Viestit

1

Ohjelmointi, palvelimet ja muu edistyneempi käyttö / Vs: Virtualisointi (ajantappo)projekti Pari kysymystä

« : 25.09.20 - klo:11.55 »

Yksi vaihtoehto on käyttää KVM:ää ja virt-manageria. Ohjeet sen käyttöönottoon ovat kuitenkin huonommat kuin Virtualboxille. KVM kykenee kuitenkin tehokkaasti varsin moneen. Esimerkiksi laitteiden ohjaus virtuaalikoneelle on varsin mielenkiintoinen ominaisuus. Voit esimerkiksi lisätä ulkoisen hiiren koneeseen siten että hiiri ohjaa vain virtuaalikonetta.

2

Ubuntu tietokoneissa / Numlock aiheuttaa levylle kirjotuksen

« : 23.05.18 - klo:19.54 »

Miksi numerolukon painaminen aiheuttaa kiintolevyllä toimintaa?

Tuoreessa 18.04 asennuksessa, jossa on langaton logitechin näppäimistö ja hdd kiintolevy, kuuluu kiintolevyn naksahdus ja kirjoittamisen merkkivalo välähtää aina kun numlockia painetaan.
Tämä siis tapahtuu aina, riippumatta siitä, olenko kirjautunut vaiko en. Muita näppäimiä painamalla samanlaista toimintaa ei tapahdu.

Nopea haku ei vastausta antanut, mutta archlinuxin käyttäjällä on ollut 2015 sama kysymys
https://unix.stackexchange.com/questions/187523/why-when-i-press-bloc-num-my-linux-writes-on-disk

3

Pelit / Vs: Teeworlds - Ubuntu Suomella oma serveri!

« : 10.04.15 - klo:20.58 »

Laitoin kokeeksi pystyyn serverin nimellä Ubuntu Finland CTF [Unofficial]
Auki ainakin toistaiseksi  Selvitän samalla miten hyvin oma verkko toimii tälläisessä käytössä.

4

Pelit / Vs: Minecraft laucheria ei saa ladattua

« : 10.04.15 - klo:17.25 »

Suosittelen openjdk7-jre käyttöä minecraftin kanssa. Java 8 takkusi pahasti käytössä ja 6 -versio on vanha (vaikka toimiikin).

Vielä varmuuden vuoksi linkki asennusohjeisiin:
http://openjdk.java.net/install/

5

Laitealue / Vs: Lumia 920 ja 14.10 - miten päästä luurin tiedostoihin käsiksi

« : 10.04.15 - klo:16.44 »

Lumiat saa näkyviin Ubuntussa, kun avaa puhelimen päälle _ennen_ kuin kytkee USB-piuhan kiinni pc:hen. Näin ainakin minun Lumia 820:llä ja Ubuntu 14.04:llä.

Lumia 1020 tulee näkyviin ilman mitään toimenpiteitä puhelimen puolella. Tiedostot tulevat esiin vasta, kun puhelimen lukitus on avattu.

Oma 920 sama juttu. Puhelimesta pitää kerran avata näytön lukitus että tiedostoihin pääsee käsiksi. Näyttö saa yhdistämisen jälkeen sammua ja usb toimii edelleen.

6

Vaihtoehtoiset työpöytäympäristöt / Vs: Chromium ei näytä joitakin sivustoja

« : 24.12.11 - klo:21.36 »

Itselläni sivustot aukeavat ihan nätisti... Hmm... Voisiko AdBlock tai jokin sitä vastaava ohjelma estää osan sivuista? Kannattaa tarkistaa ainakin jos olet mainoksia estellyt kuten minä

7

Multimedia ja grafiikka / Vs: Näyttöjen tunnistus

« : 21.12.11 - klo:22.46 »

Nvidian ajurit ei ilmeisesti toimi nykyisillä asetuksilla. Asetuksia pääset muokkaamaan joko suoraan tiedostoa geditillä

Koodia: [Valitse]

gksu gedit  /etc/X11/xorg.conf

Tuolta sain asetettua toiseen näyttöön saman kuvan kuin toisessakin oli, mikä paransi jo merkittävästi esteettisyyttä.
Ja ohjelmapäivitykset piristävät päivää! Nyt nvidian asetusohjelma antaa säätää näytöille haluamani asetukset.

Kiitokset

8

Multimedia ja grafiikka / Näyttöjen tunnistus [Ratkaistu]

« : 19.12.11 - klo:23.10 »

Nyt kun asentelin koneelleni 11.10:n entisen 10.10:n tilalle niin totesin lähes oitis että taisipa tulla virhe tehtyä.
Paneelin toiminta takkusi pahasti ja toimintaa en kehunut hyväksi, mutta onneksi ensimmäiset 271 päivitystä korjasivat suurimman osan niistä
Digi-tv tuntuu nyt paljon tarkemmaltakin, mutta asiaan.

