memory: 416k freed
[    1.538453] Freeing unused kernel memory: 1644k freed
[    1.553419] udev[106]: starting version 163
[    1.580697] hub 1-3:1.0: USB hub found
[    1.580771] hub 1-3:1.0: 2 ports detected
[    1.585715] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.585726] atl1 0000:02:00.0: setting latency timer to 64
[    1.585819] atl1 0000:02:00.0: version 2.1.3
[    1.610441] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.610478] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.617244] scsi4 : pata_jmicron
[    1.617989] Floppy drive(s): fd0 is 1.44M
[    1.619201] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.621420] Initializing USB Mass Storage driver...
[    1.622242] scsi5 : pata_jmicron
[    1.623113] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    1.623116] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    1.623145] ahci 0000:03:00.0: version 3.0
[    1.623165] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.624987] scsi6 : usb-storage 1-1:1.0
[    1.625079] usbcore: registered new interface driver usb-storage
[    1.625082] USB Mass Storage support registered.
[    1.633685] FDC 0 is a post-1991 82077
[    1.643928] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.643933] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.643940] ahci 0000:03:00.0: setting latency timer to 64
[    1.644091] scsi7 : ahci
[    1.644174] scsi8 : ahci
[    1.644259] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    1.644263] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    1.772548] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x1
[    1.863897] usb 1-3.2: new high speed USB device using ehci_hcd and address 5
[    1.923298] ata5.01: ATA-6: ST3160023A, 3.04, max UDMA/100
[    1.923303] ata5.01: 312581808 sectors, multi 0: LBA48
[    1.962025] ata5.01: configured for UDMA/100
[    1.962146] scsi 4:0:1:0: Direct-Access     ATA      ST3160023A       3.04 PQ: 0 ANSI: 5
[    1.962306] sd 4:0:1:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.962326] sd 4:0:1:0: Attached scsi generic sg4 type 0
[    1.962391] sd 4:0:1:0: [sdd] Write Protect is off
[    1.962394] sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[    1.962422] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.962575]  sdd:
[    1.972312] hub 1-3.2:1.0: USB hub found
[    1.972640] hub 1-3.2:1.0: 4 ports detected
[    1.983099]  sdd1 < sdd5 >
[    1.989216] sd 4:0:1:0: [sdd] Attached SCSI disk
[    1.990070] ata7: SATA link down (SStatus 0 SControl 300)
[    1.991330] ata8: SATA link down (SStatus 0 SControl 300)
[    2.216218] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.253938] firewire_core: created device fw0: GUID 0011d800015f544c, S400
[    2.253964] usb 5-1: new low speed USB device using uhci_hcd and address 2
[    2.624509] scsi 6:0:0:0: Direct-Access     BUFFALO  External HDD          PQ: 0 ANSI: 2 CCS
[    2.624924] sd 6:0:0:0: Attached scsi generic sg5 type 0
[    2.712534] usb 7-2: new full speed USB device using uhci_hcd and address 2
[    2.975608] usb 1-3.2.2: new high speed USB device using ehci_hcd and address 6
[    3.084081] scsi9 : usb-storage 1-3.2.2:1.0
[    4.080947] scsi 9:0:0:0: Direct-Access     Seagate  FreeAgent        102F PQ: 0 ANSI: 4
[    4.081400] sd 9:0:0:0: Attached scsi generic sg6 type 0
[    4.082063] sd 9:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.082566] sd 9:0:0:0: [sdf] Write Protect is off
[    4.082569] sd 9:0:0:0: [sdf] Mode Sense: 1c 00 00 00
[    4.082571] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[    4.083678] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[    4.083684]  sdf: sdf1
[    4.085306] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[    4.085310] sd 9:0:0:0: [sdf] Attached SCSI disk
[    5.290142] sd 6:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    5.290652] sd 6:0:0:0: [sde] Write Protect is off
[    5.290657] sd 6:0:0:0: [sde] Mode Sense: 34 00 00 00
[    5.290660] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    5.291876] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    5.291883]  sde: sde1
[    5.315498] sd 6:0:0:0: [sde] Assuming drive cache: write through
[    5.315508] sd 6:0:0:0: [sde] Attached SCSI disk
[   15.154529] udev[418]: starting version 163
[   15.164549] lp: driver loaded but no devices found
