301
Laitealue / Vs: pinnacle PCTV DVB-T Stick solo toimaan
« : 08.08.08 - klo:15.31 »
pitäisikö toiminnan näkyä jotenkin? nyt olen ottanut tikun irti ja boottinut ja laitoin takaisin.
Ubuntu Suomen keskustelualueet
Uutiset:
Ubuntu 24.04 LTS | Lataa ja asenna | Tutustu yhteisöön | Blogi | Yritysten tarjoamat palvelut
Valmistajien tukemat Ubuntu-tietokoneet: kannettavatietokone.fi uudet ja käytetyt sekä Lenovo-verkkokauppa
Näytä kirjoitukset
Tässä osiossa voit tarkastella kaikkia tämän jäsenen viestejä. Huomaa, että näet viestit vain niiltä alueilta, joihin sinulla on pääsy.
302
Laitealue / Vs: pinnacle PCTV DVB-T Stick solo toimaan
« : 08.08.08 - klo:15.17 »
54.926666] dib0700: loaded with support for 7 different device-types
[ 54.928915] dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[ 55.585195] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 55.790150] usbcore: registered new interface driver dvb_usb_dib0700
[ 55.937442] lp: driver loaded but no devices found
[ 56.022203] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k
[ 56.558983] EXT3 FS on sda1, internal journal
[ 57.658955] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 58.020634] No dock devices found.
[ 59.061206] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 59.061211] apm: disabled - APM is not SMP safe.
[ 59.166684] ppdev: user-space parallel port driver
[ 59.280814] audit(1218187455.459:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5160 profile="/usr/sbin/cupsd" namespace="default"
[ 59.414341] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 59.414348] vboxdrv: Successfully done.
ei taida toimia vieläkään
[ 54.928915] dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[ 55.585195] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 55.790150] usbcore: registered new interface driver dvb_usb_dib0700
[ 55.937442] lp: driver loaded but no devices found
[ 56.022203] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k
[ 56.558983] EXT3 FS on sda1, internal journal
[ 57.658955] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 58.020634] No dock devices found.
[ 59.061206] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 59.061211] apm: disabled - APM is not SMP safe.
[ 59.166684] ppdev: user-space parallel port driver
[ 59.280814] audit(1218187455.459:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5160 profile="/usr/sbin/cupsd" namespace="default"
[ 59.414341] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 59.414348] vboxdrv: Successfully done.
ei taida toimia vieläkään
303
Laitealue / Vs: pinnacle PCTV DVB-T Stick solo toimaan
« : 08.08.08 - klo:15.05 »
bootinko nyt koneen kun olen käyttäny tikkua pois? vai mitäs?
304
Laitealue / Vs: pinnacle PCTV DVB-T Stick solo toimaan
« : 08.08.08 - klo:12.07 »
ei toimi.
tämän ohjeen mukan olen tehnyt:
sanokaa jos jotain pitää tehdä eritavalla.
tämän ohjeen mukan olen tehnyt:
Koodia: [Valitse]
wget http://www.barbak.org/v4l_for_72e_dongle.tar.bz2
tar xvjf v4l_for_72e_dongle.tar.bz2
cd v4l-dvb
sudo cp firmware/dvb-usb-dib0700-1.10.fw /lib/firmware/
make all
sudo make install
sudo rebootsanokaa jos jotain pitää tehdä eritavalla.
305
Laitealue / Vs: pinnacle PCTV DVB-T Stick solo toimaan
« : 08.08.08 - klo:00.17 »
[ 40.127344] io scheduler noop registered
[ 40.127346] io scheduler anticipatory registered
[ 40.127348] io scheduler deadline registered
[ 40.127359] io scheduler cfq registered (default)
[ 40.127450] Boot video device is 0000:01:00.0
[ 40.127454] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 40.127537] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 40.127570] assign_interrupt_mode Found MSI capability
[ 40.127598] Allocate Port Service[0000:00:01.0:pcie00]
[ 40.127782] isapnp: Scanning for PnP cards...
[ 40.480468] isapnp: No Plug & Play device found
[ 40.500790] Real Time Clock Driver v1.12ac
[ 40.500940] hpet_resources: 0xfed00000 is busy
[ 40.500975] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 40.501898] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 40.501953] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 40.502064] PNP: No PS/2 controller found. Probing ports directly.
[ 40.504459] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 40.504463] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 40.522458] mice: PS/2 mouse device common for all mice
[ 40.522576] EISA: Probing bus 0 at eisa.0
[ 40.522602] EISA: Detected 0 cards.
[ 40.522605] cpuidle: using governor ladder
[ 40.522607] cpuidle: using governor menu
[ 40.522679] NET: Registered protocol family 1
[ 40.522704] Using IPI No-Shortcut mode
[ 40.522730] registered taskstats version 1
[ 40.522818] Magic number: 4:135:647
[ 40.522845] hash matches device ptydc
[ 40.522889] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 40.522891] EDD information not available.