Koneessa on ollut kiinni 2 näyttöä (samsung ja acer), jotka ovat kooltaan samankokoisia ja ovat toimineen yhdessä laajennettuna näyttönä vanhassa kokoonpanossa, mutta nyt uusi ubuntu ei saa aceriin minkäänlaista kuvaa. Asennettaessa molemmissa näytöissä näkyi kuva vielä nätisti ilman ongelmia ja käynnistyksenlataajassakin näkyi kuva molemmilla, mutta kirjautumisruutuun saavuttaessa acer ei saanutkaan enää signaalia.
Tutkin läpi sen mitä hallitsin: näytön asetukset eivät tunnistaneet yhtään näyttöä (tuntematon), nvidian ohjauspaneelikaan ei saanut kuvaa näkyville, vaikka se osasikin nimetä liittimissä olevat näytöt. Internet ei tuottanut tulosta omalla haullani, vaikka jonkinlainen näytön tunnistus komento päätteelle löytyikin.

Nyt tarvittaisiin siis joku, joka osaa neuvoa miten saisin kerrottua ubuntulle, mitkä näytöt ovat koneessani kiinni ja mihin kuvaa lähetetään.
Näytönohjaimena on siis Nvidia GeForce 6200 jossa 512 MB muistia.


Kiitokset ajastanne

9

Yleistä keskustelua / Vs: Piristystä päivään

« : 09.05.11 - klo:22.33 »

http://aijaa.com/v.php?i=001478012609.png
Tein cd:stä kopiota, mutta nuo luvut jotenkin iskivät silmään. Miten voi ladata yli 150MiB jos tietoa löytyy vain 41MiB..? 

10

Pelit / Vs: Teeworlds ongelmia

« : 02.09.10 - klo:16.16 »

Ilman työpöytätehostieta on kokeiltu ja aina sama ongelma. Peliä pystyy pelaamaan n. 5 min ennen kuin ongelma tulee. Tällöin ruutu välähtää mustana parikertaa ja sen jälkeen kun peliä pyrkii sammuttamaan, niin  se jumii. Ennen tätä välähdystä peli ei jumi kun sen sulkee

Tämäntapainen ongelma on itsellänikin ollut. Ongelma korjaantui, kun laitoin kokoruudun pois päältä.
Syynä taitaa olla näytönsäästäjä, joka yrittää käynnistyä 5min kuluttua pelin käynnistämisestä.
Jos haluat pelata kokoruudulla , laitat vain näytönsäästäjän pois päältä, niin pelin pitäisi toimia paremmin.

11

Laitealue / Vs: Langaton gprs yhteys

« : 04.12.09 - klo:19.47 »

1) asenna gppp
2) käynnistä gppp
3) aseta modeemiksi /dev/ttyS2 (varmista laite)
4) aseta numeroksi *99#
5) aseta inittiin AT+CGDCONT=1,"IP","internet.saunalahti" (aseta APN operaattorisi mukaan, yleensä pelkkä internet)

Tuon muuten ymmärsin, mutta kohdassa 4: Pitääkö tuoho laittaa sim-kortin puhelinnumero vai pelkästään tuo *99# ?

12

Laitealue / Vs: Langaton gprs yhteys

« : 27.11.09 - klo:23.25 »

Ja vielä lisää...

Koodia: [Valitse]

