Näytä kirjoitukset

Tässä osiossa voit tarkastella kaikkia tämän jäsenen viestejä. Huomaa, että näet viestit vain niiltä alueilta, joihin sinulla on pääsy.


Viestit - Eeriikki

Sivuja: 1 2 3 [4] 5 6 ... 41
61
Kävin laittamassa "Ohjelmalähteisiin" oletusasetukset, koska Ruotsin serverit herjas samalla lailla kuin nämä oletukset.
Tässä kuva.

62
Mitä tehdä kun perinteinen "sudo apt update" herjaa ?

sudo apt update && sudo apt full-upgrade
[sudo] erkki-käyttäjän salasana:           
Siv:1 http://cdn.dyn.com/dynupdater/debian stable/ InRelease
Nouda:2 http://cdn.dyn.com/dynupdater/debian stable/ Release [1 481 B]         
Löytyi:3 http://security.ubuntu.com/ubuntu jammy-security InRelease           
Nouda:4 http://cdn.dyn.com/dynupdater/debian stable/ Release.gpg [327 B]       
Löytyi:5 http://no.archive.ubuntu.com/ubuntu jammy InRelease                   
Löytyi:6 https://linux.teamviewer.com/deb stable InRelease                     
Löytyi:7 http://no.archive.ubuntu.com/ubuntu jammy-updates InRelease
Siv:4 http://cdn.dyn.com/dynupdater/debian stable/ Release.gpg
Siv:8 https://ftp.acc.umu.se/mirror/linuxmint.com/packages vera InRelease
Löytyi:9 http://no.archive.ubuntu.com/ubuntu jammy-backports InRelease
Löytyi:10 https://ftp.acc.umu.se/mirror/linuxmint.com/packages vera Release
Luetaan pakettiluetteloita... Valmis
W: GPG error: http://cdn.dyn.com/dynupdater/debian stable/ Release: Detached signature file '/var/lib/apt/lists/partial/cdn.dyn.com_dynupdater_debian_stable_Release.gpg' is in unsupported binary format
E: The repository 'http://cdn.dyn.com/dynupdater/debian stable/ Release' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.

63
Käynnistettävät sovellukset : Sieltä Redshift editoinnissa 4000:2000.

64
"snap-store --quit && sudo snap refresh" ei anna mitään, mutta

"sudo snap refresh snap-store"

[sudo] erkki-käyttäjän salasana:
virhe: cannot communicate with server: Post "http://localhost/v2/snaps/snap-store": dial unix /run/snapd.socket: connect: connection refused

erkki@Eerikki-HP6570b-U:~$ killall snap-store
snap-store: ei prosesseja

erkki@Eerikki-HP6570b-U:~$ sudo snap refresh snap-store
[sudo] erkki-käyttäjän salasana:
virhe: cannot communicate with server: Post "http://localhost/v2/snaps/snap-store": dial unix /run/snapd.socket: connect: connection refused

Näkyy muillakin olevan ongelmia:
https://discourse.ubuntu.com/t/how-to-close-the-snap-store-to-allow-snapd-to-update-it/30627

65
Ubuntun päivitys jää päälle hieromaan "snap-sovelluksia" ? Kuva 1.
Se pitää lopettaa "x".
Sen jälkeen tulee "Pakota lopetus". Kuva 2.
Tämän "ongelma" on ollut jo jonkin aikaa.

Sit lisäksi joskus tulee "Päivitä Ubuntuun 22.10", mutta ohjelma nököttää jonkun aikaa päällä, kunne "häviää" ?

