Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: ippanis - 03.02.08 - klo:22.32
-
Moikka taas pitkästä aikaa. Eipä oel tarvinnut enää hirveämmin kysellä, mutta ajattelin nyt kysyä täältä apua iahn varmuuden vuoksi, jottei tule tehtyä mitään hölmöä.
Eli ongelma on, että kun laitan VGA<->VGA piuhan kiinni telkkarista koneeseen niin jostain syystä nvidia settings ei osaa tunnistaa kuin 640x480 resoluution. Myös ongelma on se, että kun resoluutio on noin pieni nii en saa työpöytää mahtumaan tv:n ruutuun. Windowsin puolella pystyy skaalaamaan 1024x768 resoluutioksi.
Tiedän, että pitäisi kaiketi muuttaa hiukan tietoja /etc/X11/xorg.confista, joten tässä nykyinen:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Oct 16 22:13:07 PDT 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 64.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Sitten kyselisin vielä sellaista, että myös järjestelmä -> Ylläpito -> Näytöt ja kuva -kohdasta löytyy myös jotain samanlaista säädettävää, mutta mitään en saanut näkyviin sillä..?
-
PYstytkö kertomaan mikä näytönohain sinulla on?
r
-
Default depth sulla on näköjään 16, joten lisää sille 1024x768. Muutenkin noita 1,4,8,15 depth asetuksia et varmaankaan tarvi, vai?
Tässä malli miten lisäät sen 1024x768:
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768"
EndSubSection
-
PYstytkö kertomaan mikä näytönohain sinulla on?
Nvidia GeForce Go 7200
Lainaus
Default depth sulla on näköjään 16, joten lisää sille 1024x768. Muutenkin noita 1,4,8,15 depth asetuksia et varmaankaan tarvi, vai?
Tässä malli miten lisäät sen 1024x768:
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768"
EndSubSection
Muutettu, ei parannusta mihinkään suuntaan
-
Aah.. Ny hokasin eli sulla on ilmeisemmin kannettava ja käytät kannettavan vga-ulostuloa. Luulin aluksi, että on kyseessä pöytäkone.
Device-osioon voi kokeilla vaikka tällee.
Option "TwinView" "true"
Option "Metamodes" "DFP-0: 1280x800 +0+0, CRT-0: 1024x768 +1280+0"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "dfp,crt"
Option "UseDisplayDevice" "dfp,crt"
ja Display -osiota viel Virtual määrittely (yhteenlaskettu resoluutiot):
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768"
Virtual 2304 800
EndSubSection
Tuo lisää Nvidia twinview määrittelyn ja lisää crt:n oikealle puolelle 1024x768. Esimerkiksi voi myös kloonata saman näytön jolloin TwinviewOrientation muutetaan "clone"ksi , jne...
Tässä lisälinkkejä:
nvidian readme (http://us.download.nvidia.com/XFree86/Linux-x86/100.14.19/README/) (Appendix B antaa hyvi'ä vinkkejä)
multinäyttö ongelman ratkaisu (http://forum.ubuntu-fi.org/index.php?topic=14773.0)
Huom! Helpoiten noi säädöt pitäisi onnistua suoraan nvidia-settings -ohjelmalla. Ite on vaa tottunu käyttää tekstipohjaista editointia, jolloin saa juuri sitä mitä haluaa :).. Nämäkin ohjeet tulivat ilman testailua, joten toivon mukaan kaikki tarvittavat optiot ovat siinä :-\. Ota kopio olemassaolevasta ennen kokeilua.
Korjattu jälkikäteen Virtual arvoja...
-
ja Display -osiota viel Virtual määrittely (yhteenlaskettu resoluutiot):
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768"
Virtual 2034 1568
EndSubSection
Oletko aivan varma, että tuon pitää olla 2034 1568? Ensinnäkin eka on väärin (sen pitäisi olla 2204 jos nyt laskin oikein tarkistan... EDIT: ei kun 2304!!! ;D) ja toiseksi kuuluuko tuon viimeisenkin olla laskettu yhteen? Voisin nimittäin kuvitella, että ei, koska halutaan (no okei ippanis haluaa) superlaajakuva (siis semmoinen tosi laaja jos nyt älysitte mitä tarkoitan).