[    6.575635] lp: driver loaded but no devices found
[    6.978043] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.422668] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.488878] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
[    7.539492] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input7
[    8.608272] cfg80211: Calling CRDA to update world regulatory domain
[    8.842313] yenta_cardbus 0000:00:09.0: CardBus bridge found [1734:10ab]
[    8.842339] yenta_cardbus 0000:00:09.0: Using CSCINT to route CSC interrupts to PCI
[    8.842343] yenta_cardbus 0000:00:09.0: Routing CardBus interrupts to PCI
[    8.842349] yenta_cardbus 0000:00:09.0: TI: mfunc 0x01001002, devctl 0x44
[    9.072466] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0040, PCI irq 17
[    9.072473] yenta_cardbus 0000:00:09.0: Socket status: 30000010
[    9.227582] irda_init()
[    9.227599] NET: Registered protocol family 23
[    9.461074] cfg80211: World regulatory domain updated:
[    9.461080] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.461084] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.461088] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.461092] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.461096] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.461100] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.710913] ACPI: I/O resource vt596_smbus [0x1400-0x1407] conflicts with ACPI region SM06 [0x1406-0x1406]
[    9.710921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.710932] vt596_smbus: probe of 0000:00:11.0 failed with error -16
[    9.713032] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[    9.749022] ath5k 0000:00:06.0: enabling device (0000 -> 0002)
[    9.749038]   alloc irq_desc for 19 on node -1
[    9.749042]   alloc kstat_irqs on node -1
[    9.749053] ath5k 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    9.749230] ath5k 0000:00:06.0: registered as 'phy0'
[    9.873175] ath: EEPROM regdomain: 0x30
[    9.873181] ath: EEPROM indicates we should expect a direct regpair map
[    9.873186] ath: Country alpha2 being used: AM
[    9.873188] ath: Regpair used: 0x30
[   10.011343] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   10.013513] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   10.014420] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   10.015174] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   10.016147] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   10.017006] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[   10.017029] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[   10.023827] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[   10.154826] 0.0: ttyS2 at I/O 0x3e8 (irq = 6) is a 16550A
[   10.200666] phy0: Selected rate control algorithm 'minstrel'
[   10.201529] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[   10.201580] cfg80211: Calling CRDA for country: AM
[   10.204675] cfg80211: Regulatory domain changed to country: AM
[   10.204681] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.204685] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   10.204689] (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   10.204693] (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   10.472199] __ratelimit: 3 callbacks suppressed
[   10.472205] type=1505 audit(1259353785.056:11): operation="profile_replace" pid=747 name=/sbin/dhclient3
[   10.473066] type=1505 audit(1259353785.056:12): operation="profile_replace" pid=747 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   10.473533] type=1505 audit(1259353785.056:13): operation="profile_replace" pid=747 name=/usr/lib/connman/scripts/dhclient-script
[   10.481691] type=1505 audit(1259353785.064:14): operation="profile_replace" pid=748 name=/usr/bin/evince
[   10.496699] type=1505 audit(1259353785.080:15): operation="profile_replace" pid=748 name=/usr/bin/evince-previewer
[   10.505424] type=1505 audit(1259353785.088:16): operation="profile_replace" pid=748 name=/usr/bin/evince-thumbnailer
[   10.521492] type=1505 audit(1259353785.104:17): operation="profile_replace" pid=750 name=/usr/lib/cups/backend/cups-pdf
[   10.522505] type=1505 audit(1259353785.104:18): operation="profile_replace" pid=750 name=/usr/sbin/cupsd
[   10.531013] type=1505 audit(1259353785.112:19): operation="profile_replace" pid=753 name=/usr/sbin/tcpdump
[   11.262793] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[   11.263012] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22
[   11.263017] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   11.263025]   alloc irq_desc for 22 on node -1
[   11.263028]   alloc kstat_irqs on node -1
[   11.263040] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[   11.265020] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[   11.775084] VIA 82xx Audio 0000:00:11.5: power state changed by ACPI to D0
[   11.775110] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[   11.775265] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   16.499713] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.528611] eth0: link down
[   16.528674] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.233730] ppdev: user-space parallel port driver
[   20.590611] [drm] Initialized drm 1.1.0 20060810
[   21.116507] pci 0000:01:00.0: power state changed by ACPI to D0
[   21.116534]   alloc irq_desc for 16 on node -1
[   21.116538]   alloc kstat_irqs on node -1
[   21.116550] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.117255] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[   21.338565] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   21.338595] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[   21.338605] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[   21.338695] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[   49.486733] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   49.486766] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[   49.486775] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[   49.486865] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[   67.462361] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   67.462393] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[   67.462402] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[   67.462492] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[   87.163291] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   87.163323] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[   87.163332] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[   87.163422] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[  113.307384] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[  113.307416] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[  113.307426] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[  113.307515] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[  137.109101] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[  137.109132] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[  137.109141] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[  137.109231] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[  174.858816] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[  174.858848] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[  174.858857] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[  174.858947] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[  616.658990] UDF-fs: No VRS found
[  616.658997] UDF-fs: No partition found (1)
[  616.674934] ISO 9660 Extensions: Microsoft Joliet Level 3
[  616.833012] ISOFS: changing to secondary root
[ 1142.183417] eth0: link up, 10Mbps, full-duplex, lpa 0x4461
[ 1142.183496] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1152.212049] eth0: no IPv6 routers present
[ 1268.420138] eth0: link down
[ 1352.667554] UDF-fs: No VRS found
[ 1352.667563] UDF-fs: No partition found (1)
[ 1352.682902] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1352.842108] ISOFS: changing to secondary root
[ 1707.489978] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 2673.484045] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
[ 2673.484249] pcmcia 0.0: pcmcia: registering new device pcmcia0.0
[ 2673.669137] 0.0: ttyS2 at I/O 0x3e8 (irq = 6) is a 16550A


13

Laitealue / Vs: Langaton gprs yhteys

« : 27.11.09 - klo:23.23 »

Tässä vielä jatkoa:

Koodia: [Valitse]

