En tiedä mitä tein, mutta uudelleen käynnistyksen yhteydessä löytyi sillä hetkellä kytketyt USB laitteet. Miksi tuntuu, että näin ei tapahdu joka kerta?
[ 1.051561] PPP generic driver version 2.4.2
[ 1.051604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.051608] ehci-pci: EHCI PCI platform driver
[ 1.051758] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.051765] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.055671] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.055698] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc061c000
[ 1.067273] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.067328] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.067331] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.067333] usb usb1: Product: EHCI Host Controller
[ 1.067335] usb usb1: Manufacturer: Linux 3.13.0-43-generic ehci_hcd
[ 1.067337] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.067529] hub 1-0:1.0: USB hub found
[ 1.067537] hub 1-0:1.0: 2 ports detected
[ 1.067706] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.067864] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.067953] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.067977] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
[ 1.068044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.068046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.068049] usb usb2: Product: xHCI Host Controller
[ 1.068051] usb usb2: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 1.068053] usb usb2: SerialNumber: 0000:00:14.0
[ 1.068325] hub 2-0:1.0: USB hub found
[ 1.068339] hub 2-0:1.0: 8 ports detected
[ 1.070898] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.070905] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.070947] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.070950] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.070952] usb usb3: Product: xHCI Host Controller
[ 1.070954] usb usb3: Manufacturer: Linux 3.13.0-43-generic xhci_hcd
[ 1.070956] usb usb3: SerialNumber: 0000:00:14.0
[ 1.071091] hub 3-0:1.0: USB hub found
[ 1.071101] hub 3-0:1.0: 4 ports detected
[ 1.221231] ata1: SATA max UDMA/133 abar m2048@0xc061b000 port 0xc061b100 irq 60
[ 1.221234] ata2: SATA max UDMA/133 abar m2048@0xc061b000 port 0xc061b180 irq 60
[ 1.379320] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.511593] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.511599] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.511995] hub 1-1:1.0: USB hub found
[ 1.512041] hub 1-1:1.0: 8 ports detected
[ 1.679278] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[ 1.695662] usb 2-4: New USB device found, idVendor=0bda, idProduct=0129
[ 1.695667] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.695670] usb 2-4: Product: USB2.0-CRW
[ 1.695672] usb 2-4: Manufacturer: Generic
[ 1.695675] usb 2-4: SerialNumber: 20100201396000000
[ 1.719223] tsc: Refined TSC clocksource calibration: 1396.766 MHz
[ 1.863275] usb 2-6: new high-speed USB device number 3 using xhci_hcd
[ 1.879206] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.883196] ata2.00: ATAPI: TSSTcorp CDDVDW SU-228FB, LU01, max UDMA/100
[ 1.888153] ata2.00: configured for UDMA/100
[ 1.895997] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SU-228FB LU01 PQ: 0 ANSI: 5
[ 1.898649] usb 2-6: New USB device found, idVendor=174f, idProduct=14b2
[ 1.898655] usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.898658] usb 2-6: Product: Lenovo EasyCamera
[ 1.898661] usb 2-6: Manufacturer: Generic
[ 1.898663] usb 2-6: SerialNumber: 200901010001
[ 1.907142] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.907148] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.907292] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.907355] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.081175] init: plymouth-upstart-bridge main process (185) terminated with status 1
[ 2.081189] init: plymouth-upstart-bridge main process ended, respawning
[ 2.084925] usb 2-7: New USB device found, idVendor=0cf3, idProduct=3004
[ 2.084931] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.225890] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x2a800, board id: 2848, fw id: 1581875
[ 2.890873] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.890877] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 2.890881] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 2.890885] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.890886] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 2.890890] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 2.890893] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
[ 2.890896] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.890898] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.015210] Bluetooth: Core ver 2.17
[ 3.015550] NET: Registered protocol family 31
[ 3.015554] Bluetooth: HCI device and connection manager initialized
[ 3.015563] Bluetooth: HCI socket layer initialized
[ 3.015566] Bluetooth: L2CAP socket layer initialized
[ 3.015572] Bluetooth: SCO socket layer initialized
[ 3.061260] usbcore: registered new interface driver btusb
[ 3.092429] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.092430] Bluetooth: BNEP filters: protocol multicast
[ 3.092438] Bluetooth: BNEP socket layer initialized
[ 3.100322] random: nonblocking pool is initialized
comm="apparmor_parser"
[ 3.111089] Bluetooth: RFCOMM TTY layer initialized
[ 3.111101] Bluetooth: RFCOMM socket layer initialized
[ 3.111108] Bluetooth: RFCOMM ver 1.11
[ 3.122745] Linux video capture interface: v2.00
[ 3.211133] usb 2-7: USB disconnect, device number 4
[ 3.490881] scsi2 : SCSI emulation for RTS5139 USB card reader
[ 3.491401] scsi 2:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 3.492126] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.499876] usbcore: registered new interface driver rts5139
[ 3.558885] usb 2-7: new full-speed USB device number 5 using xhci_hcd
[ 3.559072] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 3.623903] [drm] Memory usable by graphics device = 2048M
[ 3.623909] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 3.623912] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 3.682983] ath: EEPROM indicates we should expect a direct regpair map
[ 3.682986] ath: Country alpha2 being used: 00
[ 3.682987] ath: Regpair used: 0x6a
[ 3.826929] i915 0000:00:02.0: irq 62 for MSI/MSI-X
[ 3.826944] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.826946] [drm] Driver supports precise vblank timestamp query.
