Kirjoittaja Aihe: Näyttö pimeä / Nvidia / Ubuntu 9.10  (Luettu 2778 kertaa)

Ripa

  • Käyttäjä
  • Viestejä: 196
    • Profiili
Näyttö pimeä / Nvidia / Ubuntu 9.10
« : 01.12.09 - klo:18.08 »
(Netissä nyt satunnaisella koneella)

Päivitin koneeni vanhan Ubuntun version ?? Ubuntun versioon 9.04 OK.
Sitten hain Nvidian ajurit, jonka jälkeen näyttö pimeäksi.

Ei hätää uusi versio tulossa joten odottelin hetken ja asentelin 9.10:n OK .
Kun sitten asensin taas nuo Nvidian ajurit (en muista mikä versio. laistassa luki että suositeltu)  Sama juttu näyttä pimeänä asennuksen jälkeen.

Käynnistyksessä tekstitila ok. Ubuntun logo näkyy 20 sek ja senjälkeen näyttö virransäästötilaan ja pimeäksi.

Tuolla 9.04 edeltävällä versiolla (??) Nvidian ajurit toimi ihan ok.

Luulen että ongelma on että näyttö ei tunnistu oikeen ja resolutio asettu niin korkeaksi että näyttö ei tue sitä.
Joillain muilla distroilla on käynyt tuon näytön kanssa niin.

Tekstitilaan pääsen Ctrl + Alt + F1
Miten pääsen perus VGA- tilaan, tai säädän näytön reson kohdallaan.

nm

  • Käyttäjä
  • Viestejä: 16232
    • Profiili
Vs: Näyttö pimeä / Nvidia / Ubuntu 9.10
« Vastaus #1 : 01.12.09 - klo:19.24 »
Kirjaudu sisään tekstitilassa ja kopioi /var/log/Xorg.0.log talteen kotihakemistoosi:

Koodia: [Valitse]
cp /var/log/Xorg.0.log Xorg.nvidia.log
Siirrä sitten suljettua ajuria varten tehty xorg.conf pois tieltä ja käynnistä gdm uudelleen, jotta pääset työpöydälle:

Koodia: [Valitse]
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.nvidia
sudo /etc/init.d/gdm restart

Tutki sitten Xorg.nvidia.log -tiedostosta, mikä näytön tunnistuksessa tai resoluutioissa menee pieleen. Jos tarvitset apua, laita tiedosto viestin liitteeksi tänne foorumille. Kerro myös näytön tarkka malli ja näytä /etc/X11/xorg.conf.nvidia -tiedoston sisältö.

Ripa

  • Käyttäjä
  • Viestejä: 196
    • Profiili
Vs: Näyttö pimeä / Nvidia / Ubuntu 9.10
« Vastaus #2 : 03.12.09 - klo:20.55 »
Kiitos selkeistä ohjeista!!
Nyt taas koneessa kuva.

Näytön voisi tietenkin "päivittää" ajan tasalle, jolla ongelma ratkeaisi, mutta
minua kiinnostaa oppia miten voin säätää näytönohjaimen toimimaan vanhan näyttöni kanssa.

Voiko sen tehdä jollain graafisella työkalulla / asennusohjelmalla?
Vai muutanko tuohon tiedostoon /var/log/Xorg.0.log oikean reson.
Mihin muualle pitää muuttaa jotain. ja missä ko. tiedostot "asuu"


**********************************************************

Koneen näyttö on vanha (10V) putkinäyttö Forefront DH-1764UD
Reso max 1024 x 768 (1200 reso menee vaivioin)

Syy siihen että näyttö menee virransäästötilaan on tuo liian korkea resolutio.