[    0.136699] NetLabel:  domain hash size = 128
[    0.136701] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.136722] NetLabel:  unlabeled traffic allowed by default
[    0.139403] pnp: PnP ACPI init
[    0.139444] ACPI: bus type pnp registered
[    0.147323] pnp: PnP ACPI: found 9 devices
[    0.147328] ACPI: ACPI bus type pnp unregistered
[    0.147334] PnPBIOS: Disabled by ACPI PNP
[    0.147355] system 00:05: iomem range 0xe0000-0xfffff could not be reserved
[    0.147360] system 00:05: iomem range 0xfff80000-0xffffffff has been reserved
[    0.147364] system 00:05: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.147368] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.147377] system 00:07: ioport range 0x330-0x331 has been reserved
[    0.147381] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.147385] system 00:07: ioport range 0x1000-0x107f has been reserved
[    0.147389] system 00:07: ioport range 0x1400-0x140f has been reserved
[    0.182134] AppArmor: AppArmor Filesystem Enabled
[    0.182183] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.182188] pci 0000:00:01.0:   IO window: 0xc000-0xdfff
[    0.182195] pci 0000:00:01.0:   MEM window: 0xc0000000-0xcfffffff
[    0.182202] pci 0000:00:01.0:   PREFETCH window: 0x90000000-0x9fffffff
[    0.182208] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:02
[    0.182211] pci 0000:00:09.0:   IO window: 0x001800-0x0018ff
[    0.182217] pci 0000:00:09.0:   IO window: 0x001c00-0x001cff
[    0.182223] pci 0000:00:09.0:   PREFETCH window: 0x1c000000-0x1fffffff
[    0.182229] pci 0000:00:09.0:   MEM window: 0x20000000-0x23ffffff
[    0.182250] pci 0000:00:01.0: setting latency timer to 64
[    0.182265]   alloc irq_desc for 17 on node -1
[    0.182268]   alloc kstat_irqs on node -1
[    0.182277] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.182290] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.182294] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.182298] pci_bus 0000:01: resource 0 io:  [0xc000-0xdfff]
[    0.182302] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xcfffffff]
[    0.182305] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x9fffffff]
[    0.182310] pci_bus 0000:02: resource 0 io:  [0x1800-0x18ff]
[    0.182313] pci_bus 0000:02: resource 1 io:  [0x1c00-0x1cff]
[    0.182317] pci_bus 0000:02: resource 2 pref mem [0x1c000000-0x1fffffff]
[    0.182321] pci_bus 0000:02: resource 3 mem: [0x20000000-0x23ffffff]
[    0.182379] NET: Registered protocol family 2
[    0.182513] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.182878] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.183064] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.183240] TCP: Hash tables configured (established 16384 bind 16384)
[    0.183245] TCP reno registered
[    0.183357] NET: Registered protocol family 1
[    0.183458] Trying to unpack rootfs image as initramfs...
[    0.470612] Freeing initrd memory: 7455k freed
[    0.481625] cpufreq-nforce2: No nForce2 chipset.
[    0.481672] Scanning for low memory corruption every 60 seconds
[    0.481902] audit: initializing netlink socket (disabled)
[    0.481956] type=2000 audit(1259360974.479:1): initialized
[    0.493763] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.495730] VFS: Disk quotas dquot_6.5.2
[    0.495812] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.496579] fuse init (API version 7.12)
[    0.496695] msgmni has been set to 867
[    0.496996] alg: No test for stdrng (krng)
[    0.497012] io scheduler noop registered
[    0.497015] io scheduler anticipatory registered
[    0.497018] io scheduler deadline registered
[    0.497074] io scheduler cfq registered (default)
[    0.497098] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.497164] pci 0000:01:00.0: Boot video device
[    0.497297] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.497330] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.503705] ACPI: AC Adapter [AC] (on-line)
[    0.503806] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.503812] ACPI: Power Button [PWRF]
[    0.503882] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.511567] ACPI: Lid Switch [LID]
[    0.511634] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.511641] ACPI: Sleep Button [SBTN]
[    0.511704] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    0.511708] ACPI: Power Button [PBTN]
[    0.512008] Marking TSC unstable due to TSC halts in idle
[    0.512047] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.512083] processor LNXCPU:00: registered as cooling_device0
[    0.512088] ACPI: Processor [CPU0] (supports 16 throttling states)
[    0.516059] Switched to high resolution mode on CPU 0
[    0.519612] isapnp: Scanning for PnP cards...
[    0.656115] ACPI: Battery Slot [BAT0] (battery absent)
[    0.873891] isapnp: No Plug & Play device found
[    0.875313] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.876988] brd: module loaded
[    0.877598] loop: module loaded
[    0.877703] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.878464] pata_via 0000:00:11.1: version 0.3.4
[    0.878572] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[    0.878647] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[    0.878650] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[    0.878658]   alloc irq_desc for 20 on node -1
[    0.878662]   alloc kstat_irqs on node -1
[    0.878674] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[    0.878912] scsi0 : pata_via
[    0.879046] scsi1 : pata_via
[    0.882582] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[    0.882586] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[    0.883256] Fixed MDIO Bus: probed
[    0.883309] PPP generic driver version 2.4.2
[    0.883444] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.883471] ehci_hcd 0000:00:10.3: enabling device (0000 -> 0002)
[    0.883554] ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node db816678), AE_TYPE
[    0.883566] ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 20090521 uteval-319
[    0.883574] ACPI Exception: AE_TYPE, Evaluating _CRS 20090521 pci_link-280
[    0.883580] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[    0.883584] ehci_hcd 0000:00:10.3: PCI INT D: no GSI - using IRQ 10
[    0.883623] ehci_hcd 0000:00:10.3: EHCI Host Controller
[    0.883704] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[    0.883781] ehci_hcd 0000:00:10.3: irq 10, io mem 0x24011000
[    0.892026] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    0.892129] usb usb1: configuration #1 chosen from 1 choice
[    0.892174] hub 1-0:1.0: USB hub found
[    0.892186] hub 1-0:1.0: 6 ports detected
[    0.892262] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.892288] uhci_hcd: USB Universal Host Controller Interface driver
[    0.892422] ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node db816678), AE_TYPE
[    0.892432] ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 20090521 uteval-319
[    0.892440] ACPI Exception: AE_TYPE, Evaluating _CRS 20090521 pci_link-280
[    0.892445] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[    0.892449] uhci_hcd 0000:00:10.0: PCI INT A: no GSI - using IRQ 11
[    0.892471] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.892515] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.892566] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[    0.892675] usb usb2: configuration #1 chosen from 1 choice