[ 3.827034] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.918829] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.125635] init: failsafe main process (605) killed by TERM signal
[ 4.127277] init: samba-ad-dc main process (649) terminated with status 1
[ 4.131738] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90011d00000, irq=19
[
[ 4.351821] fbcon: inteldrmfb (fb0) is primary device
[ 4.592792] r8169 0000:01:00.0 eth0: link down
[ 4.592847] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.593367] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.596052] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.818616] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.982569] Console: switching to colour frame buffer device 170x48
[ 5.986581] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.986583] i915 0000:00:02.0: registered panic notifier
[ 6.024305] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.024822] acpi device:4a: registered as cooling_device3
[ 6.024918] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.026613] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.026988] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
[ 6.045864] HDA driver get symbol successfully from i915 module
[ 6.050533] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
[ 6.076670] hda_codec: CX20751/2: BIOS auto-probing.
[ 6.076892] autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 6.076894] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.076896] hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 6.076897] mono: mono_out=0x0
[ 6.076899] inputs:
[ 6.076901] Internal Mic=0x1a
[ 6.076902] Mic=0x19
[ 6.077572] hda_codec: Enable sync_write for stable communication
[ 6.081374] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 6.081458] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 6.081518] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 6.082364] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 6.083759] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 6.796126] audit_printk_skb: 159 callbacks suppressed
[ 6.796130] type=1400 audit(1419061818.184:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1140 comm="apparmor_parser"
[ 6.899718] init: gdm main process (972) killed by TERM signal
[ 7.034611] init: plymouth-upstart-bridge main process ended, respawning
[ 7.052232] init: plymouth-upstart-bridge main process ended, respawning
[ 8.558058] xhci_hcd 0000:00:14.0: Timeout while waiting for address device command
[ 8.558077] ------------[ cut here ]------------
[ 8.558086] WARNING: CPU: 1 PID: 41 at /build/buildd/linux-3.13.0/drivers/usb/host/xhci-ring.c:1582 handle_cmd_completion+0xe46/0xe50()
[ 8.558088] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_conexant intel_rapl snd_hda_intel snd_hda_codec x86_pkg_temp_thermal intel_powerclamp snd_hwdep coretemp arc4 snd_pcm kvm_intel kvm snd_page_alloc ath9k snd_seq_midi snd_seq_midi_event crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_rawmidi cryptd ath9k_common i915 rts5139(C) ath9k_hw uvcvideo joydev snd_seq ath videobuf2_vmalloc videobuf2_memops mac80211 serio_raw videobuf2_core videodev ath3k bnep rfcomm snd_seq_device drm_kms_helper btusb bluetooth snd_timer lpc_ich snd cfg80211 mei_me mei soundcore drm i2c_algo_bit binfmt_misc ideapad_laptop sparse_keymap video parport_pc mac_hid ppdev lp parport psmouse ahci libahci r8169 mii
[ 8.558144] CPU: 1 PID: 41 Comm: khubd Tainted: G C 3.13.0-43-generic #72-Ubuntu
[ 8.558146] Hardware name: LENOVO 20354/Lancer 5A5, BIOS 9BCN25WW 04/10/2014
[ 8.558147] 0000000000000009 ffff88024f243da8 ffffffff81720bf6 0000000000000000
[ 8.558152] ffff88024f243de0 ffffffff810677cd ffff88023f8da560 ffff88023f8da110
[ 8.558155] 0000000000000004 000000023f8da110 ffff880243616000 ffff88024f243df0
[ 8.558159] Call Trace:
[ 8.558160] <IRQ> [<ffffffff81720bf6>] dump_stack+0x45/0x56
[ 8.558170] [<ffffffff810677cd>] warn_slowpath_common+0x7d/0xa0
[ 8.558173] [<ffffffff810678aa>] warn_slowpath_null+0x1a/0x20
[ 8.558179] [<ffffffff8157db56>] handle_cmd_completion+0xe46/0xe50
[ 8.558182] [<ffffffff8157f493>] xhci_irq+0x333/0xa60
[ 8.558188] [<ffffffff810a7b55>] ? rebalance_domains+0x155/0x250
[ 8.558191] [<ffffffff8157fbd1>] xhci_msi_irq+0x11/0x20
[ 8.558195] [<ffffffff810bfa5e>] handle_irq_event_percpu+0x3e/0x1d0
[ 8.558199] [<ffffffff810bfc2d>] handle_irq_event+0x3d/0x60
[ 8.558202] [<ffffffff810c26b7>] handle_edge_irq+0x77/0x130
[ 8.558208] [<ffffffff81015e5e>] handle_irq+0x1e/0x30
