Viestit

1

Laitealue / Vs: TwinView toimimaan nvidiassa?

« : 15.06.08 - klo:11.10 »

Sain cofigin toimiin, listaan nyt tähän vielä toimivan konfigin, jos joku painii saman ongelman parissa..

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Thu Feb 14 18:21:33 PST 2008


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "BenQ FP93G"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "BenQ FP93G"
    HorizSync       31.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600 GT"
EndSection

Section "Device"
    Identifier     "Videocard1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600 GT"
    BusID          "PCI:2:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Videocard0"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: 1280x1024 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "TwinView" "0"
# Removed Option "TwinViewXineramaInfoOrder" "DFP-0"
# Removed Option "metamodes" "DFP-0: 1280x1024 +0+0"
# Removed Option "TwinViewXineramaInfoOrder" "DFP-1"
# Removed Option "metamodes" "DFP-0: 1280x1024 +1280+0, DFP-1: 1280x1024 +0+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

2

Laitealue / TwinView toimimaan nvidiassa? [Nyt toimii]

« : 14.06.08 - klo:16.25 »

Osaisko joku neuvoa mitä pitäisi konfikkiin lisätä, että saan toisen samanlaisen näytön rinnalle??
Näytöt 19" DVI liitännällä ja pitäisi saada työpöytä isommaksi 

Yritin etsiä vastaavia, mutta aina on toisena tv clonena..

XORG.CONF:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Thu Feb 14 18:20:37 PST 2008

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Default Screen" 0 0
    InputDevice    "Generic Keyboard" "CoreKeyboard"
    InputDevice    "Configured Mouse" "CorePointer"
EndSection

Section "Module"
    Load           "glx"
    Load           "v4l"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fi"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "Emulate3Buttons" "true"
EndSection

Section "Monitor"
    Identifier     "Configured Monitor"
    VendorName     "Plug 'n' Play"
    ModelName      "Plug 'n' Play"
    Gamma           1
    ModeLine       "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine       "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine       "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine       "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
    ModeLine       "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine       "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine       "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine       "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine       "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
    ModeLine       "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine       "1280x960@75" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine       "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine       "1400x1050@75" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine       "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
    VendorName     "NVIDIA"
    BoardName      "GeForce 8600 GT"
    Screen          0
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Virtual     1280 1024
        Depth       24
        Modes      "1280x1024@75" "800x600@75" "800x600@56" "800x600@60" "640x480@75" "832x624@75" "640x480@72" "1024x768@75" "640x480@60" "1024x768@70" "1024x768@60" "1152x864@75" "800x600@72" "1280x960@60" "1280x1024@60" "1280x960@75" "1400x1050@60" "1400x1050@75" "1600x1200@65" "1600x1200@60" "1792x1344@60"
    EndSubSection
EndSection

3

Asentaminen ja käyttöönotto / Vs: Nvidia ajurit ei asennu

« : 26.05.08 - klo:19.58 »

ei näytä tuo tiedosto sisältävän mitään.. /etc/apt/sources.list

tällaista:

# deb cdrom:[Ubuntu 7.10 _Gutsy Gibbon_ - Release i386 (20071016)]/ gutsy main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.

# Line commented out by installer because it failed to verify:
# deb http://fi.archive.ubuntu.com/ubuntu/ gutsy main restricted
# Line commented out by installer because it failed to verify:
# deb-src http://fi.archive.ubuntu.com/ubuntu/ gutsy main restricted

## Major bug fix updates produced after the final release of the
## distribution.
# Line commented out by installer because it failed to verify:
# deb http://fi.archive.ubuntu.com/ubuntu/ gutsy-updates main restricted
# Line commented out by installer because it failed to verify:
# deb-src http://fi.archive.ubuntu.com/ubuntu/ gutsy-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
# Line commented out by installer because it failed to verify:
# deb http://fi.archive.ubuntu.com/ubuntu/ gutsy universe
# Line commented out by installer because it failed to verify:
# deb-src http://fi.archive.ubuntu.com/ubuntu/ gutsy universe
# Line commented out by installer because it failed to verify:
# deb http://fi.archive.ubuntu.com/ubuntu/ gutsy-updates universe
# Line commented out by installer because it failed to verify:
# deb-src http://fi.archive.ubuntu.com/ubuntu/ gutsy-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
# Line commented out by installer because it failed to verify:
# deb http://fi.archive.ubuntu.com/ubuntu/ gutsy multiverse
# Line commented out by installer because it failed to verify:
# deb-src http://fi.archive.ubuntu.com/ubuntu/ gutsy multiverse
# Line commented out by installer because it failed to verify:
# deb http://fi.archive.ubuntu.com/ubuntu/ gutsy-updates multiverse
# Line commented out by installer because it failed to verify:
# deb-src http://fi.archive.ubuntu.com/ubuntu/ gutsy-updates multiverse