66
Kyllä olen käynnistänyt uudelleen.
Vai pitääkö koittaa jotain Safe Mode käynnistyst ?

67
$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/nvme0n1p2 during installation
UUID=04a64fa3-7793-4d72-892a-a9cff1e483ce /               ext4    noatime,errors=remount-ro 0       1
# /boot/efi was on /dev/nvme0n1p1 during installation
#UUID=DF01-1F85  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0
/dev/disk/by-id/usb-ASMT_USB_3.2_Device_0000000007F9-0:0 /mnt/usb-ASMT_USB_3.2_Device_0000000007F9-0:0 auto nosuid,nodev,nofail 0 0
/dev/disk/by-id/usb-ASMT_USB_3.2_Device_0000000007F9-0:0-part1 /mnt/usb-ASMT_USB_3.2_Device_0000000007F9-0:0-part1 auto nosuid,nodev,nofail 0 0
erkki@Ensioot-HP-6570b:~$ sudo blkid
[sudo] erkki-käyttäjän salasana:           
/dev/sda2: UUID="04a64fa3-7793-4d72-892a-a9cff1e483ce" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="Linux filesystem" PARTUUID="e2412d15-45a0-4164-8f58-c0d3046acbc6"
/dev/loop1: TYPE="squashfs"
/dev/loop19: TYPE="squashfs"
/dev/loop27: TYPE="squashfs"
/dev/loop17: TYPE="squashfs"
/dev/loop8: TYPE="squashfs"
/dev/loop25: TYPE="squashfs"
/dev/loop15: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop23: TYPE="squashfs"
/dev/loop13: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop21: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop0: TYPE="squashfs"
/dev/loop28: TYPE="squashfs"
/dev/loop18: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop26: TYPE="squashfs"
/dev/loop16: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/loop24: TYPE="squashfs"
/dev/sda1: PTUUID="85671cc0-a0f2-4c1a-971c-8993f9e90f72" PTTYPE="gpt" PARTLABEL="fat32 /boot/efi" PARTUUID="fd9c3480-78d5-45e4-b199-aec4466dee00"
/dev/loop14: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop22: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop20: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"

68
Tuhannet kiitokset.
Tilino : jurkkie@gmail.com


 sudo apt autoremove

Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu... Valmis
Luetaan tilatiedot... Valmis                 
0 päivitetty, 0 uutta asennusta, 0 poistettavaa ja 0 päivittämätöntä.
erkki@Ensioot-HP-6570b:~$

Tässä Gparted, mutta miksi en pysty liittämään ?

69
Ei tullut vielä kuntoon ?

sudo parted -l
[sudo] erkki-käyttäjän salasana:           
Model: ATA Samsung SSD 860 (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number  Start   End    Size   File system  Name                  Flags
 1      1049kB  538MB  537MB  fat32        Microsoft basic data  msftdata
 2      538MB   250GB  250GB  ext4         Linux filesystem

70
Tässä tulee "w":n jälkeen:

Mitä seuraavaksi. En osaa tehdä tota ohjetta. Teenkö buuttauksen.

 sudo gdisk /dev/sda1
[sudo] erkki-käyttäjän salasana:           
GPT fdisk (gdisk) version 1.0.8

Caution: invalid main GPT header, but valid backup; regenerating main header
from backup!

Warning: Invalid CRC on main header data; loaded backup partition table.
Warning! Main and backup partition tables differ! Use the 'c' and 'e' options
on the recovery & transformation menu to examine the two tables.

Warning! Main partition table CRC mismatch! Loaded backup partition table
instead of main partition table!

Warning! One or more CRCs don't match. You should repair the disk!
Main header: ERROR
Backup header: OK
Main partition table: ERROR
Backup partition table: OK

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: damaged

****************************************************************************
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
****************************************************************************

Command (? for help): w

Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!

Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/sda1.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.

erkki@Ensioot-HP-6570b:~$

71
Äskön phuin höpöjä. Tässä sda1:

 sudo gdisk /dev/sda1
[sudo] erkki-käyttäjän salasana:           
GPT fdisk (gdisk) version 1.0.8

Caution: invalid main GPT header, but valid backup; regenerating main header
from backup!

Warning: Invalid CRC on main header data; loaded backup partition table.
Warning! Main and backup partition tables differ! Use the 'c' and 'e' options
on the recovery & transformation menu to examine the two tables.

Warning! Main partition table CRC mismatch! Loaded backup partition table
instead of main partition table!

Warning! One or more CRCs don't match. You should repair the disk!
Main header: ERROR
Backup header: OK
Main partition table: ERROR
Backup partition table: OK

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: damaged

****************************************************************************
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.

72
Joo samat virheet. Koitan ajaa uudestaan.
Tuo Boot Repair on aiemminkin ollut minulle ongelma. Koskaan siitä ei ole ollut apuja.

 sudo gdisk /dev/sda
GPT fdisk (gdisk) version 1.0.8

Partition table scan:
  MBR: MBR only
  BSD: not present
  APM: not present
  GPT: not present

***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format
in memory. THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by
typing 'q' if you don't want to convert your MBR partitions
to GPT format!
***************************************************************
Command (? for help):

73
Löytyykö tästä tietä eteenpäin ?

~$ sudo gdisk /dev/sda1
[sudo] erkki-käyttäjän salasana:           
GPT fdisk (gdisk) version 1.0.8

Caution: invalid main GPT header, but valid backup; regenerating main header
from backup!

Warning: Invalid CRC on main header data; loaded backup partition table.
Warning! Main and backup partition tables differ! Use the 'c' and 'e' options
on the recovery & transformation menu to examine the two tables.

