Viestit

1

Laitealue / Vs: Anysee usb-digi

« : 13.06.10 - klo:20.39 »

jiiiihaaa nyt toimii. vaihoin johon löysi kanavat eit toiminut. vaihoin vanhempaa kaffeinee ja nyt toimii!


iso kiitos kaikille minua auttanelille!

2

Laitealue / Vs: Anysee usb-digi

« : 08.06.10 - klo:20.12 »

kokeiltu windowsin puolella ja toiminu hyvin. tosin siinä oli ohjelmassa ongelma, niin en sitä käytä.


olen huomannu että jos käänteelen johtoa niin laite sammuu välillä. voisko olla johdossa vikaa?

3

Laitealue / Vs: Anysee usb-digi

« : 06.06.10 - klo:19.18 »

nyt sain jotain aikaan laite tunnistuu mutta dmesg antaa jotain erroria kun yritin kaffeinella kanavia hakea :

[ 5599.181911] DVB: registering new adapter (Anysee DVB USB2.0)
[ 5599.184920] anysee: firmware version:0.2.1 hardware id:2
[ 5599.187294] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 5599.188782] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-1/input/input16
[ 5599.188996] dvb-usb: schedule remote query interval to 200 msecs.
[ 5599.189005] dvb-usb: Anysee DVB USB2.0 successfully initialized and connected.
[ 5610.623337] usb 1-1: USB disconnect, address 29
[ 5610.710333] dvb-usb: bulk message failed: -22 (64/1)
[ 5610.710344] zl10353: write to reg 62 failed (err = -22)!
[ 5610.710353] dvb-usb: bulk message failed: -22 (64/-30720)
[ 5610.710360] zl10353: write to reg 62 failed (err = -22)!
[ 5610.710367] dvb-usb: bulk message failed: -22 (64/-1)
[ 5610.710373] zl10353: write to reg 50 failed (err = -22)!
[ 5760.380055] INFO: task khubd:30 blocked for more than 120 seconds.
[ 5760.380065] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5760.380073] khubd         D 00000000ffffffff     0    30      2 0x00000000
[ 5760.380086]  ffff88007cf9bad0 0000000000000046 0000000000015bc0 0000000000015bc0
[ 5760.380099]  ffff88007cfa03c0 ffff88007cf9bfd8 0000000000015bc0 ffff88007cfa0000
[ 5760.380110]  0000000000015bc0 ffff88007cf9bfd8 0000000000015bc0 ffff88007cfa03c0
[ 5760.380122] Call Trace:
[ 5760.380169]  [<ffffffffa0eb87c5>] dvb_unregister_frontend+0xc5/0x110 [dvb_core]
[ 5760.380187]  [<ffffffff81085320>] ? autoremove_wake_function+0x0/0x40
[ 5760.380203]  [<ffffffffa0f37332>] dvb_usb_adapter_frontend_exit+0x22/0x40 [dvb_usb]
[ 5760.380215]  [<ffffffffa0f36523>] dvb_usb_exit+0x63/0x110 [dvb_usb]
[ 5760.380228]  [<ffffffffa0f36619>] dvb_usb_device_exit+0x49/0x60 [dvb_usb]
[ 5760.380240]  [<ffffffff813d9304>] usb_unbind_interface+0x124/0x170
[ 5760.380253]  [<ffffffff81368cbf>] __device_release_driver+0x6f/0xe0
[ 5760.380262]  [<ffffffff81368e2d>] device_release_driver+0x2d/0x40
[ 5760.380274]  [<ffffffff81367e4a>] bus_remove_device+0x9a/0xc0
[ 5760.380288]  [<ffffffff81365fa7>] device_del+0x127/0x1d0
[ 5760.380296]  [<ffffffff813d5ac8>] usb_disable_device+0xa8/0x130
[ 5760.380307]  [<ffffffff813cf862>] usb_disconnect+0xd2/0x170
[ 5760.380317]  [<ffffffff813cfedf>] hub_port_connect_change+0x8f/0x980
[ 5760.380327]  [<ffffffff813d11d2>] hub_events+0x3b2/0x5a0
[ 5760.380338]  [<ffffffff8153e798>] ? thread_return+0x48/0x420
[ 5760.380348]  [<ffffffff813d1415>] hub_thread+0x55/0x190
[ 5760.380357]  [<ffffffff81085320>] ? autoremove_wake_function+0x0/0x40
[ 5760.380366]  [<ffffffff813d13c0>] ? hub_thread+0x0/0x190
[ 5760.380374]  [<ffffffff81084fa6>] kthread+0x96/0xa0
[ 5760.380384]  [<ffffffff810141ea>] child_rip+0xa/0x20
[ 5760.380392]  [<ffffffff81084f10>] ? kthread+0x0/0xa0
[ 5760.380400]  [<ffffffff810141e0>] ? child_rip+0x0/0x20

