Kirjoittaja Aihe: Grub käynnistyksen lataaja (error 17)[ratkaistu]  (Luettu 2628 kertaa)

Muranziel

  • Käyttäjä
  • Viestejä: 11
    • Profiili
kun asensin Windowsin uudelleen, alkoi grub ilmoitamaan error 17.

sudo fdisk -lu
Koodia: [Valitse]
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x4243ee94

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1              63    20480543    10240240+   7  HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2        20480544   903169007   441344232    7  HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3       903174300   907174484     2000092+   5  Extended
/dev/sda4       907174485   976768064    34796790   83  Linux
/dev/sda5       903174363   907174484     2000061   82  Linux swap / Solaris

Disk /dev/sdb: 160.0 GB, 160041885696 bytes
16 heads, 63 sectors/track, 310101 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x3f47fdad

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          63   312577775   156288856+   7  HPFS/NTFS

Disk /dev/sdc: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x0e2f0e2e

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *          63   398267414   199133676    7  HPFS/NTFS

cat /boot/grub/device.map
Koodia: [Valitse]
(fd0) /dev/fd0
(hd0) /dev/sda
(hd1) /dev/sdb
(hd2) /dev/sdc

ja cat /boot/grub/menu.lst ilmoittaa
Koodia: [Valitse]
cat: /boot/grub/menu.lst: No such file or directory

kun taas kovalveyltä löytyvä menu.lst näyttää tältä
Koodia: [Valitse]
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=23ea5bb7-8abb-4606-ab4d-d3e07ba286bd ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=23ea5bb7-8abb-4606-ab4d-d3e07ba286bd

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid 23ea5bb7-8abb-4606-ab4d-d3e07ba286bd
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=23ea5bb7-8abb-4606-ab4d-d3e07ba286bd ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid 23ea5bb7-8abb-4606-ab4d-d3e07ba286bd
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=23ea5bb7-8abb-4606-ab4d-d3e07ba286bd ro  single
initrd /boot/initrd.img-2.6.27-7-generic

title Ubuntu 8.10, memtest86+
uuid 23ea5bb7-8abb-4606-ab4d-d3e07ba286bd
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1

Olen yrittänyt winkin ohjeiden, täältä foorumeilta löytyvien ohjeiden mukaan korjata, mutta aina tulee virhe ilmoituksia kuten
sudo grub-install /dev/sda
Koodia: [Valitse]
Could not find device for /boot: Not found or not a block device.
Kun noudatan wikin ohjeita setup kohtaan asti, saan tälläisen ilmoituksen
Koodia: [Valitse]
Checking if "/boot/grub/stage1" exists... yes
 Checking if "/boot/grub/stage2" exists... yes
 Checking if "/boot/grub/e2fs_stage1_5" exists... yes
 Running "embed /boot/grub/e2fs_stage1_5 (hd0,3)"... failed (this is not fatal)
 Running "embed /boot/grub/e2fs_stage1_5 (hd0,3)"... failed (this is not fatal)
 Running "install /boot/grub/stage1 (hd0,3) /boot/grub/stage2 p /boot/grub/menu.lst "... succeede
d
Done.
wikin find komento ilmoittaa juuri tuon (hd0,3) Grubin ensimmäisen vaiheen osioksi.
« Viimeksi muokattu: 06.12.08 - klo:10.52 kirjoittanut Muranziel »

veekoo

  • Käyttäjä
  • Viestejä: 443
    • Profiili
Vs: Grub käynnistyksen lataaja (error 17)
« Vastaus #1 : 29.11.08 - klo:18.21 »
Tuleeko tuo error 17 heti (ennen boottivalikkoa) vai siinä vaiheessa kun yrität bootata Linuxin?

Mitä tarkoitat, kun sanot ettei levyltä löydy tiedostoa /boot/grub/menu.lst mutta löydät sen sieltä kuitenkin? Miten olit bootannun koneen, että pääsit katsomaan konfiksia.

EDIT: vähän lisäystä:

Oletko kokeillut tämmöistä, tämä varastettu ketusta http://forum.ubuntu-fi.org/index.php?topic=23123.0 .