## Uncomment the following two lines to add software from the 'backports'
## repository.
## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
# deb http://fi.archive.ubuntu.com/ubuntu/ gutsy-backports main restricted universe multiverse
# deb-src http://fi.archive.ubuntu.com/ubuntu/ gutsy-backports main restricted universe multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository. This software is not part of Ubuntu, but is
## offered by Canonical and the respective vendors as a service to Ubuntu
## users.
# deb http://archive.canonical.com/ubuntu gutsy partner
# deb-src http://archive.canonical.com/ubuntu gutsy partner

# Line commented out by installer because it failed to verify:
# deb http://security.ubuntu.com/ubuntu gutsy-security main restricted
# Line commented out by installer because it failed to verify:
# deb-src http://security.ubuntu.com/ubuntu gutsy-security main restricted
# Line commented out by installer because it failed to verify:
# deb http://security.ubuntu.com/ubuntu gutsy-security universe
# Line commented out by installer because it failed to verify:
# deb-src http://security.ubuntu.com/ubuntu gutsy-security universe
# Line commented out by installer because it failed to verify:
# deb http://security.ubuntu.com/ubuntu gutsy-security multiverse
# Line commented out by installer because it failed to verify:
deb http://archive.ubuntu.com/ubuntu/ hardy main
# deb-src http://security.ubuntu.com/ubuntu gutsy-security multiverse

Eli eikö nuo oo vaan niinku kommentteja?

4

Asentaminen ja käyttöönotto / Nvidia ajurit ei asennu

« : 18.05.08 - klo:18.49 »

Mikähän mahtaisi olla vikana kun en saa ajureita käyttöön?
Olen yrittänyt parina päivänä asentaa ja kokeillut useita ohjeita.. nvidia-glx (nvidia-glx-new) pakettia ei löydy.. tuohon yleensä tökkää. Pitääkö paketti hakea erikseen jostain?? "Hardware drivers"-toiminnossa ei enää edes näy koko nvidiaa...

ajureita tarvin, koska pitäisi saada twinview toimiin..

Näytönohjain NV GF 8600 GT, ubuntu 8.04

5

Laitealue / Vs: USB WLan-tikun asennus

« : 01.05.08 - klo:01.08 »

Niin voisko joku vielä opastaa tuon ndiswrapperin?? miten se asennus käytännössä onnistuu? eli vaihe vaiheelta kiitos!

6

Laitealue / Vs: USB WLan-tikun asennus

« : 21.04.08 - klo:11.08 »

Jos joku vielä viittis vähä avittaa että miten ne asennetaan käyttöön? Pitääkö tuo kerneli jotenki ladata ja sitte asentaa?? ku ei ole ihan perillä näistä linukseista (vielä )

olen yrittänyt selailla opuksia mutta ku ei oikee aukene tuo kernelihommeli..

7

Laitealue / Vs: USB WLan-tikun asennus

« : 21.04.08 - klo:00.41 »

Kokeilin tuota lsusb -v -d  tuohon MelCo., Inc , koska se oli ainoa jonka sain yhdistettyä tuohon buffaloon (laitehallinnasta löytyi sama ID buffalon kortille)
Alla listaus, (joka saattaa olla hieman hankala luettava)

mika@mika-desktop:~$ lsusb
Bus 002 Device 003: ID 0411:00bc MelCo., Inc.
Bus 002 Device 001: ID 0000:0000 
Bus 001 Device 002: ID 0471:0815 Philips
Bus 001 Device 001: ID 0000:0000 
mika@mika-desktop:~$ lsusb -v -d 0411:00bc
Bus
002 Device 003: ID 0411:00bc MelCo., Inc.