4

Laitealue / Vs: Anysee usb-digi

« : 06.06.10 - klo:15.14 »

Koodia: [Valitse]

[ 2671.313045] usbcore: registered new interface driver usbhid
[ 2671.313053] usbhid: v2.6:USB HID core driver
[ 2758.330075] usb 1-2: new high speed USB device using ehci_hcd and address 9
[ 2758.480336] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2759.400080] usb 1-2: new high speed USB device using ehci_hcd and address 10
[ 2760.800655] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[ 2760.800668] usb 1-2: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
[ 2760.800678] usb 1-2: config 1 interface 0 altsetting 1 bulk endpoint 0x1 has invalid maxpacket 64
[ 2760.800686] usb 1-2: config 1 interface 0 altsetting 1 bulk endpoint 0x81 has invalid maxpacket 64
[ 2760.801285] usb 1-2: configuration #1 chosen from 1 choice
[ 2760.801482] dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
[ 2760.801573] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 2760.801844] DVB: registering new adapter (Anysee DVB USB2.0)
[ 2760.805278] anysee: firmware version:0.2.1 hardware id:2
[ 2760.913538] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 2760.946846] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-2/input/input10
[ 2760.946999] dvb-usb: schedule remote query interval to 200 msecs.
[ 2760.947008] dvb-usb: Anysee DVB USB2.0 successfully initialized and connected.
[ 2763.559323] usb 1-2: USB disconnect, address 10
[ 2763.641083] dvb-usb: Anysee DVB USB2.0 successfully deinitialized and disconnected.
[ 2763.920091] usb 1-2: new high speed USB device using ehci_hcd and address 11
[ 2764.070313] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 2764.610085] usb 2-2: new full speed USB device using ohci_hcd and address 6
[ 2764.825057] usb 2-2: not running at top speed; connect to a high speed hub
[ 2764.840337] usb 2-2: configuration #1 chosen from 1 choice
[ 2764.843249] dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
[ 2764.843341] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)
[ 2764.843411] dvb-usb: Anysee DVB USB2.0 error while loading driver (-19)

tällästä tulee dmesgillä ja olen kokeillu jokasessa usb portissa

tällästä antaa toi lspci -v -k
sudo lshw -c bus

Koodia: [Valitse]

00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <access denied>

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at 1d00 [size=256]

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at 3080 [size=64]
I/O ports at 3040 [size=64]
I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:01.3 Co-processor: nVidia Corporation MCP65 SMU (rev a1)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 255
Memory at b0080000 (32-bit, non-prefetchable) [size=512K]

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 10)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18
Memory at b0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3) (prog-if 20)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
Memory at b0007000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:06.0 Ethernet controller: nVidia Corporation MCP65 Ethernet (rev a3)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at b0008000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 30e0 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth

00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01)
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
Memory behind bridge: b0100000-b01fffff
Capabilities: <access denied>

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
I/O ports at 30c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
Kernel modules: pata_amd

00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
I/O ports at 30f8 [size=8]
I/O ports at 30ec [size=4]
I/O ports at 30f0 [size=8]
I/O ports at 30e8 [size=4]
I/O ports at 30d0 [size=16]
Memory at b0004000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: b0200000-b02fffff
Prefetchable memory behind bridge: 00000000b6000000-00000000b60fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: b1000000-b3ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: b4000000-b5ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
Kernel modules: amd64_edac_mod