[ 40.523049] Freeing unused kernel memory: 368k freed
[ 41.703212] fuse init (API version 7.9)
[ 41.715190] ACPI: Fan [FAN] (on)
[ 41.720242] ACPI: SSDT 7FEE7E00, 01B7 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 41.720544] ACPI: SSDT 7FEE8210, 00CE (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 41.720679] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 41.720688] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 41.721914] ACPI: Thermal Zone [THRM] (19 C)
[ 41.891352] usbcore: registered new interface driver usbfs
[ 41.891373] usbcore: registered new interface driver hub
[ 41.892024] usbcore: registered new device driver usb
[ 41.901070] USB Universal Host Controller Interface driver v3.0
[ 41.901124] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 41.901135] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 41.901138] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 41.901365] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 41.901430] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff00
[ 41.901547] usb usb1: configuration #1 chosen from 1 choice
[ 41.901570] hub 1-0:1.0: USB hub found
[ 41.901574] hub 1-0:1.0: 2 ports detected
[ 42.004928] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 18
[ 42.004939] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 42.004942] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 42.004964] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 42.005027] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fe00
[ 42.005122] usb usb2: configuration #1 chosen from 1 choice
[ 42.005141] hub 2-0:1.0: USB hub found
[ 42.005145] hub 2-0:1.0: 2 ports detected
[ 42.019856] SCSI subsystem initialized
[ 42.058334] libata version 3.00 loaded.
[ 42.101699] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 42.101703] e100: Copyright(c) 1999-2006 Intel Corporation
[ 42.108769] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 42.108780] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 42.108784] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 42.108813] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 42.108876] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000fd00
[ 42.108968] usb usb3: configuration #1 chosen from 1 choice
[ 42.108989] hub 3-0:1.0: USB hub found
[ 42.108993] hub 3-0:1.0: 2 ports detected
[ 42.212561] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 42.212572] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 42.212575] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 42.212596] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 42.212659] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 42.212754] usb usb4: configuration #1 chosen from 1 choice
[ 42.212775] hub 4-0:1.0: USB hub found
[ 42.212779] hub 4-0:1.0: 2 ports detected
[ 42.243431] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 42.316403] ahci 0000:00:1f.2: version 3.0
[ 42.316434] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 18
[ 42.406711] usb 1-1: configuration #1 chosen from 1 choice
[ 42.646748] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 42.791893] usb 2-2: configuration #1 chosen from 1 choice
[ 42.794792] hub 2-2:1.0: USB hub found
[ 42.796758] hub 2-2:1.0: 4 ports detected
[ 43.145917] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 43.317634] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 43.317639] ahci 0000:00:1f.2: flags: 64bit ncq led clo
[ 43.317645] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 43.317873] scsi0 : ahci
[ 43.318025] scsi1 : ahci
[ 43.318124] scsi2 : ahci
[ 43.318224] scsi3 : ahci
[ 43.318294] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 222
[ 43.318296] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 222
[ 43.318299] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 222
[ 43.318301] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 222
[ 43.326974] usb 4-1: configuration #1 chosen from 1 choice
[ 43.538545] usb 2-2.1: new full speed USB device using uhci_hcd and address 3
[ 43.672441] usb 2-2.1: configuration #1 chosen from 1 choice
[ 43.675354] hub 2-2.1:1.0: USB hub found
[ 43.677314] hub 2-2.1:1.0: 4 ports detected
[ 43.793846] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 43.794785] ata1.00: ATA-7: ST3500630AS, 3.CHL, max UDMA/100
[ 43.794790] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 43.795774] ata1.00: configured for UDMA/100
[ 43.989804] usb 2-2.2: new low speed USB device using uhci_hcd and address 4
[ 44.128693] usb 2-2.2: configuration #1 chosen from 1 choice
[ 44.268004] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 44.333241] usb 2-2.3: new low speed USB device using uhci_hcd and address 5
[ 44.426783] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33, ATAPI AN
[ 44.426787] ata2.00: applying bridge limits
[ 44.475129] usb 2-2.3: configuration #1 chosen from 1 choice
[ 44.582620] ata2.00: configured for UDMA/33
[ 44.688659] usb 2-2.1.1: new low speed USB device using uhci_hcd and address 6
[ 44.826562] usb 2-2.1.1: configuration #1 chosen from 1 choice
[ 44.894945] ata3: SATA link down (SStatus 0 SControl 300)
[ 45.044077] usb 2-2.1.4: new full speed USB device using uhci_hcd and address 7
[ 45.182927] usb 2-2.1.4: configuration #1 chosen from 1 choice
[ 45.187502] usbcore: registered new interface driver libusual
[ 45.187727] usbcore: registered new interface driver hiddev
[ 45.198806] Initializing USB Mass Storage driver...
