Viestit

1

Laitealue / Re: Radeon 9500 ja Mesa GLX ongelma..

« : 08.08.06 - klo:14.45 »

Ei kukaan tietäis siis mitään?

2

Laitealue / Re: Radeon 9500 ja Mesa GLX ongelma..

« : 07.08.06 - klo:22.46 »

Tjaha vastatakki joutessa... No niin elikkä

(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work

Kattoppas tuota linkkiä.

Ahaa, eli löyty tämmöset tuolta..

root@bakufu-desktop:/lib/modules/2.6.15-26-386# grep fglrx modules.dep
/lib/modules/2.6.15-26-386/volatile/fglrx.ko: /lib/modules/2.6.15-26-386/kernel/drivers/char/agp/agpgart.ko

Pitäisköhän tuo fglrx.ko nyt poistaa? Vai agpgart.ko? Mielestäni fglrx ei tässä pitäisi poistaa mutta agpgart kuulostaa myös tärkeältä..

Edit:
Ajatusvirhe tekstissä, korjattu :p

3

Multimedia ja grafiikka / Vs: Näytä työpöytäsi

« : 07.08.06 - klo:17.54 »

Aika vakio.. Heitin härskisti KDEn tuoho Ubuntun päälle vaikkakin valikoiden sekalaisuudesta valitettiinkin

No eipä ole vielä niin haitannut kun ei tuota "start" valikkoa niin hirveesti tule käyteltyä..

http://www.saunalahti.fi/~bakufu/kuvia/kde_desk.png

4

Laitealue / Re: Radeon 9500 ja Mesa GLX ongelma..

« : 07.08.06 - klo:14.04 »

Tässä tuo /var/log/Xorg.0.log..

Koodia: [Valitse]

bakufu@bakufu-desktop:~$ cat /var/log/Xorg.0.log | grep fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
(II) fglrx(0): pEnt->device->identifier=0x81db958
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) fglrx(0): PCI bus 2 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9500 (R300 4144)" (Chipset = 0x4144)
(--) fglrx(0): (PciSubVendor = 0x148c, PciSubDevice = 0x2057)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original AT I
(--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
(--) fglrx(0): MMIO registers at 0xe9000000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI R300
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R300
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Connected Display1: CRT on primary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL  Model: d  Serial#: 730352
(II) fglrx(0): Year: 2003  Week: 9
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:  Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 31  vert.: 23
(II) fglrx(0): Gamma: 2.98
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard !(II) fglrx(0): redX: 0.645 redY: 0.322   greenX: 0.278 greenY: 0.602
(II) fglrx(0): blueX: 0.142 blueY: 0.060   whiteX: 0.283 whiteY: 0.297
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) fglrx(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) fglrx(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) fglrx(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #4: hsize: 640  vsize 480  refresh: 100  vid: 26673
(II) fglrx(0): #5: hsize: 800  vsize 600  refresh: 100  vid: 26693
(II) fglrx(0): #6: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): #7: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 25.2 MHz   Image Size:  306 x 230 mm
(II) fglrx(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_bord er: 0
(II) fglrx(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_bord er: 0
(II) fglrx(0): Serial No:  BZ  730352
(II) fglrx(0): Monitor name: PHILIPS 107E5
(II) fglrx(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 71 kHz, PixCl ock max 110 MHz
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 41 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
-------------------
(--) fglrx(0): Display dimensions: (310, 230) mm
(--) fglrx(0): DPI set to (104, 113)
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): cpuSpeedMHz: 0x0000072d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM Bus area:     0xd8701000 (size=0x078ff000)
(II) fglrx(0): UMM area:     0xd8701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8
(II) fglrx(0): detected X.org 7.0.0.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:2:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb7fc7000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.25.18
(II) fglrx(0):     Date: May 18 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x2000 at 0xb7fc7000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 7163


5

Laitealue / Re: Radeon 9500 ja Mesa GLX ongelma..

« : 07.08.06 - klo:14.03 »

Tässä tuo dmesg | grep fglrx

Koodia: [Valitse]

bakufu@bakufu-desktop:~$ dmesg | grep fglrx
[17179590.492000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179590.496000] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[17179590.496000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0
[17179611.876000] [fglrx:firegl_unlock] *ERROR* Process 4829 using kernel context 0

Ja tuon sinun linkin ohjeen mukaan koittanukkin asentaa ajureita mutta ei toimi senkään jälkeen.

jatkuu..

6

Laitealue / Radeon 9500 ja Mesa GLX ongelma..

« : 07.08.06 - klo:06.47 »

Moro!

Elikkä tässä ny on pitkin yötä koitettu saada ATIn ajureita toimimaan, ongelmaksi vain muodostuu se että olen täysin ulkona miksei ne toimi vaikka kaikenjären mukaan PITÄIS toimia

Elikkä, ajurit on asennettu (uusimmat) ja systeemit tehty xorg.conf mutta fglrxinfo vaan pukkaa tämmöistä naamalle:

Koodia: [Valitse]

display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)

Eli ei suostu tuota fglrx hässäkkää lataamaan, olen niin ubuntun foorumeiden, gentoon foorumeiden ja googlen avulla koittanu ettiä ratkasua (ja kokeillut n. 1000 kikkaa) mutta ei niin ei. Josko jollain nyt olisi joku järkevä ratkasu tähän ku ite en enään jaksa keksiä mitään.

Tässä vielä tuo xorg conffi ja lisä-infoa.

Koodia: [Valitse]

Section "Module"
        Load  "i2c"
        Load  "bitmap"
        Load  "ddc"
        Load  "dri"
        Load  "extmod"
        Load  "freetype"
        Load  "glx"
        Load  "int10"
        Load  "type1"
        Load  "vbe"
EndSection

.............

Section "Device"
        Identifier  "ATI Technologies, Inc. R300 AD [Radeon 9500 Pro]"
        Driver      "fglrx"
        BusID       "PCI:2:0:0"
EndSection

Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "fglrx"
        Option      "VideoOverlay" "on"
        Option      "OpenGLOverlay" "off"
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "ATI Technologies, Inc. R300 AD [Radeon 9500 Pro]"
        Monitor    "PHILIPS 107E"
        DefaultDepth     24
        SubSection "Display"
                Depth     1
                Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" " 720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth     4
                Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" " 720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth     8
                Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" " 720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth     15
                Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" " 720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth     16
                Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" " 720x400" "640x480" "640x350"
        EndSubSection
        SubSection "Display"
                Depth     24
                Modes    "1280x1024" "1152x864" "1024x768" "832x624" "800x600" " 720x400" "640x480" "640x350"
        EndSubSection
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "DRI"
        Mode         0666
EndSection

modinfo fglrx:tä

Koodia: [Valitse]

bakufu@bakufu-desktop:~$ modinfo fglrx
filename:       /lib/modules/2.6.15-26-386/volatile/fglrx.ko
vermagic:       2.6.15-26-386 preempt 486 gcc-4.0
depends:        agpgart
author:         Fire GL - ATI Research GmbH, Germany
description:    ATI Fire GL
license:        Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY
parm:           firegl:s

Kiitos vastauksista, katellaan mitä on tullut kuhan heräilen joskus.