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp

03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
Subsystem: Hewlett-Packard Company Device 1367
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at b0200000 (64-bit, non-prefetchable) [size=16K]
Memory at b6000000 (64-bit, prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: wl
Kernel modules: wl, ssb

05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at b1000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at b2000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at 4000 [size=128]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nvidiafb, nouveau

07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at b0100000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394

07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, medium devsel, latency 64, IRQ 7
Memory at b0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: medium devsel, IRQ 10
[virtual] Memory at b0100c00 (32-bit, non-prefetchable) [disabled] [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc

07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
Subsystem: Hewlett-Packard Company Device 30cf
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at b0101000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
!!! Unknown header type 7f

kuoppis@kuoppis-hp:~$ sudo lshw -c bus

<nm: lisäsin kooditagit, etteivät erikoismerkit sekoita viestiä>

5

Laitealue / Vs: Anysee usb-digi

« : 04.06.10 - klo:19.39 »

tällästä antaa koneeni on siis hp kannettava dv6000 sarjalai

00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP65 SMU (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)
00:06.0 Ethernet controller: nVidia Corporation MCP65 Ethernet (rev a3)
00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)
00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1)
00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1)
07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)

6

Laitealue / Vs: Anysee usb-digi

« : 04.06.10 - klo:15.11 »

miten en saa toimii tota paskaaa anyseetä???

käytän lucidia ja mitkää ohjeet ei toimi.

valittaa nyt  että ei voi toimii usb 1.1 vaikka kaikki tän koneet on usb2.0?

anysee on e30 dvb-t monta vuotta vanha

7

Laitealue / Vs: Ubuntu 10.4 ja iphone

« : 12.05.10 - klo:22.27 »

Osaako kukaan auttaa? Vai onko noin mahotonta?

Joskus toimi moitteetta 9.10 kanssa mutta en muista millä sivulla ne oli ja ifusee en löydä enää synapticista

8

Laitealue / Vs: Ubuntu 10.4 ja iphone

« : 11.05.10 - klo:15.43 »

http://www.zdnet.com/blog/hardware/ubuntu-1004-now-with-iphoneipod-touch-support/7502

lisää googlettamalla: ubuntu 10.4 iphone

9

Laitealue / Vs: Ubuntu 10.4 ja iphone

« : 11.05.10 - klo:15.27 »

oon kokeillu noita mut ei toimi ja sain viimeks ubuntun ihan sekasin ku yritin saada toimii

10.4 pitäs toimii ihan out-of-the-box?

10

Laitealue / Vs: Ubuntu 10.4 ja iphone

« : 11.05.10 - klo:14.52 »

eikö kukaan osaa auttaa?

11

Laitealue / Ubuntu 10.4 ja iphone

« : 10.05.10 - klo:08.44 »

latasin uuden ubuntun (64-bit) ja tein puhtaan asennukksen. netin sivustojen mukaan iphonen pitäisi toimia suoraan ubuntun kanssa. ongelmana on että en pysty siirtämään musiikkia rytmilaatikosta iphoneen, sanoo tällästä erroria: "Error while getting peer-to-peer dbus connection: The name :1.62 was not provided by any .service files"

kuitenkin pystyin siirtämään kaiken musiikin iphonesta koneelle

auttakaa!

12

Laitealue / Wlanin nopeus

« : 01.04.10 - klo:09.33 »

Ongelma on semmonen että meillä on 8megan netti mutta siitä vain 800kiloa tulee wlanin kautta. missä vika?
olen yrittänyt muuttaa kanavia ja asetuskset on g nopeudelle.
Laite on telewellin ea510 version 3
ja läppärissä on broadcomin 4322 (?)

saiskos tätä nettiä nopeemmaksi???

