40.495983] PnP: PnPACPI method_name__crs failure for PnP0c01

[adjektiivi]

Elikkä tälläistä heittää aina kun kone aukeaa 40.495983] PnP: PnPACPI method_name__crs failure for PnP0c01
onko vaarallista? kuinka voisin vakuttaa tähän ettei tätä tulisi?
Ennen tuota tekstiä lukee GRUB loading 5 tai sinne päin? tästäkin jos joku osaisi kertoa. niin ei vaivaisi.
lyösin juttua tuosta grubista että se on jonkun lainen alkulataaja, mutta eikai siitä haittaa ole kun se teksti tulee?

[gdm]

Valikko->Sovellukset->Apuohjelmat->Pääte

Koodia: [Valitse]

cat /var/log/syslog | grep -i 'pnpacpi'

Koodia: [Valitse]

dmesg | grep -i 'pnpacpi'
Noiden komentojen tulosteet tänne.

Häiritseekö tuo millään lailla koneen suoritusta?
Toimiiko kaikki?

[adjektiivi]

en tiedä mihin tuo 40.495983] PnP: PnPACPI method_name__crs failure for PnP0c01 vaikuttaa, mutta työpöydän nappulat ja resot saattavat muuttua ihan kummallisiksi kun käynnistän koneen uudelleen tai lukitsen näytön.

[adjektiivi]

Valikko->Sovellukset->Apuohjelmat->Pääte

Koodia: [Valitse]

cat /var/log/syslog | grep -i 'pnpacpi'

Koodia: [Valitse]

dmesg | grep -i 'pnpacpi'
Noiden komentojen tulosteet tänne.

Häiritseekö tuo millään lailla koneen suoritusta?
Toimiiko kaikki?

a245@2345:~$ cat /var/log/syslog | grep -i 'pnpacpi'
Aug  8 12:09:26 2345 kernel: [   30.388440] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug  8 12:24:14 2345 kernel: [   30.558224] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug  8 15:24:00 2345 kernel: [   55.677298] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug  8 16:56:36 2345 kernel: [   39.496247] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug  8 19:59:19 2345 kernel: [   40.902411] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug  8 20:53:20 2345 kernel: [   56.689490] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug  8 20:55:11 2345 kernel: [   39.470091] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
a245@2345:~$


a245@2345:~$ dmesg | grep -i 'pnpacpi'
[   39.470091] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
a245@2345:~$

[adjektiivi]

osaisiko joku auttaa? googlettamalla en löytänyt oikeen vastausta, voi johtua huonosta lontoon kielen taidostakin 
tuntuu että se jumittaa koneen käynnistystä pikkuisen, ainakin verrattuna mitä toisella koneella käynnityy ilman tuota failure tekstiä.
bootchart näyttää näin: mutta en tiedä sitten näkyykö se tuolla jos jumittaa?

[gdm]

Onko koneessa kiinni monta lisälaitetta?
Virhe johtuu luultavasti väärin tunnistetusta tai huonosti tuetusta laitteesta.
Kokeile poistaa lisälaitteita ja tarkkaile "dmesg"in tulostetta.

en tiedä mihin tuo 40.495983] PnP: PnPACPI method_name__crs failure for PnP0c01 vaikuttaa, mutta työpöydän nappulat ja resot saattavat muuttua ihan kummallisiksi kun käynnistän koneen uudelleen tai lukitsen näytön.

Mikä näytönohjain?

[adjektiivi]

lisälaitteita ovat nettipiuha ja kvm kytkin, ja luulisi että se sama failure teksti toistuisi toisessakin koneessa jos kvm kytkimestä johtuisi?
näyttis on nvidia geforce 8400gs

dmesg
 

Koodia: [Valitse]

   0.000000] ACPI: APIC 7FEE7A40, 0084 (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
[    0.000000] ACPI: SSDT 7FEE82E0, 0304 (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
[    0.000000] swsusp: Registered nosave memory region: 0000000000098000 - 0000000000099000
[    0.000000] swsusp: Registered nosave memory region: 0000000000099000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519906
[    0.000000] Kernel command line: root=UUID=2be58421-5a3c-497f-b9b2-d73e155c3ca0 ro quiet
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2000.586 MHz processor.
[   28.792158] Console: colour VGA+ 80x25
[   28.792162] console [tty0] enabled
[   28.792386] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   28.792630] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   28.872348] Memory: 2065920k/2095996k available (2177k kernel code, 28700k reserved, 1006k data, 368k init, 1178492k highmem)
[   28.872354] virtual kernel memory layout:
[   28.872355]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   28.872356]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   28.872357]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   28.872358]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   28.872358]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   28.872359]       .data : 0xc03204c4 - 0xc041bdc4   (1006 kB)
[   28.872360]       .text : 0xc0100000 - 0xc03204c4   (2177 kB)
[   28.872363] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   28.872400] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   28.872526] hpet clockevent registered
[   28.952397] Calibrating delay using timer specific routine.. 4004.30 BogoMIPS (lpj=8008607)
[   28.952421] Security Framework initialized
[   28.952425] SELinux:  Disabled at boot.
[   28.952434] AppArmor: AppArmor initialized
[   28.952438] Failure registering capabilities with primary security module.
[   28.952444] Mount-cache hash table entries: 512
[   28.952536] Initializing cgroup subsys ns
[   28.952539] Initializing cgroup subsys cpuacct
[   28.952547] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   28.952553] monitor/mwait feature present.
[   28.952554] using mwait in idle threads.
[   28.952557] CPU: L1 I cache: 32K, L1 D cache: 32K
[   28.952559] CPU: L2 cache: 2048K
[   28.952561] CPU: Physical Processor ID: 0
[   28.952562] CPU: Processor Core ID: 0
[   28.952564] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[   28.952571] Compat vDSO mapped to ffffe000.
[   28.952581] Checking 'hlt' instruction... OK.
[   28.968762] SMP alternatives: switching to UP code
[   28.970147] Early unpacking initramfs... done
[   29.254982] ACPI: Core revision 20070126
[   29.255016] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   29.266093] CPU0: Intel(R) Core(TM)2 Duo CPU     E4400  @ 2.00GHz stepping 0d
[   29.266109] SMP alternatives: switching to SMP code
[   29.266743] Booting processor 1/1 eip 3000
[   29.276868] Initializing CPU#1
[   29.355715] Calibrating delay using timer specific routine.. 4001.13 BogoMIPS (lpj=8002271)
[   29.355721] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[   29.355725] monitor/mwait feature present.
[   29.355728] CPU: L1 I cache: 32K, L1 D cache: 32K
[   29.355729] CPU: L2 cache: 2048K
[   29.355731] CPU: Physical Processor ID: 0
[   29.355732] CPU: Processor Core ID: 1
[   29.355734] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[   29.356214] CPU1: Intel(R) Core(TM)2 Duo CPU     E4400  @ 2.00GHz stepping 0d
[   29.356231] Total of 2 processors activated (8005.43 BogoMIPS).
[   29.356376] ENABLING IO-APIC IRQs
[   29.356540] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   29.503571] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   29.523551] Brought up 2 CPUs
[   29.523572] CPU0 attaching sched-domain:
[   29.523574]  domain 0: span 03
[   29.523575]   groups: 01 02
[   29.523578] CPU1 attaching sched-domain:
[   29.523579]  domain 0: span 03
[   29.523581]   groups: 02 01
[   29.523764] net_namespace: 64 bytes
[   29.523772] Booting paravirtualized kernel on bare hardware
[   29.524151] Time: 12:12:28  Date: 08/31/08
[   29.524174] NET: Registered protocol family 16
[   29.524328] EISA bus registered
[   29.524332] ACPI: bus type pci registered
[   29.548163] PCI: PCI BIOS revision 3.00 entry at 0xf1f00, last bus=2
[   29.548165] PCI: Using configuration type 1
[   29.548179] Setting up standard PCI resources
[   29.557794] ACPI: EC: Look up EC in DSDT
[   29.561617] ACPI: Interpreter enabled
[   29.561622] ACPI: (supports S0 S1 S3 S4 S5)
[   29.561636] ACPI: Using IOAPIC for interrupt routing
[   29.565181] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   29.566065] PCI: Transparent bridge - 0000:00:1e.0
[   29.566087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   29.566226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   29.575211] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[   29.575308] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   29.575408] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[   29.575503] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[   29.575597] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[   29.575692] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   29.575787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   29.575882] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[   29.575991] Linux Plug and Play Support v0.97 (c) Adam Belay
[   29.576020] pnp: PnP ACPI init
[   29.576027] ACPI: bus type pnp registered
[   29.577379] ACPI Error (dsopcode-0548): Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) [20070126]
[   29.577384] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.MEM_._CRS] (Node f7c4a990), AE_AML_BUFFER_LIMIT
[   29.577410] ACPI Error (uteval-0233): Method execution failed [\_SB_.MEM_._CRS] (Node f7c4a990), AE_AML_BUFFER_LIMIT
[   29.577416] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[   29.577467] pnp: PnP ACPI: found 10 devices
[   29.577468] ACPI: ACPI bus type pnp unregistered
[   29.577472] PnPBIOS: Disabled by ACPI PNP
[   29.577655] PCI: Using ACPI for IRQ routing
[   29.577658] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   29.611506] NET: Registered protocol family 8
[   29.611508] NET: Registered protocol family 20
[   29.611535] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   29.611539] hpet0: 3 64-bit timers, 14318180 Hz
[   29.612570] AppArmor: AppArmor Filesystem Enabled
[   29.615342] Time: tsc clocksource has been installed.
[   29.615357] Switched to high resolution mode on CPU 0
[   29.615452] Switched to high resolution mode on CPU 1
[   29.639337] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[   29.639341] system 00:01: ioport range 0x800-0x87f has been reserved
[   29.639344] system 00:01: ioport range 0x294-0x297 has been reserved
[   29.639348] system 00:01: ioport range 0x880-0x88f has been reserved
[   29.639359] system 00:07: ioport range 0x400-0x4bf has been reserved
[   29.639369] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
[   29.669685] PCI: Bridge: 0000:00:01.0
[   29.669687]   IO window: d000-dfff
[   29.669690]   MEM window: f8000000-fbffffff
[   29.669693]   PREFETCH window: e0000000-efffffff
[   29.669696] PCI: Bridge: 0000:00:1e.0
[   29.669698]   IO window: e000-efff
[   29.669702]   MEM window: fde00000-fdefffff
[   29.669705]   PREFETCH window: disabled.
[   29.669719] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   29.669723] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   29.669732] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   29.669741] NET: Registered protocol family 2
[   29.707248] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   29.707465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   29.707829] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   29.708017] TCP: Hash tables configured (established 131072 bind 65536)
[   29.708020] TCP reno registered
[   29.719325] checking if image is initramfs... it is
[   39.240221] Freeing initrd memory: 7311k freed
[   39.240861] audit: initializing netlink socket (disabled)
[   39.240874] audit(1220184757.257:1): initialized
[   39.241061] highmem bounce pool size: 64 pages
[   39.242656] VFS: Disk quotas dquot_6.5.1
[   39.242717] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   39.242824] io scheduler noop registered
[   39.242826] io scheduler anticipatory registered
[   39.242828] io scheduler deadline registered
[   39.242839] io scheduler cfq registered (default)
[   39.242930] Boot video device is 0000:01:00.0
[   39.242935] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[   39.243020] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   39.243052] assign_interrupt_mode Found MSI capability
[   39.243080] Allocate Port Service[0000:00:01.0:pcie00]
[   39.243275] isapnp: Scanning for PnP cards...
[   39.595963] isapnp: No Plug & Play device found
[   39.616478] Real Time Clock Driver v1.12ac
[   39.616625] hpet_resources: 0xfed00000 is busy
[   39.616661] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   39.617587] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   39.617642] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   39.617754] PNP: No PS/2 controller found. Probing ports directly.
