Mikä kone sinulla on Jakepi? Jos Eee, niin eee-control paketin mukana tulee myös tuo fan-control. Mutta joo, kyllä fancontrolin kai saa jostain erikseenkin, vaikka en sitä ainakaan itse vielä löytänyt.
Emolevy: Asrock 775TwinsHDTV
Prosessori: Intel Celeron D 326 2,53 GHZ
Keskusmuisti: 2x512 mb
Kovalevy: Samsung 200gb
Näytönohjain: Nvidia Geforce 6600 (256mb muistia)
Äänikortti: Realtek ac'97
Verkkokortti: Uli lan ethernet 100mbs
Käyttöjärjestelmät: Ubuntu 8.10 32 bit ja Windows xp professional servicepack 3 64 bit
Itse käytän nimenomaan fancontrol (lm-sensors -paketti). Nopea how to:
1 ) asenna lm-sensors
2 ) komenna "sudo sensors-detect" ja seuraile ohjeita
3 ) kun tuo on ajettu, niin lataa sensors-detectin ehdottamat mahdolliset moduulit
4 ) testaa komentoa "sensors", jonka pitäisi nyt sitten näyttää mahdollisia fanien nopeuksia, cpu:n lämpöjä, yms.. (jos emo tuettu)
5 ) komenna "sudo pwmconfig" ja seuraile ohjeita
6 ) käynnistä uudelleen fancontrol init-skripti ("sudo /etc/init.d/fancontrol restart")
7 ) jos määrittelit mielestäsi väärin pwmconfig:ssa fanien pyörimiseen vaikuttavia arvoja, voit ajaa uudestaa sen tai sitten muokata /etc/fancontrol -tiedostoa (oletuksena tuo)
8 ) muuttaessasi arvoja, muista käynnistää uudelleen fancontrol init-skripti
No mä tein tuohon 2 asti ja tuli tämmönen:
root@jarkko-desktop:~# sudo sensors-detect
# sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): YES
Probing for PCI bus adapters...
Use driver `i2c-ali15x3' for device 0000:00:1e.1: Acer Labs 1533/1543
Use driver `i2c-ali1535' for device 0000:00:1e.1: Acer Labs 1535
We will now try to load each adapter module in turn.
Module `i2c-ali15x3' already loaded.
Module `i2c-ali1535' already loaded.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no): YES
Module loaded successfully.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: NVIDIA i2c adapter (i2c-0)
Do you want to scan it? (YES/no/selectively): YES
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Client found at address 0x52
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Client found at address 0x53
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: NVIDIA i2c adapter (i2c-1)
Do you want to scan it? (YES/no/selectively): YES
Next adapter: NVIDIA i2c adapter (i2c-2)
Do you want to scan it? (YES/no/selectively): YES
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): YES
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): YES
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... Yes
Found `Winbond W83627EHF/EF/EHG/EG Super IO Sensors' Success!
(address 0x290, driver `w83627ehf')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no): YES
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD K10 thermal sensors... No
Intel Core family thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83627ehf' (should be inserted):
Detects correctly:
* ISA bus, address 0x290
Chip `Winbond W83627EHF/EF/EHG/EG Super IO Sensors' (confidence: 9)
I will now generate the commands needed to load the required modules.
Just press ENTER to continue:
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
w83627ehf
#----cut here----
Do you want to add these lines automatically? (yes/NO)yes
root@jarkko-desktop:~# sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
root@jarkko-desktop:~# sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
root@jarkko-desktop:~#
Mitä nyt pitää tehdä?
?
Mitä mun pitää esim ladata ja mistä?
Aihe: Tuulettimien hallinta Ubuntussa (Luettu 3564 kertaa)