[ 45.199345] scsi4 : SCSI emulation for USB Mass Storage devices
[ 45.199889] usb-storage: device found at 2
[ 45.199891] usb-storage: waiting for device to settle before scanning
[ 45.204048] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input1
[ 45.211410] ata4: SATA link down (SStatus 0 SControl 300)
[ 45.211562] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.CH PQ: 0 ANSI: 5
[ 45.212435] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5
[ 45.212576] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[ 45.212588] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 45.212592] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 45.212615] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 45.216532] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 45.216537] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfdfff000
[ 45.224881] Driver 'sd' needs updating - please use bus_type methods
[ 45.224940] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 45.224950] sd 0:0:0:0: [sda] Write Protect is off
[ 45.224952] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 45.224966] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 45.225006] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 45.225015] sd 0:0:0:0: [sda] Write Protect is off
[ 45.225016] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 45.225030] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 45.225033] sda:<6>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2.2
[ 45.230183] Driver 'sr' needs updating - please use bus_type methods
[ 45.231357] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 45.231504] usb usb5: configuration #1 chosen from 1 choice
[ 45.231531] hub 5-0:1.0: USB hub found
[ 45.231536] hub 5-0:1.0: 8 ports detected
[ 45.243865] sda1 sda2 < sda5 >
[ 45.265393] sd 0:0:0:0: [sda] Attached SCSI disk
[ 45.270056] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 45.270074] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 45.274655] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 45.274659] Uniform CD-ROM driver Revision: 3.20
[ 45.274700] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 45.311665] usbcore: registered new interface driver usbhid
[ 45.311670] usbcore: registered new interface driver usb-storage
[ 45.311674] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 45.311679] USB Mass Storage support registered.
[ 45.335402] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 45.496927] e100: eth0: e100_probe: addr 0xfdefe000, irq 20, MAC addr 00:1b:fc:f8:a6:7f
[ 45.496962] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 45.548657] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
[ 45.556038] ata_piix 0000:00:1f.1: version 2.12
[ 45.556054] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 45.556087] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 45.556720] scsi5 : ata_piix
[ 45.557183] scsi6 : ata_piix
[ 45.557471] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 45.557473] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 45.634298] Attempting manual resume
[ 45.634301] swsusp: Resume From Partition 8:5
[ 45.634302] PM: Checking swsusp image.
[ 45.634399] PM: Resume from disk failed.
[ 45.674617] kjournald starting. Commit interval 5 seconds
[ 45.674624] EXT3-fs: mounted filesystem with ordered data mode.
[ 45.702578] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 45.720939] ata6: port disabled. ignoring.
[ 45.834303] usb 5-1: configuration #1 chosen from 1 choice
[ 46.312539] usb 5-7: new high speed USB device using ehci_hcd and address 4
[ 46.462012] usb 5-7: configuration #1 chosen from 1 choice
[ 46.462609] scsi7 : SCSI emulation for USB Mass Storage devices
[ 46.462660] usb-storage: device found at 4
[ 46.462662] usb-storage: waiting for device to settle before scanning
[ 46.463527] usb 1-1: USB disconnect, address 2
[ 46.588084] usb 2-2: USB disconnect, address 2
[ 46.588088] usb 2-2.1: USB disconnect, address 3
[ 46.588091] usb 2-2.1.1: USB disconnect, address 6
[ 46.588304] usb 2-2.1.4: USB disconnect, address 7
[ 46.589701] usb 2-2.2: USB disconnect, address 4
[ 46.604224] usb 2-2.3: USB disconnect, address 5
[ 46.824779] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001633e1d]
[ 46.847624] usb 2-2: new full speed USB device using uhci_hcd and address 8
[ 46.996976] usb 2-2: configuration #1 chosen from 1 choice
[ 46.999893] hub 2-2:1.0: USB hub found
[ 47.001866] hub 2-2:1.0: 4 ports detected
[ 47.111252] usb 4-1: USB disconnect, address 2
[ 47.440146] usb 2-2.1: new full speed USB device using uhci_hcd and address 9
[ 47.574036] usb 2-2.1: configuration #1 chosen from 1 choice
[ 47.576965] hub 2-2.1:1.0: USB hub found
[ 47.578920] hub 2-2.1:1.0: 4 ports detected
[ 47.891405] usb 2-2.2: new low speed USB device using uhci_hcd and address 10
[ 48.030277] usb 2-2.2: configuration #1 chosen from 1 choice
[ 48.049379] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input2
[ 48.061606] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2.2
[ 48.266791] usb 2-2.3: new low speed USB device using uhci_hcd and address 11
[ 48.412658] usb 2-2.3: configuration #1 chosen from 1 choice
[ 48.430769] input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.3/2-2.3:1.0/input/input3
[ 48.440973] input,hidraw1: USB HID v1.10 Keyboard [Justcom Technology USB KVM Switch] on usb-0000:00:1d.1-2.3
[ 48.453682] input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.3/2-2.3:1.1/input/input4