Warning! Main partition table CRC mismatch! Loaded backup partition table
instead of main partition table!

Warning! One or more CRCs don't match. You should repair the disk!
Main header: ERROR
Backup header: OK
Main partition table: ERROR
Backup partition table: OK

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: damaged

****************************************************************************
Caution: Found protective or hybrid MBR and corrupt GPT. Using GPT, but disk
verification and recovery are STRONGLY recommended.
****************************************************************************

74
Se on nyt tässä tilassa:

75
Joo, kloonattu SSD on samanlainen.

Jos teen pelkästään linkin mukaisen homman, niin jääkö Mint ehjäksi. Voin kopioida tiedostoni toiselta Mintiltäni ?

https://recoverit.wondershare.com/partition-tips/convert-mbr-to-gpt-linux.html

Seuraava osio ei taida minun taidoillani onnistua !

"Lisää myös tarvittavat liput EFI-osiolle GPartedilla. Operaatio tehdään Ubuntun asennustikun livetilassa."

76
Joo, olet varmaan oikeassa, että nyt on jossakin, TL6400, jokin suojaus jota en osaa löytää.

Firmis on ajan tasalla.

Tuossa on TL-Link osoite. Enkä pääse siihen sisälle. En ole varma miten se pitäisi tehdä ?

Tuo 9000 on kameran portti.

~$ nmap 188.67.166.230 -Pn
Starting Nmap 7.80 ( https://nmap.org ) at 2023-04-17 20:37 EEST
Nmap scan report for 188-67-166-230.bb.dnainternet.fi (188.67.166.230)
Host is up (0.011s latency).
Not shown: 995 closed ports
PORT     STATE SERVICE
22/tcp   open  ssh
23/tcp   open  telnet
80/tcp   open  http
1900/tcp open  upnp
9000/tcp open  cslistener

77
$ sudo parted -l
[sudo] erkki-käyttäjän salasana:           
Antoi seuraavaa:

Model: ATA Samsung SSD 860 (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End    Size   Type     File system  Flags
 1      1049kB  538MB  537MB  primary  fat32
 2      538MB   250GB  250GB  primary  ext4

78
erkki@Eeriikki-HP-6570b-V:~$ sudo apt autoremove

Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu... Valmis
Luetaan tilatiedot... Valmis                 
Seuraavat paketit POISTETAAN:
  linux-headers-5.15.0-60 linux-headers-5.15.0-60-generic
  linux-image-5.15.0-60-generic linux-modules-5.15.0-60-generic
  linux-modules-extra-5.15.0-60-generic
0 päivitetty, 0 uutta asennusta, 5 poistettavaa ja 0 päivittämätöntä.
2 ei asennettu kokonaan tai poistettiin.
Toiminnon jälkeen vapautuu 585 M t levytilaa.
Haluatko jatkaa? [K/e] k
(Luetaan tietokantaa... 512186 tiedostoa ja hakemistoa asennettu tällä hetkellä.)
Poistetaan linux-headers-5.15.0-60-generic (5.15.0-60.66)...
Poistetaan linux-headers-5.15.0-60 (5.15.0-60.66)...
Poistetaan linux-modules-extra-5.15.0-60-generic (5.15.0-60.66)...
Poistetaan linux-image-5.15.0-60-generic (5.15.0-60.66)...
/etc/kernel/prerm.d/dkms:
dkms: removing: rtl8821ce 5.5.2.1 (5.15.0-60-generic) (x86_64)
grep: /lib/modules/5.15.0-60-generic/build/.config: Tiedostoa tai hakemistoa ei
ole
Module rtl8821ce-5.5.2.1 for kernel 5.15.0-60-generic (x86_64).
Before uninstall, this module version was ACTIVE on this kernel.

rtl8821ce.ko:
 - Uninstallation
   - Deleting from: /lib/modules/5.15.0-60-generic/updates/dkms/
 - Original module
   - No original module was found for this module on this kernel.
   - Use the dkms install command to reinstall any previous module version.