[ 8.558212] [<ffffffff817339dd>] do_IRQ+0x4d/0xc0
[ 8.558217] [<ffffffff817290ed>] common_interrupt+0x6d/0x6d
[ 8.558218] <EOI> [<ffffffff814937ae>] ? dev_printk_emit+0x3e/0x40
[ 8.558227] [<ffffffff8157ad06>] ? xhci_cancel_cmd+0x86/0x270
[ 8.558231] [<ffffffff81728a8b>] ? _raw_spin_unlock_irqrestore+0x1b/0x40
[ 8.558235] [<ffffffff8157acd9>] xhci_cancel_cmd+0x59/0x270
[ 8.558239] [<ffffffff81574803>] xhci_address_device+0x413/0x620
[ 8.558244] [<ffffffff8153ec54>] hub_port_init+0x1f4/0xb10
[ 8.558249] [<ffffffff814a48f9>] ? update_autosuspend+0x39/0x60
[ 8.558253] [<ffffffff814a4965>] ? pm_runtime_set_autosuspend_delay+0x45/0x90
[ 8.558258] [<ffffffff815403d5>] hub_port_connect_change+0x185/0xb50
[ 8.558261] [<ffffffff81547744>] ? usb_control_msg+0xd4/0x110
[ 8.558265] [<ffffffff81541274>] hub_events+0x4d4/0xa30
[ 8.558269] [<ffffffff81541805>] hub_thread+0x35/0x160
[ 8.558275] [<ffffffff810ab0b0>] ? prepare_to_wait_event+0x100/0x100
[ 8.558279] [<ffffffff815417d0>] ? hub_events+0xa30/0xa30
[ 8.558283] [<ffffffff8108b572>] kthread+0xd2/0xf0
[ 8.558286] [<ffffffff8108b4a0>] ? kthread_create_on_node+0x1c0/0x1c0
[ 8.558290] [<ffffffff817315fc>] ret_from_fork+0x7c/0xb0
[ 8.558293] [<ffffffff8108b4a0>] ? kthread_create_on_node+0x1c0/0x1c0
[ 8.558295] ---[ end trace 58b71fb79357326e ]---
[ 8.762129] usb 2-7: Device not responding to set address.
[ 8.965986] usb 2-7: device not accepting address 5, error -71
[ 9.078067] usb 2-7: new full-speed USB device number 6 using xhci_hcd
[ 9.095721] usb 2-7: New USB device found, idVendor=0cf3, idProduct=3004
[ 9.095727] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.373894] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[ 9.373900] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
[ 9.373924] xhci_hcd 0000:00:14.0: HC died; cleaning up
[ 9.374067] usb 2-4: USB disconnect, device number 2
[ 9.378933] systemd-udevd[320]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
[ 9.382820] init: anacron main process (969) killed by TERM signal
[ 9.623761] usb 2-6: USB disconnect, device number 3
[ 9.646350] usb 2-7: USB disconnect, device number 6
[ 9.655912] systemd-udevd[320]: inotify_add_watch(6, /dev/sdb, 10) failed: No
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x24f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xa56affff]
[ 0.000000] node 0: [mem 0xa5eb0000-0xaaabefff]
[ 0.000000] node 0: [mem 0xaafff000-0xaaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x24f5fffff]
[ 0.000000] On node 0 totalpages: 2070620
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10827 pages used for memmap
[ 0.000000] DMA32 zone: 692928 pages, LIFO batch:31
[ 0.000000] Normal zone: 21464 pages used for memmap
[ 0.000000] Normal zone: 1373696 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88024f200000 s82304 r8192 d24192 u262144
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038244
[ 0.006394] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.007921] ACPI: Core revision 20131115
[ 0.024888] ACPI: All ACPI Tables successfully acquired
[ 0.026444] ftrace: allocating 28552 entries in 112 pages
[ 0.046161] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.085842] smpboot: CPU0: Intel(R) Celeron(R) 2957U @ 1.40GHz (fam: 06, model: 45, stepping: 01)
[ 0.151961] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.164038] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.165257] ACPI: SSDT 00000000aae88c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.203242] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.210897] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.210903] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff]
[ 0.210928] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.212686] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.212751] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.212813] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.212873] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.212932] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.212992] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.213051] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.213111] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.213745] ACPI: Enabled 4 GPEs in block 00 to 7F
Lisätty "koodit" tekstiin, tulevaisuudessa lisää vastaavat litaniat itse koodiin. Koodi löytyy yäreunasta #-merkistä, niiden käyttöä voi opetella Testaus-alueella vapaasti. -Storck
Näytä kirjoitukset