[ 48.464924] input,hidraw2: USB HID v1.10 Mouse [Justcom Technology USB KVM Switch] on usb-0000:00:1d.1-2.3
[ 48.670128] usb 2-2.1.1: new low speed USB device using uhci_hcd and address 12
[ 48.799022] usb 2-2.1.1: configuration #1 chosen from 1 choice
[ 48.816118] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.1/2-2.1.1/2-2.1.1:1.0/input/input5
[ 48.832276] input,hidraw3: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1d.1-2.1.1
[ 48.864876] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.1/2-2.1.1/2-2.1.1:1.1/input/input6
[ 48.876232] input,hiddev96,hidraw4: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1d.1-2.1.1
[ 49.081454] usb 2-2.1.4: new full speed USB device using uhci_hcd and address 13
[ 49.228317] usb 2-2.1.4: configuration #1 chosen from 1 choice
[ 49.237329] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.1/2-2.1.4/2-2.1.4:1.0/input/input7
[ 49.247587] input,hiddev97,hidraw5: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1d.1-2.1.4
[ 51.459027] usb-storage: device scan complete
[ 51.465506] scsi 7:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 51.471996] scsi 7:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 51.478610] scsi 7:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 51.485233] scsi 7:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 51.486616] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 51.486660] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 51.487735] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[ 51.487774] sd 7:0:0:1: Attached scsi generic sg3 type 0
[ 51.488855] sd 7:0:0:2: [sdd] Attached SCSI removable disk
[ 51.488895] sd 7:0:0:2: Attached scsi generic sg4 type 0
[ 51.489983] sd 7:0:0:3: [sde] Attached SCSI removable disk
[ 51.490024] sd 7:0:0:3: Attached scsi generic sg5 type 0
[ 52.496741] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 52.517631] Linux agpgart interface v0.102
[ 52.565928] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 52.574790] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 52.843011] input: Power Button (FF) as /devices/virtual/input/input9
[ 52.906382] ACPI: Power Button (FF) [PWRF]
[ 52.906450] input: Power Button (CM) as /devices/virtual/input/input10
[ 52.966257] ACPI: Power Button (CM) [PWRB]
[ 53.506652] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 53.506674] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 53.538078] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 53.571357] nvidia: module license 'NVIDIA' taints kernel.
[ 54.007293] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 54.007302] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 54.007384] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 54.135386] dib0700: loaded with support for 7 different device-types
[ 54.135843] dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[ 54.801171] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 55.006079] usbcore: registered new interface driver dvb_usb_dib0700
[ 55.170886] lp: driver loaded but no devices found
[ 55.260694] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k
[ 55.792727] EXT3 FS on sda1, internal journal
[ 56.967238] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 57.328912] No dock devices found.
[ 58.377744] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 58.377748] apm: disabled - APM is not SMP safe.
[ 58.491621] ppdev: user-space parallel port driver
[ 58.636683] audit(1218137801.574:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5194 profile="/usr/sbin/cupsd" namespace="default"
[ 58.764138] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 58.764144] vboxdrv: Successfully done.
[ 58.764192] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 58.764195] vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).
[ 59.963163] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 60.053720] Bluetooth: Core ver 2.11
[ 60.053977] NET: Registered protocol family 31
[ 60.053982] Bluetooth: HCI device and connection manager initialized
[ 60.053986] Bluetooth: HCI socket layer initialized
[ 60.080402] Bluetooth: L2CAP ver 2.9
[ 60.080408] Bluetooth: L2CAP socket layer initialized
[ 60.151771] Bluetooth: RFCOMM socket layer initialized
[ 60.151969] Bluetooth: RFCOMM TTY layer initialized
[ 60.151973] Bluetooth: RFCOMM ver 1.8
[ 64.402174] NET: Registered protocol family 17
[ 70.456805] NET: Registered protocol family 10
[ 70.457120] lo: Disabled Privacy Extensions
[ 80.618199] eth0: no IPv6 routers present
kaikki eivät mahtuneet koska suurin sallitty määrä on 20000 merkkiä.
[ 40.127346] io scheduler anticipatory registered
[ 40.127348] io scheduler deadline registered
[ 40.127359] io scheduler cfq registered (default)
[ 40.127450] Boot video device is 0000:01:00.0
[ 40.127454] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 40.127537] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 40.127570] assign_interrupt_mode Found MSI capability
[ 40.127598] Allocate Port Service[0000:00:01.0:pcie00]
[ 40.127782] isapnp: Scanning for PnP cards...
[ 40.480468] isapnp: No Plug & Play device found
[ 40.500790] Real Time Clock Driver v1.12ac
[ 40.500940] hpet_resources: 0xfed00000 is busy
[ 40.500975] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 40.501898] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 40.501953] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 40.502064] PNP: No PS/2 controller found. Probing ports directly.
