Xubuntu 7.10, Dell Latitude D631, resoluutio-ongelmaa [RATKAISTU]

[zeniitti]

Tämän kanssa taistellut 3 päivää, eikä tulosta synny. Vaikka kuinka koittaa muutella xorg.conf-tiedostoa, niin uusia resoluutioita ei vaan tule vaihtoehdoiksi.

Tässä xorg.xonf

Koodia: [Valitse]

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "vesa"
BusID "PCI:1:5:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-70
VertRefresh 50-160
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24



    Subsection "Display"
        Depth       8
        Modes       "1280x800" "1152x864" "1024x768" "800x600"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x800" "1152x864" "1024x768" "800x600"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x800" "1152x864" "1024x768" "800x600"
        ViewPort    0 0
    EndSubsection


EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

Ja tässä kuitenkin resoluutiovaihtoehdot:

1024x768@85
800x600@86
640x480@86
720x400@86
640x400@86
640x350@86
640x350@86
512x384@0
320x240@0
320x240@0
320x200@0

Jos edes resoluution saisi oikeaksi: 1280x800, niin olisi avot. Integroitu ATI Radeon X1270 näyttis on sitten asia erikseen, siihen ei tunnu saavan mitään ajureita mistään. X vaan ei käynnisty...

[anttimr]

Vesa-ajuri ei tue laajakulmaresoluutioita. Koitapa aluksi asentaa ATI:n ajurit Rajoitettujen ajureiden hallinnan kautta . Valitettavasti 7.10:ssä on luultavasti vielä korjaamaton bugi, jonka vuoksi ohjelma pitää käynnistää komentoriviltä. Päätteeseen:

Koodia: [Valitse]

export LANG=C; restricted-manager
Sieltä valitset ATI:n ajurit, jos sellaisia tarjotaan. ATI:n ajuripaketti on minulle outo, joten en osaa sanoa, tuleeko ajuri käyttöön heti asennuksen jälkeen. Jos mitään ei tapahdu, editoi xorg.confin Driver kohtaan "fglrx" ja boottaa.

 

[zeniitti]

Kiitos nopeasta vastauksesta!

Sain ajettua tuon export LANG=C; restricted-manager komennon ja mielestäni ajurit sain käyttöön. Kone latasi muutaman paketin ja lopuksi laite piti bootata. Nyt kun avaan saman sovelluksen, niin näyttää seuraavalta:

Component: ATI accelerated graphics driver
Enabled: X
Status: In use

Asennus muutti jonkun verran xorg.conf-tiedostoa, mutta vieläkään resoja ei saa oikein:

Koodia: [Valitse]

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "fglrx"
Busid "PCI:1:5:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
Horizsync 30-70
Vertrefresh 50-160
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
Defaultdepth 24



SubSection "Display"
Depth 8
Modes "1280x800" "1152x864" "1024x768" "800x600"
Viewport 0 0
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1152x864" "1024x768" "800x600"
Viewport 0 0
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1152x864" "1024x768" "800x600"
Viewport 0 0
EndSubSection


EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection

Ottaisin screenshotteja, jos osaisin... PrintScreen nappi ei tee mitään ja Gimp herjaa, että leikepöydällä ei ole dataa. 7.10 Ubuntussa toimi mukavasti. Joutuu ehkä asentamaan Ubuntun tai Kubuntun ja testaamaan niillä, jos niiden ikkunaohjelmisto olisi suopeampi. Mulle ei ole väliä onko Ubuntu, Xubuntu vai Kubuntu  Kunhan vain toimisi...

[juyli]

Section "Monitor"
   Identifier   "Generic Monitor"
   Option      "DPMS"
   Horizsync   30-70
   Vertrefresh   50-160
EndSection

Tuo on siis kannettava LCD-näytöllä? Nuo annetut HorizSync ja VertRefresh -arvot ovat aivan liian korkeat. Lisäksi Ubuntu ei  noita oletuksena taida edes käyttää.
Kuten niin monasti aiemminkin, kannattaa kannettavan omistajien kurkkia Linux on Laptops ja Tuxmobil -sivuille. Sieltä löytyy tärkeitä vihjeitä.
http://tuxmobil.org/dell.html
http://www.linux-on-laptops.com/dell.html

[anttimr]

Älä ala suotta asentamaan uusiksi. Auttaako mitään

Koodia: [Valitse]

displayconfig-gtkEn tiedä missä valikossa se on Xubuntussa.

[zeniitti]

Itse asiassa asensin kuitenkin Ubuntun. Gnome in kivampi ikkunaohjelmisto omaan makuun ja toisaalta kannatti. Tai sain ainakin resoluution toimimaan.

Asennuksen jälkeen eka käynnistys, ja Ubuntu ilmoitti Restricted Drivereita olevan tarjolla. Ilmoitusta klikkaamalla sai kaiken asennettua, ei tarvittu yhtään komentoa terminaaliin. Tosin oikea reso olikin 1440x900... Tässä vielä tulos:







Ja xorg.conf

Koodia: [Valitse]

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "fglrx"
Busid "PCI:1:5:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
Horizsync 30-70
Vertrefresh 50-160
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
Defaultdepth 24
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection