Kirjoittaja Aihe: Langaton netti + usb-dongle = not working... (Netwjork W541U)  (Luettu 2330 kertaa)

prinssieetu

  • Käyttäjä
  • Viestejä: 9
    • Profiili
Morjensta.

Mulla on ollu nyt kovinkin kova haku päällä tän asian suhteen mutten valitettavasti ole löytänyt vastausta mistään. Vinkkejä/tippejä on löytynyt, muttei mitään oleellista mitä asialle tehdä. Koneesta siis löytyy Ubuntu 9.04 ja siihen on läiskitty Netwjorkin W541U kiinni. Langaton netti pörrää D-linkin avulla ja on täysin toimiva. Ongelmaksi on nyt muodostunut se, että en vain tunnu saavan yhteyttä mitenkään. Oon konffaillut asetukset, mutta ei auta. USB-donglessa siniset valot palaa ja networkkien kohdalla ylhäällä lukee näin: "Wireless networks : device not managed".  lsusb löytää kyllä.

dmesg sanoo näin (ja pitkän matkaa, tässä vain osa komennon tuottamasta rivivirrasta):

Lainaus
[ 1857.624087] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3000 with error -110.
[ 1869.456607] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0800 with error -62.
[ 1871.909756] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x01 failed for offset 0x0000 with error -62.
[ 1871.909767] phy7 -> rt73usb_load_firmware: Error - Failed to write Firmware to device.
[ 1960.888546] Inbound IN=eth0 OUT= MAC=00:22:15:d4:da:a5:00:21:91:6c:33:3a:08:00 SRC=89.166.50.52 DST=192.168.0.164 LEN=164 TOS=0x00 PREC=0x00 TTL=58 ID=47954 DF PROTO=TCP SPT=22 DPT=123 WINDOW=95 RES=0x00 ACK PSH URGP=0
[ 2036.695889] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3000 with error -62.
[ 2036.714887] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0800 with error -62.
[ 2036.729890] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x01 failed for offset 0x0000 with error -62.
[ 2036.729901] phy7 -> rt73usb_load_firmware: Error - Failed to write Firmware to device.
[ 2096.108324] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3000 with error -110.
[ 2187.696132] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0800 with error -62.
[ 2187.927029] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x01 failed for offset 0x0000 with error -62.
[ 2187.927039] phy7 -> rt73usb_load_firmware: Error - Failed to write Firmware to device.
[ 2383.108425] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3000 with error -110.
[ 2386.940034] usb 4-6: new low speed USB device using ohci_hcd and address 20
[ 2387.128042] usb 4-6: device descriptor read/64, error -62
[ 2387.416035] usb 4-6: device descriptor read/64, error -62
[ 2387.680044] usb 4-6: new low speed USB device using ohci_hcd and address 21
[ 2387.864041] usb 4-6: device descriptor read/64, error -62
[ 2388.148033] usb 4-6: device descriptor read/64, error -62
[ 2388.428031] usb 4-6: new low speed USB device using ohci_hcd and address 22
[ 2388.836031] usb 4-6: device not accepting address 22, error -62
[ 2389.012055] usb 4-6: new low speed USB device using ohci_hcd and address 23
[ 2389.420030] usb 4-6: device not accepting address 23, error -62
[ 2389.420059] hub 4-0:1.0: unable to enumerate USB device on port 6

Kertokaas nyt taitavammat, että mitä suht tuoreen Ubuntukäyttäjän tulisi tehdä, että saisin netin toimimaan ilman 25 metrin piuhaa?

Eetu