Kirjoittaja Aihe: Beryl ongelmia jälleen  (Luettu 1893 kertaa)

Linkku

  • Käyttäjä
  • Viestejä: 9
    • Profiili
Beryl ongelmia jälleen
« : 10.02.07 - klo:12.48 »
Asentelin Ubuntun uudelleen kun sain sen kikkailulla täysin jumiin. Nyt uudelleen asennuksen jälkeen en saa enää Berylia käynnistymään vaikka asensin sen samojen ohjeiden avulla kuin viimeksikin. Terminaaliin kun laittaa "beryl manager" niin tulee seuraavanlainen teksi näyttöön:

**************************************************************
* Beryl system compatiblity check                            *
**************************************************************

Detected xserver                                : AIGLX

Checking Display :0.0 ...

Checking for XComposite extension               : passed (v0.3)
Checking for XDamage extension                  : passed
Checking for RandR extension                    : passed
Checking for XSync extension                    : passed

Checking Screen 0 ...

Xlib:  extension "GLX" missing on display ":0.0".
Root visual is not a GL visual
Xlib:  extension "GLX" missing on display ":0.0".
beryl: Root visual is not a GL visual
beryl: Failed to manage screen: 0
beryl: No manageable screens found on display :0.0
marko@ubuntu:~$

Eli ilmeisesti jotain vielä puuttuu? Käytössä Ubuntu 6.10 ja Geforce 6800 GT.

Vinkkejä?



eliasj

  • Käyttäjä
  • Viestejä: 4075
    • Profiili
Vs: Beryl ongelmia jälleen
« Vastaus #1 : 10.02.07 - klo:13.00 »
Mitä sanoo komento
Koodia: [Valitse]
glxgears | grep direct ja miltä näyttää tiedostosi /etc/x11/xorg.conf.
alias vililikku

Linkku

  • Käyttäjä
  • Viestejä: 9
    • Profiili
Vs: Beryl ongelmia jälleen
« Vastaus #2 : 10.02.07 - klo:13.06 »
Mitä sanoo komento
Koodia: [Valitse]
glxgears | grep direct

marko@ubuntu:~$ glxgears | grep direc
Xlib:  extension "GLX" missing on display ":0.0".

Ja xorg.conf näyttää seuraavalta:

 /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/X11/fonts/misc"
   FontPath   "/usr/share/X11/fonts/cyrillic"
   FontPath   "/usr/share/X11/fonts/100dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/75dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/Type1"
   FontPath   "/usr/share/X11/fonts/100dpi"
   FontPath   "/usr/share/X11/fonts/75dpi"
   FontPath   "/usr/share/fonts/X11/misc"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "type1"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "rt2300"
   Option      "XkbLayout"   "fi"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ExplorerPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "NVIDIA Corporation NV40 [GeForce 6800 GT]"
   Driver      "nv"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "VP2030 SERIE"
   Option      "DPMS"
   HorizSync   30-75
   VertRefresh   50-85
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "NVIDIA Corporation NV40 [GeForce 6800 GT]"
   Monitor      "VP2030 SERIE"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus" "SendCoreEvents"
   InputDevice     "cursor" "SendCoreEvents"
   InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection

-Marko-

eliasj

  • Käyttäjä
  • Viestejä: 4075
    • Profiili
Vs: Beryl ongelmia jälleen
« Vastaus #3 : 10.02.07 - klo:13.08 »
Jatkossa käytä
Koodia: [Valitse]
codetageja.


Komenna
Koodia: [Valitse]
sudo gedit /etc/X11/xorg.conf poista rivit
Load   "dri"
 ja
Section "DRI"
   Mode   0666
EndSection

Muuta kohdasta
Driver      "nv"
nv:n tilalle nvidia.
alias vililikku

Linkku

  • Käyttäjä
  • Viestejä: 9
    • Profiili
Vs: Beryl ongelmia jälleen
« Vastaus #4 : 10.02.07 - klo:13.38 »
Kiitos vastauksesta.

Mutta Driver    "nv"  -> Driver   "nvidia" muutoksen jälkeen graafinen liittymä ei auennut olenkaan. Muutos takaisin "nv":ksi auttoi siihen. Eli onko nvidian ajureiden asennus jotenkin epäonnistunut.

-Marko-

eliasj

  • Käyttäjä
  • Viestejä: 4075
    • Profiili
Vs: Beryl ongelmia jälleen
« Vastaus #5 : 10.02.07 - klo:15.29 »
Asenna Nvidian ajurit.
Koodia: [Valitse]
sudo apt-get install nvidia-glx nvidia-kernel-common ja tee edellä mainittujen ohjeiden mukaan.
alias vililikku