13

Laitealue / Vs: Anysee usb-digi

« : 17.03.10 - klo:16.20 »

Me-tv ei löydä kanavia ja vlc en osaa käyttää :/

14

Laitealue / Vs: Anysee usb-digi

« : 17.03.10 - klo:15.03 »

ei onnistu vieläkään.

latasin tuon vanhankin kaffeinen nii siinä sanoo että kanavien viritys ei onnistu.
vaikka löysi kanavat

15

Laitealue / Vs: Anysee usb-digi

« : 16.03.10 - klo:20.07 »

eka tulee: Cannot find demultiplexer plugin for the given media data

ja sit tulee pelkästää errori

16

Laitealue / Vs: Anysee usb-digi

« : 15.03.10 - klo:17.14 »

kiitoksia paljon nyt toimii!

haki kanavat ku laitoin paikkakunnan sielt asetuksista

halus vielä demultiplexerin ja asensin sen synapticista!


voi***** iloitsin liian aikaisin rupes taas valittamaan demultiplexeristä että sitä mukamas ei löydy?!!?

kanavat näky sen 5min ja sit tää

17

Laitealue / Vs: Anysee usb-digi

« : 15.03.10 - klo:15.50 »

ei toimi vieläkään nyt dmesg sanoo:
[  233.300065] usb 1-6: new high speed USB device using ehci_hcd and address 5
[  233.450307] hub 1-0:1.0: unable to enumerate USB device on port 6
[  234.412565] usb 1-6: new high speed USB device using ehci_hcd and address 6
[  234.562836] hub 1-0:1.0: unable to enumerate USB device on port 6
[  234.842570] usb 1-6: new high speed USB device using ehci_hcd and address 7
[  235.000774] hub 1-0:1.0: unable to enumerate USB device on port 6
[  235.540080] usb 2-6: new full speed USB device using ohci_hcd and address 4
[  235.860437] usb 2-6: not running at top speed; connect to a high speed hub
[  235.888040] usb 2-6: configuration #1 chosen from 1 choice
[  236.030778] dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
[  236.030904] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)
[  236.030976] dvb-usb: Anysee DVB USB2.0 error while loading driver (-19)
[  236.031025] usbcore: registered new interface driver dvb_usb_anysee
[  432.223546] usb 2-6: USB disconnect, address 4
[  436.445225] usb 1-2: new high speed USB device using ehci_hcd and address 8
[  436.772822] hub 1-0:1.0: unable to enumerate USB device on port 2
[  437.212583] hub 1-0:1.0: unable to enumerate USB device on port 2
[  437.652588] usb 1-2: new high speed USB device using ehci_hcd and address 10
[  437.852895] hub 1-0:1.0: unable to enumerate USB device on port 2
[  438.392579] usb 2-2: new full speed USB device using ohci_hcd and address 5
[  439.051826] usb 2-2: not running at top speed; connect to a high speed hub
[  439.067055] usb 2-2: configuration #1 chosen from 1 choice
[  439.069970] dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
[  439.070056] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)
[  439.070121] dvb-usb: Anysee DVB USB2.0 error while loading driver (-19)
[  446.234694] usb 2-2: USB disconnect, address 5
[  450.070051] usb 1-6: new high speed USB device using ehci_hcd and address 11
[  450.220306] hub 1-0:1.0: unable to enumerate USB device on port 6
[  450.500057] usb 1-6: new high speed USB device using ehci_hcd and address 12
[  450.650048] hub 1-0:1.0: unable to enumerate USB device on port 6
[  450.932555] hub 1-0:1.0: unable to enumerate USB device on port 6
[  451.370050] usb 1-6: new high speed USB device using ehci_hcd and address 14
[  451.520326] hub 1-0:1.0: unable to enumerate USB device on port 6
[  452.062562] usb 2-6: new full speed USB device using ohci_hcd and address 6
[  452.766717] usb 2-6: not running at top speed; connect to a high speed hub
[  452.781917] usb 2-6: configuration #1 chosen from 1 choice
[  452.784834] dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
[  452.784910] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)
[  452.784971] dvb-usb: Anysee DVB USB2.0 error while loading driver (-19)
[  460.363230] usb 2-6: USB disconnect, address 6
[  463.442555] usb 1-1: new high speed USB device using ehci_hcd and address 15
[  464.400057] usb 1-1: device not accepting address 15, error -71
[  464.520042] usb 1-1: new high speed USB device using ehci_hcd and address 16
[  465.913855] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
[  465.913867] usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
[  465.913879] usb 1-1: config 1 interface 0 altsetting 1 bulk endpoint 0x1 has invalid maxpacket 64
[  465.913887] usb 1-1: config 1 interface 0 altsetting 1 bulk endpoint 0x81 has invalid maxpacket 64
[  465.914548] usb 1-1: configuration #1 chosen from 1 choice
[  465.915770] dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
[  465.915851] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  465.916120] DVB: registering new adapter (Anysee DVB USB2.0)
[  465.931722] anysee: firmware version:0.2.1 hardware id:2
[  465.991669] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[  466.027218] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-1/input/input9
[  466.027337] dvb-usb: schedule remote query interval to 200 msecs.
[  466.027347] dvb-usb: Anysee DVB USB2.0 successfully initialized and connected

