Ubuntu 24.04.1 LTS | Lataa ja asenna | Tutustu yhteisöön | Blogi | Yritysten tarjoamat palvelut
Uusimmat julkaisut: 24.04.1 LTS (suositeltu, 29.8.2024) ja 24.10 - Ubuntun 20-vuotisjulkaisu! (10.10.2024).
Näytä kirjoitukset
Tässä osiossa voit tarkastella kaikkia tämän jäsenen viestejä. Huomaa, että näet viestit vain niiltä alueilta, joihin sinulla on pääsy.
sudo ./seamonkey-installer
./seamonkey-installer-bin: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directoryTuosta ei saa selevää täysjärkinen. En ainakaan minä 
[code][quote author=Jan1 link=topic=10145.msg72243#msg72243 date=1178383407]
OPENBOX TUTORIAALI
Aluksi tahdon kiittää raimoa, joka neuvoi minua alunperin openboxin käytössä. Ilman häntä olisin luultavasti kyllästynyt jo alussa. Paljon sitä silloin taisteltiin ja raimo korjaili vesipumppua joka oli poksahtanut ja taisipa tuo käydä omaa taisteluaan jotain kottikärryn rengasta vastaan. Kiitos kärsivällisyydestä.
Openbox on hyvin kevyt ikkunointiohjelma, X-ikkunointia tukeville käyttöjärjestelmille. Jos et ole valmis työpöytään, jota säädellään päätteen kautta varsin paljon tekstieditorin avulla, tämä opas ei ole sinulle. Openbox ei ole sinulle "se oikea."
Openboxin asennus:
Se on helppoa, aukaise pääte (terminal) ja kirjoita/kopioi siihen tämä:
[code]sudo apt-get install openbox openbox-themes obconf adesklets idesk rox-filer pypanelcd
cp /usr/share/idesk/dot.ideskrc ~/.ideskrc
gedit .ideskrc
#Vaihdat nyt tulevan taustakuvan nimen Bacground.File riviin. Eli taustakuvan pitää olla samalla nimellä.
Background.File: ~/.idesktop/rain.jpg
cd ~/.idesktop
mkdir .idesktop
#Nyt haetaan haluamasi kuva, sen pitää olla TÄYSIN samalla nimellä tai se ei toimi. Nimenhän voi aina muokata.
wget http://www.linuxwallpapers.org/linux/rain.jpg
#käynnistä idesk ja taustakuva tulee näkyviin.
idesk &cd
mkdir adesklets
cd adesklets
wget http://switch.dl.sourceforge.net/sourceforge/adesklets/weather-0.0.4.tar.bz2
wget http://switch.dl.sourceforge.net/sourceforge/adesklets/modubar-0.0.1.tar.bz2
#puretaan ladatut tavarat, ole edelleen samassa hakemistossa.
tar -xvvf weather-0.0.4.tar.bz2
tar -xvvf modubar-0.0.1.tar.bz2
#Asetuksia pitäisi vielä säätää, mutta rekataan eka adskletit:
cd weather-0.0.4
#Nyt sinun pitäisi olla ~/adesklets/weather-0.0.4 hakemistossa.
./weather.py
#Paina r, mitään erikoista ei vielä tapahdu.
(tuossa tulee ongelmia)# This is adesklets configuration file.
