Näytä kirjoitukset

Tässä osiossa voit tarkastella kaikkia tämän jäsenen viestejä. Huomaa, että näet viestit vain niiltä alueilta, joihin sinulla on pääsy.


Viestit - tortillaheppu

Sivuja: [1]
1
Laitealue / Vs: [ratkaistu]Dna mokkula
« : 26.10.08 - klo:20.57 »
Ei näytä toimivan vieläkään, mutta mikä on DHCP ja miten matkatilaroamingin saa pois päältä.


jukke@jukke-laptop:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB1<*1>: Speed 9600: AT -- OK
ttyUSB1<*1>: Max speed is 9600; that should be safe.
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
jukke@jukke-laptop:~$ cat /etc/wvdial.conf

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CSQ
Init4 = AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
Password = enkerro
Phone = *99#
Modem Type = Analog Modem
Stupid Mode = 1
Baud = 9600
New PPPD = yes
Dial Command = ATDT
Modem = /dev/ttyUSB0
ISDN = 0
Username = kukatahansa
jukke@jukke-laptop:~$ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CSQ
AT+CSQ
+CSQ: 16,99
OK
--> Sending: AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Sun Oct 26 20:51:40 2008
--> Pid of pppd: 9717
--> Disconnecting at Sun Oct 26 20:51:41 2008
--> The PPP daemon has died: pppd options error (exit code = 2)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 2)

2
Laitealue / Vs: [ratkaistu]Dna mokkula
« : 26.10.08 - klo:18.30 »
Ja homma jatkuu :)

jukke@jukke-laptop:~$ sudo cat /etc/wvdial.conf
[sudo] password for jukke:

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CSQ
Init4 = AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
Password = enkerro
Phone = *99#
Modem Type = Analog Modem
Stupid Mode = 1
Baud = 9600
New PPPD = yes
Dial Command = ATDT
Modem = /dev/ttyUSB0
ISDN = 0
Username = kukatahansa
jukke@jukke-laptop:~$ ls ~/.wvdialrc
ls: cannot access /home/jukke/.wvdialrc: No such file or directory
jukke@jukke-laptop:~$ cat /etc/ppp/peers/wvdial
cat: /etc/ppp/peers/wvdial: No such file or directory

3
Laitealue / Vs: [ratkaistu]Dna mokkula
« : 26.10.08 - klo:15.26 »
Siinä olis koko setti taas, ja edelleen sama tilanne

jukke@jukke-laptop:~$ sudo wvdialconf
[sudo] password for jukke:
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB1<*1>: Modem Identifier: ATI -- Manufacturer: huawei
ttyUSB1<*1>: Speed 9600: AT -- OK
ttyUSB1<*1>: Max speed is 9600; that should be safe.
ttyUSB1<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB1<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
jukke@jukke-laptop:~$ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CSQ
AT+CSQ
+CSQ: 19,99
OK
--> Sending: AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Sun Oct 26 15:23:11 2008
--> Pid of pppd: 6624
--> Disconnecting at Sun Oct 26 15:23:12 2008
--> The PPP daemon has died: pppd options error (exit code = 2)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 2)

4
Laitealue / Vs: [ratkaistu]Dna mokkula
« : 25.10.08 - klo:10.06 »
samaa vieläkin...

jukke@jukke-laptop:~$ sudo wvdial
[sudo] password for jukke:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CSQ
AT+CSQ
+CSQ: 21,99
OK
--> Sending: AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Sat Oct 25 10:01:29 2008
--> Pid of pppd: 11526
--> Disconnecting at Sat Oct 25 10:01:29 2008
--> The PPP daemon has died: pppd options error (exit code = 2)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 2)

5
Laitealue / Vs: [ratkaistu]Dna mokkula
« : 25.10.08 - klo:08.50 »
Itselläni  on myös ongelmia mokkulan kanssa, kun sinä vain vilkkuu vihreä valo tasaisin ajoin mutta en pääse käyttämään nettiä.
Yritin seurata mummin tilannetta, mutta tipuin kyllä kyydistä jossain vaiheessa. Jos joltain siis löytyisi apua ongelmaani.

Kyseessä on dna mokkula. Ja seuraavanlaista tekstiä tulee kun laitan päätteeseen wvdial

jukke@jukke-laptop:~$ wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CSQ
AT+CSQ
+CSQ: 15,99
OK
--> Sending: AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
AT+CGDCONT=1,"IP","internet","0.0.0.0",0,0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Sat Oct 25 08:43:10 2008
--> Pid of pppd: 9817
--> Disconnecting at Sat Oct 25 08:43:11 2008
--> The PPP daemon has died: pppd options error (exit code = 2)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 2)
jukke@jukke-laptop:~$

6
Laitealue / Vs: Dna Matkanetin asetukset (RATKAISTU)
« : 17.11.07 - klo:12.39 »
Olen nyt jonkun aikaa hakannut päätäni seinään tuon dna mokkulan kanssa, eikä yllä olevatkaan tekstit oikein auttanut mnua. Niin mahtaisiko joku osata yksinkertaisesti selittää miten sen saisi toimimaan ubuntussa.

Sivuja: [1]