[   39.620159] serio: i8042 KBD port at 0x60,0x64 irq 1
[   39.620163] serio: i8042 AUX port at 0x60,0x64 irq 12
[   39.638696] mice: PS/2 mouse device common for all mice
[   39.638815] EISA: Probing bus 0 at eisa.0
[   39.638842] EISA: Detected 0 cards.
[   39.638844] cpuidle: using governor ladder
[   39.638846] cpuidle: using governor menu
[   39.638918] NET: Registered protocol family 1
[   39.638942] Using IPI No-Shortcut mode
[   39.638967] registered taskstats version 1
[   39.639054]   Magic number: 4:781:229
[   39.639123] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   39.639124] EDD information not available.
[   39.639280] Freeing unused kernel memory: 368k freed
[   39.819430] fuse init (API version 7.9)
[   39.831784] ACPI: Fan [FAN] (on)
[   39.836778] ACPI: SSDT 7FEE7E00, 01B7 (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
[   39.837024] ACPI: SSDT 7FEE8210, 00CE (r1 HPQOEM SLIC-CPC 42302E31 AWRD        0)
[   39.837158] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   39.837167] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   39.838384] ACPI: Thermal Zone [THRM] (20 C)
[   39.975455] usbcore: registered new interface driver usbfs
[   39.975475] usbcore: registered new interface driver hub
[   39.975497] usbcore: registered new device driver usb
[   39.976440] USB Universal Host Controller Interface driver v3.0
[   39.976487] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[   39.976497] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   39.976500] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   39.976750] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   39.976776] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff00
[   39.976893] usb usb1: configuration #1 chosen from 1 choice
[   39.976913] hub 1-0:1.0: USB hub found
[   39.976917] hub 1-0:1.0: 2 ports detected
[   40.081947] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[   40.081958] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   40.081962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   40.081983] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   40.082009] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fe00
[   40.082103] usb usb2: configuration #1 chosen from 1 choice
[   40.082123] hub 2-0:1.0: USB hub found
[   40.082128] hub 2-0:1.0: 2 ports detected
[   40.133796] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[   40.133799] e100: Copyright(c) 1999-2006 Intel Corporation
[   40.149669] SCSI subsystem initialized
[   40.167419] libata version 3.00 loaded.
[   40.185761] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[   40.185773] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   40.185777] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   40.185801] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   40.185828] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000fd00
[   40.185937] usb usb3: configuration #1 chosen from 1 choice
[   40.185957] hub 3-0:1.0: USB hub found
[   40.185961] hub 3-0:1.0: 2 ports detected
[   40.289573] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   40.289584] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   40.289588] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   40.289610] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   40.289636] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[   40.289734] usb usb4: configuration #1 chosen from 1 choice
[   40.289754] hub 4-0:1.0: USB hub found
[   40.289758] hub 4-0:1.0: 2 ports detected
[   40.393420] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 20
[   40.425236] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   40.445052] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[1024]  IR/IT contexts=[8/8]
[   40.452110] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[   40.476316] e100: eth0: e100_probe: addr 0xfdefe000, irq 20, MAC addr 00:1b:fc:f8:a6:7f
[   40.476379] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[   40.476390] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   40.476393] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   40.476418] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   40.480314] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   40.480320] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfdfff000
[   40.550016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   40.550119] usb usb5: configuration #1 chosen from 1 choice
[   40.550140] hub 5-0:1.0: USB hub found
[   40.550146] hub 5-0:1.0: 8 ports detected

[adjektiivi]

Koodia: [Valitse]

[   40.652989] ahci 0000:00:1f.2: version 3.0
[   40.653030] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[   40.948350] usb 2-1: device not accepting address 2, error -71
[   41.611195] usb 5-7: new high speed USB device using ehci_hcd and address 3
[   41.655136] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[   41.655141] ahci 0000:00:1f.2: flags: 64bit ncq led clo
[   41.655146] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   41.655382] scsi0 : ahci
[   41.655561] scsi1 : ahci
[   41.655662] scsi2 : ahci
[   41.655758] scsi3 : ahci
[   41.655828] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 222
[   41.655831] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 222
[   41.655833] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 222
[   41.655836] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 222
[   41.719133] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80001633e1d]
[   41.760759] usb 5-7: configuration #1 chosen from 1 choice
[   41.998538] usb 2-1: new full speed USB device using uhci_hcd and address 4
[   42.131310] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   42.132125] ata1.00: ATA-7: ST3500630AS, 3.CHL, max UDMA/100
[   42.132130] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   42.133120] ata1.00: configured for UDMA/100
[   42.151770] usb 2-1: configuration #1 chosen from 1 choice
[   42.154670] hub 2-1:1.0: USB hub found
[   42.156636] hub 2-1:1.0: 4 ports detected
[   42.467131] usb 2-1.1: new full speed USB device using uhci_hcd and address 5
[   42.601033] usb 2-1.1: configuration #1 chosen from 1 choice
[   42.603937] hub 2-1.1:1.0: USB hub found
[   42.605900] hub 2-1.1:1.0: 4 ports detected
[   42.606513] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   42.764376] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33, ATAPI AN
[   42.764380] ata2.00: applying bridge limits
[   42.920007] ata2.00: configured for UDMA/33
[   42.922384] usb 2-1.2: new low speed USB device using uhci_hcd and address 6
[   43.061282] usb 2-1.2: configuration #1 chosen from 1 choice
[   43.232406] ata3: SATA link down (SStatus 0 SControl 300)
[   43.265822] usb 2-1.3: new low speed USB device using uhci_hcd and address 7
[   43.407725] usb 2-1.3: configuration #1 chosen from 1 choice
[   43.539874] ata4: SATA link down (SStatus 0 SControl 300)
[   43.540034] scsi 0:0:0:0: Direct-Access     ATA      ST3500630AS      3.CH PQ: 0 ANSI: 5
[   43.540910] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5
[   43.541116] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[   43.541145] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   43.541156] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   43.545197] ata_piix 0000:00:1f.1: version 2.12
[   43.545213] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[   43.545247] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   43.546867] scsi4 : ata_piix
[   43.547434] scsi5 : ata_piix
[   43.547717] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[   43.547719] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[   43.547922] Driver 'sd' needs updating - please use bus_type methods
[   43.547985] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   43.547996] sd 0:0:0:0: [sda] Write Protect is off
[   43.547998] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   43.548011] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   43.548050] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   43.548058] sd 0:0:0:0: [sda] Write Protect is off
[   43.548060] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   43.548074] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   43.548076]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   43.565678]  sda1 sda2 < sda5 >
[   43.587212] sd 0:0:0:0: [sda] Attached SCSI disk
[   43.591406] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   43.591423] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   43.595997] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[   43.596001] Uniform CD-ROM driver Revision: 3.20
[   43.596045] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   43.617249] usb 2-1.1.1: new low speed USB device using uhci_hcd and address 8
[   43.715061] ata6: port disabled. ignoring.
[   43.755149] usb 2-1.1.1: configuration #1 chosen from 1 choice
[   43.964675] usb 2-1.1.4: new full speed USB device using uhci_hcd and address 9
[   44.108569] usb 2-1.1.4: configuration #1 chosen from 1 choice
[   44.113461] usbcore: registered new interface driver libusual
[   44.113500] usbcore: registered new interface driver hiddev
[   44.118228] Initializing USB Mass Storage driver...
[   44.118989] scsi6 : SCSI emulation for USB Mass Storage devices
[   44.119486] usb-storage: device found at 3
[   44.119488] usb-storage: waiting for device to settle before scanning
[   44.129649] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
[   44.146871] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1.2
[   44.161595] input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
[   44.170804] input,hidraw1: USB HID v1.10 Keyboard [Justcom Technology USB KVM Switch] on usb-0000:00:1d.1-1.3
[   44.183532] input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input3
[   44.214756] input,hidraw2: USB HID v1.10 Mouse [Justcom Technology USB KVM Switch] on usb-0000:00:1d.1-1.3
[   44.228477] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input4
[   44.246674] input,hidraw3: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1d.1-1.1.1
[   44.278226] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input5
[   44.286634] input,hiddev96,hidraw4: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1d.1-1.1.1
[   44.292280] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/input/input6
[   44.302601] input,hiddev97,hidraw5: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1d.1-1.1.4
[   44.302621] usbcore: registered new interface driver usbhid
[   44.302626] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   44.303784] usbcore: registered new interface driver usb-storage
[   44.303788] USB Mass Storage support registered.
[   44.430970] Attempting manual resume
[   44.430973] swsusp: Resume From Partition 8:5
[   44.430975] PM: Checking swsusp image.
[   44.431110] PM: Resume from disk failed.
[   44.470432] kjournald starting.  Commit interval 5 seconds
[   44.470438] EXT3-fs: mounted filesystem with ordered data mode.
[   49.110492] usb-storage: device scan complete
[   49.116993] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[   49.123480] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[   49.130095] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[   49.136708] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[   49.137978] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   49.138023] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   49.139098] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   49.139138] sd 6:0:0:1: Attached scsi generic sg3 type 0
[   49.140220] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   49.140262] sd 6:0:0:2: Attached scsi generic sg4 type 0
[   49.141343] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   49.141385] sd 6:0:0:3: Attached scsi generic sg5 type 0
[   50.495920] Linux agpgart interface v0.102
[   50.539855] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   50.582916] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   50.660695] input: Power Button (FF) as /devices/virtual/input/input7
[   50.680537] ACPI: Power Button (FF) [PWRF]
[   50.680632] input: Power Button (CM) as /devices/virtual/input/input8
[   50.712469] ACPI: Power Button (CM) [PWRB]
[   51.194749] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[   51.194768] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   51.228421] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   51.300402] nvidia: module license 'NVIDIA' taints kernel.
[   51.558534] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   51.558543] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   51.558635] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   52.313889] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   53.285184] lp: driver loaded but no devices found
[   53.308344] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
[   53.308388] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
[   53.453011] TCP cubic registered
[   53.472571] Adding 6072528k swap on /dev/sda5.  Priority:-1 extents:1 across:6072528k
[   53.772413] EXT3 FS on sda1, internal journal
[   54.281196] ip_tables: (C) 2000-2006 Netfilter Core Team
[  457.252133] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[  459.459574] NET: Registered protocol family 17
a245@a245-desktop:~$

tässä loput tekstitstä kun ei mahtunut samaan vietiin