#
# It gets automatically updated every time a desklet main window
# parameter is changed, so avoid manual modification whenever
# a desklet is running. In fact, manual changes to this file
# should rarely be needed. See `info adesklets'.
[/home/jani/adesklets/weather-0.0.4/weather.py]
id=0 screen=0 x=0 y=0
[/home/jani/adesklets/modubar-0.0.1/modubar.py]
id=0 screen=0 x=0 y=0
tekstieditorisi ~/.pypanelrc etsi sieltä P_LOCATION ja muuta siihen 0. Nyt paneeli tulee ylös.table Icon
Caption: Ubuntulandia
Command: firefox http://ubuntu.com/
Icon: /usr/share/pixmaps/firefox.png
Width: 48
Height: 48
X: 33
Y: 68
end
table Config
FontName: VeraBd
FontSize: 14
FontColor: #60C060
ToolTip.FontSize: 14
ToolTip.FontName: VeraBd
ToolTip.ForeColor: #000000
ToolTip.BackColor: #FFFFFF
ToolTip.CaptionOnHover: false
ToolTip.CaptionPlacement: Right
Locked: false
Transparency: 60
Shadow: false
ShadowColor: #000000
ShadowX: 1
ShadowY: 1
Bold: true
ClickDelay: 300
IconSnap: true
SnapWidth: 10
SnapHeight: 10
SnapOrigin: BottomRight
SnapShadow: false
SnapShadowTrans: 200
CaptionOnHover: false
CaptionPlacement: bottom
FillStyle: none
Background.Delay: 0
Background.Source: None
Background.File: ~/.idesktop/rain.jpg
Background.Mode: Scale
Background.Color: #CCDCCC
end
table Actions
Lock: control right doubleClk
Reload: middle doubleClk
Drag: left hold
EndDrag: left singleClk
Execute[0]: left doubleClk
Execute[1]: right doubleClk
end
#------------------------------------------------------------------------------
#
# PyPanel v2.4 Configuration
#
# This configuration file is a Python script that will be executed when
# PyPanel is started. In order for PyPanel to start properly, make sure that
# this file contains proper Python formatting and no syntax errors.
#------------------------------------------------------------------------------
VERSION = 2.4 # Config file version
#------------------------------------------------------------------------------
# Colors: Format is hex triplet - 0xrrggbb
#------------------------------------------------------------------------------
BG_COLOR = "0xc6f6c6" # Panel background and tinting color
TASK_COLOR = "0x80B080" # Normal task name color
FOCUSED_COLOR = "0x80C080" # Focused task name color
SHADED_COLOR = "0x808080" # Shaded task name color
MINIMIZED_COLOR = "0x808080" # Minimized task name color
DESKTOP_COLOR = "0x80B080" # Desktop name color
CLOCK_COLOR = "0x80B080" # Clock text color
LINE_COLOR = "0x606060" # Vertical line color
# Text Shadow Colors
TASK_SHADOW_COLOR = "0xffffff"
FOCUSED_SHADOW_COLOR = "0xffffff"
SHADED_SHADOW_COLOR = "0xffffff"
MINIMIZED_SHADOW_COLOR = "0xffffff"
DESKTOP_SHADOW_COLOR = "0xffffff"
CLOCK_SHADOW_COLOR = "0xffffff"
#------------------------------------------------------------------------------
# Panel Spacing and Location Options: Measured in pixels
#------------------------------------------------------------------------------
P_LOCATION = 0 # Panel placement: 0 = top, 1 = bottom
P_WIDTH = 0 # Panel width: 0 = Use full screen width
P_START = 0 # Starting X coordinate of the panel
P_SPACER = 6 # Spacing between panel objects
P_HEIGHT = 24 # Panel height
#------------------------------------------------------------------------------
# Icon Size Options: Measured in pixels
#------------------------------------------------------------------------------
I_HEIGHT = 16 # Panel application icon height
I_WIDTH = 16 # Panel application icon Width
APPL_I_HEIGHT = 24 # Application launcher icon height
APPL_I_WIDTH = 24 # Application launcher icon width
TRAY_I_HEIGHT = 24 # System tray icon height (usually 16 or 24)
TRAY_I_WIDTH = 24 # System tray icon width (usually 16 or 24)
# If TRAY_I_WIDTH is set to 0, then the
# width specified by the tray app will be used
#------------------------------------------------------------------------------
# Panel Clock Format: 'man strftime' for detailed formatting options and help
#------------------------------------------------------------------------------
CLOCK_FORMAT = "%d.%m.%Y" # Ex: 2004-09-25 17:45 now %d.%m.%Y = 21.07.2006
#------------------------------------------------------------------------------
# Clock Delay: Seconds between each clock update during periods of inactivity
#------------------------------------------------------------------------------
