Näytä kirjoitukset

Tässä osiossa voit tarkastella kaikkia tämän jäsenen viestejä. Huomaa, että näet viestit vain niiltä alueilta, joihin sinulla on pääsy.


Viestit - Kokko

Sivuja: [1]
1
Laitealue / Vs: product: RV515 [Radeon X1300]?
« : 30.01.10 - klo:22.40 »
Jes, sain toimimaan päivittämällä kernelin...

2
Kiitos kaikille neuvoista...

3
Nyt sain jo kuvan näillä komennoilla hdmi:n, vga piuhairti.

sudo xrandr --newmode "1280x1024"   109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
xrandr --addmode DVI-0 1280x1024
Ja sitten järjestelmä/näyttö 1280x1024 (5:4)

Poistin xorg.conf:in kokonaan, vielä ku nuo sais taltee ni hyvä...

Edit: Siis tuokin on jo paljon, kuva on paljon tervämpi ja kirkkaampi...

4
No, nyt on dvi-->hdmi piuha hankittu. Mutta ei kuvaa, nyt molemmat piuhat kiinni vga toimii???

5
Jees, Kiitos infosta! Käyn huomenna ostamassa HDMI piuhan, ilmoittelen kuinka käy....

6
Järjestelmä/näyttö näyttää 1360x768 (16:9) resoa, kuva liian leveä oikealle ja kaikki isona.

Tv näyttää myös ton reson 1360x768@60Hz

Näyttiksestä dvi-vga adapterilla vga pihalla vga liittimessä,
Myös näyttiksen vga liittimellä on sama tilanne.

TV: Thomson 40FE9234B

Piuha/adapteri pitää tarkistaa kunhan saan sammutettua koneen,
emäntä makselee laskui toisel koneel, jaettu netti...




[ylläpito on poistanut liitteen]

7
Moi!

Sain työllä ja tuskalla Atin ajurit jotenkuten toimimaan, mutta nyt joutuu tekemään näin:

sudo xrandr --newmode "1280x1024"   109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync

xrandr --addmode VGA-0 1280x1024

Ja sitten järjestelmä/näyttö 1280x1024 (5:4) ni näkyy suht siedettävästi, mut tuokin riittäisi nyt aluksi...

Näyttis on: product: RV515 [Radeon X1300]

Näyttönä: 40" Thomson laajakuva tv

Missä mättää???

Kiitos etukäteen...

Tässä vielä xorg.conf:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
   Identifier     "X.org Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
   ModulePath   "/usr/lib/xorg/modules"
   FontPath     "/usr/share/fonts/X11/misc"
   FontPath     "/usr/share/fonts/X11/cyrillic"
   FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath     "/usr/share/fonts/X11/Type1"
   FontPath     "/usr/share/fonts/X11/100dpi"
   FontPath     "/usr/share/fonts/X11/75dpi"
   FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath     "built-ins"
EndSection

Section "Module"
   Load  "dbe"
   Load  "extmod"
   Load  "dri2"
   Load  "dri"
   Load  "record"
   Load  "glx"
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
EndSection

Section "InputDevice"
   Identifier  "Mouse0"
   Driver      "mouse"
   Option       "Protocol" "auto"
   Option       "Device" "/dev/input/mice"
   Option       "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
   Identifier   "Configured Monitor"
   VendorName   "Monitor Vendor"
   ModelName    "Monitor Model"
EndSection

Section "Device"
   Identifier  "Configured Video Device"
   Driver      "ati"
   VendorName  "ATI Technologies Inc"
   BoardName   "RV515 [Radeon X1300]"
   BusID       "PCI:4:0:0"
   Option          "DRI" "true"
   Option          "GARTSize" "64"
EndSection

Section "DRI"
        Mode 0666
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection


8
Onko tähän löytynyt ratkaisua? on nimittäin sama ongelma täällä!!!

Ainii, Winukas auttaa ctrl,alt,del silloin tällöin...


9
Laitealue / product: RV515 [Radeon X1300]?
« : 19.01.10 - klo:18.56 »
Onko mitään toivoa saada tuota toimimaan Ubuntu/9.10 karmic:ssa?

miikka@miikka-desktop:~$ sudo lshw -C Display
  *-display:0 UNCLAIMED   
       description: VGA compatible controller
       product: RV515 [Radeon X1300]
       vendor: ATI Technologies Inc
       physical id: 0
       bus info: pci@0000:04:00.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: pm pciexpress msi bus_master cap_list
       configuration: latency=0
       resources: memory:d0000000-dfffffff(prefetchable) memory:febf0000-febfffff ioport:e000(size=256) memory:febc0000-febdffff(prefetchable)
  *-display:1 UNCLAIMED
       description: Display controller
       product: RV515 [Radeon X1300] (Secondary)
       vendor: ATI Technologies Inc
       physical id: 0.1
       bus info: pci@0000:04:00.1
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: pm pciexpress bus_master cap_list
       configuration: latency=0
       resources: memory:febe0000-febeffff


miikka@miikka-desktop:~$ lspci
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)
00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a3)
00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)
00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1)
00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
04:00.0 VGA compatible controller: ATI Technologies Inc RV515 [Radeon X1300]
04:00.1 Display controller: ATI Technologies Inc RV515 [Radeon X1300] (Secondary)

Sivuja: [1]