Device Descriptor:
bLength                18
bDescriptorType         1
bcdUSB               2.00
bDeviceClass            2
Communications
bDeviceSubClass         0
bDeviceProtocol         0
bMaxPacketSize0        64
idVendor           0x0411 MelCo., Inc.
idProduct          0x00bc
bcdDevice            0.06
iManufacturer           1
iProduct                2
iSerial                 3
bNumConfigurations      1
Configuration Descriptor:
bLength                 9   
bDescriptorType         2   
wTotalLength           48   
bNumInterfaces          2   
bConfigurationValue     1   
iConfiguration          0     
bmAttributes         0x80     
(Bus Powered)   
MaxPower              500mA   
Interface Descriptor:     
bLength                 9     
bDescriptorType         4     
bInterfaceNumber        0     
bAlternateSetting       0     
bNumEndpoints           1     
bInterfaceClass         2 Communications     
bInterfaceSubClass      2 Abstract (modem)     
bInterfaceProtocol    255 Vendor Specific (MSFT RNDIS?)     
iInterface              0
      Endpoint Descriptor:       
bLength                 7       
bDescriptorType         5       
bEndpointAddress     0x81  EP 1 IN       
bmAttributes            3         
Transfer Type            Interrupt         
Synch Type               None         
Usage Type               Data       
wMaxPacketSize     0x0010  1x 16 bytes       
bInterval               4   
Interface Descriptor:     
bLength                 9     
bDescriptorType         4     
bInterfaceNumber        1     
bAlternateSetting       0     
bNumEndpoints           2     
bInterfaceClass        10 CDC Data     
bInterfaceSubClass      0 Unused     
bInterfaceProtocol      0       
iInterface              0       
Endpoint Descriptor:       
bLength                 7       
bDescriptorType         5       
bEndpointAddress     0x82  EP 2 IN       
bmAttributes            2         
Transfer Type            Bulk         
Synch Type               None         
Usage Type               Data       
wMaxPacketSize     0x0200  1x 512 bytes       
bInterval               0     
Endpoint Descriptor:       
bLength                 7       
bDescriptorType         5       
bEndpointAddress     0x03  EP 3 OUT       
bmAttributes            2         
Transfer Type            Bulk         
Synch Type               None         
Usage Type               Data       
wMaxPacketSize     0x0200  1x 512 bytes       
bInterval               1
can't get device qualifier:
Operation not permitted
can't get debug descriptor:
Operation not permitted
cannot read device status,
Operation not permitted (1)

8

Laitealue / USB WLan-tikun asennus

« : 20.04.08 - klo:22.43 »

Hei, Voisiko joku opastaa aloittelijaa, kun ei oikein onnistu wlan-tikun asennus. Löytin lontoon murteella ohjeet, mutta ei ihan auennut. En ole ennen asentanut linuxiin ajureita/ohjelmia, joten jos kertoisitta vaihe vaiheelta niin saisin edes netin toimiin...
wlan-soviti: Buffalo WLI-U2-KG54L.

asensin käyttöön nuo ndiswrapper -jutut ja latasin ajurit työpöydälle, mutta sitte meni vähä sormi suuhun.. kokeilin ajaa ajurikansiossa komentoa ndiswrapper -i NETU2G54.INF, mutta herjas jotain.

Tällaiset ohjeet löysin:

i managed to get a Buffalo WLI-U2-KG54L wireless USB stick working on 64studio 2.0.

get ndiswrapper and the driver downloadable from

cd to the directory after extraction and type

make

and then as root

make install

get the buffalo driver from

http://www.buffalo-technology.com/su...01-02-0002.zip

go into the [driver]/Win2000 folder and in a terminal type

ndiswrapper -i NETU2G54.INF

check it detects the driver with

ndiswrapper -l

it should show

(driver present bla bla)
(device present bla bla)

something like the above.

if it does work, add to the bottom of /etc/modules

modprobe ndiswrapper

and save. it should then work

i hope this helps and any errors that you may get, please return to me and i will try and sort it