Ps. Myöskin monet OpenSUSE:n versiot tunnistaa ko. näytön väärin (liiankorkea reso ja sama ongelma)

*********************************************************************************


Pari poimintaa tiedostosta Xorg.nvidia.log

(--) PCI:*(0:1:0:0) 10de:02e1:1043:8215 nVidia Corporation G73 [GeForce 7600 GS] rev 162, Mem @ 0xe4000000/16777216, 0xd0000000/268435456, 0xe5000000/16777216, BIOS @ 0x????????/131072


Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200

Kokotiedosto:
Koodia: [Valitse]
X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux mediapc 2.6.31-15-generic #50-Ubuntu SMP Tue Nov 10 14:54:29 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-15-generic root=UUID=176d17c9-0383-4cb7-bea0-ec8d6a1203a9 ro quiet splash
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec  1 17:55:34 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) |   |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:02e1:1043:8215 nVidia Corporation G73 [GeForce 7600 GS] rev 162, Mem @ 0xe4000000/16777216, 0xd0000000/268435456, 0xe5000000/16777216, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 17:50:12 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  185.18.36  Fri Aug 14 17:24:40 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7600 GS (G73) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.73.22.25.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7600 GS at PCI:1:0:0:
(--) NVIDIA(0):     FIL (CRT-0)
(--) NVIDIA(0): FIL (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(--) NVIDIA(0): DPI set to (126, 126); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device PWC snapshot button
(**) PWC snapshot button: always reports core events
(**) PWC snapshot button: Device: "/dev/input/event5"
(II) PWC snapshot button: Found keys
(II) PWC snapshot button: Configuring as keyboard
(II) XINPUT: Adding extended input device "PWC snapshot button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fi"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fi"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fi"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fi"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fi"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.

edit se tiedosto xorg.conf.nvidia
Koodia: [Valitse]
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection

Section "Module"
Load "glx"
EndSection

Section "Device"
Identifier "Default Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
« Viimeksi muokattu: 03.12.09 - klo:21.10 kirjoittanut Ripa »

roki

  • Käyttäjä
  • Viestejä: 192
  • Ubuntu Studio
    • Profiili
    • koti Sivu
Vs: Näyttö pimeä / Nvidia / Ubuntu 9.10
« Vastaus #3 : 03.12.09 - klo:22.59 »
Kiitos selkeistä ohjeista!!
Nyt taas koneessa kuva.

Näytön voisi tietenkin "päivittää" ajan tasalle, jolla ongelma ratkeaisi, mutta
minua kiinnostaa oppia miten voin säätää näytönohjaimen toimimaan vanhan näyttöni kanssa.

Voiko sen tehdä jollain graafisella työkalulla / asennusohjelmalla?
Vai muutanko tuohon tiedostoon /var/log/Xorg.0.log oikean reson.
Mihin muualle pitää muuttaa jotain. ja missä ko. tiedostot "asuu"


**********************************************************

Koneen näyttö on vanha (10V) putkinäyttö Forefront DH-1764UD
Reso max 1024 x 768 (1200 reso menee vaivioin)

Syy siihen että näyttö menee virransäästötilaan on tuo liian korkea resolutio.

Ps. Myöskin monet OpenSUSE:n versiot tunnistaa ko. näytön väärin (liiankorkea reso ja sama ongelma)


Eipä tuohon hommaan vieläkään taida olla yleispätevää ja hyvin toimivaa graafista työkalua, joten joudut/pääset editoimaan tiedostoa /etc/X11/xorg.conf

Modernin ja upean mutta huonosti toimivan automaagitunnistuksen jäljiltä tuo tiedosto on varsin autio, mutta näytön rajoittuneisuuden ilmoittamisessa on Section "Monitor", jossa pitää kertoa monitorin sietämät tahdistusrajat.

Koodia: [Valitse]
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30-58
VertRefresh 50-72
EndSection

Noilla arvoilla pitäisi irrota 1024x768@70, johon näyttimesi melko varmasti kykenee. Arvot on arvottu suoraan hatusta yli 10 vuoden kokemuksella X:n säätämisestä. =)
« Viimeksi muokattu: 03.12.09 - klo:23.06 kirjoittanut roki »

Linuxin käyttäjä kernelin versiosta 1.2.13