[    0.892709] hub 2-0:1.0: USB hub found
[    0.892733] hub 2-0:1.0: 2 ports detected
[    0.892861] ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node db816678), AE_TYPE
[    0.892871] ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 20090521 uteval-319
[    0.892879] ACPI Exception: AE_TYPE, Evaluating _CRS 20090521 pci_link-280
[    0.892884] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[    0.892888] uhci_hcd 0000:00:10.1: PCI INT B: no GSI - using IRQ 7
[    0.892908] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.892954] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.893003] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[    0.893111] usb usb3: configuration #1 chosen from 1 choice
[    0.893147] hub 3-0:1.0: USB hub found
[    0.893156] hub 3-0:1.0: 2 ports detected
[    0.893283] ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node db816678), AE_TYPE
[    0.893294] ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 20090521 uteval-319
[    0.893301] ACPI Exception: AE_TYPE, Evaluating _CRS 20090521 pci_link-280
[    0.893307] ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD]. Try pci=noacpi or acpi=off
[    0.893310] uhci_hcd 0000:00:10.2: PCI INT C: no GSI - using IRQ 5
[    0.893329] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.893374] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.893422] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[    0.893524] usb usb4: configuration #1 chosen from 1 choice
[    0.893557] hub 4-0:1.0: USB hub found
[    0.893566] hub 4-0:1.0: 2 ports detected
[    0.893698] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.905833] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.911608] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.911617] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.911621] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.911625] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.911628] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.911706] mice: PS/2 mouse device common for all mice
[    0.911927] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.911980] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.912191] device-mapper: uevent: version 1.0.3
[    0.912322] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.912388] device-mapper: multipath: version 1.1.0 loaded
[    0.912392] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.912562] EISA: Probing bus 0 at eisa.0
[    0.912572] Cannot allocate resource for EISA slot 1
[    0.912605] EISA: Detected 0 cards.
[    0.912714] cpuidle: using governor ladder
[    0.912794] cpuidle: using governor menu
[    0.913452] TCP cubic registered
[    0.913659] NET: Registered protocol family 10
[    0.914225] lo: Disabled Privacy Extensions
[    0.914612] NET: Registered protocol family 17
[    0.914637] Bluetooth: L2CAP ver 2.13
[    0.914640] Bluetooth: L2CAP socket layer initialized
[    0.914643] Bluetooth: SCO (Voice Link) ver 0.6
[    0.914646] Bluetooth: SCO socket layer initialized
[    0.914702] Bluetooth: RFCOMM TTY layer initialized
[    0.914705] Bluetooth: RFCOMM socket layer initialized
[    0.914708] Bluetooth: RFCOMM ver 1.11
[    0.914755] Using IPI No-Shortcut mode
[    0.914853] PM: Resume from disk failed.
[    0.914872] registered taskstats version 1
[    0.915002]   Magic number: 1:322:503
[    0.915141] rtc_cmos 00:03: setting system clock to 2009-11-27 22:29:35 UTC (1259360975)
[    0.915146] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.915149] EDD information not available.
[    0.921204] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.044580] ata1.00: ATA-7: FUJITSU MHV2060AT, 000000A0, max UDMA/100
[    1.044584] ata1.00: 117210240 sectors, multi 16: LBA
[    1.060442] ata1.00: configured for UDMA/100
[    1.060651] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060A 0000 PQ: 0 ANSI: 5
[    1.060816] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.060871] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    1.060933] sd 0:0:0:0: [sda] Write Protect is off
[    1.060937] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.060969] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.061144]  sda: sda1 sda2 < sda5 >
[    1.127568] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.224414] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33
[    1.240311] ata2.00: configured for UDMA/33
[    1.249335] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5
[    1.253003] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.253008] Uniform CD-ROM driver Revision: 3.20
[    1.253104] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.253169] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.253197] Freeing unused kernel memory: 540k freed
[    1.253648] Write protecting the kernel text: 4568k
[    1.253697] Write protecting the kernel read-only data: 1836k
[    1.462673] Linux agpgart interface v0.103
[    1.466433] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[    1.524867] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    1.530037] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input6
[    1.530106] ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)
[    1.601058] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xa0000000
[    1.601629] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23
[    1.601634] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
[    1.601642]   alloc irq_desc for 23 on node -1
[    1.601646]   alloc kstat_irqs on node -1
[    1.601659] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKB] -> GSI 23 (level, low) -> IRQ 23
[    1.611496] eth0: VIA Rhine II at 0xd0000000, 00:40:d0:86:9c:1a, IRQ 23.
[    1.612241] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[    2.467403] PM: Starting manual resume from disk
[    2.467410] PM: Resume from partition 8:5
[    2.467413] PM: Checking hibernation image.
[    2.467634] PM: Resume from disk failed.
[    2.504052] EXT4-fs (sda1): barriers enabled
[    2.535965] kjournald2 starting: pid 330, dev sda1:8, commit interval 5 seconds
[    2.535986] EXT4-fs (sda1): delayed allocation enabled
[    2.535991] EXT4-fs: file extents enabled
[    2.544384] EXT4-fs: mballoc enabled
[    2.544407] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    3.412088] type=1505 audit(1259360977.996:2): operation="profile_load" pid=353 name=/sbin/dhclient3
[    3.412942] type=1505 audit(1259360977.996:3): operation="profile_load" pid=353 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    3.413403] type=1505 audit(1259360977.996:4): operation="profile_load" pid=353 name=/usr/lib/connman/scripts/dhclient-script
[    3.498671] type=1505 audit(1259360978.080:5): operation="profile_load" pid=354 name=/usr/bin/evince
[    3.513060] type=1505 audit(1259360978.096:6): operation="profile_load" pid=354 name=/usr/bin/evince-previewer
[    3.521489] type=1505 audit(1259360978.104:7): operation="profile_load" pid=354 name=/usr/bin/evince-thumbnailer
[    3.550206] type=1505 audit(1259360978.132:8): operation="profile_load" pid=356 name=/usr/lib/cups/backend/cups-pdf
[    3.551216] type=1505 audit(1259360978.132:9): operation="profile_load" pid=356 name=/usr/sbin/cupsd
[    4.405420] Adding 1301224k swap on /dev/sda5.  Priority:-1 extents:1 across:1301224k
[    4.916153] EXT4-fs (sda1): internal journal on sda1:8
[    5.012793] udev: starting version 147


