Näytä kirjoitukset

Tässä osiossa voit tarkastella kaikkia tämän jäsenen viestejä. Huomaa, että näet viestit vain niiltä alueilta, joihin sinulla on pääsy.


Aiheet - jukih

Sivuja: [1]
1
Hei,

päivitin edellisen version Kubuntu työpöydästä verkkoupdatella 11.04:ksi.
Päivtys meni kohtuullisesti läpi mutta configure antaa virheitä tyyliin:

Koodia: [Valitse]
sudo dpkg --configure -a
[sudo] password for jukih:
Setting up initramfs-tools (0.98.8ubuntu3) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.38-8-generic

gzip: stdout: No space left on device
E: mkinitramfs failure cpio 141 gzip 1
update-initramfs: failed for /boot/initrd.img-2.6.38-8-generic
dpkg: error processing initramfs-tools (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 initramfs-tools

Joissakin erillisisä applikaatioiden asennuksessa huomaan myös ilmoituksia puuttuvasta tilasta.
Se hämmästyttää, koska rootissa on vapaata 9 GB ja home-osiossa vielä enemmän.
Ihmettelen.

2
Moi,
p'ivitin t't' versiota 10.4 ja siell' tuli kysymys minne kaikkialle grub asennetaan. No vastasin ensimm'iselle kovalevylle ja my;s sen ensimm'iselle osiolle. Asennus kertoi, ett' j'lkimm'inen on kovin huono idea (BAD idea) mutta teki sen ennenkuin ehdin est''. Nyt ei sitten k'ynnisty wintoosa (eik' oikein linuxkaan).

Ilmeisesti win ei vaurioitunut pahasti mutta k'ynnistym''n ei suostu. Tiedostot kyll' ovat luettavissa Linuxilla.

Onko t'h'n helppoa korjausta. Windowsin uudelleenasennus on hankala koska koneen mukana tuli Vista ilman asennuslevykkeit' ja sen olen viel' p'ivitt'nyt win7ksi.

(pls ei kommentteja 'l' k'yt' wintoosaa / siihen on p'tev't syyns')
Sori, aakkoset hukassa kun kirjoitan livecdll'

3
Päivitin Kubuntu 9.04 -> 9.10. Päivitys meni läpi mutta pientä (tai oikeastaan suurtakin) häikkää esiintyy. Äänet ovat hävinneet eikä videot pyöri kunnolla. Ensimmäinen ongelma on, että grub-lataaja edelleen näyttää kerneliä 2.6.28 vaikka menossa pitäisi kai olla 2.6.31. Ohessa grubin menu.lst sisältöä:

Koodia: [Valitse]
splashimage (hd1,2)/grub/splashimages/77942-wolf.xpm.gz
default 6
timeout 5
color light-cyan/black blink-magenta/cyan
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
-----------------------snip snip--------------------
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-12-generic
kernel /vmlinuz-2.6.28-12-generic root=UUID=9526e30c-676d-497f-95ca-e48f008dcb6e ro quiet splash
initrd /initrd.img-2.6.28-12-generic
title Ubuntu 9.04, kernel 2.6.28-12-generic (recovery mode)
kernel /vmlinuz-2.6.28-12-generic root=UUID=9526e30c-676d-497f-95ca-e48f008dcb6e ro single
initrd /initrd.img-2.6.28-12-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
kernel /vmlinuz-2.6.28-11-generic root=UUID=9526e30c-676d-497f-95ca-e48f008dcb6e ro quiet splash
initrd /initrd.img-2.6.28-11-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
kernel /vmlinuz-2.6.28-11-generic root=UUID=9526e30c-676d-497f-95ca-e48f008dcb6e ro single
initrd /initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
kernel /memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST

Millähän taikatempulla saisin oikean kernelin mukaan. Se ehkä auttaisi joihinkin ongelmiin (?)
Luultavasti helppoa mutten nyt vain osaa.

4
Viimeisimmän kernel päivityksen yhteydessä tätä uusinta ydintä ei ilmestynytkään grub valikkoon.
Poistin koko menu.lst :n ja ajoin
Koodia: [Valitse]
sudo grub-update(tai jotain sinnepäin. Siitä tuli jotain onnistumisilmoituksia mutta buutti johtikin virheeseen
"Error 11
unreckognized device string"

Yritin tuossa jo regeneroida grubin käyttäen supergrubin fix boot optiota mutta lopputulos on sama.

Mitään ehdotuksia neuvoja?? ???

PS: kone on tuplabuuttaava ja grubin Vista-osio toimii

5
On ollut noin pari kuukautta ongelma: Kubuntussa normaalioikeuksien krusader krässää aina aloitettaessa mutta jostain syystä root-mode toimii. Pärjään kyllä muilla managereilla (Dolphin) mutta pitäisin Krusaderista enemmän. En kuitenkaan haluaisi koko ajan kruisailla roottina.

Olen poistanut paketin ja reinstalloinut. Odottelin myös josko 9.04 ratkaisi ongelmani itsestään muttei näinkään käynyt.

Onko mitään vinkkejä mitä kannattaisi tehdä? Perusgooglauksella en löytänyt vastausta.

Yksi voisi tietysti olla radikaali uudelleen asennus mutta sitäkään en heti aluksi haluaisi tehdä.

6
Laitealue / Hävitetyt partitioinnit [RATKAISTU]
« : 09.02.08 - klo:22.40 »
Moi,

tein tyhmyyksiä: käytin gparted työkalua ja valitsin device valikosta set disklabel (kuvittelin sillä saavani partitiolle windows tyylisen labelin (osionimen)).
No - joka tapauksessa koko kovalevy (100 GB) oli tämän jälkeen yhtenä klimppinä ilman osion osiota .
Siellä oli ollut noin 4-5 osiota ennen.