-
ja Display -osiota viel Virtual määrittely (yhteenlaskettu resoluutiot):
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768"
Virtual 2034 1568
EndSubSection
Oletko aivan varma, että tuon pitää olla 2034 1568? Ensinnäkin eka on väärin (sen pitäisi olla 2204 jos nyt laskin oikein tarkistan... EDIT: ei kun 2304!!! ;D) ja toiseksi kuuluuko tuon viimeisenkin olla laskettu yhteen? Voisin nimittäin kuvitella, että ei, koska halutaan (no okei ippanis haluaa) superlaajakuva (siis semmoinen tosi laaja jos nyt älysitte mitä tarkoitan).
Hups... nopeest ku kirjoittelee, nii menee väärin :) Kiitos huomiosta!
Joo, ekassa on ihan typo eli 2304 on oikea ja sit tokaahan ei tarvi laskea yhteen, vaa ottaa isompi luku eli 800. Kiitokset korjauksesta.
-
Eipä mitään. Huomautin kun huomasin. Siis 2304 800 (ja tämäkin ettei vahingossa mene sekaisin...) ::)
-
Toimii, kiitoksia kaikille avusta!
Tässä vielä lopullinen /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Mon Oct 16 22:13:07 PDT 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 64.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
Option "TwinView" "1"
Option "Metamodes" "DFP-0: 1280x800 +0+0, CRT-0: NULL"
Option "TwinViewOrientation" "clones"
Option "ConnectedMonitor" "dfp,crt"
Option "UseDisplayDevice" "dfp,crt"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768"
Virtual 2304 800
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
-
Ajattelin kaivaa tämän naftaliinista kun on sama ongelma edessä.
Eli en ole vähään aikaan käyttänyt nyt TV-out kuvaa ja näköjään päivityksien yhteydessä on myös xorg.conf muuttunut, oikeastaan kokonaan. Ongelma on siis sama kuin ensimmäisessä postissa eli telkkariin ei saa kuin 640x480 resoluutio valikoitten kautta. Telkkari on Samsungin LE40M86 jos tarvitsee tietää. Mutta joo, jos saisin vaan tuon 1024x768 valikkoon niin muuta en taida tarvita. Ellei saa samaa resoluutiota tai parempaa (mutta se on mahdotonta kun tämä on 16:10 ja telkku 16:9, eikö niin?)
-------------------------------------------
Tältä näyttää nykyinen xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@vernadsky) Thu Jun 5 09:26:53 UTC 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce Go 7200"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinViewOrientation" "clone"
Option "SecondMonitorHorizSync" "30 - 96.0"
Option "SecondMonitorVertRefresh" "50 - 120"
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: 640x480 +0+0, DFP: 1280x800 +0+0; CRT: NULL, DFP: 1280x800 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
PS Niinjoo ja ekan kerran käynnistyksessä lävähti se ruma NVIDIA logo. se pois.
Kiitos jo etukäteen.
-
Pumppaan ketjua ylös, yritin kaikkeni esim näillä (http://en.wikibooks.org/wiki/NVidia/Twin_View) ohjeilla, mutta ei tästä tule taas yhtään mitään.
-
Mikset käytä tuota aiemmin postaamaasi xorg.conffia, jos homma kerran toimi sillä, vai jäikö mulla nyt jotaki ymmärtämättä ????
Logon saa pois, kun lisää Option "NoLogo" "True" xorg.conffin screen osioon.
-
Mikset käytä tuota aiemmin postaamaasi xorg.conffia, jos homma kerran toimi sillä, vai jäikö mulla nyt jotaki ymmärtämättä ????
Logon saa pois, kun lisää Option "NoLogo" "True" xorg.conffin screen osioon.
Koska se ei toiminut kun kokeilin copypasteta. Tuloksena oli, että jouduin 'nollaamaan' x:n tiedot.
Mutta huoli pois, nyt taas toimii ja aika helpolla selvittiin. Kymmenennellä kerralla sain kohilleen =D
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@vernadsky) Thu Jun 5 09:26:53 UTC 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 30.0 - 75.0
VertRefresh 60.0
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce Go 7200"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "CRT: 1024x768 +128+16, DFP: 1280x800 +0+0"
EndSection