/etc/modprobe.d/dkms.conf: removed 'blacklist rtw88_8821ce'
depmod...
/etc/kernel/postrm.d/initramfs-tools:
update-initramfs: Deleting /boot/initrd.img-5.15.0-60-generic
/etc/kernel/postrm.d/zz-update-grub:
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/50_linuxmint.cfg'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-5.15.0-69-generic
Found initrd image: /boot/initrd.img-5.15.0-69-generic
Found linux image: /boot/vmlinuz-5.15.0-67-generic
Found initrd image: /boot/initrd.img-5.15.0-67-generic
Found linux image: /boot/vmlinuz-5.15.0-39-generic
Found initrd image: /boot/initrd.img-5.15.0-39-generic
Warning: os-prober will be executed to detect other bootable partitions.
Its output will be used to detect bootable binaries on them and create new boot
entries.
Adding boot menu entry for UEFI Firmware Settings ...
done
Poistetaan linux-modules-5.15.0-60-generic (5.15.0-60.66)...
Tehdään asetuksia: grub-efi-amd64-signed (1.187.3~22.04.1+2.06-2ubuntu14.1) ...
mount: /var/lib/grub/esp: erikoislaite /dev/disk/by-id/nvme-eui.e8238fa6bf530001
001b448b48d3b09f-part1 ei ole olemassa.
dpkg: error processing package grub-efi-amd64-signed (--configure):
 installed grub-efi-amd64-signed package post-installation script subprocess ret
urned error exit status 32
dpkg: dependency problems prevent configuration of shim-signed:
 shim-signed riippuu paketista grub-efi-amd64-signed (>= 1.187.2~) | grub-efi-ar
m64-signed (>= 1.187.2~); kuitenkin:
  Paketille grub-efi-amd64-signed ei ole tehty vielä asetuksia.
  Pakettia grub-efi-arm64-signed ei ole asennettu.

dpkg: error processing package shim-signed (--configure):
 riippuvuusongelmia - jätetään asetukset säätämättä
Käsittelyssä tapahtui liian monta virhettä:
 grub-efi-amd64-signed
 shim-signed
E: Sub-process /usr/bin/dpkg returned an error code (1)

79
Tällainen vastaus :

$ sudo apt-get install -f
[sudo] erkki-käyttäjän salasana:           
Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu... Valmis
Luetaan tilatiedot... Valmis                 
Seuraavat paketit on alun perin asennettu automaattisesti, eikä niitä enää tarvita:
  linux-headers-5.15.0-60 linux-headers-5.15.0-60-generic linux-image-5.15.0-60-generic linux-modules-5.15.0-60-generic linux-modules-extra-5.15.0-60-generic
Suorita 'sudo apt autoremove' poistaaksesi ne.
0 päivitetty, 0 uutta asennusta, 0 poistettavaa ja 0 päivittämätöntä.
2 ei asennettu kokonaan tai poistettiin.
Toiminnon jälkeen käytetään 0  t lisää levytilaa.
Tehdään asetuksia: grub-efi-amd64-signed (1.187.3~22.04.1+2.06-2ubuntu14.1) ...
mount: /var/lib/grub/esp: erikoislaite /dev/disk/by-id/nvme-eui.e8238fa6bf530001001b448b48d3b09f-part1 ei ole olemassa.
dpkg: error processing package grub-efi-amd64-signed (--configure):
 installed grub-efi-amd64-signed package post-installation script subprocess returned error exit status 32
dpkg: dependency problems prevent configuration of shim-signed:
 shim-signed riippuu paketista grub-efi-amd64-signed (>= 1.187.2~) | grub-efi-arm64-signed (>= 1.187.2~); kuitenkin:
  Paketille grub-efi-amd64-signed ei ole tehty vielä asetuksia.
  Pakettia grub-efi-arm64-signed ei ole asennettu.

dpkg: error processing package shim-signed (--configure):
 riippuvuusongelmia - jätetään asetukset säätämättä
Käsittelyssä tapahtui liian monta virhettä:
 grub-efi-amd64-signed
 shim-signed
E: Sub-process /usr/bin/dpkg returned an error code (1)

80
Pikku hiljaa mennään eteenpäin.
Nyt on jo sama IP molempiin suuntiin ryhmässä 37.x.x.x.
Tämä johtui DNA:n APN:n muuttumisesta !!!!

SE oli minulla "Internet" ja se piti muuttaa " APN = julkinen.dna.fi!
- PDP type : IPv4 & IPv6
- APN type : Static ; En tiedä onko tämä oikein vai pitääkö olla Dynamic.
- Authentication Type : NONE

Mutta ajataelkaa 2 vuotta toimi edellisillä asetuksilla ja Puff viime maanantaina noin klo 12:xx STOP !

Vielä ei onnistu Dyndns Authentication ! Enkä pääse vielä ulkoverkosta  kameraan.
Reolinkin Applikaation Pilvipalvelu toimii eli Android kännykkä. Siinä pääsen kameraan.

Mutta vielä pitää vääntää.

Sivuja: 1 2 3 [4] 5 6 ... 41