[   15.224150] Adding 5389740k swap on /dev/sda6.  Priority:-1 extents:1 across:5389740k
[   15.316500] Linux video capture interface: v2.00
[   15.328461] bttv: driver version 0.9.18 loaded
[   15.328465] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   15.328517] bttv: Bt8xx card found (0).
[   15.328538] bttv 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   15.328551] bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 18, latency: 64, mmio: 0xf8ffe000
[   15.328683] bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem ID is 0071:0101
[   15.328686] bttv0: using: Nebula Electronics DigiTV [card=104,autodetected]
[   15.328719] bttv0: gpio: en=00000000, out=00000000 in=00ff00cf [init]
[   15.328768] bttv0: tuner absent
[   15.328828] bttv0: registered device video0
[   15.328853] bttv0: registered device vbi0
[   15.328877] bttv0: PLL: 28636363 => 35468950 .
[   15.329538] Bluetooth: Core ver 2.15
[   15.329560] NET: Registered protocol family 31
[   15.329561] Bluetooth: HCI device and connection manager initialized
[   15.329564] Bluetooth: HCI socket layer initialized
[   15.331740] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   15.333941] IR NEC protocol handler initialized
[   15.337292] usbcore: registered new interface driver btusb
[   15.339600] nvidia: module license 'NVIDIA' taints kernel.
[   15.339603] Disabling lock debugging due to kernel taint
[   15.341278] .
[   15.342544] type=1400 audit(1290931395.966:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=706 comm="apparmor_parser"
[   15.343149] type=1400 audit(1290931395.966:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=706 comm="apparmor_parser"
[   15.343473] type=1400 audit(1290931395.966:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=706 comm="apparmor_parser"
[   15.350463] IR RC5(x) protocol handler initialized
[   15.357767] IR RC6 protocol handler initialized
[   15.359983] IR JVC protocol handler initialized
[   15.361328]  ok
[   15.361364] bttv0: add subdevice "dvb0"
[   15.368189] IR Sony protocol handler initialized
[   15.375041] lirc_dev: IR Remote Control driver registered, major 249
[   15.376023] IR LIRC bridge handler initialized
[   15.409902] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.409974]   alloc irq_desc for 44 on node -1
[   15.409976]   alloc kstat_irqs on node -1
[   15.410013] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   15.410039] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.411301] Registered IR keymap rc-nebula
[   15.411381] input: bttv IR (card=104) as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/rc/rc0/input2
[   15.411435] rc0: bttv IR (card=104) as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/rc/rc0
[   15.412463] bt878: AUDIO driver version 0.0.0 loaded
[   15.412477] bt878: Bt878 AUDIO function found (0).
[   15.412488] bt878 0000:05:02.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   15.412490] bt878_probe: card id=[0x1010071],[ Nebula Electronics DigiTV ] has DVB functions.
[   15.412496] bt878(0): Bt878 (rev 17) at 05:02.1, irq: 18, latency: 64, memory: 0xf8fff000
[   15.477073] DVB: registering new adapter (bttv0)
[   15.502620] hda_codec: ALC883: BIOS auto-probing.
[   15.584558] DVB: registering adapter 0 frontend 0 (NxtWave NXT6000 DVB-T)...
[   15.835153] Adding 1453844k swap on /dev/sda7.  Priority:-2 extents:1 across:1453844k
[   15.926719] usbcore: registered new interface driver hiddev
[   15.926825] usbcore: registered new interface driver usbhid
[   15.926827] usbhid: USB HID core driver
[   16.009276] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3
[   16.009378] logitech 0003:046D:C512.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.2-1/input0
[   16.044543] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4
[   16.044663] logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-1/input1
[   16.085877] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.085886] nvidia 0000:01:00.0: setting latency timer to 64
[   16.085891] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.086076] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  260.19.06  Mon Sep 13 04:29:19 PDT 2010
[   16.787435] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   16.945656] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   18.306752] ppdev: user-space parallel port driver