CLOCK_DELAY = 20
#------------------------------------------------------------------------------
# Hidden Application List: Apps listed here will not be display on the panel
# The application name is its WM_CLASS name, use 'xprop' to find WM_CLASS
# Ex: ["xmms", "xine", "gDesklets"]
#------------------------------------------------------------------------------
HIDE_LIST = []
#------------------------------------------------------------------------------
# Hidden Panel Size: Size of the panel when it's hidden/minimized
#------------------------------------------------------------------------------
HIDDEN_SIZE = 2
#------------------------------------------------------------------------------
# Panel Text Font: This option takes either a traditional or Xft font string
# Ex: "-schumacher-clean-medium-r-normal-*-12-*-*-*-*-*-*-*"
# "aquafont-8"
#------------------------------------------------------------------------------
FONT = "bitstream vera sans-13"
#------------------------------------------------------------------------------
# Show All Applications: Show apps from all desktops or just the current
# 0: Disabled - Only applications on the current desktop will be displayed
# 1: Enabled - Selected apps are moved to the current desktop
# 2: Enabled - Current desktop is changed to the selected apps desktop
#------------------------------------------------------------------------------
SHOWALL = 0 # 0, 1 or 2 - see descriptions above
#------------------------------------------------------------------------------
# Show Minimized/Iconified Applications: Show only minimized apps or all apps
# 0: Disabled - Show all applications on the panel
# 1: Enabled - Show only minimized apps on the panel
#------------------------------------------------------------------------------
SHOWMINIMIZED = 0
#------------------------------------------------------------------------------
# Application Icon List: List of custom icons for specific applications
# The application name is its WM_CLASS name, use 'xprop' to find WM_CLASS
#
# The "default" entry is used for applications with no icon. If left "",
# PyPanel will use the default icon distributed with the source.
#
# Add entries using the following format -
# "<application name>" : "<full path to icon>",
#------------------------------------------------------------------------------
ICON_LIST = {
"default" : "",
"example" : "/usr/share/data/images/audio.png",
}
#------------------------------------------------------------------------------
# Application Launch List: Ordered list of icons and applications for the
# application launcher.
#
# Add entries using the following format -
# ("<executable>", "<full path to icon>")
#------------------------------------------------------------------------------
# katso /usr/share/pixmaps siella on kuvakkeita mm.
#/usr/share/pixmaps/gnome-terminal.png
# ("komento", "kuvake"),
# ("komento2", "kuvake2"),
LAUNCH_LIST = [
("epiphany", "/home/TUNNUS/.idesktop/firefox_green.png"),
("gnome-terminal", "/home/TUNNUS/.idesktop/terminal_green.png"),
("leafpad ~/.readme", "/home/TUNNUS/.idesktop/doc_green.png"),
]
#------------------------------------------------------------------------------
# Background Alpha/Shade Level: 0 (Fully Translucent) -> 255 (Fully Opaque)
# BG_COLOR is used for tinting
#------------------------------------------------------------------------------
SHADE = 35
#------------------------------------------------------------------------------
# Misc. Options: 1 = Enabled/Yes, 0 = Disabled/No
#------------------------------------------------------------------------------
ABOVE = 1 # Panel is always above other apps #On theTop
APPICONS = 1 # Show application icons
AUTOHIDE = 0 # Autohide uses the CLOCK_DELAY timer above
SHADOWS = 0 # Show text shadows
SHOWLINES = 0 # Show object seperation lines
SHOWBORDER = 0 # Show a border around the panel
#------------------------------------------------------------------------------
# Desktop Names: Configure the names of your desktops
# If the option is [], PyPanel will attempt to use the desktop name specified
# by the XServer, if that fails it will use the desktop number as its name
# Ex. ["One", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight"]
#------------------------------------------------------------------------------