14

Laitealue / Vs: Langaton gprs yhteys

« : 27.11.09 - klo:23.20 »

Miten saan Fujitsu Siemenssin kannettavaan Sony Ericssonin GC85 EDGE PC Card laitteen toimimaan?
Suomeksi tuo on siis langaton gprs-yhteys.
Ohjeet saavat olla englanniksikin, kunhan ovat selkeät.
Yritin itse asentaa laitteen kuntoon tällä ohjeella http://ubuntuforums.org/showthread.php?t=47305&highlight=GC85
mutta se ei onnistunut.

Jos kaikki menee putkeen ameriikan elokuvissa ja laite on tuettuna niin sehän pitäisi näkyä kuten USB-porttiin liitettävät mokkulat. Ilmeisesti näin ei käynyt.

Tökkää kortti sisään ja katso dmesg-komennolla päätteestä mitä se kirjoittelee. Sen kun annat tänne analysoitavaksi niin eiköhän selviä.

Antti

Tällaista tuli:

Koodia: [Valitse]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.31-15-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 (Ubuntu 2.6.31-15.50-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001bfef000 (usable)
[    0.000000]  BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data)
[    0.000000]  BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] last_pfn = 0x1bfef max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FF0000000 write-back
[    0.000000]   1 base 010000000 mask FF8000000 write-back
[    0.000000]   2 base 018000000 mask FFC000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000001bfef000 (usable)
[    0.000000]  modified: 000000001bff0000 - 000000001bffffc0 (ACPI data)
[    0.000000]  modified: 000000001bffffc0 - 000000001c000000 (ACPI NVS)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-000000001bfef000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001bc00000 page 2M
[    0.000000]  001bc00000 - 001bfef000 page 4k
[    0.000000] kernel direct mapping tables up to 1bfef000 @ 7000-c000
[    0.000000] RAMDISK: 148eb000 - 15032cdb
[    0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00)
[    0.000000] ACPI: RSDT 1bffc3c0 0002C (v01 INSYDE FACP_000 00000100 0000 00010200)
[    0.000000] ACPI: FACP 1bfffb10 00074 (v01 INSYDE FACP_000 00000100 0000 00010200)
[    0.000000] ACPI: DSDT 1bffc400 03709 (v01 MTC___ 8650____ 00001000 INTL 02002036)
[    0.000000] ACPI: FACS 1bffffc0 00040
[    0.000000] ACPI: APIC 1bfffba0 0005A (v01 INSYDE APIC_000 30303030 0000 00010200)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 447MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1bfef000
[    0.000000]   low ram: 0 - 1bfef000
[    0.000000]   node 0 low ram: 00000000 - 1bfef000
[    0.000000]   node 0 bootmap 00008000 - 0000b800
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 001bfef000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008a80a0]    TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[    0.000000]   #4 [00148eb000 - 0015032cdb]          RAMDISK ==> [00148eb000 - 0015032cdb]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00008a9000 - 00008ac108]              BRK ==> [00008a9000 - 00008ac108]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000c000]          BOOTMAP ==> [0000008000 - 000000c000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001bfef
[    0.000000]   HighMem  0x0001bfef -> 0x0001bfef
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001bfef
[    0.000000] On node 0 totalpages: 114570
[    0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 864 pages used for memmap
[    0.000000]   Normal zone: 109711 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3f80000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages at c1382000, static data 35612 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113674
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-15-generic root=UUID=f1e58dd5-f014-4b8e-8f0b-0c8df8be72e2 ro quiet splash
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2293420 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 436372k/458684k available (4566k kernel code, 21632k reserved, 2142k data, 540k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xdc7ef000 - 0xff7fe000   ( 560 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdbfef000   ( 447 MB)
[    0.000000]       .init : 0xc078e000 - 0xc0815000   ( 540 kB)
[    0.000000]       .data : 0xc0575b44 - 0xc078d3c8   (2142 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0575b44   (4566 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1492.743 MHz processor.
[    0.001472] Console: colour VGA+ 80x25
[    0.001478] console [tty0] enabled
[    0.001548] Calibrating delay loop (skipped), value calculated using timer frequency.. 2985.48 BogoMIPS (lpj=5970972)
[    0.001577] Security Framework initialized
[    0.001611] AppArmor: AppArmor initialized
[    0.001623] Mount-cache hash table entries: 512
[    0.001807] Initializing cgroup subsys ns
[    0.001815] Initializing cgroup subsys cpuacct
[    0.001821] Initializing cgroup subsys memory
[    0.001833] Initializing cgroup subsys freezer
[    0.001836] Initializing cgroup subsys net_cls
[    0.001859] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.001863] CPU: L2 cache: 1024K
[    0.001870] mce: CPU supports 5 MCE banks
[    0.001882] CPU0: Thermal monitoring enabled (TM1)
[    0.001894] Performance Counters: p6 PMU driver.
[    0.001916] ... version:                 0
[    0.001918] ... bit width:               32
[    0.001921] ... generic counters:        2
[    0.001923] ... value mask:              00000000ffffffff
[    0.001926] ... max period:              000000007fffffff
[    0.001929] ... fixed-purpose counters:  0
[    0.001931] ... counter mask:            0000000000000003
[    0.001937] Checking 'hlt' instruction... OK.
[    0.017157] SMP alternatives: switching to UP code
[    0.024021] Freeing SMP alternatives: 19k freed