[   18.319608] type=1400 audit(1290931398.936:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1188 comm="apparmor_parser"
[   18.320196] type=1400 audit(1290931398.946:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1189 comm="apparmor_parser"
[   18.320803] type=1400 audit(1290931398.946:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1189 comm="apparmor_parser"
[   18.321130] type=1400 audit(1290931398.946:: apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1189 comm="apparmor_parser"
[   18.322332] type=1400 audit(1290931398.946:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1193 comm="apparmor_parser"
[   18.322974] type=1400 audit(1290931398.946:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1194 comm="apparmor_parser"
[   18.323072] type=1400 audit(1290931398.946:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1193 comm="apparmor_parser"
[   18.456016]   alloc irq_desc for 45 on node -1
[   18.456020]   alloc kstat_irqs on node -1
[   18.456036] atl1 0000:02:00.0: irq 45 for MSI/MSI-X
[   18.456155] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[   18.456505] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.456917] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.330701] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   19.330704] vboxdrv: Successfully done.
[   19.330706] vboxdrv: Found 4 processor cores.
[   19.330779] VBoxDrv: dbg - g_abExecMemory=ffffffffa0d93d60
[   19.330836] vboxdrv: fAsync=0 offMin=0x27f offMax=0x1deb
[   19.330882] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   19.330884] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
[   19.584796] Bluetooth: L2CAP ver 2.14
[   19.584799] Bluetooth: L2CAP socket layer initialized
[   19.588793] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.588796] Bluetooth: BNEP filters: protocol multicast
[   19.592453] Bluetooth: SCO (Voice Link) ver 0.6
[   19.592455] Bluetooth: SCO socket layer initialized
[   19.760432] Bluetooth: RFCOMM TTY layer initialized
[   19.760445] Bluetooth: RFCOMM socket layer initialized
[   19.760447] Bluetooth: RFCOMM ver 1.11
[   22.344395] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=0
[   23.404407] EXT4-fs (sda5): re-mounted. Opts: commit=0
[   29.210023] eth0: no IPv6 routers present
[   81.233792] bt878(0): unloading
[   81.233805] bt878_mem: 0xffffc90011098000.
[   81.233824] bt878 0000:05:02.1: PCI INT A disabled
[   81.263789] bttv0: unloading
[   88.936106] Linux video capture interface: v2.00
[   88.945302] bttv: driver version 0.9.18 loaded
[   88.945305] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   88.945394] bttv: Bt8xx card found (0).
[   88.945406] bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 18, latency: 64, mmio: 0xf8ffe000
[   88.945461] bttv0: detected: Nebula Electronics DigiTV [card=104], PCI subsystem ID is 0071:0101
[   88.945464] bttv0: using: Nebula Electronics DigiTV [card=104,autodetected]
[   88.945490] bttv0: gpio: en=00000000, out=00000000 in=00ff00cf [init]
[   88.945538] bttv0: tuner absent
[   88.945594] bttv0: registered device video0
[   88.945622] bttv0: registered device vbi0
[   88.945642] bttv0: PLL: 28636363 => 35468950 .
[   88.946391] bttv0: PLL: 28636363 => 35468950 .
[   88.946898] bttv0: PLL: 28636363 => 35468950 . ok
[   88.963808] bttv0: add subdevice "dvb0"
[   88.963860]  ok
[   88.963883]  ok
[   88.967595] Registered IR keymap rc-nebula
[   88.967898] input: bttv IR (card=104) as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/rc/rc0/input5
[   88.968001] rc0: bttv IR (card=104) as /devices/pci0000:00/0000:00:1e.0/0000:05:02.0/rc/rc0
[   88.969797] bt878: AUDIO driver version 0.0.0 loaded
[   88.969821] bt878: Bt878 AUDIO function found (0).
[   88.969839] bt878 0000:05:02.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   88.969842] bt878_probe: card id=[0x1010071],[ Nebula Electronics DigiTV ] has DVB functions.
[   88.969851] bt878(0): Bt878 (rev 17) at 05:02.1, irq: 18, latency: 64, memory: 0xf8fff000
[   88.980005] DVB: registering new adapter (bttv0)
[   89.084415] DVB: registering adapter 0 frontend 0 (NxtWave NXT6000 DVB-T)...
[  110.883061] DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver
[  119.563719] DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver

[nm]

Eipä tuossa näy mitään erikoista. Viestien perusteella ajuri latautuu samalla tavalla bootissa ja jälkeenpäin.

Oletko kokeillut jotain toista ohjelmaa, kuten vaikkapa kanavien hakemista päätteessä scan- tai w_scan-työkalulla? Ehkä vika on Kaffeinessa.


Moduulien uudelleenlatauksen voisi ehkä laittaa /etc/rc.local -tiedostoon, jolloin se tehdään automaattisesti käynnistysessä:

gksudo gedit /etc/rc.local

Sisällöksi tällaista:

Koodia: [Valitse]

modprobe -r dvb_bt8xx
sleep 2
modprobe dvb_bt8xx

exit 0


[Pontus12]

Kiitos. Tein ohjeesi mukaan ja käynnistin koneen uudelleen. Kaffeine ei lähtenyt käyntiin ennen kuin ajoin litanian päätteessä. No tämä ei sinänsä ole minulle suuri ongelma, koska saan sen kuitenkin toimimaan. Isompi ongelma on, että en saa ääntä toimimaan käyttäessäni ohjelmaa recordmydesktop. Olen lukenut kaikki mahdolliset ohjeet, mitä vain olen löytänyt, mutta ääni ei toimi. Kuva tulee nätisti. Olen yrittänyt nauhoittaa sekä kaffeinen digitv-ruudusta että Yle Areenasta. Molemmissa ääni toimii muuten, mutta ei kaapatessa.

[nm]

Isompi ongelma on, että en saa ääntä toimimaan käyttäessäni ohjelmaa recordmydesktop. Olen lukenut kaikki mahdolliset ohjeet, mitä vain olen löytänyt, mutta ääni ei toimi. Kuva tulee nätisti. Olen yrittänyt nauhoittaa sekä kaffeinen digitv-ruudusta että Yle Areenasta. Molemmissa ääni toimii muuten, mutta ei kaapatessa.

Onko lopullisena päämääränä käyttää recordmydesktopia Areenan kaappaamiseen vai johonkin muuhun? Areenasta ja Elävästä arkistosta saa kyllä videot talteen RTMPDump-YLE-ohjelmalla, nopeasti ja ilman mitään ylimääräisiä muunnoksia. Kaffeinessa on luonnollisesti oma DVB-tallennustoimintonsa.

Ohjelmien äänien kaappaaminen recordmydesktopilla on hieman hankalaa, koska normaalisti se kuuntelee vain äänikortin kaappauslaitteita (mikrofonia ja linja-sisääntuloa). Pulseaudion tai ainakin Jackin avulla äänen voi siirtää suoraan recordmydesktopiin, mutta en nyt osaa heti sanoa mitä asetuksia on tehtävä käytännössä. Kannattaa tosiaan kaapata streamit suoraan, jos kyse on vain valmiiden lähetysten tallentamisesta.

[Pontus12]

Kiitos neuvosta. Asensin RTMPDump-YLE ohjelman ja sain ladattua tarvitsemani tiedoston. Se on todella kätevä, koska Areenassa on välillä ohjelmia, joita haluaisi katsella myöhemminkin. Sain myös recordmydesktop ohjelman toimimaan läppärissäni. Sitten tajusin, että se ei toiminut pöytäkoneessani, koska minulla ei ollut siinä mikrofonia. Sekin tuli siis ratkaistua. Kaffeine ei enää neuvosi jälkeen tarvitse kuin sen yhden litanian. En todellakaan ymmärrä, miksi se ei voisi toimia suoraan Ubuntussa. Ilmeisesti on kysymyksessä joku turvallisuusnäkökohta. Mutta hyvä näinkin!

[nm]

Kaffeine ei enää neuvosi jälkeen tarvitse kuin sen yhden litanian. En todellakaan ymmärrä, miksi se ei voisi toimia suoraan Ubuntussa. Ilmeisesti on kysymyksessä joku turvallisuusnäkökohta. Mutta hyvä näinkin!

Kuten sanoin heti aluksi, järjestelmän ei pitäisi toimia näin, enkä ymmärrä mikä tässä tapauksessa menee pieleen. Normaalisti DVB-katselu toimii kyllä suoraan ilman ajurien uudelleenlataamista. Jos haluat vielä selvittää asiaa, kokeile koneen käynnistyksen jälkeen jotain muuta DVB-ohjelmaa kuin Kaffeinea. Kanavanhakutyökaluista on helppo aloittaa.