Kirjoittaja Aihe: Näytön asetukset  (Luettu 3317 kertaa)

Sazoro

  • Käyttäjä
  • Viestejä: 409
    • Profiili
Näytön asetukset
« : 02.07.06 - klo:12.10 »
Asensin kubuntun (siis ubuntun lisäksi)ja nyt ei näytön asetukset toimi enkä saa niitä muutettua siitä valikosta. antaa liian pienen koon. Ubuntussa homma toimi automaattisesti mutta ei tässä. Kuinka pääsisin muuttamaan asetukset oikein?

eliasj

  • Käyttäjä
  • Viestejä: 4075
    • Profiili
Re: Näytön asetukset
« Vastaus #1 : 02.07.06 - klo:18.35 »
Koodia: [Valitse]
sudo dpkg-reconfigure xserver-xorg
alias vililikku

Sazoro

  • Käyttäjä
  • Viestejä: 409
    • Profiili
Re: Näytön asetukset
« Vastaus #2 : 02.07.06 - klo:20.03 »
Muuten ihan hyvä neuvo, kiitoksia vaan mutta kun eteen avautuu pelkkä enkunkielinen "juttu" enkä osaa tarpeeksi jotta ymmärtäisin mihin kaikkeen vastaa ok ja mihin en. Eikö ole jotain muuta tapaa tehdä tuota?

eliasj

  • Käyttäjä
  • Viestejä: 4075
    • Profiili
Re: Näytön asetukset
« Vastaus #3 : 02.07.06 - klo:21.41 »
Mitä sanoo komento
Koodia: [Valitse]
cat /etc/X11/xorg.conf
alias vililikku

Owdy

  • Käyttäjä
  • Viestejä: 1954
    • Profiili
Re: Näytön asetukset
« Vastaus #4 : 02.07.06 - klo:21.49 »
Resoluutiotako yrität muuttaa? Mihin resoon? Mikä näytönohjain? Ja näytä tosiaan toi xorg.conf tuloste.

Sazoro

  • Käyttäjä
  • Viestejä: 409
    • Profiili
Re: Näytön asetukset
« Vastaus #5 : 02.07.06 - klo:22.37 »
En tiedä mikä näytönohjain mutta gnomessa toimii ihan ok. Pitäisi saada 1028x1024 mutta sellaista ei köydy tuosta graafisesta työkalusta.
Tuo komento antaa tällaisen:
zoja@zoja-desktop:~$ cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/X11/fonts/misc"
        FontPath        "/usr/share/X11/fonts/cyrillic"
        FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/Type1"
        FontPath        "/usr/share/X11/fonts/100dpi"
        FontPath        "/usr/share/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "type1"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "fi"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ExplorerPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "ATI Technologies, Inc. Radeon RV100 QY [Radeon 7000/VE]"
        Driver          "ati"
        BusID           "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "99G"
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "ATI Technologies, Inc. Radeon RV100 QY [Radeon 7000/VE]"
        Monitor         "99G"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes             "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes            " "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes             "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes             "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes             "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes             "1024x768" "832x624" "800x600" "720x400" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "stylus" "SendCoreEvents"
        InputDevice     "cursor" "SendCoreEvents"
        InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
        Mode    0666
EndSection
zoja@zoja-desktop:~$

eliasj

  • Käyttäjä
  • Viestejä: 4075
    • Profiili
Re: Näytön asetukset
« Vastaus #6 : 02.07.06 - klo:22.53 »
Eli muuta SubSection "Display"
                 Depth           24
                 Modes             "1024x768" "832x624" "800x600" "720x400" "640x480"
         EndSubSection
kohdasta ensimmäiseksi se resoluutio jota haluat että käytetään.
alias vililikku

Sazoro

  • Käyttäjä
  • Viestejä: 409
    • Profiili
Re: Näytön asetukset
« Vastaus #7 : 03.07.06 - klo:09.32 »
Juu mutta millä käskyllä pääsen muuttamaan noita asetuksia?

Sarkas

  • Vieras
Re: Näytön asetukset
« Vastaus #8 : 03.07.06 - klo:09.57 »
Juu mutta millä käskyllä pääsen muuttamaan noita asetuksia?


Kirjoita komentoriviin: sudo gedit /etc/X11/xorg.conf (Avaa tekstinkäsittelyohjelman).

juyli

  • Vieras
Re: Näytön asetukset
« Vastaus #9 : 03.07.06 - klo:10.03 »
Juu mutta millä käskyllä pääsen muuttamaan noita asetuksia?

No, no. Vililikku kertoi tuo maagisen loitsun jo ensimmäisessä viestissään. Tosin
tuo editointi käy helpommin editorilla käpistelemällä /etc/X11/xorg.conf tiedostoa. Esim.
Koodia: [Valitse]
sudo vi /etc/X11/xorg.conf
Vi on perustekstieditori, joka löytyy kaikista Linux-jakeluista.

Periaatteessa kun koneellesi on asennettu kaksi Ubuntu-jakelua, voit verrata niiden /etc/X11/xorg.conf tiedostoja. On jopa mahdollista, että kopioit toimivan xorg.conffin jakeluun, jossa xorg.conf ei toimi.

Ubuntu ja Kubuntu ovat niin samanlaisia jakeluja, ettei niiden asentaminen erikseen ole hirveän fiksua. Ubuntuun voi asentaa tarvittavat KDE-kamat ja vastaavasti Kubuntuun Gnome-palikat.

Sazoro

  • Käyttäjä
  • Viestejä: 409
    • Profiili
Re: Näytön asetukset
« Vastaus #10 : 03.07.06 - klo:10.13 »
Suurkiitos. Nyt toimii.