 E:oho

kaffeine tunnistaa laitteen zarlink zl10353 dvb-t mutta ei löydä kanavia?

18

Laitealue / Vs: Anysee usb-digi

« : 14.03.10 - klo:18.48 »

ööö.. oon  aika uus linuxin käyttäjä.

mistä asennan ne uusimmat? synapticistä?

jos mitään auttaa ni käytän 64-bittistä ubuntua

edit: kokeilin tuolla 16 sivulla näkyvää ohjetta:
eka vaihe kaikki ok ja asennettu
tokas vaihees sanoo näin:
kuoppis@kuoppis-hp:~$ hg clone http://linuxtv.org/hg/v4l-dvb/
destination directory: v4l-dvb
abort: destination 'v4l-dvb' is not empty

seuraava virhe tulee make kohdassa:
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:21:17: error: dma.h: No such file or directory
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:22:21: error: csr1212.h: No such file or directory
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:23:23: error: highlevel.h: No such file or directory
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:24:19: error: hosts.h: No such file or directory
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:25:22: error: ieee1394.h: No such file or directory
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:26:17: error: iso.h: No such file or directory
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:27:21: error: nodemgr.h: No such file or directory
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:40: warning: 'struct hpsb_iso' declared inside parameter list
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:40: warning: its scope is only this definition or declaration, which is probably not what you want
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'rawiso_activity_cb':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:56: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:57: error: implicit declaration of function 'hpsb_iso_n_ready'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:64: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:65: error: implicit declaration of function 'dma_region_i'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:65: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:65: error: expected expression before 'unsigned'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:66: warning: assignment makes pointer from integer without a cast
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:67: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:71: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:85: error: implicit declaration of function 'hpsb_iso_recv_release_packets'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'node_of':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:90: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:90: warning: type defaults to 'int' in declaration of '__mptr'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:90: warning: initialization from incompatible pointer type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:90: error: invalid use of undefined type 'struct unit_directory'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'node_lock':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:95: error: 'quadlet_t' undeclared (first use in this function)
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:95: error: (Each undeclared identifier is reported only once
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:95: error: for each function it appears in.)
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:95: error: 'd' undeclared (first use in this function)
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:96: warning: ISO C90 forbids mixed declarations and code
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:98: error: implicit declaration of function 'hpsb_node_lock'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:99: error: 'EXTCODE_COMPARE_SWAP' undeclared (first use in this function)
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'node_read':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:107: error: implicit declaration of function 'hpsb_node_read'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'node_write':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:112: error: implicit declaration of function 'hpsb_node_write'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'start_iso':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:123: error: implicit declaration of function 'hpsb_iso_recv_init'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:123: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:125: error: 'HPSB_ISO_DMA_DEFAULT' undeclared (first use in this function)
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:127: warning: assignment makes pointer from integer without a cast
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:134: error: implicit declaration of function 'hpsb_iso_recv_start'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:137: error: implicit declaration of function 'hpsb_iso_shutdown'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'stop_iso':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:148: error: implicit declaration of function 'hpsb_iso_stop'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: At top level:
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:163: warning: 'struct hpsb_host' declared inside parameter list