1. Boot with any live CD (I've done it with Ubuntu Live DVD)
2. Get a root shell -> Applications / System Tools / Root Terminal
3. Make a folder -> mkdir /mnt/ubuntu
4. Check the Ubuntu partition -> fdisk -l (oma ubuntuni on /dev/sdb1)
5. Mount the root partition of Ubuntu -> mount -t ext3 /dev/sdb1 /mnt/ubuntu
6. Chroot the mounted partition -> chroot /mnt/ubuntu
7. Restore Grub / the initial MBR -> grub-install /dev/sda
8. Exit the shell
9. Reboot
« Viimeksi muokattu: 29.11.08 - klo:18.28 kirjoittanut veekoo »

Muranziel

  • Käyttäjä
  • Viestejä: 11
    • Profiili
Vs: Grub käynnistyksen lataaja (error 17)
« Vastaus #2 : 03.12.08 - klo:08.14 »
Eli siis olen Live CD:ltä käynnistänyt ubuntun jonka päätteen kautta olen koettanut ilman tulosta korajta Grubia erilaisten ohjeiden mukaan mutta ei ole auttanut, mukaan lukien veekoon ohje.

Error 17 tulee ennen bootti valikkoa.
Koodia: [Valitse]
Loading Grub stage 1.5...
Error 17

veekoo: päätteen avulla komenolla cat /boot/grub/nemu.lst tulee teksti ettei kyseistä tiedostoa löytynyt (tjsp).

Mutta navigoidessani graafisessa ympäristössä kansioon boot -> Grub ja klikatessani menu.lst tiedostoa, tulee näkyviin ensimmäisessä viestissäni kopioimani teksti.

Ei kai tässä muu auta kuin asentaa linux sitten uudestaan ellei joku osaa neuvoa vielä enemmän.

P.S Pahoitteluni vastauksen kestämisessä. En ole ollut internetin äärellä hetkeen.

veekoo

  • Käyttäjä
  • Viestejä: 443
    • Profiili
Vs: Grub käynnistyksen lataaja (error 17)
« Vastaus #3 : 03.12.08 - klo:11.51 »
veekoo: päätteen avulla komenolla cat /boot/grub/nemu.lst tulee teksti ettei kyseistä tiedostoa löytynyt (tjsp).

Tämä kohta on vielä selvä: jos olet bootannut koneen live CD:llä, niin /boot -hakemistoa etsitään Live-CD:n tiedostojärjestelmästä, ei kovalevyltä. Viestissäni olevissa ohjeissa vaiheet 3-6 liittyvät juuri siihen, että käsitellään varmasti kovalevylle asennettua GRUB:in tiedostoja.

Jos GRUB ei korjaudu sen listan ohjeilla, niin sitten en oikein osaa auttaa. Ehkä jotkut GRUB-tiedostot ovat korruptoituneet, tai jotain...

Jakke77

  • Käyttäjä
  • Viestejä: 3933
  • Oulu (Oinaansuo)
    • Profiili
U_G_H

Aspire E5-575G V1.27 CPU: Intel i3-6100U (4) @ 2.300GHz GPU: Intel® HD Graphics 520 GPU: NVIDIA GeForce 940MX Samsung SSD 970 EVO Plus 500GB

Muranziel

  • Käyttäjä
  • Viestejä: 11
    • Profiili
Vs: Grub käynnistyksen lataaja (error 17)
« Vastaus #5 : 06.12.08 - klo:10.51 »
Ratkaisu löytyi.

Muistin yllättäen, kun olin ostanut uuden emolevun ja käynnistin koneen ensimmäistä kertaa, kysyttiin minulta haluanko pitää SATA levyt AHCI modessa vai siirrynkö Native IDE Modeen. Silloin valitsin tietämättömyyttäni Native IDE, jotta pystyin asentaa XP:n uudelleen. Tänään päätin sitten viimein asentaa Linuxin uudelleen kun error 17 ongelma ei tuntunut korjaantuvan millään. Kun asennus oli suoritettu ja kone käynnistyi jälleen, tuli error 17 taas. käynnistin vielä kerran ja samalla muutin sata levyjen moden Native IDE:stä AHCI:ksi biosissa.

Kiitos vastanneille avusta.