[    0.024036] ACPI: Core revision 20090521
[    0.037199] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.077857] CPU0: Intel(R) Celeron(R) M processor         1.50GHz stepping 08
[    0.080001] Brought up 1 CPUs
[    0.080001] Total of 1 processors activated (2985.48 BogoMIPS).
[    0.080001] CPU0 attaching NULL sched-domain.
[    0.080001] Booting paravirtualized kernel on bare hardware
[    0.080001] regulator: core version 0.5
[    0.080001] Time: 22:29:34  Date: 11/27/09
[    0.080001] NET: Registered protocol family 16
[    0.080001] EISA bus registered
[    0.080001] ACPI: bus type pci registered
[    0.080001] PCI: PCI BIOS revision 2.10 entry at 0xe9c04, last bus=1
[    0.080001] PCI: Using configuration type 1 for base access
[    0.080001] bio: create slab <bio-0> at 0
[    0.080001] ACPI: EC: Look up EC in DSDT
[    0.084657] ACPI: Interpreter enabled
[    0.084667] ACPI: (supports S0 S1 S3 S4 S5)
[    0.084700] ACPI: Using IOAPIC for interrupt routing
[    0.084980] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.114557] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[    0.114561] ACPI: EC: driver started in interrupt mode
[    0.114759] ACPI: No dock devices found.
[    0.114955] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.115020] pci 0000:00:00.0: reg 10 32bit mmio: [0xa0000000-0xa7ffffff]
[    0.115393] pci 0000:00:01.0: supports D1
[    0.115439] pci 0000:00:06.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[    0.115536] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.115559] pci 0000:00:09.0: supports D1 D2
[    0.115563] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.115569] pci 0000:00:09.0: PME# disabled
[    0.115638] pci 0000:00:10.0: reg 20 io port: [0x1200-0x121f]
[    0.115671] pci 0000:00:10.0: supports D1 D2
[    0.115674] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.115680] pci 0000:00:10.0: PME# disabled
[    0.115740] pci 0000:00:10.1: reg 20 io port: [0x1220-0x123f]
[    0.115773] pci 0000:00:10.1: supports D1 D2
[    0.115776] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.115782] pci 0000:00:10.1: PME# disabled
[    0.115842] pci 0000:00:10.2: reg 20 io port: [0x1240-0x125f]
[    0.115875] pci 0000:00:10.2: supports D1 D2
[    0.115878] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.115883] pci 0000:00:10.2: PME# disabled
[    0.115922] pci 0000:00:10.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[    0.115976] pci 0000:00:10.3: supports D1 D2
[    0.115979] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.115985] pci 0000:00:10.3: PME# disabled
[    0.116076] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.116085] pci 0000:00:11.0: quirk: region 1000-107f claimed by vt8235 PM
[    0.116091] pci 0000:00:11.0: quirk: region 1400-140f claimed by vt8235 SMB
[    0.116173] pci 0000:00:11.1: reg 20 io port: [0x1100-0x110f]
[    0.116252] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff]
[    0.116308] pci 0000:00:11.5: supports D1 D2
[    0.116349] pci 0000:00:11.6: reg 10 io port: [0xe100-0xe1ff]
[    0.116444] pci 0000:00:12.0: reg 10 io port: [0xe200-0xe2ff]
[    0.116453] pci 0000:00:12.0: reg 14 32bit mmio: [0xd0000000-0xd00000ff]
[    0.116503] pci 0000:00:12.0: supports D1 D2
[    0.116506] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116511] pci 0000:00:12.0: PME# disabled
[    0.116579] pci 0000:01:00.0: reg 10 32bit mmio: [0x90000000-0x93ffffff]
[    0.116588] pci 0000:01:00.0: reg 14 32bit mmio: [0xc0000000-0xc0ffffff]
[    0.116612] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[    0.116635] pci 0000:01:00.0: supports D1 D2
[    0.116681] pci 0000:00:01.0: bridge io port: [0xc000-0xdfff]
[    0.116687] pci 0000:00:01.0: bridge 32bit mmio: [0xc0000000-0xcfffffff]
[    0.116693] pci 0000:00:01.0: bridge 32bit mmio pref: [0x90000000-0x9fffffff]
[    0.116724] pci_bus 0000:00: on NUMA node 0
[    0.116731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.134162] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[    0.134320] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
[    0.134467] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[    0.134613] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
[    0.134737] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.134861] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.134985] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.135109] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[    0.135248] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[    0.135411] ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
[    0.135649] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
[    0.135733] ACPI Warning: \_SB_.PCI0.ALKD._CRS: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940
[    0.135742] ACPI Error (uteval-0313): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node db816678), AE_TYPE
[    0.135754] ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 20090521 uteval-319
[    0.135761] ACPI Exception: AE_TYPE, Evaluating _CRS 20090521 pci_link-280
[    0.135766] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
[    0.136012] SCSI subsystem initialized
[    0.136097] libata version 3.00 loaded.
[    0.136195] usbcore: registered new interface driver usbfs
[    0.136220] usbcore: registered new interface driver hub
[    0.136253] usbcore: registered new device driver usb
[    0.136432] ACPI: WMI: Mapper loaded
[    0.136435] PCI: Using ACPI for IRQ routing
[    0.136644] Bluetooth: Core ver 2.15
[    0.136686] NET: Registered protocol family 31
[    0.136689] Bluetooth: HCI device and connection manager initialized
[    0.136694] Bluetooth: HCI socket layer initialized
[    0.136697] NetLabel: Initializing