DESKTOP_NAMES = []
#------------------------------------------------------------------------------
# Panel Layout: -----------------------------------
# [ 1 ][ 2 ][ 3 ][ 4 ][ 5 ]
# -----------------------------------
#
# The panel layout is split into 5 sections numbered 1, 2, 3, 4 or 5 as shown
# in the diagram above. Each of the following objects can be enabled by
# assigning it a section number or disabled by assigning it 0:
#------------------------------------------------------------------------------
DESKTOP = 4 # Desktop name section
TASKS = 2 # Task names section
TRAY = 3 # System tray section
CLOCK = 5 # Clock section
LAUNCHER = 1 # Application launcher section
#------------------------------------------------------------------------------
# Button Event Function Definitions
#------------------------------------------------------------------------------
# Left click - button 1
# Middle click - button 2
# Right click - button 3
# Wheel up - button 4
# Wheel down - button 5
#
# changeDesktop(x)
# - Change Desktop: Increase or decrease the current desktop by 'x' amount
#
# toggleShade(task)
# - Shade or Unshade an application
#
# toggleHidden()
# - Minimize the panel to the top or bottom depending on its start location
#
# toggleMinimize(task, traise=1)
# - Minimize or Unminimize an application and optionally raise it
#
# taskRaise(task, focus=1)
# - Raise an application to the top of the window list and optionally focus it
#
# taskLower(task, focus=0)
# - Lower an app to the bottom of the window list and optionally focus it
#
# taskFocus(task)
# - Give focus to the selected application, if it has focus then minimize it
#
# showDesktop()
# - Toggle between hiding and unhiding ALL applications
#------------------------------------------------------------------------------
#----------------------------------
def desktopButtonEvent(pp, button):
#----------------------------------
""" Button event handler for the panel's desktop object """
if button == 1:
pp.changeDesktop(-1)
elif button == 2:
pp.changeDesktop(2)
elif button == 3:
pp.changeDesktop(1)
elif button == 4:
pp.changeDesktop(1)
elif button == 5:
pp.changeDesktop(-1)
#--------------------------------
def clockButtonEvent(pp, button):
#--------------------------------
""" Button event handler for the panel's clock object """
if button == 1:
os.system("xclock &")
elif button == 2:
pp.showDesktop()
elif button == 3:
# pp.toggleHidden()
pp.showDesktop()
elif button == 4:
pp.showDesktop()
elif button == 5:
pp.showDesktop()
#--------------------------------
def panelButtonEvent(pp, button):
#--------------------------------
""" Button event handler for the panel with no active tasks """
if button == 1:
pass
elif button == 2:
pass
elif button == 3:
pass
elif button == 4:
pass
elif button == 5:
pass
#-------------------------------------
def taskButtonEvent(pp, button, task):
#-------------------------------------
""" Button event handler for the panel's tasks """
if button == 1:
pp.taskFocus(task)
elif button == 2:
# Destroy the application
task.obj.destroy()
elif button == 3:
# Ex. - XMMS doesn't shade, so we want to minimize it instead and
# still use button 3 to shade other applications
# task.tclass is the tasks class name (WM_CLASS)
if "xmms" in task.tclass:
pp.toggleMinimize(task)
else:
pp.toggleShade(task)
elif button == 4:
pp.taskRaise(task, focus=1)
elif button == 5:
pp.taskLower(task, focus=0)
Jaa ja nyt ei Clonk Rage toiminy toimii näppisMää pistän paremmaksi eli se Windows ei tainnut olla ainoa mikä oli vähän sekaisin.
Juu tota USB portit ei toiminu, ja sammuili koko ajan. Pistink; paremmaks? Mut ny ei mitaan
paitti etta nappis o enkuks enka osaa muuttaa takas suomen kieliseks.
Mitenkaha ma muuttasin tan takasi suomenkieliseks.
ny toimii näppisMää pistän paremmaksi eli se Windows ei tainnut olla ainoa mikä oli vähän sekaisin
Juu tota USB portit ei toiminu, ja sammuili koko ajan. Pistink; paremmaks? Mut ny ei mitaan
paitti etta nappis o enkuks enka osaa muuttaa takas suomen kieliseks.
Mitenkaha ma muuttasin tan takasi suomenkieliseks.
Mää pistän paremmaksi eli se Windows ei tainnut olla ainoa mikä oli vähän sekaisin