[ 40.504459] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 40.504463] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 40.522458] mice: PS/2 mouse device common for all mice
[ 40.522576] EISA: Probing bus 0 at eisa.0
[ 40.522602] EISA: Detected 0 cards.
[ 40.522605] cpuidle: using governor ladder
[ 40.522607] cpuidle: using governor menu
[ 40.522679] NET: Registered protocol family 1
[ 40.522704] Using IPI No-Shortcut mode
[ 40.522730] registered taskstats version 1
[ 40.522818] Magic number: 4:135:647
[ 40.522845] hash matches device ptydc
[ 40.522889] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 40.522891] EDD information not available.
[ 40.523049] Freeing unused kernel memory: 368k freed
[ 41.703212] fuse init (API version 7.9)
[ 41.715190] ACPI: Fan [FAN] (on)
[ 41.720242] ACPI: SSDT 7FEE7E00, 01B7 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 41.720544] ACPI: SSDT 7FEE8210, 00CE (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 41.720679] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 41.720688] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 41.721914] ACPI: Thermal Zone [THRM] (19 C)
[ 41.891352] usbcore: registered new interface driver usbfs
[ 41.891373] usbcore: registered new interface driver hub
[ 41.892024] usbcore: registered new device driver usb
[ 41.901070] USB Universal Host Controller Interface driver v3.0
[ 41.901124] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 41.901135] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 41.901138] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 41.901365] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 41.901430] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff00
[ 41.901547] usb usb1: configuration #1 chosen from 1 choice
[ 41.901570] hub 1-0:1.0: USB hub found
[ 41.901574] hub 1-0:1.0: 2 ports detected
[ 42.004928] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 18
[ 42.004939] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 42.004942] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 42.004964] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 42.005027] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fe00
[ 42.005122] usb usb2: configuration #1 chosen from 1 choice
[ 42.005141] hub 2-0:1.0: USB hub found
[ 42.005145] hub 2-0:1.0: 2 ports detected
[ 42.019856] SCSI subsystem initialized
[ 42.058334] libata version 3.00 loaded.
[ 42.101699] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 42.101703] e100: Copyright(c) 1999-2006 Intel Corporation
[ 42.108769] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 42.108780] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 42.108784] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 42.108813] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 42.108876] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000fd00
[ 42.108968] usb usb3: configuration #1 chosen from 1 choice
[ 42.108989] hub 3-0:1.0: USB hub found
[ 42.108993] hub 3-0:1.0: 2 ports detected
[ 42.212561] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 42.212572] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 42.212575] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 42.212596] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 42.212659] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 42.212754] usb usb4: configuration #1 chosen from 1 choice
[ 42.212775] hub 4-0:1.0: USB hub found
[ 42.212779] hub 4-0:1.0: 2 ports detected
[ 42.243431] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 42.316403] ahci 0000:00:1f.2: version 3.0
[ 42.316434] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 18
[ 42.406711] usb 1-1: configuration #1 chosen from 1 choice
[ 42.646748] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 42.791893] usb 2-2: configuration #1 chosen from 1 choice
[ 42.794792] hub 2-2:1.0: USB hub found
[ 42.796758] hub 2-2:1.0: 4 ports detected
[ 43.145917] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 43.317634] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 43.317639] ahci 0000:00:1f.2: flags: 64bit ncq led clo
[ 43.317645] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 43.317873] scsi0 : ahci
[ 43.318025] scsi1 : ahci
[ 43.318124] scsi2 : ahci
[ 43.318224] scsi3 : ahci
[ 43.318294] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 222
[ 43.318296] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 222
[ 43.318299] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 222
[ 43.318301] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 222
[ 43.326974] usb 4-1: configuration #1 chosen from 1 choice
[ 43.538545] usb 2-2.1: new full speed USB device using uhci_hcd and address 3
[ 43.672441] usb 2-2.1: configuration #1 chosen from 1 choice
[ 43.675354] hub 2-2.1:1.0: USB hub found
[ 43.677314] hub 2-2.1:1.0: 4 ports detected
[ 43.793846] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 43.794785] ata1.00: ATA-7: ST3500630AS, 3.CHL, max UDMA/100
[ 43.794790] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 43.795774] ata1.00: configured for UDMA/100
[ 43.989804] usb 2-2.2: new low speed USB device using uhci_hcd and address 4
[ 44.128693] usb 2-2.2: configuration #1 chosen from 1 choice
[ 44.268004] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 44.333241] usb 2-2.3: new low speed USB device using uhci_hcd and address 5
[ 44.426783] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33, ATAPI AN
[ 44.426787] ata2.00: applying bridge limits
[ 44.475129] usb 2-2.3: configuration #1 chosen from 1 choice
[ 44.582620] ata2.00: configured for UDMA/33
[ 44.688659] usb 2-2.1.1: new low speed USB device using uhci_hcd and address 6
[ 44.826562] usb 2-2.1.1: configuration #1 chosen from 1 choice
[ 44.894945] ata3: SATA link down (SStatus 0 SControl 300)
[ 45.044077] usb 2-2.1.4: new full speed USB device using uhci_hcd and address 7
[ 45.182927] usb 2-2.1.4: configuration #1 chosen from 1 choice
[ 45.187502] usbcore: registered new interface driver libusual
[ 45.187727] usbcore: registered new interface driver hiddev
[ 45.198806] Initializing USB Mass Storage driver...