15

Laitealue / Langaton gprs yhteys

« : 27.11.09 - klo:23.03 »

Miten saan Fujitsu Siemenssin kannettavaan Sony Ericssonin GC85 EDGE PC Card laitteen toimimaan?
Suomeksi tuo on siis langaton gprs-yhteys.
Ohjeet saavat olla englanniksikin, kunhan ovat selkeät.
Yritin itse asentaa laitteen kuntoon tällä ohjeella http://ubuntuforums.org/showthread.php?t=47305&highlight=GC85
mutta se ei onnistunut.

16

Multimedia ja grafiikka / Vs: Näytä työpöytäsi

« : 19.11.09 - klo:22.46 »

Tälläinen tällä kertaa. Metacity-teemana on joku Blended modi, ja kuvaketeemana on Chromo-Erectus. Gnome Color Chooserilla tuli tuunattua jälleen aika paljon. Lisäksi vaihdoin paneelin vetolaatikon Suosikit-valikkoon joka toimii paremmin.

Milloin Steam oikein ilmestyi linuxille, vai pyöritätkö sitä winellä?

17

Yleistä keskustelua / Vs: Piristystä päivään

« : 08.11.09 - klo:18.33 »

Tällaista saa Ruotsissa kioskista.

Itsekin huomasin ubuntu colaa tölkissä Ruotsin metroasemalla. Onko ubuntu ruotsissa niin suosittu, että sille pitää tehdä oma colakin?

18

Yleistä keskustelua / Vs: Piristystä päivään

« : 02.11.09 - klo:17.41 »

Eikös tästä ole jo puhuttu monta sivua ei ole virus tai troijjalainen jos sen itse joutuu ajamaan.

Ei se olekaan oikea virus. Miksi minä nyt ubuntuun viruksia kehittäisin?

19

Yleistä keskustelua / Vs: Piristystä päivään

« : 31.10.09 - klo:23.26 »

http://www.gigasize.com/get.php?d=3orwrxhrmnc
Tein tuollaisen "viruksen" teitä varten. Siihen tuli virheitä, mutta toivottavasti pystytte edes lataamaan tiedostoni
Ensin valitset tiedoston hiiren oikealla -> ominaisuudet -> oikeudet -> Salli tiedoston suoritus ohjelmana
Sen jälkeen avaat tiedoston ja suoritat sen.

Älä suorita sitä päätteessä sillä silloin ohjelma ei toimi kunnolla.
Enkä lupaa että koneesi toimii enää tämän jälkeen

20

Multimedia ja grafiikka / Vs: Näytä työpöytäsi

« : 28.08.09 - klo:15.31 »

Miten olis xpde tai xpgnome

http://www.xpde.com/ - On oma distronsa mutta who gares. 
http://ubuntu.online02.com/node/14

Toi xpGnome helpottaa paljonkin xp:ksi muuttamista  Kiitos