Toistaiseksi en ole sille mitään kirjoittanut - Ubuntu-asennuksen olennaiset osat ovat toisella kovalevyllä.
Mutta siellä oli wintoosa-asennus (XP) joka olisi mukava jotenkin pelastaa (olennainen data on backupilla mutta lukuisat ohjelmistojen uudelleenasennukset ovat tosi työläät - luultavimmin viikkojen työ).

[edit: tähän pakollinen M$ - ubuntu kommentti: ubuntulla vastaava veisi enintään muutaman tunnin jos sitäkään]

Veikkaan että tähän on jokin suora keino mutta mikä se olisi?
Ehdotuksia?

7
Jatkan tässä keskustelua ongelmasta, jonka alunperin esitin tuolla kiitokset osiossa.

http://forum.ubuntu-fi.org/index.php?topic=8449.40

Lyhyesti: ongelmana on Kubuntun käynnistys viime kernelipäivityksen jälkeen (ei välttämättä siihen kuitenkaan liity?). Saan vain mustan ikkunan, josta kuitenkin olen palstaneuvojien avulla päässyt eteenpäin ctrl alt F1:llä. Antamalla komentokehotteeseen 'startx' käynnistyy X ja pääsen Gnome  graafiseen tilaan (jopa suuri resoluutio tuettuna).
Sisäänkirjautuessa (ennen startx:ää) tulee virheilmoitus
"configuration error - unkown item 'FAIL_DELAY' "

Olen yrittänyt myös apt-get update ja apt-get distro-upgrade komentoja, jotka sinänsä menevät läpi (ihan kaikkia varastoja ei taida löytyä mutta näin se on ollut jo kauan, en usko että tässä tilanne on muuttunut).
(Myös
sudo dpkg-reconfigure -phigh xserver-xorg
on kokeiltu.)

Näytönohjain on siis ATI radeon 9600 ja monitori EIZO Flexscan L557 (LCD näyttö).
Alla asiaan liittyen xorg.conf sisältö.

Yksi juttu vielä: sammutettaessa tulee jotain valituksia tuosta wacom-driverista.

Apuja, ehdotuksia?
======================
Koodia: [Valitse]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier     "Default Layout"
Screen      0  "aticonfig-Screen[0]" 0 0
InputDevice    "Generic Keyboard"
InputDevice    "Configured Mouse"
InputDevice    "stylus" "SendCoreEvents"
InputDevice    "cursor" "SendCoreEvents"
InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

# path to defoma fonts
FontPath     "/usr/share/X11/fonts/misc"
FontPath     "/usr/share/X11/fonts/cyrillic"
FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath     "/usr/share/X11/fonts/Type1"
FontPath     "/usr/share/X11/fonts/100dpi"
FontPath     "/usr/share/X11/fonts/75dpi"
FontPath     "/usr/share/fonts/X11/misc"
FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load  "bitmap"
Load  "ddc"
Load  "dri"
Load  "extmod"
Load  "freetype"
Load  "glx"
Load  "int10"
Load  "type1"
Load  "vbe"
EndSection

Section "ServerFlags"
Option     "AIGLX" "off"
EndSection

Section "InputDevice"
Identifier  "Generic Keyboard"
Driver      "kbd"
Option     "CoreKeyboard"
Option     "XkbRules" "xorg"
Option     "XkbModel" "pc104"
Option     "XkbLayout" "fi"
Option     "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier  "Configured Mouse"
Driver      "mouse"
Option     "CorePointer"
Option     "Device" "/dev/input/mice"
Option     "Protocol" "ExplorerPS/2"
Option     "ZAxisMapping" "4 5"
Option     "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
Identifier  "stylus"
Driver      "wacom"
Option     "Device" "/dev/wacom"          # Change to
Option     "Type" "stylus"
Option     "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
Identifier  "eraser"
Driver      "wacom"
Option     "Device" "/dev/wacom"          # Change to
Option     "Type" "eraser"
Option     "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
Identifier  "cursor"
Driver      "wacom"
Option     "Device" "/dev/wacom"          # Change to
Option     "Type" "cursor"
Option     "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier   "Generic Monitor"
HorizSync    30.0 - 65.0
VertRefresh  50.0 - 75.0
Option     "DPMS"
EndSection

Section "Monitor"
Identifier   "aticonfig-Monitor[0]"
Option     "VendorName" "ATI Proprietary Driver"
Option     "ModelName" "Generic Autodetecting Monitor"
Option     "DPMS" "true"
EndSection

Section "Device"
Identifier  "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Driver      "ati"
BusID       "PCI:1:0:0"
EndSection

Section "Device"
Identifier  "aticonfig-Device[0]"
Driver      "fglrx"
Option     "VideoOverlay" "on"
Option     "OpenGLOverlay" "off"
EndSection

Section "Screen"
Identifier "Default Screen"
Device     "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Monitor    "Generic Monitor"
DefaultDepth     24
SubSection "Display"
Depth     1
Modes    "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth     4
Modes    "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth     8
Modes    "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth     15
Modes    "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth     16
Modes    "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth     24
Modes    "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device     "aticonfig-Device[0]"
Monitor    "aticonfig-Monitor[0]"
DefaultDepth     24
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection

Section "DRI"
Mode         0666
EndSection

Section "Extensions"
Option     "Composite" "Disable"
EndSection


Sivuja: [1]