[ 45.199345] scsi4 : SCSI emulation for USB Mass Storage devices
[ 45.199889] usb-storage: device found at 2
[ 45.199891] usb-storage: waiting for device to settle before scanning
[ 45.204048] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input1
[ 45.211410] ata4: SATA link down (SStatus 0 SControl 300)
[ 45.211562] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.CH PQ: 0 ANSI: 5
[ 45.212435] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5
[ 45.212576] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[ 45.212588] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 45.212592] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 45.212615] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 45.216532] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 45.216537] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfdfff000
[ 45.224881] Driver 'sd' needs updating - please use bus_type methods
[ 45.224940] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 45.224950] sd 0:0:0:0: [sda] Write Protect is off
[ 45.224952] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 45.224966] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 45.225006] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 45.225015] sd 0:0:0:0: [sda] Write Protect is off
[ 45.225016] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 45.225030] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 45.225033] sda:<6>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2.2
[ 45.230183] Driver 'sr' needs updating - please use bus_type methods
[ 45.231357] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 45.231504] usb usb5: configuration #1 chosen from 1 choice
[ 45.231531] hub 5-0:1.0: USB hub found
[ 45.231536] hub 5-0:1.0: 8 ports detected
[ 45.243865] sda1 sda2 < sda5 >
[ 45.265393] sd 0:0:0:0: [sda] Attached SCSI disk
[ 45.270056] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 45.270074] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 45.274655] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 45.274659] Uniform CD-ROM driver Revision: 3.20
[ 45.274700] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 45.311665] usbcore: registered new interface driver usbhid
[ 45.311670] usbcore: registered new interface driver usb-storage
[ 45.311674] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 45.311679] USB Mass Storage support registered.
[ 45.335402] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 45.496927] e100: eth0: e100_probe: addr 0xfdefe000, irq 20, MAC addr 00:1b:fc:f8:a6:7f
[ 45.496962] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 45.548657] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
[ 45.556038] ata_piix 0000:00:1f.1: version 2.12
[ 45.556054] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 45.556087] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 45.556720] scsi5 : ata_piix
[ 45.557183] scsi6 : ata_piix
[ 45.557471] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 45.557473] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 45.634298] Attempting manual resume
[ 45.634301] swsusp: Resume From Partition 8:5
[ 45.634302] PM: Checking swsusp image.
[ 45.634399] PM: Resume from disk failed.
[ 45.674617] kjournald starting. Commit interval 5 seconds
[ 45.674624] EXT3-fs: mounted filesystem with ordered data mode.
[ 45.702578] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 45.720939] ata6: port disabled. ignoring.
[ 45.834303] usb 5-1: configuration #1 chosen from 1 choice
[ 46.312539] usb 5-7: new high speed USB device using ehci_hcd and address 4
[ 46.462012] usb 5-7: configuration #1 chosen from 1 choice
[ 46.462609] scsi7 : SCSI emulation for USB Mass Storage devices
[ 46.462660] usb-storage: device found at 4
[ 46.462662] usb-storage: waiting for device to settle before scanning
[ 46.463527] usb 1-1: USB disconnect, address 2
[ 46.588084] usb 2-2: USB disconnect, address 2
[ 46.588088] usb 2-2.1: USB disconnect, address 3
[ 46.588091] usb 2-2.1.1: USB disconnect, address 6
[ 46.588304] usb 2-2.1.4: USB disconnect, address 7
[ 46.589701] usb 2-2.2: USB disconnect, address 4
[ 46.604224] usb 2-2.3: USB disconnect, address 5
[ 46.824779] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001633e1d]
[ 46.847624] usb 2-2: new full speed USB device using uhci_hcd and address 8
[ 46.996976] usb 2-2: configuration #1 chosen from 1 choice
[ 46.999893] hub 2-2:1.0: USB hub found
[ 47.001866] hub 2-2:1.0: 4 ports detected
[ 47.111252] usb 4-1: USB disconnect, address 2
[ 47.440146] usb 2-2.1: new full speed USB device using uhci_hcd and address 9
[ 47.574036] usb 2-2.1: configuration #1 chosen from 1 choice
[ 47.576965] hub 2-2.1:1.0: USB hub found
[ 47.578920] hub 2-2.1:1.0: 4 ports detected
[ 47.891405] usb 2-2.2: new low speed USB device using uhci_hcd and address 10
[ 48.030277] usb 2-2.2: configuration #1 chosen from 1 choice
[ 48.049379] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input2
[ 48.061606] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2.2
[ 48.266791] usb 2-2.3: new low speed USB device using uhci_hcd and address 11
[ 48.412658] usb 2-2.3: configuration #1 chosen from 1 choice
[ 48.430769] input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.3/2-2.3:1.0/input/input3
[ 48.440973] input,hidraw1: USB HID v1.10 Keyboard [Justcom Technology USB KVM Switch] on usb-0000:00:1d.1-2.3
[ 48.453682] input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.3/2-2.3:1.1/input/input4
[ 48.464924] input,hidraw2: USB HID v1.10 Mouse [Justcom Technology USB KVM Switch] on usb-0000:00:1d.1-2.3
[ 48.670128] usb 2-2.1.1: new low speed USB device using uhci_hcd and address 12
[ 48.799022] usb 2-2.1.1: configuration #1 chosen from 1 choice
[ 48.816118] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.1/2-2.1.1/2-2.1.1:1.0/input/input5
[ 48.832276] input,hidraw3: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1d.1-2.1.1
[ 48.864876] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.1/2-2.1.1/2-2.1.1:1.1/input/input6
[ 48.876232] input,hiddev96,hidraw4: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1d.1-2.1.1
[ 49.081454] usb 2-2.1.4: new full speed USB device using uhci_hcd and address 13
[ 49.228317] usb 2-2.1.4: configuration #1 chosen from 1 choice
[ 49.237329] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2.1/2-2.1.4/2-2.1.4:1.0/input/input7
[ 49.247587] input,hiddev97,hidraw5: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1d.1-2.1.4
[ 51.459027] usb-storage: device scan complete
[ 51.465506] scsi 7:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 51.471996] scsi 7:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 51.478610] scsi 7:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 51.485233] scsi 7:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 51.486616] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 51.486660] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 51.487735] sd 7:0:0:1: [sdc] Attached SCSI removable disk
[ 51.487774] sd 7:0:0:1: Attached scsi generic sg3 type 0
[ 51.488855] sd 7:0:0:2: [sdd] Attached SCSI removable disk
[ 51.488895] sd 7:0:0:2: Attached scsi generic sg4 type 0
[ 51.489983] sd 7:0:0:3: [sde] Attached SCSI removable disk
[ 51.490024] sd 7:0:0:3: Attached scsi generic sg5 type 0
[ 52.496741] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 52.517631] Linux agpgart interface v0.102
[ 52.565928] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 52.574790] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 52.843011] input: Power Button (FF) as /devices/virtual/input/input9
[ 52.906382] ACPI: Power Button (FF) [PWRF]
[ 52.906450] input: Power Button (CM) as /devices/virtual/input/input10
[ 52.966257] ACPI: Power Button (CM) [PWRB]
[ 53.506652] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 53.506674] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 53.538078] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 53.571357] nvidia: module license 'NVIDIA' taints kernel.
[ 54.007293] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 54.007302] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 54.007384] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 54.135386] dib0700: loaded with support for 7 different device-types
[ 54.135843] dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[ 54.801171] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 55.006079] usbcore: registered new interface driver dvb_usb_dib0700
[ 55.170886] lp: driver loaded but no devices found
[ 55.260694] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k
[ 55.792727] EXT3 FS on sda1, internal journal
[ 56.967238] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 57.328912] No dock devices found.
[ 58.377744] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 58.377748] apm: disabled - APM is not SMP safe.
[ 58.491621] ppdev: user-space parallel port driver
[ 58.636683] audit(1218137801.574:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5194 profile="/usr/sbin/cupsd" namespace="default"
[ 58.764138] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 58.764144] vboxdrv: Successfully done.
[ 58.764192] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 58.764195] vboxdrv: Successfully loaded version 1.5.6_OSE (interface 0x00050002).
[ 59.963163] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 60.053720] Bluetooth: Core ver 2.11
[ 60.053977] NET: Registered protocol family 31
[ 60.053982] Bluetooth: HCI device and connection manager initialized
[ 60.053986] Bluetooth: HCI socket layer initialized
[ 60.080402] Bluetooth: L2CAP ver 2.9
[ 60.080408] Bluetooth: L2CAP socket layer initialized
[ 60.151771] Bluetooth: RFCOMM socket layer initialized
[ 60.151969] Bluetooth: RFCOMM TTY layer initialized
[ 60.151973] Bluetooth: RFCOMM ver 1.8
[ 64.402174] NET: Registered protocol family 17
[ 70.456805] NET: Registered protocol family 10
[ 70.457120] lo: Disabled Privacy Extensions
[ 80.618199] eth0: no IPv6 routers present
kaikki eivät mahtuneet koska suurin sallitty määrä on 20000 merkkiä.