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'fcp_request':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:176: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:177: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'node_probe':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:191: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:191: warning: type defaults to 'int' in declaration of '__mptr'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:191: warning: initialization from incompatible pointer type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:191: error: invalid use of undefined type 'struct unit_directory'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:196: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:197: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:198: error: implicit declaration of function 'CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:198: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:198: warning: assignment makes pointer from integer without a cast
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: At top level:
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:257: warning: 'struct unit_directory' declared inside parameter list
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'node_update':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:259: error: dereferencing pointer to incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: At top level:
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:267: error: variable 'fdtv_driver' has initializer but incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:268: error: unknown field 'name' specified in initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:268: warning: excess elements in struct initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:268: warning: (near initialization for 'fdtv_driver')
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:269: error: unknown field 'id_table' specified in initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:269: warning: excess elements in struct initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:269: warning: (near initialization for 'fdtv_driver')
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:270: error: unknown field 'update' specified in initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:270: warning: excess elements in struct initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:270: warning: (near initialization for 'fdtv_driver')
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:271: error: unknown field 'driver' specified in initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:271: error: extra brace group at end of initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:271: error: (near initialization for 'fdtv_driver')
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:274: warning: excess elements in struct initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:274: warning: (near initialization for 'fdtv_driver')
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:277: error: variable 'fdtv_highlevel' has initializer but incomplete type
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:278: error: unknown field 'name' specified in initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:278: warning: excess elements in struct initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:278: warning: (near initialization for 'fdtv_highlevel')
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:279: error: unknown field 'fcp_request' specified in initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:279: warning: excess elements in struct initializer
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:279: warning: (near initialization for 'fdtv_highlevel')
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'fdtv_1394_init':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:286: error: implicit declaration of function 'hpsb_register_highlevel'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:287: error: implicit declaration of function 'hpsb_register_protocol'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:290: error: implicit declaration of function 'hpsb_unregister_highlevel'
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c: In function 'fdtv_1394_exit':
/home/kuoppis/v4l-dvb/v4l/firedtv-1394.c:297: error: implicit declaration of function 'hpsb_unregister_protocol'
make[3]: *** [/home/kuoppis/v4l-dvb/v4l/firedtv-1394.o] Error 1
make[2]: *** [_module_/home/kuoppis/v4l-dvb/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.31-20-generic'
make[1]: *** [default] Virhe 2
make[1]: Poistutaan hakemistosta "/home/kuoppis/v4l-dvb/v4l"
make: *** [all] Virhe 2

tommosta jos yhtään auttaa

19

Laitealue / Vs: Anysee usb-digi

« : 14.03.10 - klo:18.35 »

on kaukosäädin mitä en kyllä edes käytä.


anysee on kyllä jo muutaman vuoden vanha.

auttaaks tohon enää mikään?

20

Laitealue / Vs: Anysee usb-digi

« : 14.03.10 - klo:12.50 »

en saa toimimaan tota millään ohjeella vaikka oon yrittäny jo monta kertaa
ubuntu on 9.10
kone on hp ja laite on anysee e30 dvb-t

dmesg komento sanoo:
 3321.500087] dvb-usb: error while querying for an remote control event.
[ 3321.700058] dvb-usb: bulk message failed: -22 (64/-1)
[ 3321.700068] dvb-usb: error while querying for an remote control event.
[ 3321.902556] dvb-usb: bulk message failed: -22 (64/-1)
[ 3321.902566] dvb-usb: error while querying for an remote control event.
[ 3322.100053] dvb-usb: bulk message failed: -22 (64/-1)
[ 3322.100063] dvb-usb: error while querying for an remote control event.
[ 3322.302552] dvb-usb: bulk message failed: -22 (64/-1)
[ 3322.302562] dvb-usb: error while querying for an remote control event.
[ 3322.500056] dvb-usb: bulk message failed: -22 (64/-1)
[ 3322.500066] dvb-usb: error while querying for an remote control event.
[ 3364.352552] dvb-usb: bulk message failed: -22 (64/-1)
kuoppis@kuoppis-hp:~$


monta sataa riviä