306
Laitealue / Vs: pinnacle PCTV DVB-T Stick solo toimaan
« : 07.08.08 - klo:23.26 »
jaa en ole varma onko minulla se?
dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[ 54.801171] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 55.006079] usbcore: registered new interface driver dvb_usb_dib0700
[ 55.170886] lp: driver loaded but no devices found
[ 55.260694] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:
dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[ 54.801171] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
[ 55.006079] usbcore: registered new interface driver dvb_usb_dib0700
[ 55.170886] lp: driver loaded but no devices found
[ 55.260694] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:
307
Laitealue / pinnacle PCTV DVB-T Stick solo toimaan
« : 07.08.08 - klo:22.31 »
Kyseessä on siis usb tikku.
Omistan tälläisen tikun ja en ole saanut sitä toimimaan ubuntussa, olisiko neuvoja?
kirjoitin lsusb niin se löytää Bus 005 Device 004: ID 2304:0236 Pinnacle Systems, Inc. [hex]
olen kaffeinella koittanut, mutta en tiedä mitä laittaa noihin portteihin.. mistä saan tietää mitä niihin pitäisi laittaa? keffeine sanoo vain "Can't bind info socket!!!" auttakaa joku pikkusen. =)
tai onko parempia ohjelmia kuin keffeine?
olen asentanut myöskin uusimmat v4l ajurit.
toivottavasti löytyy jokin ratkaisu niin tikku pääsee käyttöön
Omistan tälläisen tikun ja en ole saanut sitä toimimaan ubuntussa, olisiko neuvoja?
kirjoitin lsusb niin se löytää Bus 005 Device 004: ID 2304:0236 Pinnacle Systems, Inc. [hex]
olen kaffeinella koittanut, mutta en tiedä mitä laittaa noihin portteihin.. mistä saan tietää mitä niihin pitäisi laittaa? keffeine sanoo vain "Can't bind info socket!!!" auttakaa joku pikkusen. =)
tai onko parempia ohjelmia kuin keffeine?
olen asentanut myöskin uusimmat v4l ajurit.
toivottavasti löytyy jokin ratkaisu niin tikku pääsee käyttöön
308
Asentaminen ja käyttöönotto / Vs: näppäimistö ongelma
« : 06.08.08 - klo:16.34 »
itselläni on toisella koneella vanhempi ubuntu ja siinä kyllä onnistuu alt+ctrl+2, noh pitää sitten tottua tähän toiseen näppäimeen..
309
Laitealue / G15 näppäimistön lcd-näyttö
« : 06.08.08 - klo:00.28 »
pitäisi saada kuvaa tuohon näppäimistön lcd näyttöön, mitä pitäisi tehdä?
310
Asentaminen ja käyttöönotto / Vs: näppäimistö ongelma
« : 05.08.08 - klo:23.43 »Nyt on pakko kysyä, että mikä se toinen tapa on?
[/quote]
ainakin windowssilla olen aina painanut ctrl + alt + 2
ps. en saanut toimimaan sitä tuolta asetuksista.
311
Asentaminen ja käyttöönotto / Vs: näppäimistö ongelma
« : 05.08.08 - klo:21.47 »
en ole osannut vaihtaa tuolta mitään? mitä pitäisi vaihdella?
312
Asentaminen ja käyttöönotto / Vs: näppäimistö ongelma
« : 05.08.08 - klo:20.49 »
juu se toimii, mutta olisi kiva saada toimimaan tuo toinenkin kun siihen tottunut
313
Asentaminen ja käyttöönotto / näppäimistö ongelma
« : 05.08.08 - klo:20.37 »
elikkä asensin juuri ubuntu 8.04 ja huomasin että "@" merkki ei toimi, näppäimistönä minulla on logitechin G15 ja koitin toisella näppäimistölläkin mutta ei toiminut, mitä pitäisi tehdä?
314
Asentaminen ja käyttöönotto / Ubuntun asennus vistan viereen.
« : 05.08.08 - klo:14.47 »
Elikkä minulla on compaQ paketti kone ja tietysti siinä vista valmiina. toisella koneella omistan jo ubuntun 8.04 mutta haluaisin sen tähän nopeammalle koneelle, yritin jo kerran asentaa ubuntua mutta vista lakkasia toimimasta ja jouduin palauttamaan tehdasasetukset.
olisiko neuvoja mitä kannattaisi tehdä? osioida kiintolevyltä ubuntulle osa?
toivottavasti joku jaksaa auttaa minua
olisiko neuvoja mitä kannattaisi tehdä? osioida kiintolevyltä ubuntulle osa?
toivottavasti joku jaksaa auttaa minua
315
Asentaminen ja käyttöönotto / Tehdas asennettu vista & ubuntu
« : 24.07.08 - klo:19.16 »
Elikkä minulla on pakettikone ja siinä on valmiiksi asennettu vista, pystynkö asentamaan ubuntun toiseksi käyttöjärjestelmäksi? koitin kerran mutta vista sekosi ja jouduin palauttamaan vistan ja kaikki tiedostot menivät, olisiko neuvoja tai ohjeita? vai onko mahdoton tehtävä?
